3854 research outputs found
Sort by
Micro-Cavity Fiber-Optic Pressure Sensor with Graphene Diaphragm
No full textMicro-cavity fiber-optic pressure sensor with exfoliated graphene diaphragm is fabricated and tested. Analytical modeling indicates that pursuing ultra-thin diaphragm may not be necessary while non-trivial geometry of the cavity and reduced strain of the diaphragm help increasing the responsivity of the sensor
XPS Studies of LSCF Interfaces afer Cell Testing
Get PDFThe motivation of this investigation is to explore the possibility of using the depth profile capability of XPS to study interfaces after SOFC button cell testing. The literature uses XPS to study various cathode materials but has devoted little to the understanding of various cathode interfaces especially after testing. In this work, an SOFC button cell is first tested, and then, the LSCF cathode, barrier layer, and electrolyte are sputtered away to study the behavior of different interfaces. This work has shown that some elements have moved into other layers of the SOFC cell. It is argued that the migration of the elements is partly due to a redeposition mechanism after atoms are sputtered away, while the rest is due to interdiffusion between the SDC and YSZ layers. However, additional work is needed to better understand the mechanism by which atoms move around at different interfaces. The cell electrochemical performance is also discussed in some details but is not the focus
Corrigendum to “Hydrogen production from biomass using dark fermentation”
No full textThe authors regret to inform, that our article misses information regarding titles and references for the figures
Electrical Characteristics of Polypropylene Mixed with Natural Nanoclay
Get PDFPolypropylene has been used in radio-frequency capacitors and has also started to be employed in cables as insulation. The objective of this study was to evaluate the electrical properties of polypropylene filled with natural clay as a nano-material. Polypropylene samples having 0%, 2% and 6% natural clay by weight were exposed to 60-Hz sinusoidal voltages at two different rates of rise. The breakdown voltage of each sample was recorded at these different ramp rates. Also, the Root-mean-squared (rms) current was measured as the voltage was increased across the test samples. The important findings of this study were (a) the breakdown strength of the natural nanoclay-filled polypropylene was higher than the unfilled polypropylene, and the optimum concentration of nanoclay appeared to be 2% by weight; (b) the current density as a function of the electric-field intensity indicated a non-linear behavior with saturation, and the saturation onset took place at a higher electric-field intensity in nanoclay-filled polypropylene, wherein 2% nanoclay seemed to be the optimum concentration as well for the onset electric field of saturation
Lamellipodia in Stationary and Fluctuating States
No full textWe review recent mathematical models describing the diffusive transport, reaction, and turnover of actin and regulators at the leading edge of motile cells. These models are motivated by experimental results using cells with flat, steady lamellipodia studied by Single Molecule Speckle microscopy. The same cells can also be made to exhibit protruding and retracting lamellipodia, which demonstrate how changes in actin polymerization lead to changes in the rate of protrusion. The second part of this chapter provides a description of these fluctuations as an excitable actin system pushing against the cell membrane by polymerization
How to Build a Patient-Specific Hybrid Simulator for Orthopaedic Open Surgery: Benefits and Limits of Mixed-Reality Using the Microsoft HoloLens
Get PDFOrthopaedic simulators are popular in innovative surgical training programs, where trainees gain procedural experience in a safe and controlled environment. Recent studies suggest that an ideal simulator should combine haptic, visual, and audio technology to create an immersive training environment. This article explores the potentialities of mixed-reality using the HoloLens to develop a hybrid training system for orthopaedic open surgery. Hip arthroplasty, one of the most common orthopaedic procedures, was chosen as a benchmark to evaluate the proposed system. Patient-specific anatomical 3D models were extracted from a patient computed tomography to implement the virtual content and to fabricate the physical components of the simulator. Rapid prototyping was used to create synthetic bones. The Vuforia SDK was utilized to register virtual and physical contents. The Unity3D game engine was employed to develop the software allowing interactions with the virtual content using head movements, gestures, and voice commands. Quantitative tests were performed to estimate the accuracy of the system by evaluating the perceived position of augmented reality targets. Mean and maximum errors matched the requirements of the target application. Qualitative tests were carried out to evaluate workload and usability of the HoloLens for our orthopaedic simulator, considering visual and audio perception and interaction and ergonomics issues. The perceived overall workload was low, and the self-assessed performance was considered satisfactory. Visual and audio perception and gesture and voice interactions obtained a positive feedback. Postural discomfort and visual fatigue obtained a nonnegative evaluation for a simulation session of 40 minutes. These results encourage using mixed-reality to implement a hybrid simulator for orthopaedic open surgery. An optimal design of the simulation tasks and equipment setup is required to minimize the user discomfort. Future works will include Face Validity, Content Validity, and Construct Validity to complete the assessment of the hip arthroplasty simulator