Advanced Materials and Processes Research Institute

Advanced Materials and Processes Research Institute, Bhopal
Not a member yet
    809 research outputs found

    Mechanical behaviour of rapidly solidified aluminium-silicon ribbon-polyester composites.

    No full text

    New Idustrial uses of pyrophyllite mineral.

    No full text

    Interfaces in metal wire metal matrix composites prepared by liquid metallurgy techniques.

    No full text

    SEM observations on the origin of toughness of natural fibres polymer composites.

    No full text

    Mechanisms of material removal during low stress and high stress abrasion of aluminum alloy-zircon particle composites

    No full text
    (Al11.8Si4.0Mg alloy)-zircon particle composites containing zircon particle (size, 100 μm) volume fractions of 0.15 and 0.35 have been prepared by liquid metallurgy techniques. The low stress abrasion resistance of these composites was tested using a rubber wheel abrasion test apparatus with American Foundrymen's Society 50–70 mesh rounded quartz abrasive. Scratch tests were performed on metallographic surfaces of composites using a fixed-depth scratch test apparatus in order to simulate the high stress pin-on-drum abrasion test.\ud \ud The results show that the low stress abrasive wear rate of the aluminum alloy was decreased by a factor of 5 as a result of the dispersion of the 0.35 volume fraction of zircon particles. The wear rate of the composite containing a zircon particle volume fraction of zircon 0.35 (a Vickers hardness of 144 HV) under the low stress condition was found to be equal to that of normalized AISI 1045 steel (197 HV). Scanning electron microscopy micrographs of the composite surfaces abraded under low stress conditions show that the zircon particles stand proud of the matrix without any particle pull-out or interfacial debonding. Material removal mechanisms during low stress abrasion of the composites appear to be governed by microfracture of zircon particles, leading to subsequent pit formation. There is a direct correlation between material removal mechanisms during fixed-depth scratch testing and high stress pin-on-drum abrasion. In both cases there was catastrophic fragmentation of the zircon particles

    Development of antiwear and chemically durable tiles from themal wastes.

    No full text

    Effect of salts on setting time of Portland cement

    No full text

    16

    full texts

    809

    metadata records
    Updated in last 30 days.
    Advanced Materials and Processes Research Institute, Bhopal
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇