RepOD Repository for Open Data
Not a member yet
3261 research outputs found
Sort by
In search of the Hellenistic architecture in Nea Paphos. Architectural studies of Tomb 8 from the “Tombs of the Kings” necropolis in a wider framework of the Hellenistic funeral architecture of the Eastern Mediterranean
No full textThe aim of the project was to conduct detailed architectural research on Tomb 8 from the Tombs of the Kings necropolis in Nea Paphos, Cyprus (covering its form, structure, and architectural decoration), along with a comparative analysis of analogous tombs from ancient Macedonia and Egypt, which exerted strong artistic influences on the island. This analysis allows the architecture of the studied monument to be placed within the broader context of the Eastern Mediterranean. Since Tomb 8 is dated to the Hellenistic period, it constitutes an exceptionally valuable monument against the background of the predominantly Roman architecture of Nea Paphos. The objective of the research was therefore not only to expand knowledge about the tomb itself and, more broadly, about the necropoleis of Paphos, but also about the ancient city during the little-studied Hellenistic period in terms of architecture.The primary task of the research project was to prepare documentation of the architecture of Tomb 8. The entire structure of the hypogeum was documented. The tomb was also equipped with rich architectural decoration attached to the rock structure, which was destroyed already in antiquity, most likely during an earthquake. Its elements lay in the form of mixed debris, which significantly complicated the identification of individual architectural structures.As part of the research, the form was determined and 196 fragments of architectural decoration were documented: 3 slabs; 53 column fragments (9 bases, 5 capitals, 39 drums); 6 imposts; 3 types of architraves (18, 13, and 2 elements respectively); 15 ceiling slab fragments; 22 fragments of a horizontal cornice with gutter; fragments of two different triangular pediments consisting of horizontal and raking cornices (4 fragments of a dentil cornice, including 2 corners; and 17 fragments of a cornice with linear moulding, including 3 corners and 14 raking elements); 5 fragments of other cornices; 4 pilaster fragments; 2 covers of loculi; 6 fragments of small cippi; 4 acroteria; 1 fragment of a frieze; 1 fragment of a naiskos; 3 blocks with relief decoration in plaster; 4 partition-wall blocks; 3 doorjamb blocks; 2 voussoirs; and 1 block with a slanting upper surface.The fragments of architectural decoration were described, measured, and photographed during fieldwork. Subsequently, 3D models were produced, which served as the basis for the preparation of 2D documentation of the tomb and its decorative blocks (plans, sections, elevations). The next stage consisted of a 3D reconstruction of the entire tomb and its architectural setting.Please consult the Readme.txt file for additional information.</p
Pope Francis's authority in the digital age
No full textThe data covers selected digital news media content, YouTube content, digital media diaries, in-depth interviews, and movie productions. The study employed discourse theoretical analysis (DTA), film language analysis. The data was collected as part of the project titled "Papal Authority Transformed by Changes in Communication," which was conducted at the University of Silesia in Katowice between the years 2019 and 2024. The project received funding from the National Science Centre, Poland (grant no. 2019/35/B/HS2/00016) under the Opus 18 scheme.The data was prepared in Polish due to the fact that most of the material analysed in the study was in Polish. Only File 4: Movies_ Coded_Segments contains the analysis of material in English.Please consult the readme file for more information.</p
ICIPs' performance based on T2SLs InAs/InAsSb
No full textThe measured data of the cascade detectors intended to operate in longwavelength range based on the type-II superlattice InAs/InAsSb. I-V curves, dynamic resistance, responsivity, noise, detectivity and gain.</p
Electrospun nanofibers with pomegranate peel extract as a new concept for treating oral infections
No full textDissolution.xlsx - data represent the percentage of rutin released. Columns indicate the systems tested, rows the corresponding time points. Using an Agilent 708-DS dissolution device, electrospun nanofibers were studied for their dissolution behaviors. A typical basket method was applied, stirring at 50 rpm and 37 ± 0.5 °C. Nanofibers were added to 300 mL of artificial saliva solution and adjusted to pH to 6.8 with 1 M HCl. At certain intervals (0,25, 0,5, 1, 2, 4, 6, 12, 24h), liquid samples were taken, and an equivalent volume of medium that had been adjusted for temperature was added. A nylon membrane filter with a diameter of 0.45 μm was used to filter the samples. The concentration was determined using the HPLC method (https://doi.org/10.3390/ma17112558) and converted, relative to the weight, into the percentage of the substance released during the experiment.Mucoadhesion.xlsx - data represent the component of bioadhesion. Columns indicate the systems tested, rows the rate of shear. Data are presented in cps. The viscosity values were evaluated at shear rate from 5 to 20 1/s using a LV-3 spindle Brookfield DV2T viscometer at 25 °C, assessed using Rheocalc T software. Component of bioadhesion was presented as the viscosity of the samples.</p
Fluidized bed gasification of cattle manure and poultry litter
No full textThis collection contains research data obtained within the project titled “The influence of aluminosilicate additives on high-temperature corrosion and ash properties of animal-origin biomass”, funded by the National Science Centre (Poland) nr 2021/43/D/ST8/02609.The dataset contains:The results of the fluidized bed gasification of cattle manure, poultry litter and beech woodThree fuels are investigated: cattle manure (CM), poultry litter (PL) and beech wood (BW) as a reference fuel.The investigated temperature was 850 °C.The experiments were conducted in a fluidized bed reactor under various atmospheres, including N2, CO2, and O2. Please consult the Readme.txt file for additional information.</p
Hunted or something else? Investigating ‘after-impact’ perforations in prehistoric seal scapulae from ˇSventoji, Lithuania
No full textTraceological and experimental data that had been the basis for conclusions drawn in the published article (https://doi.org/10.1016/j.jasrep.2024.104929).</p
Zbiór danych dla właściwości termofizycznych wody (model SPC/E) w zakresie temperatur 250 - 400 K oraz w zakresie ciśnień do 1000 MPa
No full textTen zbiór danych zawiera dane z analiz opublikowanych w artykule: Bernadeta Jasiok, Alexander A. Pribylov, Eugene B. Postnikov, Pascale Friant-Michel, Claude Millot, Thermophysical properties of the SPC/E model of water between 250 and 400 K at pressures up to 1000 MPa, Fluid Phase Equilibria, Volume 584, 2024, 114118, https://doi.org/10.1016/j.fluid.2024.114118.Plik structure.zip zawiera poszczególne rdf:- pierwsza kolumna z numerem wiersza: bezużyteczna- kolekne kolumny: gOO(r), nOO(r), gOH(r), nOH(r), gHO(r), nHO(r), gHH(r), nHH(r)NAB(R) to numery koordynacyjnegOH(r) = gHO(r)gOO(r), - k_B T ln(gOO(r)) daje potencjał średniej siły odpowiadający zmienności energii swobodnej, gdy dwa atomy (cząsteczki) znajdują się z nieskończonej odległości od siebie na odległość rPlik Water_SPCE.zip zawiera poszczególne pliki danych (10T – 13P lub 13P – 10T)Wartości temperatury [K]: 250.15, 270.15, 290.15, 298.15, 310.15, 320.15, 340.15, 360.15, 380.15, 400.15Wartości ciśnienia [MPa]: 0.1, 25, 50, 75, 100, 150, 200, 300, 400, 500, 600, 800, 1000gęstość [kg/m3] ze słupkiem błędu (z symulacji NPT): 2 plikiobjętość 1000 cząsteczek ze słupkami błędów (z symulacji NPT): 1 plikWłaściwości termodynamiczne (podejście fluktuacyjne) wraz ze słupkami błędówpojemność cieplna przy stałym ciśnieniu (z symulacji NPT 40M kroków czasowych): 2 plikipojemność cieplna przy stałej objętości (z symulacji NVT 10 M kroków czasowych): 2 plikiizobaryczny współczynnik rozszerzalności termicznej (z symulacji NPT 40 mln kroków czasowych): 2 plikiwspółczynnik ściśliwości izotermicznej (z symulacji NPT 40 mln kroków czasowych): 2 plikiWłaściwości termodynamiczne (podejście termodynamiczne) wraz ze słupkami błędówpojemność cieplna przy stałym ciśnieniu (z symulacji NPT 40M kroków czasowych): 2 plikipojemność cieplna przy stałej objętości (z ekstrapolacji i dopasowania na podstawie wstępnych symulacji NPT): 2 plikiizobaryczny współczynnik rozszerzalności termicznej (z symulacji NPT 40 mln kroków czasowych ): 2 plikiwspółczynnik ściśliwości izotermicznej (z symulacji NPT 40 mln kroków czasowych): 2 plikiPrędkość dźwięku (podejście fluktuacyjne, podejście termodynamiczne): 8 plików</p
Experimental Study of EGCG Release from Ti6Al4V Coatings
No full textFiles include the data presented in the manuscript entitled "Controlled EGCG Release from Zeolite-Coated Ti6Al4V: Effects of Divalent Ions on Release and Cytotoxicity" by W. Stachowicz et al.Data (.csv) includes:FTIR.tabData (.jpg) includes:FTIR_map_ZnZeoTi.jpgFTIR_map_ZnZeoTiEGCG.jpgFTIR_map_MgZeoTi.jpgFTIR_map_MgZeoTiEGCG.jpgFTIR_map_CaZeoTi.jpgFTIR_map_CaZeoTiEGCG.jpgData (.tif) includes:SEM_CaZeoTi_1kx.tifSEM_CaZeoTi_5kx.tifSEM_CaZeoTiEGCG_1kx.tifSEM_CaZeoTiEGCG_5kx.tifSEM_MgZeoTi_1kx.tifSEM_MgZeoTi_5kx.tifSEM_MgZeoTiEGCG_1kx.tifSEM_MgZeoTiEGCG_5kx.tifSEM_ZnZeoTi_1kx.tifSEM_ZnZeoTi_5kx.tifSEM_ZnZeoTiEGCG_1kx.tifSEM_ZnZeoTiEGCG_5kx.tifList of abbreviations:SEM – scanning electron microscopy;FTIR – Fourier-transform infrared spectroscopy;</p
Studies on resistive switching mechanisms in RRAM memory structures based on copper (II) oxide
No full textM. Ozga, R. Mroczynski, A. Wolska, M. Klepka, M. Godlewski, B.S. WitkowskiStudies on resistive switching mechanisms in RRAM memory structures based on copper (II) oxideSolid-State Electronics 228 (2025), 109140</p
Fabrication of conductive materials composed of nickel@silver core@shell nanoparticles with various shell thicknesses by a combination of chemical treatment and UV-Vis irradiation process
No full textCelem przeprowadzonych badań było rozwinięcie niskotemperaturowej metody otrzymywania powłok przewodzących na bazie nanocząstek nikiel-srebro o strukturze core-shell. W tym celu wykorzystano kombinację metody chemicznej (przy użyciu kwasu szczawiowego) oraz naświetlania promieniowaniem UV-Vis. Zbadano wpływ wraunków tych metod oraz grubości srebrnej otoczki Ni-Ag NP na właściwości prewodzące powłok na ich bazie.</p
Data sources:
Access Repository Dashboard
Do you manage RepOD Repository for Open Data? Access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard!