AMOLF Institutional Repository
Not a member yet
1351 research outputs found
Sort by
Solar Canvas: Nanoscale light management for ultra-thin, semi-transparent, and colourful solar cells
No full textThis thesis provides new solutions for integrable PV by exploiting nanophotonic principles in nanoscale architectures. It shows a high degree of control over the absorption/transmission spectrum by using optical waveguiding in either nanowires (NW) or thin films.
In Chapter 2, we focus on understanding the optical properties of vertically standing semiconductor NWs as promising building blocks for next generation photonics and photovoltaics. In Chapter 3, we explore in detail the potential of semiconductor NW-based solar cells as a powerful and tunable-in-design approach for wavelength-selective semi-transparent solar cells for BIPV. Optical simulations and experimental demonstration of PMDS-embedded NW arrays confirm that by changing diameter and periodicity one can engineer the absorption and transmission spectra of the NW array to provide a broad range of bright colours, semi-transparency and high PV performance. Chapter 4 focuses on ultrathin, high efficiency and flexible Si solar cells as another photonic-based solution to minimize the compromise of high conversion efficiency for aesthetics in solar cells. Here we present a new family of surface texturing, based on correlated disordered hyperuniform patterns, capable of manipulating scattering spectrum of the incident light to be efficiently coupled into the silicon slab optical modes. We experimentally demonstrate 66.5% solar light absorption in free-standing 1um c-Si layers by using these nanotextures. Finally, in Chapter 5, we combine the unique light waveguiding and absorption in vertically standing NWs with k-space engineering given by their arrangement into arrays to increase absorption in an ultra-thin tandem cell beyond the bulk limits.
The photonic and design concepts presented here combined with highly-performing PV materials make the intersection between high-efficiency, flexibility, colour-tunability and transparency closer to reality
Realistic Efficiency Limits for Singlet-Fission Silicon Solar Cells
Get PDFSinglet fission is a carrier multiplication mechanism that could make silicon solar cells much more efficient. The singlet-fission process splits one high-energy spin-singlet exciton into two lower-energy spin-triplet excitons. We calculated the efficiency potential of three technologically relevant singlet-fission silicon solar cell implementations. We assume realistic but optimistic parameters for the singlet-fission material and investigate the effect of singlet energy and entropic gain. If the transfer of triplet excitons occurs via charge transfer, the maximum efficiency is 34.6% at a surprisingly small singlet energy of 1.85 eV. For the Dexter-type triplet energy transfer, the maximum efficiency is 32.9% at a singlet energy of 2.15 eV. For Forster resonance energy transfer (FRET), the triplet excitons are first transferred into a quantum dot, from which they then undergo FRET into silicon. For this transfer mechanism, the maximum efficiency is 28.% at a singlet energy of 2.33 eV. We show that the efficiency gain from singlet fission is larger the more efficient the silicon base cell is, which stands in contrast to tandem perovskite-silicon solar cells
Grain Size Influences Activation Energy and Migration Pathways in MAPbBr3 Perovskite Solar Cells
Get PDFIon migration in perovskite layers can significantly reduce the long-term stability of the devices. While perovskite composition engineering has proven an interesting tool to mitigate ion migration, many optoelectronic devices require a specific bandgap and thus require a specific perovskite composition. Here, we look at the effect of grain size to mitigate ion migration. We find that in MAPbBr3 solar cells prepared with grain sizes varying from 2 to 11 μm the activation energy for bromide ion migration increases from 0.17 to 0.28 eV. Moreover, we observe the appearance of a second bromide ion migration pathway for the devices with largest grain size, which we attribute to ion migration mediated by the bulk of the perovskite, as opposed to ion migration mediated by the grain boundaries. Together, these results suggest the beneficial nature of grain engineering for reduction of ion migration in perovskite solar cells
Two birds with one stone: dual grain-boundary and interface passivation enables >22% efficient inverted methylammonium-free perovskite solar cells
Get PDFAdvancing inverted (p–i–n) perovskite solar cells (PSCs) is key to further enhance the power conversion efficiency (PCE) and stability of flexible and perovskite-based tandem photovoltaics. Yet, the presence of defects at grain boundaries and in particular interfacial recombination at the perovskite/electron transporting layer interface induce severe non-radiative recombination losses, limiting the open-circuit voltage (VOC) and fill factor (FF) of PSCs in this architecture. In this work, we introduce a dual passivation strategy using the long chain alkylammonium salt phenethylammonium chloride (PEACl) both as an additive and for surface treatment to simultaneously passivate the grain boundaries and the perovskite/C60 interface. Using [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) as a hole transporting layer and a methylammonium (MA)-free Cs0.18FA0.82PbI3 perovskite absorber with a bandgap of ∼1.57 eV, prolonged charge carrier lifetime and an on average 63 meV enhanced internal quasi-Fermi level splitting are achieved upon dual passivation compared to reference p–i–n PSCs. Thereby, we achieve one of the highest PCEs for p–i–n PSCs of 22.7% (stabilized at 22.3%) by advancing simultaneously the VOC and FF up to 1.162 V and 83.2%, respectively. Using a variety of experimental techniques, we attribute the positive effects to the formation of a heterogeneous 2D Ruddlesden–Popper (PEA)2(Cs1−xFAx)n−1Pbn(I1−yCly)3n+1 phase at the grain boundaries and surface of the perovskite films. At the same time, the activation energy for ion migration is significantly increased, resulting in enhanced stability of the PSCs under light, humidity, and thermal stress. The presented dual passivation strategy highlights the importance of defect management both in the grain boundaries and the surface of the perovskite absorber layer using a proper passivation material to achieve both highly efficient and stable inverted p–i–n PSCs
Reduced Barrier for Ion Migration in Mixed-Halide Perovskites
Get PDFHalide alloying in metal halide perovskites is a useful tool for optoelectronic applications requiring a specific bandgap. However, mixed-halide perovskites show ion migration in the perovskite layer, leading to phase segregation and reducing the long-term stability of the devices. Here, we study the ion migration process in methylammonium-based mixed-halide perovskites with varying ratios of bromide to iodide. We find that the mixed-halide perovskites show two separate halide migration processes, in contrast to pure-phase perovskites, which show only a unique halide migration component. Compared to pure-halide perovskites, these processes have lower activation energies, facilitating ion migration in mixed versus pure-phase perovskites, and have a higher density of mobile ions. Under illumination, we find that the concentration of mobile halide ions is further increased and notice the emergence of a migration process involving methylammonium cations. Quantifying the ion migration processes in mixed-halide perovskites shines light on the key parameters allowing the design of bandgap-tunable perovskite solar cells with long-term stability
Ultrafast Photoinduced Heat Generation by Plasmonic HfN Nanoparticles
Get PDFThere is great interest in the development of alternatives to noble metals for plasmonic nanostructures. Transition metal nitrides are promising due to their robust refractory properties. However, the photophysics of these nanostructures, particularly the hot carrier dynamics and photothermal response on ultrafast timescales, are not well understood. This limits their implementation in applications such as photothermal catalysis or solar thermophotovoltaics. In this study, the light-induced relaxation processes in water-dispersed HfN nanoparticles are for the first time, elucidated by fs transient absorption, Lumerical FDTD and COMSOL Multiphysics simulations and temperature-dependent ellipsometry. We unequivocally demonstrate that HfN nanoparticles convert absorbed photons into heat within <100 fs; no signature of hot charge carriers is observed. Interestingly, under high photon energy or intense irradiation stimulated Raman scattering characteristic of oxynitride surface termination is observed. These findings suggest that transition metal nitrides could offer benefits over noble metals in the field of plasmonic photothermal catalysis
Integrating sphere Fourier microscopy of highly directional emission
Get PDFAccurately controlling light emission using nano- and microstructured lenses and antennas is an active field of research. Dielectrics are especially attractive lens materials due to their low optical losses over a broad bandwidth. In this work we measure highly directional light emission from patterned quantum dots (QDs) aligned underneath all-dielectric nanostructured microlenses. The lenses are designed with an evolutionary algorithm and have a theoretical directivity of 160. The fabricated structures demonstrate an experimental full directivity of 61 ± 3, three times higher than what has been estimated before, with a beaming half-angle of 2.6°. This high value compared to previous works is achieved via three mechanisms. First, direct electron beam patterning of QD emitters and alignment markers allowed for more localized emission and better emitter–lens alignment. Second, the lens fabrication was refined to minimize distortions between the designed shape and the final structure. Finally, a new measurement technique was developed that combines integrating sphere microscopy with Fourier microscopy. This enables complete directivity measurements, contrary to other reported values, which are typically only partial directivities or estimates of the full directivity that rely partly on simulations. The experimentally measured values of the complete directivity were higher than predicted by combining simulations with partial directivity measurements. High directivity was obtained from three different materials (cadmium-selenide-based QDs and two lead halide perovskite materials), emitting at 520, 620, and 700 nm, by scaling the lens size according to the emission wavelength
Single‐molecule analysis of dynamics and interactions of the SecYEG translocon
Get PDFProtein translocation and insertion into the bacterial cytoplasmic membrane are the essential processes mediated by the Sec machinery. The core machinery is composed of the membrane-embedded translocon SecYEG that interacts with the secretion-dedicated ATPase SecA and translating ribosomes. Despite the simplicity and the available structural insights on the system, diverse molecular mechanisms and functional dynamics have been proposed. Here, we employ total internal reflection fluorescence microscopy to study the oligomeric state and diffusion of SecYEG translocons in supported lipid bilayers at the single-molecule level. Silane-based coating ensured the mobility of lipids and reconstituted translocons within the bilayer. Brightness analysis suggested that approx. 70% of the translocons were monomeric. The translocons remained in a monomeric form upon ribosome binding, but partial oligomerization occurred in the presence of nucleotide-free SecA. Individual trajectories of SecYEG in the lipid bilayer revealed dynamic heterogeneity of diffusion, as translocons commonly switched between slow and fast mobility modes with corresponding diffusion coefficients of 0.03 and 0.7 mu m(2)center dot s(-1). Interactions with SecA ATPase had a minor effect on the lateral mobility, while bound ribosome:nascent chain complexes substantially hindered the diffusion of single translocons. Notably, the mobility of the translocon:ribosome complexes was not affected by the solvent viscosity or macromolecular crowding modulated by Ficoll PM 70, so it was largely determined by interactions within the lipid bilayer and at the interface. We suggest that the complex mobility of SecYEG arises from the conformational dynamics of the translocon and protein:lipid interactions
High-yield parallel fabrication of quantum-dot monolayer single-electron devices displaying Coulomb staircase, contacted by graphene
Get PDFIt is challenging for conventional top-down lithography to fabricate reproducible devices very close to atomic dimensions, whereas identical molecules and very similar nanoparticles can be made bottom-up in large quantities, and can be self-assembled on surfaces. The challenge is to fabricate electrical contacts to many such small objects at the same time, so that nanocrystals and molecules can be incorporated into conventional integrated circuits. Here, we report a scalable method for contacting a self-assembled monolayer of nanoparticles with a single layer of graphene. This produces single-electron effects, in the form of a Coulomb staircase, with a yield of 87 ± 13% in device areas ranging from < 800 nm2 to 16 μm2, containing up to 650,000 nanoparticles. Our technique offers scalable assembly of ultra-high densities of functional particles or molecules that could be used in electronic integrated circuits, as memories, switches, sensors or thermoelectric generators