ARDC Research Data Australia
Not a member yet
438125 research outputs found
Sort by
Petroleum Well Locations - Queensland
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third part and are presented here as originally supplied.\n\n\n\nLocation of petroleum wells to identify where petroleum exploration and production wells have been drilled in Queensland.\n\n## **Dataset History** \n\nThe data set is part of the Natural Resources & Mines corporate geoscience data sets for Queensland which are held within the Geoscience & Resources Database (GRDB). These data are separately available in a variety of formats.\n\n## **Dataset Citation** \n\nQueensland Department of Natural Resources and Mines (2015) Petroleum Well Locations - Queensland. Bioregional Assessment Source Dataset. Viewed 11 April 2016, http://data.bioregionalassessments.gov.au/dataset/4f0b1e72-333e-47ed-b91a-0b4f4bed66eb.Petroleum Well Locations - Queensland - Data File<br/>
coalfields - ARC
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\nThis layer contains partial locations of identified coalfields in South Australia.\n\n## **Purpose** \n\nTo identify known coal locations.\n\n## **Dataset History** \n\nOriginal dataset was collected and digitised from the coalfields identified in the original 'Coal Deposits in South Australia' mineral information series (Department of Mines and Energy) 1984. Information provided by CSR Limited, Electricity Trust of South Australia, Meekatharra Minerals Limited, Western Mining Corporation Holdings Limited and Utah Development Company in compiling the 'Coal Deposits in South Australia' mineral information series.\n\n## **Dataset Citation** \n\nSA Department of Environment, Water and Natural Resources (2015) coalfields - ARC. Bioregional Assessment Source Dataset. Viewed 26 May 2016, http://data.bioregionalassessments.gov.au/dataset/3f9140c5-5915-4dbc-8884-bb144d5ef664.coalfields - ARC - Data File<br/>
Victorian Petroleum Wells 2014
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\n\n\nContains Petroleum Wells.\n\nPopulated from original well completion reports.\n\nThis is a different dataset from GEDIS boreholes (purpose = petroleum). The wells in both datasets overlap in most cases. This dataset is actively maintained.\n\n## **Dataset History** \n\nData Set Source: From Minerals and Petroleum's DbMap Oracle Database\n\n\n\nCollection Method:\n\n\n\nProcessing Steps: andr import_petrol_wells which reads dbmap - and updates GEDIS where necessary and then creates this dataset \n\n\n\nPositional Accuracy: Varies from 10 metres to 1km - accuracy is specified for each location \n\n\n\nAttribute Accuracy: Very Good \n\n\n\nLogical Consistency: No Specified\n\n## **Dataset Citation** \n\n"Victorian Department of State Development, Business and Innovation" (2014) Victorian Petroleum Wells 2014. Bioregional Assessment Source Dataset. Viewed 29 September 2017, http://data.bioregionalassessments.gov.au/dataset/bb3f4d30-3572-4ac4-ac77-ee281846f071.Victorian Petroleum Wells 2014 - Data File<br/>
NSW Office of Water Pump Test dataset
No full text## **Abstract** \n\nThis dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the Bioregional Assessment Programme based on the known details at the time of acquisition.\n\n\n\nThe pump test data has been extracted from the NSW Office of Water (NoW) corporate database and includes a 'test summary' and 'test reading' spreadsheet for each region.\n\n## **Dataset History** \n\nThis data was sourced from NSW Office of Water. No history of the dataset was provided.\n\n## **Dataset Citation** \n\nNSW Office of Water (2013) NSW Office of Water Pump Test dataset. Bioregional Assessment Source Dataset. Viewed 31 May 2018, http://data.bioregionalassessments.gov.au/dataset/d8f1062f-97d5-4d78-9ca8-b5719fe3fced.NSW Office of Water Pump Test dataset - Data File<br/>
NSW 2011 Census Population Counts and Density (Spatial)
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\n\n\nABS 2011 census data presented spatially in an ESRI files geodatabase. Derived from Tabular ABS 2011 Census data for NSW joined with Meshblocks for NSW downloaded from the ABS website.\n\n\n\nAs well as published "Persons" and "Dwellings" data an additional field "Persons_km2" was derived from the persons count and spatial area of the associated Mesh Block (see Lineage).\n\n## **Dataset History** \n\n2011 base level Census data for NSW was downloaded from the ABS website along with the spatial boundaries pertaining to the tabular data (NSW Mesh block shpaefiles). \n\n\n\nCensus data was joined to the Mesh block polygons based on the Mesh block ID and the combined attributes exported to a file geodatabase feature class. A field was added "Persons_km2) and a popultaion density for each mesh block polygon area was derived by dividing the "persons" in that mesh block by the polygon area (based on Aust Albers projection) factored to calculate persons per square km.\n\n## **Dataset Citation** \n\nAustralian Bureau of Statistics (2014) NSW 2011 Census Population Counts and Density (Spatial). Bioregional Assessment Source Dataset. Viewed 14 June 2018, http://data.bioregionalassessments.gov.au/dataset/90662127-a559-493b-9d65-df44270aeb0a.NSW 2011 Census Population Counts and Density (Spatial) - Data File<br/>
Macalister Irrigation District (MID) stream clip
No full text## **Abstract** \n\nThis dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the Bioregional Assessment Programme based on known details at the time of acquisition.\n\n\n\nDetailed Hydrology clipped from the Victorian hydrology 25k layer around the Macalister Irrigation District.\n\n## **Purpose** \n\nFor illustration purposes around the MID.\n\n\n\nVicmap Hydro provides an accurate representation of natural and man made Hydrographic features across Victoria, at a capture scale of 1:25,000. It is used in a variety of applications, particularly in emergency services, natural resource management, planning and development, and digital map publication.\n\n## **Dataset History** \n\nClipped for illustration purposes only\n\nAlso see https://www.data.vic.gov.au/ search for Vicmap hydro layer for further details\n\n## **Dataset Citation** \n\nVictorian Department of Economic Development, Jobs, Transport and Resources (2016) Macalister Irrigation District (MID) stream clip. Bioregional Assessment Source Dataset. Viewed 05 October 2018, http://data.bioregionalassessments.gov.au/dataset/b755238b-cedb-47d7-9fab-333239cfe724.Macalister Irrigation District (MID) stream clip - Data File<br/>
Potentiometric Surface Cadna-Owie Hooray grid v02
No full text## **Abstract** \n\nThis dataset was derived by the Bioregional Assessment Programme. The source dataset is identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement.\n\n\n\nThis dataset show the potentiometric surface for the Cadna-Owie/Hooray aquifer of the Great Artesian Basin as continuous raster. The raster dataset is derived using contour input data sourced from: Great Artesian Basin - Cadna-owie Hooray Potentiometric Surface, GUID: a72d30b3-29de-46a6-a467-990396860bd4\n\n## **Purpose** \n\nThis dataset provides a continuous potentiometric surface for the Cadna-Owie/Hooray aquifer to enhance the visualisation of groundwater pressure data within the aquifer\n\n## **Dataset History** \n\nThis dataset was created by interpolating input contour line features from the dataset: Potentiometric surface for the Cadna-owie-Hooray and equivalents Aquifer, GUID: bbf78bf8-9ef6-42c1-861d-b2f57afd9805, into a gridded surface using the Topo To Raster tool (Spatial Analayst) in ArcGIS.\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (2016) Potentiometric Surface Cadna-Owie Hooray grid v02. Bioregional Assessment Derived Dataset. Viewed 05 July 2017, http://data.bioregionalassessments.gov.au/dataset/9d985407-7c95-4fda-95c1-85e6aa40dc5f.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Great Artesian Basin - Cadna-owie Hooray Potentiometric Surface](https://data.gov.au/data/dataset/a72d30b3-29de-46a6-a467-990396860bd4)\n\nPotentiometric Surface Cadna-Owie Hooray grid v02 - Data File<br/>
Cumberland subregion BIO Map Core Areas 20150804
No full text## **Abstract** \n\nThis data and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are represented here as originally supplied.\n\n\n\nThe Biodiversity Investment Opportunities Map (BIO Map) is a key deliverable of the NSW Government's $40 million Green Corridors program, a Government priority action identified in NSW 2021: A Plan to make NSW number one. The map was prepared with funding provided by the NSW Environmental Trust. BIO Map has been prepared for the Cumberland subregion, a 275 693-hectare area containing the Cumberland Plain, a broad shale basin in Western Sydney. The areas identified for investment are termed priority investment areas, and include core areas (this layer) and biodiversity corridors of regional significance. Mapping criteria were used to identify and map priority investment areas, and targeted stakeholder consultation was conducted to inform the outputs of the project. Stakeholders consulted included the Commonwealth Department of the Environment, six state government authorities, 16 local councils and eight non-government organisations. The final Cumberland subregion BIO Map identifies a network of 87 core areas and 27 regional biodiversity corridors within the Cumberland subregion. The 87 core areas include all of the Priority Conservation Lands identified by the Cumberland Plain Recovery Plan. The total area represented within the mapped priority investment areas is 42,124 hectares. Mapped core areas make up 24,197 hectares. The BIO Map project aims to achieve better biodiversity outcomes by directing biodiversity investment funding to the strategic locations of greatest benefit. A landholder's right to carry out agricultural and developmental activities on their land are not altered by their property being identified as a priority investment area on the BIO Map. The BIO Map identifies areas where landowners have more opportunities to receive funding to protect their bushland. Any involvement by a landowner in such programs is entirely voluntary.\n\n## **Purpose** \n\nThe BIO Map project aims to achieve better biodiversity outcomes by directing biodiversity investment funding to the strategic locations of greatest benefit\n\n## **Dataset History** \n\nThis data and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are represented here as originally supplied.\n\n\n\nLineage: Lineage: Core areas are areas of native vegetation and habitat where management will be of greatest benefit to the conservation of state and regional biodiversity values within a region. Combined with state and regional corridors, the areas are termed Priority Investment Areas (PIAs) An updated vegetation map of the study area, where areas cleared up to 2012 were removed, was combined with a Biodiversity Forecaster Tool (BFT) analysis, assessment of current and future land use and connectivity and patch size considerations to identify core areas for the Cumberland subregion. The Plant Community Types (PCTs) mapped in the Cumberland subregion were used to define 30 key state and regional biodiversity values to be included in core areas. Core areas were then identified to represent each of these values to a minimum level of 15% of their existing extent within the Cumberland subregion. The minimum representation of 15% was selected to maintain consistency with the target used to define the Priority Conservation Lands (PCLs) identified by the Cumberland Plain Recovery Plan. This target recognises that many vegetation communities within the Cumberland subregion are substantially cleared and highly fragmented and face ongoing land-use and clearing pressure. The PCLs were incorporated into the BIO Map core areas as a first step. This layer satisfied the target for many PCTs. Lands identified by OEH in a high management viability (HMV) review were also included. Nine PCTs where the target was not met by the PCLs and HMV lands were then targeted for inclusion in core areas, based on patch size, connectivity, BFT result and current and future land use considerations (i.e. viability). The boundaries of these new core areas were predominantly defined using vegetation and/or cadastral boundaries. Many of the key state and regional biodiversity values substantially exceeded the minimum 15% representation target within the 87 core areas identified. Land within regional biodiversity corridors, which does not count towards the minimum target, also considerably increases the representation of some key state and regional biodiversity values within the PIAs. In total the 87 core areas occupy approxiamtely 24,197 hectares. This represents approximately 9% of the Cumberland subregion, or approximately 35% of all mapped vegetation within the subregion. 42 124 hectares are mapped as PIAs when both core areas and corridors are considered . This represents approximately 15% of the Cumberland subregion, or approximately 61% of all mapped vegetation within the subregion. Positional accuracy: Digitising was conducted at a scale of approximately 1:10,000-1:15,000. Attribute accuracy: All attributes have been checked. Completeness: The layer is complete. The layer will require periodic updating to account for any clearing or vegtetation change resulting from future landuse activites.\n\n## **Dataset Citation** \n\nNSW Office of Environment and Heritage (2015) Cumberland subregion BIO Map Core Areas 20150804. Bioregional Assessment Source Dataset. Viewed 18 June 2018, http://data.bioregionalassessments.gov.au/dataset/14bda271-f0e8-4bfb-91dd-865f8b311d29.Cumberland subregion BIO Map Core Areas 20150804 - Data File<br/>
Galilee GW boundary and initial conditions
No full text## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme. The source dataset is identified in the Lineage field in this metadata statement.\n\nThe processes undertaken to produce this derived dataset are described in the History field in this metadata statement. \n\n\n\nThe boundary and initial conditions of the GAL AEM, such as the Belyando River, the extent of the alluvium or Betts Creek bed formation and the mine footprints, are generated as part of dataset GAL_AEM_models as csv-files. This dataset uses the information in these csv-files for visualisation.\n\n## **Dataset History** \n\nDataset GAL_AEM models describes how the boundary and initial conditions are generated from their respective source dataset, mostly by coarsely digitising by hand in ArcGIS 10.2. This data sets takes the geographical information contained in these spreadsheets (i.e. the coordinates of polyline or polygon vertices) for visualisation in maps, contained in GAL262 (Peeters et al. 2016). \n\n\n\nThese files include:\n\nGAL_Alluvium_Line.csv: Polyline representing the center line of the alluvial deposits\n\nGAL_BCB.csv: Polyline representing the eastern extent of the Betts Creek Bed formation\n\nGAL_mine_footprints.csv: Polygons representing the mine footprints in the groundwater model\n\nGAL_river.csv: Polyline representing the Belyando River in the groundwater model\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (2016) Galilee GW boundary and initial conditions. Bioregional Assessment Derived Dataset. Viewed 10 December 2018, http://data.bioregionalassessments.gov.au/dataset/97400f76-ce97-4a54-a7ab-e41710628de2.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Galilee Hydrological Response Variable (HRV) model](https://data.gov.au/data/dataset/facb2291-249c-4903-93ce-d9c3f83e7640)\n\n* **Derived From** [Galilee groundwater numerical modelling AEM models](https://data.gov.au/data/dataset/2698f3c2-b8d4-4b4e-899c-d50e0e1aac1f)\n\n* **Derived From** [Geoscience Australia GEODATA TOPO series - 1:1 Million to 1:10 Million scale](https://data.gov.au/data/dataset/310c5d07-5a56-4cf7-a5c8-63bdb001cd1a)\n\n* **Derived From** [Surface Geology of Australia, 1:2 500 000 scale, 2012 edition](https://data.gov.au/data/dataset/4a91fff8-ed51-4994-b358-066497e25c8c)\n\n* **Derived From** [Galilee model HRV receptors gdb](https://data.gov.au/data/dataset/ee766aad-3849-4a5a-92b7-ff4098bd874e)\n\nGalilee GW boundary and initial conditions - Data File<br/>
State Rated Species Mammals - PED
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\nShows the locations species that are listed under the SA NPW Act 1972 or the Parks and Wildlife Conservation Act 2000 have been recorded in the Biological Database of South Australia or the Atlas of Living Australia.\n\n## **Purpose** \n\nTo indicate the locations of species that are listed under the SA NPW Act 1972 or TPWC Act 2000.\n\n## **Dataset History** \n\nDataset developed for the Lake Eyre Basin Bioregional Assessment: Context statement for the Pedirka subregion. The locational information for biological survey sites is collected in a number of formats, with older surveys in the pastoral region being read from maps at various scales (may be up to 1:250,000) and newer surveys using GPS.\n\n## **Dataset Citation** \n\nSA Department of Environment, Water and Natural Resources (2015) State Rated Species Mammals - PED. Bioregional Assessment Source Dataset. Viewed 12 October 2016, http://data.bioregionalassessments.gov.au/dataset/847d00e8-ad76-469a-a9f4-db36010c2125.State Rated Species Mammals - PED - Data File<br/>