ARDC Research Data Australia
Not a member yet
438125 research outputs found
Sort by
Clarence-Moreton AWRA-L calibration results
No full text## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement. \n\n\n\nThis dataset provides the calibration metrics that describe the results of the AWRA-L model calibration process for the RIchmond river basin. This compares the model predictions with the measured stream flow at 9 stream flow gauging stations in the area. Summary of the "normal" and "low flow" AWRA-L model calibration metrics undertaken in the Richmond river basin (4 May 2015).\n\n## **Purpose** \n\nTo provide calibration summary of model efficiency etc. for the AWRA-L model in the Richmond river basin.\n\n## **Dataset History** \n\nStarted with the time series of AWRA-L model predictions for 2 calibrations (1: normal, 2: low flow) at 9 stream flow gauging stations.\n\n\n\nCompared these predictions to the measured stream flow at the same 9 stream flow gauging stations.\n\n\n\nThese comparisons are expressed through 3 metrics that compare the daily predictions with the observed data for both calibrations at each of the 9 stream flow gauging stations.\n\n\n\n1) F value\n\n2) daily flow efficiency\n\n3) Bias\n\n\n\nDetails of the metrics themselves are in CLM 2.6.1: Table 4\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (2015) Clarence-Moreton AWRA-L calibration results. Bioregional Assessment Derived Dataset. Viewed 28 September 2017, http://data.bioregionalassessments.gov.au/dataset/f045bb10-27a5-4cf5-8cd4-fc4c13e73453.\n\n## **Dataset Ancestors** \n\n* **Derived From** [CLM Richmond River basin surface water modelling domain](https://data.gov.au/data/dataset/c44f400a-5f44-4f5f-a22f-533e90afd8c5)\n\n* **Derived From** [Clarence-Moreton AWRA-L model results](https://data.gov.au/data/dataset/70b00454-f9b5-4f12-9f97-9d08cc8cd8b0)\n\n* **Derived From** [CLM - AWRA Calibration Gauges SubCatchments](https://data.gov.au/data/dataset/af6476a5-02e7-4916-8151-504896729ce6)\n\n* **Derived From** [BILO Gridded Climate Data: Daily Climate Data for each year from 1900 to 2012](https://data.gov.au/data/dataset/7aaf0621-a0e5-4b01-9333-53ebcb1f1c14)\n\n* **Derived From** [CLM - NSW Office of Water Gauge Data for Tweed, Richmond & Clarence rivers. Extract 20140901](https://data.gov.au/data/dataset/a4b5b711-57c4-4b02-bd8b-a05d7379f319)\n\n* **Derived From** [CLM16swg Surface water gauging station data within the Clarence Moreton Basin](https://data.gov.au/data/dataset/1e4cdb84-10cf-4772-91fc-820688dc9aef)\n\n* **Derived From** [CLM - Unified streamflow data (mm) for 9 catchments in NSW](https://data.gov.au/data/dataset/4d10e50a-8ff5-4319-999e-8294f6600781)\n\n* **Derived From** [CLM - NSW River Gauge pdf documents.](https://data.gov.au/data/dataset/ffc17844-006c-40e8-adcd-53e75efb530f)\n\n* **Derived From** [GEODATA 9 second DEM and D8: Digital Elevation Model Version 3 and Flow Direction Grid 2008](https://data.gov.au/data/dataset/ebcf6ca2-513a-4ec7-9323-73508c5d7b93)\n\n* **Derived From** [CLM Modelled rainfall predictions](https://data.gov.au/data/dataset/75ab5801-cb68-4d90-a13b-9df1cdba10cc)\n\n* **Derived From** [Climate model 0.05x0.05 cells and cell centroids](https://data.gov.au/data/dataset/3df5188b-f027-4d51-99a8-45e2800f29c8)\n\n* **Derived From** [CLM - Streamflow unified NSW](https://data.gov.au/data/dataset/1e848ee6-4f79-469d-90c9-34596828b364)\n\n* **Derived From** [Mean Annual Climate Data of Australia 1981 to 2012](https://data.gov.au/data/dataset/02418c67-f8bb-48a8-88a3-2a5c6b485f78)\n\
HUN Quantile footprints v01
No full text## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement. \n\n\n\nVector and raster representation of the ACRD drawdown extents for the 5th, 50th and 95th quantiles for three depth thresholds 0.2m, 2m and 5m. Used for mapping.\n\n## **Dataset History** \n\nACRD drawdown values per Assessment unit were taken from the input csv files and joined to the input Assessment unit layer. Through series of selections and dissolving (ArcGIS tool DISSOLVE) a series of vector and raster footprint layers were created for the various each combination of quantile and depth threshold. The quantiles being 5 (q05), 50 (q50)and 95 (q95). The threshold depths being 0.2m (gt02), 2m (gt20) and 5m (gt50).\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (XXXX) HUN Quantile footprints v01. Bioregional Assessment Derived Dataset. Viewed 13 March 2019, http://data.bioregionalassessments.gov.au/dataset/ef121949-ec88-48d3-a98c-d1c765ff034c.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Bioregional Assessment areas v02](https://data.gov.au/data/dataset/e414b1b3-c42e-42e9-9cc4-2093054aa35f)\n\n* **Derived From** [Hunter subregion boundary](https://data.gov.au/data/dataset/2b704127-f134-45ca-afc7-2ce19c892c87)\n\n* **Derived From** [Natural Resource Management (NRM) Regions 2010](https://data.gov.au/data/dataset/1d54e38f-4051-4f0c-a350-c7dbd8eba65b)\n\n* **Derived From** [Bioregional Assessment areas v03](https://data.gov.au/data/dataset/96dbf469-5463-4f4d-8fad-4214c97e5aac)\n\n* **Derived From** [HUN GW Model code v01](https://data.gov.au/data/dataset/e54a1246-0076-4799-9ecf-6d673cf5b1da)\n\n* **Derived From** [HUN Groundwater tables 20170421](https://data.gov.au/data/dataset/87661c96-d774-4347-8357-858a4a1395a9)\n\n* **Derived From** [HUN Assessment Units 1000m 20160725 v02](https://data.gov.au/data/dataset/3148b177-eb60-4cf1-a0b8-0bcb136d6322)\n\n* **Derived From** [GEODATA TOPO 250K Series 3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)\n\n* **Derived From** [HUN GW Model v01](https://data.gov.au/data/dataset/90554dbf-4992-49ec-98b1-53c6067e97a2)\n\n* **Derived From** [HUN GW Model simulate ua999 pawsey v01](https://data.gov.au/data/dataset/7b0a70e9-4ce9-4af9-a658-03451f0f5a9e)\n\n* **Derived From** [Bioregional Assessment areas v01](https://data.gov.au/data/dataset/0fd0d820-30b3-451f-a126-a50040426999)\n\n* **Derived From** [GEODATA TOPO 250K Series 3, File Geodatabase format (.gdb)](https://data.gov.au/data/dataset/96ebf889-f726-4967-9964-714fb57d679b)\n\n* **Derived From** [HUN GW Quantiles Interpolation for IMIA Database v01](https://data.gov.au/data/dataset/edb021a7-f6dc-43ad-958d-5a1829046310)\n\n* **Derived From** [BA ALL Assessment Units 1000m 'super set' 20160516_v01](https://data.gov.au/data/dataset/6c1aa99e-c973-4472-b434-756e60667bfa)\n\n* **Derived From** [NSW Catchment Management Authority Boundaries 20130917](https://data.gov.au/data/dataset/0dc4272e-c081-4ed4-9645-aa336ffacd85)\n\n* **Derived From** [BA ALL Assessment Units 1000m Reference 20160516_v01](https://data.gov.au/data/dataset/d044b1d9-40b0-4fc3-ae43-099cc7b96497)\n\n* **Derived From** [Geological Provinces - Full Extent](https://data.gov.au/data/dataset/0a064b3b-2a1e-4672-80d9-03333be67aad)\n\n* **Derived From** [HUN GW Model Mines raw data v01](https://data.gov.au/data/dataset/709cd6d1-8579-4aea-887d-b06d32a71961)\n\
HUN GW Quantiles Interpolation for IMIA Database v01
No full text## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement.\n\n\n\nThe dataset consists of a geodatabase containing the comma delimited text files of quntiles for each assessment unit under Baseline, ACRD and CRDP scenarios within the HUN subregion. The Groundwater (GW) quantiles are extracted from the groundwater modelling outputs. Dataset prepared for import into the Impact and Risk Analysis Database.\n\n## **Purpose** \n\nDataset prepared for import into the Impact and Risk Analysis Database.\n\n## **Dataset History** \n\nThe dataset consists of a geodatabase containing the comma delimited text files of quntiles for each assessment unit under Baseline, ACRD and CRDP scenarios within the HUN subregion. The Groundwater (GW) quantiles are extracted from the groundwater modelling outputs. Dataset prepared for import into the Impact and Risk Analysis Database.\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (XXXX) HUN GW Quantiles Interpolation for IMIA Database v01. Bioregional Assessment Derived Dataset. Viewed 13 March 2019, http://data.bioregionalassessments.gov.au/dataset/edb021a7-f6dc-43ad-958d-5a1829046310.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Bioregional Assessment areas v02](https://data.gov.au/data/dataset/e414b1b3-c42e-42e9-9cc4-2093054aa35f)\n\n* **Derived From** [Hunter subregion boundary](https://data.gov.au/data/dataset/2b704127-f134-45ca-afc7-2ce19c892c87)\n\n* **Derived From** [Natural Resource Management (NRM) Regions 2010](https://data.gov.au/data/dataset/1d54e38f-4051-4f0c-a350-c7dbd8eba65b)\n\n* **Derived From** [Bioregional Assessment areas v03](https://data.gov.au/data/dataset/96dbf469-5463-4f4d-8fad-4214c97e5aac)\n\n* **Derived From** [HUN GW Model code v01](https://data.gov.au/data/dataset/e54a1246-0076-4799-9ecf-6d673cf5b1da)\n\n* **Derived From** [HUN Groundwater tables 20170421](https://data.gov.au/data/dataset/87661c96-d774-4347-8357-858a4a1395a9)\n\n* **Derived From** [HUN Assessment Units 1000m 20160725 v02](https://data.gov.au/data/dataset/3148b177-eb60-4cf1-a0b8-0bcb136d6322)\n\n* **Derived From** [GEODATA TOPO 250K Series 3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)\n\n* **Derived From** [HUN GW Model v01](https://data.gov.au/data/dataset/90554dbf-4992-49ec-98b1-53c6067e97a2)\n\n* **Derived From** [HUN GW Model simulate ua999 pawsey v01](https://data.gov.au/data/dataset/7b0a70e9-4ce9-4af9-a658-03451f0f5a9e)\n\n* **Derived From** [Bioregional Assessment areas v01](https://data.gov.au/data/dataset/0fd0d820-30b3-451f-a126-a50040426999)\n\n* **Derived From** [GEODATA TOPO 250K Series 3, File Geodatabase format (.gdb)](https://data.gov.au/data/dataset/96ebf889-f726-4967-9964-714fb57d679b)\n\n* **Derived From** [BA ALL Assessment Units 1000m 'super set' 20160516_v01](https://data.gov.au/data/dataset/6c1aa99e-c973-4472-b434-756e60667bfa)\n\n* **Derived From** [HUN GW Model Mines raw data v01](https://data.gov.au/data/dataset/709cd6d1-8579-4aea-887d-b06d32a71961)\n\n* **Derived From** [NSW Catchment Management Authority Boundaries 20130917](https://data.gov.au/data/dataset/0dc4272e-c081-4ed4-9645-aa336ffacd85)\n\n* **Derived From** [BA ALL Assessment Units 1000m Reference 20160516_v01](https://data.gov.au/data/dataset/d044b1d9-40b0-4fc3-ae43-099cc7b96497)\n\n* **Derived From** [Geological Provinces - Full Extent](https://data.gov.au/data/dataset/0a064b3b-2a1e-4672-80d9-03333be67aad)\n\
CLM bioregion 3D geological model
No full text## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement.\n\n\n\nThis dataset includes the formation top grids (or in some instances formation base) of the alluvial, volcanic and sedimentary bedrock hydrostratigraphic grids. They are based on a three-dimensional geological model developed in GoCAD™ and SKUA™ (Paradigm Geophysical Pty Ltd, version 2009.4 and version 2014.1, respectively).\n\n## **Dataset History** \n\nThese layers are the binding surfaces (= formation tops or interfaces between different stratigraphic units) for the bioregion-wide three-dimensional geological model. These form the basis for the development of the volumetric three-dimensional geological model. The workflow for the model development is described in detail in Clarence-Moreton bioregional assessment product 2.1-2.2 (Raiber et al., 2016).\n\n\n\nThe sources for the binding surfaces are all geological data and digital elevation models (outlined in Raiber et al., 2016).\n\n\n\nThese include: \n\nShuttle Radar Topography Mission (SRTM) digital elevation model\n\nCoal seam gas, petroleum and stratigraphic wells\n\nGroundwater bores\n\nShapefiles of the extent of different stratigraphic units\n\nA table of revised formation tops provided by Metgasco Limited\n\nGrids of key formation tops (Richmond coal seams, Kangaroo Creek Sandstone, Gatton Sandstone and Koukandowie Formation) provided by Metgasco Limited\n\nGrids of formation tops provided by the NSW Department of Trade and Investment for stratigraphic units including the Walloon Coal Measures, Koukandowie Formation and other deeper layers.\n\n\n\nFrom these data sources, the 3D geological model was developed in GoCAD™ and SKUA™ (Paradigm Geophysical Pty Ltd, version 2009.4 and version 2014.1, respectively). An add-on on GoCAD, MIRA Mining utilities, was also extensively used. \n\n\n\nPrior to use, all data were subjected to considerable data quality check. Interfaces such as those between the alluvium and the underlying volcanic or sedimentary bedrock are based primarily on data from groundwater bores. The data cleaning process and the steps involved in creating these interfaces is described in detail in Clarence-Moreton bioregional assessment product 2.1-2.2 (Raiber et al., 2016).\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (XXXX) CLM bioregion 3D geological model. Bioregional Assessment Derived Dataset. Viewed 28 September 2017, http://data.bioregionalassessments.gov.au/dataset/ec308925-99ae-4bbf-9005-08097d8342e5.\n\n## **Dataset Ancestors** \n\n* **Derived From** [CLM - Bore water level QLD](https://data.gov.au/data/dataset/20c5f443-bd19-4d2b-9f96-6633244c64e5)\n\n* **Derived From** [QLD Coal Seam Gas well locations - 14/08/2014](https://data.gov.au/data/dataset/88028a0b-7c1e-4b70-8217-abc2c536e6c4)\n\n* **Derived From** [CLM - Orara-Kangaroo bedrock](https://data.gov.au/data/dataset/9daa153e-dbcf-4a7d-9fe6-790ebd7bca94)\n\n* **Derived From** [CLM - New South Wales Department of Trade and Investment 3D geological model layers](https://data.gov.au/data/dataset/0843bdb7-d8e8-40ac-ae9c-0ac59b37cdf7)\n\n* **Derived From** [Qld 100K mapsheets - Mount Lindsay](https://data.gov.au/data/dataset/3031172f-ec23-4c4d-835f-0772da8829ba)\n\n* **Derived From** [Qld 100K mapsheets - Helidon](https://data.gov.au/data/dataset/b3f4f1b5-a2fd-40fc-b35b-78b100a50dcb)\n\n* **Derived From** [Qld 100K mapsheets - Ipswich](https://data.gov.au/data/dataset/71d610f7-084a-44c6-afa3-f0763396239b)\n\n* **Derived From** [CLM - Woogaroo Subgroup extent](https://data.gov.au/data/dataset/7da67176-77fb-47fd-9bfa-1fae92261cf4)\n\n* **Derived From** [Coal Bore Holes - QLD](https://data.gov.au/data/dataset/e7802c0f-e11b-4f9a-a597-a5f316f40ec3)\n\n* **Derived From** [Qld 100K mapsheets - Toowoomba](https://data.gov.au/data/dataset/5b8bf9c4-d127-45c5-9fef-a71013331d86)\n\n* **Derived From** [CLM - Walloon Coal Measures spatial extent](https://data.gov.au/data/dataset/a6f029c1-b57a-496a-b6ad-2f017cc89702)\n\n* **Derived From** [CLM - Interpolated surfaces of Alluvium depth](https://data.gov.au/data/dataset/7867c5af-e2a0-43f7-ae09-30fb4d9a656a)\n\n* **Derived From** [CLM - New South Wales well completion reports](https://data.gov.au/data/dataset/85d50f57-37bb-4af5-ab67-4e8849d0cd98)\n\n* **Derived From** [Geofabric Surface Catchments - V2.1](https://data.gov.au/data/dataset/ea1b6f6c-e8a3-4c78-a463-044c89857fc0)\n\n* **Derived From** [CLM - Stratigraphic wells in the QLD area of the Clarence-Moreton bioregion](https://data.gov.au/data/dataset/76975f35-715f-42e3-97c2-44f5c8de88a6)\n\n* **Derived From** [CLM - Metgasco 3D geological model formation top grids](https://data.gov.au/data/dataset/41cc99e6-0309-4a74-a1ba-cb0f9a12ff4e)\n\n* **Derived From** [CLM - Queensland well completion reports](https://data.gov.au/data/dataset/e66a0708-2d10-4f21-bbe1-c986f5e0d4e7)\n\n* **Derived From** [CLM - Coal Bore Holes in QLD region of Clarence-Moreton bioregion](https://data.gov.au/data/dataset/3d2b63fc-b5ee-4ade-bdb9-694fa0fd41b1)\n\n* **Derived From** [CLM - DEM in ascii format](https://data.gov.au/data/dataset/4e33c849-20ef-48f0-a522-22ac80d9cc73)\n\n* **Derived From** [CLM - Main Range volcanics](https://data.gov.au/data/dataset/b6f08090-aed0-4a6a-9a61-cdd2333138ed)\n\n* **Derived From** [CLM - Geology NSW & Qld combined v02](https://data.gov.au/data/dataset/982bd271-5ce8-48cf-b3cf-c50550509baa)\n\n* **Derived From** [CLM - Orara-Bungawalbin bedrock](https://data.gov.au/data/dataset/c5f52b4d-5a3e-4772-97f9-171b875e32dc)\n\n* **Derived From** [Qld 100k mapsheets - Warwick](https://data.gov.au/data/dataset/3e2fa307-1f06-4873-96d3-5c3e5638894a)\n\n* **Derived From** [Qld 100k mapsheets - Kingaroy](https://data.gov.au/data/dataset/01f58f60-9688-4b62-9de9-7e58aa0eeeb6)\n\n* **Derived From** [CLM - Extent of Bremer river and Warrill creek alluvial systems](https://data.gov.au/data/dataset/21239a36-67ea-4535-92e4-6ad4e37e0108)\n\n* **Derived From** [CLM - Stratigraphic wells data from IRTM in the QLD area of the Clarence-Morton bioregion](https://data.gov.au/data/dataset/0de9e452-240b-439d-82b9-25dc85eb5b15)\n\n* **Derived From** [CLM - Basalt extent](https://data.gov.au/data/dataset/d01c0a51-9102-471c-b2bd-d5f413731bd9)\n\n* **Derived From** [CLM - Koukandowie FM bedrock](https://data.gov.au/data/dataset/87ee5e91-fbd6-4bcd-8344-c52df1f4f226)\n\n* **Derived From** [CLM - Extent of Richmond river alluvial system May 6th 2014](https://data.gov.au/data/dataset/75029853-ab90-42c8-a6de-85ecf1671dda)\n\n* **Derived From** [CLM - Coal seam gas and petroleum wells](https://data.gov.au/data/dataset/598c923e-7eba-47ab-a1de-637dbe0d08fd)\n\n* **Derived From** [GEODATA TOPO 250K Series 3, File Geodatabase format (.gdb)](https://data.gov.au/data/dataset/96ebf889-f726-4967-9964-714fb57d679b)\n\n* **Derived From** [CLM - Lamington volcanics](https://data.gov.au/data/dataset/00358558-b7fc-4165-a4e3-fd1ec26ed51a)\n\n* **Derived From** [GEODATA TOPO 250K Series 3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)\n\n* **Derived From** [NSW Catchment Management Authority Boundaries 20130917](https://data.gov.au/data/dataset/0dc4272e-c081-4ed4-9645-aa336ffacd85)\n\n* **Derived From** [Geological Provinces - Full Extent](https://data.gov.au/data/dataset/0a064b3b-2a1e-4672-80d9-03333be67aad)\n\n* **Derived From** [CLM - Gatton Sandstone extent](https://data.gov.au/data/dataset/ace6073d-9db3-4702-a4bf-78345505d9f5)\n\n* **Derived From** [CLM - Extent of Richmond river alluvial system February 3rd 2015](https://data.gov.au/data/dataset/e8a94d1e-d0c4-4c66-87ec-59bc83ea5d82)\n\n* **Derived From** [CLM - Interpolated piezometric surfaces for Alluvium](https://data.gov.au/data/dataset/da04bc6a-b2ad-427f-a434-643ad6006ea0)\n\n* **Derived From** [Qld 100K mapsheets - Allora](https://data.gov.au/data/dataset/46a276a3-fa56-4b1c-8aa4-0af90d28756b)\n\n* **Derived From** [Qld 100K mapsheets - Jandowae](https://data.gov.au/data/dataset/0e11158d-8dbb-453b-9bf0-f79fa3fa1d89)\n\n* **Derived From** [Bioregional Assessment areas v03](https://data.gov.au/data/dataset/96dbf469-5463-4f4d-8fad-4214c97e5aac)\n\n* **Derived From** [Qld 100K mapsheets - Esk](https://data.gov.au/data/dataset/9e7334b7-fbb0-4893-bd08-ac296ce9a4fb)\n\n* **Derived From** [CLM - Extent of Logan and Albert river alluvial systems](https://data.gov.au/data/dataset/c0047016-9e16-4803-ae21-a671582025f1)\n\n* **Derived From** [NSW Geological Survey - geological units DRAFT line work.](https://data.gov.au/data/dataset/8fd05241-5f8c-4a02-9c16-9da9bc6b33c8)\n\n* **Derived From** [CLM - Qld Surface Geology Mapsheets](https://data.gov.au/data/dataset/a040de87-21b1-4097-a273-41471405ab28)\n\n* **Derived From** [Clarence-Moreton SEEBASE & Structural GIS Project data.](https://data.gov.au/data/dataset/b1690f8b-4025-45d2-96a0-6feb03ff3e52)\n\n* **Derived From** [CLM - NSW Surface Geology Mapsheets in the Clarence-Moreton bioregion](https://data.gov.au/data/dataset/a1f5c7b3-ea1f-4ef0-9d05-f54e81f4c7b6)\n\n* **Derived From** [CLM - Richmond catchment boundary](https://data.gov.au/data/dataset/a69bfc76-60b0-4256-8156-4ed7bba39bad)\n\n* **Derived From** [CLM - Extent of Clarence River alluvial systems](https://data.gov.au/data/dataset/46ec2295-19f2-48b7-bdbb-9347e6301c02)\n\n* **Derived From** [CLM - Grafton-Piora bedrock](https://data.gov.au/data/dataset/59addbea-b8a5-4409-9c36-da260efe81f1)\n\n* **Derived From** [Hydstra Groundwater Measurement Update - NSW Office of Water, Nov2013](https://data.gov.au/data/dataset/08b34518-c947-4665-82e5-c144b5b24e01)\n\n* **Derived From** [Natural Resource Management (NRM) Regions 2010](https://data.gov.au/data/dataset/1d54e38f-4051-4f0c-a350-c7dbd8eba65b)\n\n* **Derived From** [Formation tops exploration wells](https://data.gov.au/data/dataset/414c8231-9471-4620-b2ea-f57e2114d1bb)\n\n* **Derived From** [Qld 100k mapsheets - Beenleigh](https://data.gov.au/data/dataset/f2eb7c75-52c5-4738-b7b7-76ec31b7f7ee)\n\n* **Derived From** [Qld 100K mapsheets - Caboolture](https://data.gov.au/data/dataset/cee55c9c-29f9-4733-aac9-9b82a2ff739f)\n\n* **Derived From** [CLM - Extent of Lockyer Creek alluvial system](https://data.gov.au/data/dataset/98160487-1dfe-41b5-9f8c-dc73795e2094)\n\n* **Derived From** [Qld 100k mapsheets - Murwillumbah](https://data.gov.au/data/dataset/c9852e4a-1084-4fdb-a538-17b89736205d)\n\n* **Derived From** [AHGFContractedCatchment - V2.1 - Bremer-Warrill](https://data.gov.au/data/dataset/23825b8f-0f58-417b-ad54-1074d4863b03)\n\n* **Derived From** [QLD Department of Natural Resources and Mines Groundwater Database Extract 20142808](https://data.gov.au/data/dataset/a5c5cbdb-1152-43f7-9533-a123027b7ce1)\n\n* **Derived From** [Bioregional Assessment areas v01](https://data.gov.au/data/dataset/0fd0d820-30b3-451f-a126-a50040426999)\n\n* **Derived From** [Bioregional Assessment areas v02](https://data.gov.au/data/dataset/e414b1b3-c42e-42e9-9cc4-2093054aa35f)\n\n* **Derived From** [Qld 100K mapsheets - Inglewood](https://data.gov.au/data/dataset/32869100-6b73-44a4-bcef-c58e380d0b7d)\n\n* **Derived From** [CLM - Grafton-Rapville bedrock](https://data.gov.au/data/dataset/1c217d86-ba4e-480b-8786-2ab083c2495f)\n\n* **Derived From** [Qld 100K mapsheets - Oakey](https://data.gov.au/data/dataset/9b5ef250-c085-4365-b9c0-bb34e0b56150)\n\n* **Derived From** [Geoscience Australia, 1 second SRTM Digital Elevation Model (DEM)](https://data.gov.au/data/dataset/9a9284b6-eb45-4a13-97d0-91bf25f1187b)\n\n* **Derived From** [CLM - Bore water level NSW](https://data.gov.au/data/dataset/d20a15c4-b4ea-45a4-97e3-6ed83373ba97)\n\
Groundwater Modelling Report for Duralie Coal Mine
No full text## **Abstract** \n\nThis dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the Bioregional Assessment Programme based on the known details at the time of acquisition.\n\n\n\nThis report deals with the groundwater modelling task undertaken by Heritage Computing on behalf of Yancoal, as a part of their Environmental Impact Assessment for the purposed extension of Duralie Coal Mine.\n\n\n\nhttp://www.gloucestercoal.com.au/documents/Enviro_EAD_DCM_2010_Appendix_B_Groundwater%20Assessment.pdf\n\n\n\nThis dataset has been provided to the BA Programme for use within the programme only. Third parties may request a copy of the data from Yancoal Australia Ltd. Original documentation can be sourced from the following website:\n\n\n\nhttp://www.duraliecoal.com.au\n\n## **Dataset History** \n\nThis report was downloaded from Yancoal Website on 27 August 2013.\n\n\n\nhttp://www.gloucestercoal.com.au/documents/Enviro_EAD_DCM_2010_Appendix_B_Groundwater%20Assessment.pdf\n\n## **Dataset Citation** \n\nYancoal Pty Ltd (2014) Groundwater Modelling Report for Duralie Coal Mine. Bioregional Assessment Source Dataset. Viewed 18 July 2018, http://data.bioregionalassessments.gov.au/dataset/ebd54059-a8a0-4c21-bc98-d5ca9f5139fd
Gippsland region clip of Victorian groundwater-surface water interaction
No full text## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. \n\n\n\nThis dataset is a GIS layer of Victorian groundwater-surface water interaction data clipped to the Gippsland region. \n\n\n\nGroundwater generally interacts with surface water through various processes and pathways. The development of ground water often has impacts on surface streams and visa versa. The data results from an assessment of the SW-GW interaction across the study area. The data describes GW and SW interaction in four broad classes : neutral/losing, gaining, variable and unclassified. The Australian Hydrological Geospatial Fabric Surface Hydrology Catchments dataset was used as the base layer for considering surface water as an asset. This dataset provided mapped major rivers for Victoria. Numerous investigations into the interaction between groundwater and surface water have occurred across Victoria. Where this information was available in a format suitable for use in a GIS, it was collated to inform a state wide dataset of groundwater and surface water interaction. The resulting product attributes the stream base layer (described above) with the following classification of groundwater and surface water interaction: Gaining//Variable//Neutral/Losing//Unclassified\n\n## **Dataset History** \n\nGIS data based on DSE, 2012. Victorian groundwater-surface water interaction spatial data. Compiled for the Secure Allocation, Future Entitlements (SAFE) Project by the Department of Sustainability and Environment, Victoria.\n\n\n\nThe method used to generate the dataset of groundwater and surface water interaction in Victoria can be summarised as: (1) Where a hydrogeochemistry study by Monash University was available to provide an indication of groundwater and surface water interaction it was adopted with high reliability; (2) Where a Murray-Darling Basin sustainable yields groundwater and surface water interaction study was available, it was adopted with medium reliability; (3) Where Melbourne Water Corporation (MWC) had indicated river reaches characterised by remnant pools of water in prolonged drought, this was considered to be indicative of gaining river conditions, with medium reliability; (4) Where a baseflow indices study was available, it was indicative of a gaining river reach and assigned medium reliability; (5) Where no other information existed and the river was classified as "unmodified", it was assumed to be gaining if it was perennial and neutral/losing if it was not perennial. These river reaches were assigned a low reliability; (6) Where no other information existed and the river was classified as "modified", an indication of groundwater-surface water interaction could not occur, given that the modification of flows could be responsible for the perenniality of the river reach, as opposed to being indicative of losing or gaining groundwater; (7) A reliability dataset was also generated that indicates the assumed reliability of the classification, which was directly correlated to the reliability of the input data.\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (XXXX) Gippsland region clip of Victorian groundwater-surface water interaction. Bioregional Assessment Derived Dataset. Viewed 05 October 2018, http://data.bioregionalassessments.gov.au/dataset/e889b765-9822-4d0a-aef6-99071b0ec7ad.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Groundwater and Surface Water Interaction Victoria](https://data.gov.au/data/dataset/07a9df56-5108-4ec7-8c28-3a684248d7db)\n\
Asset database for the Gippsland Basin bioregion on 12 February 2015
No full text## **Abstract** \n\n\n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement. \n\n\n\nThis database supersedes the previous version GIP AssetList Database v1.2 20150130, correcting Asset identifiers (AID) that were duplicated between databases. \n\nThis dataset contains the spatial and non-spatial (attribute) components of the Gippsland bioregion Asset List as two .mdb files, which are readable as an MS Access database or as an ESRI Personal Geodatabase.\n\n\n\nUnder the BA program, a spatial assets database is developed for each defined bioregional assessment project. The spatial elements that underpin the identification of water dependent assets are identified in the first instance by regional NRM organisations (via the WAIT tool) and supplemented with additional elements from national and state/territory government datasets. All reports received associated with the WAIT process for Gippsland are included in the zip file as part of this dataset. \n\n\n\nElements are initially included in the preliminary assets database if they are partly or wholly within the bioregion's preliminary assessment extent (Materiality Test 1, M1). Elements are then grouped into assets which are evaluated by project teams to determine whether they meet the second Materiality Test (M2). Assets meeting both Materiality Tests comprise the water dependent asset list. Descriptions of the assets identified in the Gippsland bioregion are found in the "AssetList" table of the database. In this version of the database only M1 has been assessed.\n\n\n\nAssets are the spatial features used by project teams to model scenarios under the BA program. Detailed attribution does not exist at the asset level. Asset attribution includes only the core set of BA-derived attributes reflecting the BA classification hierarchy, as described in Appendix A of "AssetList_database_GIP_v1p3_20150212.doc", located in the zip file as part of this dataset.\n\n\n\nThe "Element_to_Asset" table contains the relationships and identifies the elements that were grouped to create each asset.\n\n\n\nDetailed information describing the database structure and content can be found in the document "AssetList_database_GIP_v1p3_20150212.doc" located in the zip file.\n\n\n\nSome of the source data used in the compilation of this dataset is restricted.\n\n## **Purpose** \n\nThe Asset List Database was developed to identify water dependent assets located within the Gippsland bioregion.\n\n## **Dataset History** \n\nThe title of this dataset was changed from "GIP AssetList Database v1.3 20150212" on 20 April 2015.\n\nSource codes for input datasets that are not yet registered and are therefore unable to be linked to this database via BADMS are as follows:\n\n- ECON_SW_VIC_RegRiv\n\n- ECON_SW_VIC_UnRegRiv\n\n\n\nThis dataset is an update of the previous version of the Gippsland asset list database: "Gippsland Asset List V1 20141210"; ID: 112883f7-1440-4912-8fc3-1daf63e802cb, which was updated with the inclusion of a number of additional datasets from the Victorian Department of the Environment and Primary Industries as identified in the "linkages" section and below.\n\n\n\nVictorian Farm Dam Boundaries\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/311a47f9-206d-4601-aa7d-6739cfc06d61\n\n\n\nFlood Extent 100 year extent West Gippsland Catchment Management Authority GIP v140701\n\nhttps://data.bioregionalassessments.gov.au/dataset/2ff06a4f-fdd5-4a34-b29a-a49416e94f15\n\n\n\nIrrigation District Department of Environment and Primary Industries GIP\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/880d9042-abe7-4669-be3a-e0fbe096b66a\n\n\n\nLandscape priority areas (West)\n\nWest Gippsland Regional Catchment Strategy Landscape Priorities WGCMA GIP 201205\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/6c8c0a81-ba76-4a8a-b11a-1c943e744f00\n\n\n\nPlantation Forests Public Land Management(PLM25) DEPI GIP 201410\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/495d0e4e-e8cd-4051-9623-98c03a4ecded\n\n\n\nand additional data identifying "Vulnerable" species from the datasets:\n\nVictorian Biodiversity Atlas flora - 1 minute grid summary\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/d40ac83b-f260-4c0b-841d-b639534a7b63\n\n\n\nVictorian Biodiversity Atlas fauna - 1 minute grid summary\n\nhttps://data.bioregionalassessments.gov.au/datastore/dataset/516f9eb1-ea59-46f7-84b1-90a113d6633d\n\n\n\nA number of restricted datasets were used to compile this database. These are listed in the accompanying documentation and below:\n\n\n\n- The Collaborative Australian Protected Areas Database (CAPAD) 2010\n\n- Environmental Assets Database (Commonwealth Environmental Water Holder)\n\n- Key Environmental Assets of the Murray-Darling Basin\n\n- Communities of National Environmental Significance Database\n\n- Species of National Environmental Significance \n\n- Ramsar Wetlands of Australia 2011\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (2015) Asset database for the Gippsland Basin bioregion on 12 February 2015. Bioregional Assessment Derived Dataset. Viewed 07 February 2017, http://data.bioregionalassessments.gov.au/dataset/e0a8bc96-e97b-44d4-858e-abbb06ddd87f.\n\n## **Dataset Ancestors** \n\n* **Derived From** [GIP AssetList Database v1.2 20150130](https://data.gov.au/data/dataset/6f34129d-50a3-48f7-996c-7a6c9fa8a76a)\n\n* **Derived From** [Flood Extent 100 year extent West Gippsland Catchment Management Authority GIP v140701](https://data.gov.au/data/dataset/2ff06a4f-fdd5-4a34-b29a-a49416e94f15)\n\n* **Derived From** [Surface Water Economic Entitlements GIP 20141219](https://data.gov.au/data/dataset/e52eb72a-46c9-40d8-b4c3-986d0f02600b)\n\n* **Derived From** [West Gippsland Regional Catchment Strategy Landscape Priorities WGCMA GIP 20121205](https://data.gov.au/data/dataset/6c8c0a81-ba76-4a8a-b11a-1c943e744f00)\n\n* **Derived From** [Irrigation District Department of Environment and Primary Industries GIP](https://data.gov.au/data/dataset/880d9042-abe7-4669-be3a-e0fbe096b66a)\n\n* **Derived From** [Surface Water and Groundwater Entitlement Data with Volumes - DEPI Regs Cat6 Victoria 20141218](https://data.gov.au/data/dataset/09388963-1653-4961-9949-f5218c247df1)\n\n* **Derived From** [Communities of National Environmental Significance Database - RESTRICTED - Metadata only](https://data.gov.au/data/dataset/c01c4693-0a51-4dbc-bbbd-7a07952aa5f6)\n\n* **Derived From** [National Groundwater Dependent Ecosystems (GDE) Atlas](https://data.gov.au/data/dataset/e358e0c8-7b83-4179-b321-3b4b70df857d)\n\n* **Derived From** [Victorian Water Supply Protection Areas](https://data.gov.au/data/dataset/2138f7eb-468e-4522-b214-f1bd0b440ba8)\n\n* **Derived From** [National Groundwater Information System (NGIS) v1.1](https://data.gov.au/data/dataset/e157b1cd-3cb7-4cf9-a13c-a6bed576b8c7)\n\n* **Derived From** [Birds Australia - Important Bird Areas (IBA) 2009](https://data.gov.au/data/dataset/5d488350-83b6-4e71-8d17-687ad8ff9941)\n\n* **Derived From** [Southern Rural Water SW Locations with BOM Regulations Category 6 Volumes Gippsland 20150430](https://data.gov.au/data/dataset/59f17548-3dbe-41a8-92f2-3b39ebbb0584)\n\n* **Derived From** [Gippsland Project boundary](https://data.gov.au/data/dataset/27413de5-d13a-4231-ac79-fc77f4cbb5f7)\n\n* **Derived From** [Victorian Groundwater Management Areas](https://data.gov.au/data/dataset/df25175d-0dff-43e7-ada5-4c0ec0569e88)\n\n* **Derived From** [Plantation Forests Public Land Management(PLM25) DEPI GIP 201410](https://data.gov.au/data/dataset/495d0e4e-e8cd-4051-9623-98c03a4ecded)\n\n* **Derived From** [National Groundwater Dependent Ecosystems (GDE) Atlas (including WA)](https://data.gov.au/data/dataset/6dbaee0d-8813-46b1-9c13-1b796e7ed3bf)\n\n* **Derived From** [Species Profile and Threats Database (SPRAT) - Australia - Species of National Environmental Significance Database (BA subset - RESTRICTED - Metadata only)](https://data.gov.au/data/dataset/7276dd93-cc8c-4c01-8df0-cef743c72112)\n\n* **Derived From** [Surface Water Entitlement Locations Gippsland Southern Rural Water 20141218](https://data.gov.au/data/dataset/486343b3-87e0-4fc8-b2b1-2881d5d4664e)\n\n* **Derived From** [Ramsar Wetlands of Australia](https://data.gov.au/data/dataset/d65cc156-944d-4961-bfba-eacfd61db63a)\n\n* **Derived From** [National Groundwater Information System Victorian Extract (2014-03-21)](https://data.gov.au/data/dataset/fc6dbf39-d786-4412-b631-04695db4cc90)\n\n* **Derived From** [GEODATA TOPO 250K Series 3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)\n\n* **Derived From** [Groundwater Licences Entitlement Volume To Bores Vic DEPI 20141021](https://data.gov.au/data/dataset/a410fbcc-7c3d-486a-87c4-a5bb88fb489f)\n\n* **Derived From** [Groundwater Economic Elements Gippsland 20141120](https://data.gov.au/data/dataset/cba157d1-7be9-451a-9e41-570da5c3643d)\n\n* **Derived From** [Commonwealth Heritage List Spatial Database (CHL)](https://data.gov.au/data/dataset/57720684-4948-45db-a2c8-37259d531d87)\n\n* **Derived From** [Potential Groundwater Dependent Ecosystems for West Gippsland Catchment Management Authority](https://data.gov.au/data/dataset/e5499022-8e74-4412-8516-c66d163e6e75)\n\n* **Derived From** [Victorian Biodiversity Atlas flora - 1 minute grid summary](https://data.gov.au/data/dataset/d40ac83b-f260-4c0b-841d-b639534a7b63)\n\n* **Derived From** [Unreg surface water licences DELWP Gippsland 20150301](https://data.gov.au/data/dataset/0353426b-403d-4d4b-aac0-75afb55e1176)\n\n* **Derived From** [National Heritage List Spatial Database (NHL) (v2.1)](https://data.gov.au/data/dataset/26daa8d7-a90e-47f3-982b-0df362414e65)\n\n* **Derived From** [Gippsland Basin bioregion Asset List v01 - 20141210](https://data.gov.au/data/dataset/112883f7-1440-4912-8fc3-1daf63e802cb)\n\n* **Derived From** [Victorian Farm Dam Boundaries](https://data.gov.au/data/dataset/311a47f9-206d-4601-aa7d-6739cfc06d61)\n\n* **Derived From** [Gippsland Basin bioregion Preliminary Assessment Extent (PAE)](https://data.gov.au/data/dataset/d7f3985c-ce48-40f7-a625-b6689261f41b)\n\n* **Derived From** [Victoria Regional CMA - Water Asset Information Tool - WAIT databases](https://data.gov.au/data/dataset/c6e0e8c0-a46f-42e9-a822-67c93abe64e9)\n\n* **Derived From** [Australia - Species of National Environmental Significance Database](https://data.gov.au/data/dataset/4eff885b-0d68-45e8-b4b1-e3e5448354eb)\n\n* **Derived From** [Australia, Register of the National Estate (RNE) - Spatial Database (RNESDB) Internal](https://data.gov.au/data/dataset/878f6780-be97-469b-8517-54bd12a407d0)\n\n* **Derived From** [Victorian Biodiversity Atlas fauna - 1 minute grid summary](https://data.gov.au/data/dataset/516f9eb1-ea59-46f7-84b1-90a113d6633d)\n\n* **Derived From** [Potential Groundwater Dependent Ecosystems for East Gippsland Catchment Management Authority](https://data.gov.au/data/dataset/7ebd95fb-b866-4554-8894-0dcc9b5937c8)\n\n* **Derived From** [Ground Water Managment Area Victoria DEPI 201402](https://data.gov.au/data/dataset/2189fd16-ad33-4a22-abe9-a4c6b9908275)\n\n* **Derived From** [Victoria - Seamless Geology 2014](https://data.gov.au/data/dataset/2872d02e-66cb-42b6-9e5a-63abc8ad871b)\n\n* **Derived From** [Directory of Important Wetlands in Australia (DIWA) Spatial Database (Public)](https://data.gov.au/data/dataset/6636846e-e330-4110-afbb-7b89491fe567)\n\n* **Derived From** [Collaborative Australian Protected Areas Database (CAPAD) 2010 (Not current release)](https://data.gov.au/data/dataset/7b649c6d-fdbf-40e3-b002-db521665af53)\n\n* **Derived From** [Victorian Ecological Vegetation Communities 2005 (with Bioregional Conservation Status)](https://data.gov.au/data/dataset/31915e37-ce5f-446f-932c-f702cc2224d3)\n\
DVS Volume of Use and Response
No full textTransactional data of the Document Verification Service. This information provides the number of requests to verify different ID document types. The data includes the date, time and the success of each verification request.\r\nRequests can be made against: Passports, Driver Licences, Medicare Cards, Visas, Immigration Cards, Birth, Marriage, Change of Name and Citizenship Certificates
Director of Public Prosecutions - Number of Pending Defendants by Financial Year 1999-00 to 2015-16
No full textThe total number of pending defendants as at 30 June in each financial year 1999-00 to 2015-16. Pending defendants means that the matter has not been completed.Director of Public Prosecutions - Defendents - <br/>
Department of Health FOI Disclosure Log
No full textThis dataset does not contain any resources hosted on data.gov.au. It provides a link to the location of the Department of Health Freedom of Information (FOI) disclosure log to aide in information and data discovery. You can find the [FOI Disclosure log here](http://www.health.gov.au/internet/main/publishing.nsf/Content/foi-disc-log) and the Agency's [Information Publication Scheme here](http://www.health.gov.au/internet/main/publishing.nsf/Content/foi-inf-pub-scheme).\r\n\r\nThe data.gov.au team is not responsible for the contents of the above linked pages