INMdok (Leibniz Institute for New Materials)
Not a member yet
931 research outputs found
Sort by
How to speed up ion transport in nanopores
Get PDFElectrolyte-filled subnanometre pores exhibit exciting physics and play an increasingly important role in science and technology. In supercapacitors, for instance, ultranarrow pores provide excellent capacitive characteristics. However, ions experience difficulties in entering and leaving such pores, which slows down charging and discharging processes. In an earlier work we showed for a simple model that a slow voltage sweep charges ultranarrow pores quicker than an abrupt voltage step. A slowly applied voltage avoids ionic clogging and co-ion trapping—a problem known to occur when the applied potential is varied too quickly—causing sluggish dynamics. Herein, we verify this finding experimentally. Guided by theoretical considerations, we also develop a non-linear voltage sweep and demonstrate, with molecular dynamics simulations, that it can charge a nanopore even faster than the corresponding optimized linear sweep. For discharging we find, with simulations and in experiments, that if we reverse the applied potential and then sweep it to zero, the pores lose their charge much quicker than they do for a short-circuited discharge over their internal resistance. Our findings open up opportunities to greatly accelerate charging and discharging of subnanometre pores without compromising the capacitive characteristics, improving their importance for energy storage, capacitive deionization, and electrochemical heat harvesting
Photoinduced Strain-Assisted Synthesis of a Stiff-Stilbene Polymer by Ring-Opening Metathesis Polymerization
Get PDFAbstract Developing a novel strategy to synthesize photoresponsive polymers is of significance owing to their potential applications. We report a photoinduced strain-assisted synthesis of main-chain stiff-stilbene polymers by using ring-opening metathesis polymerization (ROMP), activating a macrocyclic π-bond connected to a stiff-stilbene photoswitch through a linker. Since the linker acts as an external constraint, the photoisomerization to the E-form leads to the stiff-stilbene being strained and thus reactive to ROMP. The photoisomerization of Z-form to E-form was investigated using time-dependent NMR studies and UV/Vis spectroscopy. The DFT calculation showed that the E-form was less stable due to a lack of planarity. By the internal strain developed due to the linker constraint through photoisomerization, the E-form underwent ROMP by a second generation Grubbs catalyst. In contrast, Z-form did not undergo polymerization under similar conditions. The MALDI-TOF spectrum of E-form after polymerization showed the presence of oligomers of >5.2 kDa
Photodegradable Tissue-Adhesive Hydrogels
Get PDFHydrogels for wound management and tissue gluing have to adhere to tissue for a given time scale and then disappear, either by removal from the skin or by slow degradation in applications inside the body. Advanced wound management materials also envision the encapsulation of therapeutic drugs or cells to support the natural healing process. The design of hydrogels that can fulfill all these properties with minimal chemical complexity, a stringent condition to favor transfer into a real medical device, is challenging. Herein, we present a hydrogel design with moderate structural complexity that fulfills a number of relevant properties for wound dressing: it can form in situ and encapsulate cells, it can adhere to tissue, and it can be degraded on demand by light exposure under cytocompatible conditions. The hydrogels are based on starPEG macromers terminated with catechol groups as crosslinking units and contain intercalated photocleavable triazole nitrobenzyl groups. Hydrogels are formed under mild conditions (HEPES buffer with 9-18 mM of sodium periodate as oxidant) and are compatible with encapsulated cells. Upon light-irradiation, the cleavage of the nitrobenzyl group mediates depolymerization, which enables on-demand release of cells or debonding from tissue. The molecular design and obtained properties are interesting for the development of advanced wound dressings and cell therapies, and expand the range of functionality of current alternatives
Dual-Zinc Electrode Electrochemical Desalination
Get PDFAbstract Continuous and low-energy desalination technologies are in high demand to enable sustainable water remediation. Our work introduces a continuous desalination process based on the redox reaction of a dual-zinc electrode. The system consists of two zinc foils as redox electrodes with flowing ZnCl2 electrolyte, concentrated and diluted salt streams with three anion- and cation-exchange membranes (AEM and CEM) separated configuration (AEM|CEM|AEM). If a constant current is applied, the negative zinc electrode is oxidized, and electrons are released to the external circuit, whereas the positive zinc electrode is reduced, causing salt removal in the dilution stream. The results showed that brackish water can be directly desalted to 380.6 ppm during a continuous batch-mode process. The energy consumption can be as low as 35.30 kJ mol−1 at a current density of 0.25 mA cm−2, which is comparable to reverse osmosis. In addition, the dual-zinc electrode electrochemical desalination demonstrates excellent rate performance, reversibility, and batch cyclability through electrode exchange regeneration. Our research provides a route for continuous low-energy desalination based on metal redox mediators
Deciphering the Influence of Electrolytes on the Energy Storage Mechanism of Vertically-Oriented Graphene Nanosheet Electrodes by Using Advanced Electrogravimetric Methods
Get PDFElectrolyte composition is a crucial factor determining the capacitive properties of a supercapacitor device. However, its complex influence on the energy storage mechanisms has not yet been fully elucidated. For this purpose, in this study, the role of three different types of electrolytes based on a propylene carbonate (PC) solution containing tetrabutylammonium perchlorate (TBAClO4), lithium perchlorate (LiClO4) and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide (N1114TFSI) ionic liquid on vertically-oriented graphene nanosheet electrodes has been investigated. Herein, in situ electrochemical quartz crystal microbalance (EQCM) and its coupling with electrochemical impedance spectroscopy (EIS), known as ac-electrogravimetry, have allowed the dynamic aspects of the (co)electroadsorption processes at the electrode-electrolyte interface to be examined. A major contribution of ClO4− anions (TBAClO4) was evidenced, whereas in the PC/N1114TFSI mixture (50:50 wt%) both anions (TFSI−) and cations (N1114+) were symmetrically exchanged during cycling. In the particular case of LiClO4, solvation of Li+ cations in PC was involved, affecting the kinetics of electroadsorption. These results demonstrate the suitability of dynamic electrogravimetric methods to unveil the interfacial exchange properties of mobile species for the conception of new high performance energy storage devices
Streptococcal Extracellular Membrane Vesicles Are Rapidly Internalized by Immune Cells and Alter Their Cytokine Release
Get PDFExtracellular vesicles are membranous structures shed by almost every living cell. Bacterial gram-negative outer membrane vesicles (OMVs) and gram-positive membrane vesicles (MVs) play important roles in adaptation to the surrounding environment, cellular components' exchange, transfer of antigens and virulence factors, and infection propagation. Streptococcus pneumoniae is considered one of the priority pathogens, with a global health impact due to the increase in infection burden and growing antibiotic resistance. We isolated MVs produced from the S. pneumoniae reference strain (R6) and purified them via size exclusion chromatography (SEC) to remove soluble protein impurities. We characterized the isolated MVs by nanoparticle tracking analysis (NTA) and measured their particle size distribution and concentration. Isolated MVs showed a mean particle size range of 130–160 nm and a particle yield of around 1012 particles per milliliter. Cryogenic transmission electron microscopy (cryo-TEM) images revealed a very heterogeneous nature of isolated MVs with a broad size range and various morphologies, arrangements, and contents. We incubated streptococcal MVs with several mammalian somatic cells, namely, human lung epithelial A549 and human keratinocytes HaCaT cell lines, and immune cells including differentiated macrophage-like dTHP-1 and murine dendritic DC2.4 cell lines. All cell lines displayed excellent viability profile and negligible cytotoxicity after 24-h incubation with MVs at concentrations reaching 106 MVs per cell (somatic cells) and 105 MVs per cell (immune cells). We evaluated the uptake of fluorescently labeled MVs into these four cell lines, using flow cytometry and confocal microscopy. Dendritic cells demonstrated prompt uptake after 30-min incubation, whereas other cell lines showed increasing uptake after 2-h incubation and almost complete colocalization/internalization of MVs after only 4-h incubation. We assessed the influence of streptococcal MVs on antigen-presenting cells, e.g., dendritic cells, using enzyme-linked immunosorbent assay (ELISA) and observed enhanced release of tumor necrosis factor (TNF)-α, a slight increase of interleukin (IL)-10 secretion, and no detectable effect on IL-12. Our study provides a better understanding of gram-positive streptococcal MVs and shows their potential to elicit a protective immune response. Therefore, they could offer an innovative avenue for safe and effective cell-free vaccination against pneumococcal infections
Kinetic Control over Self-Assembly of Semiconductor Nanoplatelets
Get PDFSemiconductor nanoplatelets exhibit spectrally pure, directional fluorescence. To make polarized light emission accessible and the charge transport effective, nanoplatelets have to be collectively oriented in the solid state. We discovered that the collective nanoplatelets orientation in monolayers can be controlled kinetically by exploiting the solvent evaporation rate in self-assembly at liquid interfaces. Our method avoids insulating additives such as surfactants, making it ideally suited for optoelectronics. The monolayer films with controlled nanoplatelets orientation (edge-up or face-down) exhibit long-range ordering of transition dipole moments and macroscopically polarized light emission. Furthermore, we unveil that the substantial in-plane electronic coupling between nanoplatelets enables charge transport through a single nanoplatelets monolayer, with an efficiency that strongly depends on the orientation of the nanoplatelets. The ability to kinetically control the assembly of nanoplatelets into ordered monolayers with tunable optical and electronic properties paves the way for new applications in optoelectronic devices
Self-Hydrophobization in a Dynamic Hydrogel for Creating Nonspecific Repeatable Underwater Adhesion
Get PDFAbstract Adhesive hydrogels are widely applied for biological and medical purposes; however, they are generally unable to adhere to tissues under wet/underwater conditions. Herein, described is a class of novel dynamic hydrogels that shows repeatable and long-term stable underwater adhesion to various substrates including wet biological tissues. The hydrogels have Fe3+-induced hydrophobic surfaces, which are dynamic and can undergo a self-hydrophobization process to achieve strong underwater adhesion to a diverse range of dried/wet substrates without the need for additional processes or reagents. It is also demonstrated that the hydrogels can directly adhere to biological tissues in the presence of under sweat, blood, or body fluid exposure, and that the adhesion is compatible with in vivo dynamic movements. This study provides a novel strategy for fabricating underwater adhesive hydrogels for many applications, such as soft robots, wearable devices, tissue adhesives, and wound dressings
High-performance ion removal via zinc–air desalination
Get PDFElectrochemical processes enable a new generation of energy-efficient desalination technologies. While ion electrosorption via capacitive deionization is only suitable for brackish water with low molar strength, the use of Faradaic materials capable of reversible ion intercalation or conversion reactions allows energy-efficient removal of ions from seawater. However, the limited charge transfer/storage capacity of Faradaic materials indicates an upper limit for their desalination applications. Therefore, a new electrochemical concept must be explored to exceed the current state-of-the-art results and to push the desalination capacity beyond 100–200 mgNaCl/gelectrode. In this proof-of-concept work, we introduce the new concept of using metal–air battery technology for desalination. We do so by presenting performance data for zinc–air desalination (ZAD) in 600 mM NaCl. The ZAD cell provides a desalination capacity of 0.9–1.0 mgNaCl/cm2 (normalized to the membrane area; corresponding to 1300 mgNaCl/gZn) with a charge efficiency of 70% when charging/discharging the cell at 1 mA/cm2. The energy consumption of ZAD is 68–92 kJ/mol
Switchable Cavitation in Silicone Coatings for Energy-Saving Cooling and Heating
Get PDFAbstract Space cooling and heating currently result in huge amounts of energy consumption and various environmental problems. Herein, a switching strategy is described for efficient energy-saving cooling and heating based on the dynamic cavitation of silicone coatings that can be reversibly and continuously tuned from a highly porous state to a transparent solid. In the porous state, the coatings can achieve efficient solar reflection (93%) and long-wave infrared emission (94%) to induce a subambient temperature drop of about 5 °C in hot weather (≈35 °C). In the transparent solid state, the coatings allow active sunlight permeation (95%) to induce solar heating to raise the ambient temperature from 10 to 28 °C in cold weather. The coatings are made from commercially available, cheap materials via a facile, environmentally friendly method, and are durable, reversible, and patternable. They can be applied immediately to various existed objects including rigid substrates