INMdok (Leibniz Institute for New Materials)
Not a member yet
931 research outputs found
Sort by
Vitronectin-based hydrogels recapitulate neuroblastoma growth conditions
Get PDFThe tumor microenvironment plays an important role in cancer development and the use of 3D in vitro systems that decouple different elements of this microenvironment is critical for the study of cancer progression. In neuroblastoma (NB), vitronectin (VN), an extracellular matrix protein, has been linked to poor prognosis and appears as a promising therapeutic target. Here, we developed hydrogels that incorporate VN into 3D polyethylene glycol (PEG) hydrogel networks to recapitulate the native NB microenvironment. The stiffness of the VN/PEG hydrogels was modulated to be comparable to the in vivo values reported for NB tissue samples. We used SK-N-BE (2) NB cells to demonstrate that PEGylated VN promotes cell adhesion as the native protein does. Furthermore, the PEGylation of VN allows its crosslinking into the hydrogel network, providing VN retention within the hydrogels that support viable cells in 3D. Confocal imaging and ELISA assays indicate that cells secrete VN also in the hydrogels and continue to reorganize their 3D environment. Overall, the 3D VN-based PEG hydrogels recapitulate the complexity of the native tumor extracellular matrix, showing that VN-cell interaction plays a key role in NB aggressiveness, and that VN could potentially be targeted in preclinical drug studies performed on the presented hydrogels
Tuning the Release Force of Microfibrillar Adhesives by Geometric Design
Get PDFAbstract Switchable micropatterned adhesives exhibit high potential as novel resource-efficient grippers in future pick-and-place systems. In contrast with the adhesion acting during the “pick” phase, the release during the “place” phase has received little research attention so far. For objects smaller than typically 1 mm, release may become difficult as gravitational and inertial forces are no longer sufficient to allow shedding of the object. A compressive overload can initiate release by elastic buckling of the fibrils, but the switching ratio (ratio between high and low adhesion force) is typically only 2–3. In this work, new microfibrillar designs are reported exhibiting directional buckling with high switching ratios in the order of 20. Their functionality is illustrated by in situ optical observation of the contact signatures. Such micropatterns can enable the successful release of small objects with high placement accuracy
Discussion on Existing Standards and Quality Criteria in Nanosafety Research
Get PDFThe partners of the research project NanoS-QM (Quality- and Description Standards for Nanosafety Research Data) identified and invited relevant experts from research institutions, federal agencies, and industry to evaluate the traceability of the results generated with the existing standards and quality criteria. During the discussion it emerged that numerous studies seem to be of insufficient quality for regulatory purposes or exhibit weaknesses with regard to data completeness. Deficiencies in study design could be avoided by more comprehensive use of appropriate standards, many of which already exist. The use of Electronic Laboratory Notebooks (ELNs) that allow for early collection of metadata and enrichment of datasets could be one solution to enable data re-use and simplify quality control. Generally, earlier provision and curation of data and metadata indicating their quality and completeness (e.g. guidelines, standards, standard operating procedures (SOPs) that were used) would improve their findability, accessibility, interoperability, and reusability (FAIR) in the nanosafety research field
The rhythms of nature inspiring art and science
No full textThe conquest of fire has been an essential component of the civilizing process. Milazzo and Buehler from MIT spearhead a novel direction of research by seeking inspiration from fire through deep learning, paving a new avenue for the design and fabrication of novel materials
Targeting extracellular lectins of Pseudomonas aeruginosa with glycomimetic liposomes
Get PDFThe antimicrobial resistance crisis requires novel approaches for the therapy of infections especially with Gram-negative pathogens. Pseudomonas aeruginosa is defined as priority 1 pathogen by the WHO and thus of particular interest. Its drug resistance is primarily associated with biofilm formation and essential constituents of its extracellular biofilm matrix are the two lectins, LecA and LecB. Here, we report microbial lectin-specific targeted nanovehicles based on liposomes. LecA- and LecB-targeted phospholipids were synthesized and used for the preparation of liposomes. These liposomes with varying surface ligand density were then analyzed for their competitive and direct lectin binding activity. We have further developed a microfluidic device that allowed the optical detection of the targeting process to the bacterial lectins. Our data showed that the targeted liposomes are specifically binding to their respective lectin and remain firmly attached to surfaces containing these lectins. This synthetic and biophysical study provides the basis for future application in targeted antibiotic delivery to overcome antimicrobial resistance
Increasing Antibacterial Efficiency of Cu Surfaces by targeted Surface Functionalization via Ultrashort Pulsed Direct Laser Interference Patterning
Get PDFCopper (Cu) exhibits great potential for application in the design of antimicrobial contact surfaces aiming to reduce pathogenic contamination in public areas as well as clinically critical environments. However, current application perspectives rely purely on the toxic effect of emitted Cu ions, without considering influences on the interaction of pathogenic microorganisms with the surface to enhance antimicrobial efficiency. In this study, it is investigated on how antibacterial properties of Cu surfaces against Escherichia coli can be increased by tailored functionalization of the substrate surface by means of ultrashort pulsed direct laser interference patterning (USP-DLIP). Surface patterns in the scale range of single bacteria cells are fabricated to purposefully increase bacteria/surface contact area, while parallel modification of the surface chemistry allows to involve the aspect of surface wettability into bacterial attachment and the resulting antibacterial effectivity. The results exhibit a delicate interplay between bacterial adhesion and the expression of antibacterial properties, where a reduction of bacterial cell viability of up to 15-fold can be achieved for E. coli on USP-DLIP surfaces in comparison to smooth Cu surfaces. Thereby, it can be shown how the antimicrobial properties of copper surfaces can be additionally enhanced by targeted surface functionalization
Titanium niobium oxide Ti2Nb10O29/carbon hybrid electrodes derived by mechanochemically synthesized carbide for high-performance lithium-ion batteries
Get PDFThis work introduces the facile and scalable two-step synthesis of Ti 2 Nb 10 O 29 (TNO)/carbon hybrid material as a promising anode for lithium-ion batteries (LIBs). The first step uses a mechanically-induced self-sustaining reaction via ball-milling at room temperature to produce titanium niobium carbide with a stoichiometric ratio of Ti and Nb of 1 to 5. The second step involves the oxidation of as-synthesized titanium niobium carbide to produce TNO. Synthetic air yields fully oxidized TNO, while annealing in CO 2 results in TNO/carbon hybrids. The electrochemical performance for the hybrid and non-hybrid electrodes was surveyed for a narrow potential window (1.0-2.5 V vs. Li/Li + ) and a large potential window (0.05-2.5 V vs. Li/Li + ). The best hybrid material displayed a specific capacity of 350 mAh/g at a rate of 0.01 A/g (144 mAh/g at 1 A/g) in the large potential window regime. The electrochemical performance of hybrid materials is superior compared to non-hybrid materials for operation within the large potential window. Due to the advantage of carbon in hybrid material, the rate handling is faster than that of the non-hybrid one. The hybrid materials display robust cycling stability and maintain ca. 70% of their initial capacities after 500 cycles. In contrast, only ca. 26% of the initial capacity is maintained after the first 40 cycles for non-hybrid materials. We also applied our hybrid material as an anode in a full-cell lithium-ion battery by coupling it with commercial LiMn 2 O 4
Dye-Loaded Mechanochromic and pH-Responsive Elastomeric Opal Films
Get PDFIn this work, the preparation and fabrication of elastomeric opal films revealing reversible mechanochromic and pH-responsive features are reported. The core–interlayer–shell (CIS) particles are synthesized via stepwise emulsion polymerization leading to hard core (polystyrene), crosslinked interlayer (poly(methyl methacrylate-co-allyl methacrylate), and soft poly(ethyl acrylate-co-butyl acrylate-co-(2-hydroxyethyl) methacrylate) shell particles featuring a size of 294.9 ± 14.8 nm. This particle architecture enables the application of the melt-shear organization technique leading to elastomeric opal films with orange, respectively, green brilliant reflection colors dependent on the angle of view. Moreover, the hydroxyl moieties as part of the particle shell are advantageously used for subsequent thermally induced crosslinking reactions enabling the preparation of reversibly tunable mechanochromic structural colors based on Bragg's law of diffraction. Additionally, the CIS particles can be loaded upon extrusion or chemically by a postfunctionalization strategy with organic dyes implying pH-responsive features. This convenient protocol for preparing multi-responsive, reversibly stretch-tunable opal films is expected to enable a new material family for anti-counterfeiting applications based on external triggers
Effect of pore geometry on ultra-densified hydrogen in microporous carbons
Get PDFOur investigations into molecular hydrogen (H2) confined in microporous carbons with different pore geometries at 77 K have provided detailed information on effects of pore shape on densification of confined H2 at pressures up to 15 MPa. We selected three materials: a disordered, phenolic resin-based activated carbon, a graphitic carbon with slit-shaped pores (titanium carbide-derived carbon), and single-walled carbon nanotubes, all with comparable pore sizes of <1 nm. We show via a combination of in situ inelastic neutron scattering studies, high-pressure H2 adsorption measurements, and molecular modelling that both slit-shaped and cylindrical pores with a diameter of ∼0.7 nm lead to significant H2 densification compared to bulk hydrogen under the same conditions, with only subtle differences in hydrogen packing (and hence density) due to geometric constraints. While pore geometry may play some part in influencing the diffusion kinetics and packing arrangement of hydrogen molecules in pores, pore size remains the critical factor determining hydrogen storage capacities. This confirmation of the effects of pore geometry and pore size on the confinement of molecules is essential in understanding and guiding the development and scale-up of porous adsorbents that are tailored for maximising H2 storage capacities, in particular for sustainable energy applications
Safe-by-Design part II: A strategy for balancing safety and functionality in the different stages of the innovation process
Get PDFManufactured nanomaterials have the potential to impact an exceedingly wide number of industries and markets ranging from energy storage, electronic and optical devices, light-weight construction to innovative medical approaches for diagnostics and therapy. In order to foster the development of safer nanomaterial-containing products, two main aspects are of major interest: their functional performance as well as their safety towards human health and the environment. In this paper a first proposal for a strategy is presented to link the functionality of nanomaterials with safety aspects. This strategy first combines information on the functionality and safety early during the innovation process and onwards, and then identifies Safe-by-Design (SbD) actions that allow for optimisation of both aspects throughout the innovation process. The strategy encompasses suggestions for the type of information needed to balance functionality and safety to support decision making in the innovation process. The applicability of the strategy is illustrated using a literature-based case study on carbon nanotube-based transparent conductive films. This is a first attempt to identify information that can be used for balancing functionality and safety in a structured way during innovation processes