INMdok (Leibniz Institute for New Materials)
Not a member yet
931 research outputs found
Sort by
Catalyst Supraparticles: Tuning the Structure of Spray-dried Pt/SiO2 Supraparticles via Salt-based Colloidal Manipulation to Control their Catalytic Performance
Full text linkThe structure of supraparticles (SP) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. Especially, mixed NP dispersions of differently-sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying
Solvent Vapor Annealing and Plasma Treatment Stabilize Silver Nanowire Layers
Full text linkSilver nanowires (AgNW) find use in transparent conductive electrodes with applications in solar cells, touch screens, and wearables. Unprotected AgNW are prone to atmospheric corrosion and lose conductivity over time. Known passivation techniques either require submersion of pre-deposited AgNW in liquid compounds or the modification of AgNW inks prior to deposition, which alters viscosity and complicates deposition. Here, new possibilities for stabilization of pre-deposited AgNW networks without need for submersion are explored. It is demonstrated that AgNW networks can be stabilized either by argon or hydrogen plasma treatment or by solvent vapor annealing with ethanol, methanol, or ethyl acetate. These treatments yielded stable electrical resistance over at least nine weeks, whereas untreated or thermally annealed AgNW layers quickly lost conductivity. The potential of solvent vapor annealing is further explored by demonstrating a new processing technique for stable polymer matrix composites containing AgNW. Co-deposited layers of AgNW with polystyrene microbeads are annealed in ethyl acetate vapor to stabilize the AgNW while at the same time merging polymer beads into a closed film around the AgNW. The resulting composites maintained stable resistance and transmittance for at least seven weeks
Direct Ink Writing of Carbon-Based Electrofluids for Soft Electrical Component Manufacturing
Full text linkSoft electrical components are highly demanded in human-machine interaction devices. ”Electrofluids” (EFs) as suspensions of electrically conductive filler particles in non-conductive solvents have been proposed as promising sensors and conductive materials since they can flow and retain electrical conductivity. As they remain liquid in working conditions, encapsulation and manufacturing of complex patterns remain as a challenge but would enable a wider variety of applications. We propose direct ink writing (DIW) as method to manufacture carbon-based EFs. We performed simple shear flow and Fourier-transform (FT) rheology to evaluate the printability of EFs containing different concentrations of Carbon Black and Graphene Powder by DIW. Electrofluids exhibited three important characteristics to be manufactured via DIW: yield stress behaviour (confirmed by flow curves), high brittleness, and a fast mechanical recovery within a range of 15 seconds. We created printability maps to distinguish printable and non-printable EFs. We used printable EFs to manufacture complex patterns. As a proof of the great potential of the EFs and DIW combination, we compared simple and multiline strain gauges enhancing the sensitivity of EF as strain sensor by 400%
Consequence of anisotropy on flocking: the discretized Vicsek model
Full text linkWe numerically study a discretized Vicsek model (DVM) with particles orienting in q possible orientations in two dimensions. The study investigates the significance of anisotropic orientation and microscopic interaction on macroscopic behavior. The DVM is an off-lattice flocking model like the active clock model (ACM; Chatterjee et al 2022 Europhys. Lett.138 41001) but the dynamical rules of particle alignment and movement are inspired by the prototypical Vicsek model (VM). The DVM shows qualitatively similar properties as the ACM for intermediate noise strength where a transition from macrophase to microphase separation of the coexistence region is observed as q is increased. But for small q and noise strength, the liquid phase appearing in the ACM at low temperatures is replaced in the DVM by a configuration of multiple clusters with different polarizations, which does not exhibit any long-range order. We find that the dynamical rules have a profound influence on the overarching features of the flocking phase. We further identify the metastability of the ordered liquid phase subjected to a perturbation
Synthetic Immunology—Building Immunity from the Bottom-Up with Synthetic Cells
Full text linkSynthetic cells can advance immunotherapy, offering innovative approaches to understanding and enhancing immune responses. This review article delves into the advancements and potential of synthetic cell technologies in immunology, emphasizing their role in understanding and manipulating immune functions. Recent progress in understanding vertebrate immune systems and the challenges posed by diseases highlight the need for innovative research methods, complementing the analysis of multidimensional datasets and genetic engineering. Synthetic immune cell engineering aims to simplify the complexity of immunological systems by reconstructing them in a controlled setting. This approach, alongside high-throughput strategies, facilitates systematic investigations into immunity and the development of novel treatments. The article reviews synthetic cell technologies, focusing on their alignment with the three laws of immunity: universality, tolerance, and appropriateness. It explores the integration of synthetic cell modules to mimic processes such as controlled T-cell activation, bacteria engulfment and elimination, or cellular maturation into desirable phenotypes. Together, such advancements expand the toolbox for understanding and manipulating immune functions. Synthetic cell technologies stand at the innovation crossroads in immunology, promising to illuminate fundamental immune system principles and open new avenues for research and therapy
Structural Studies of Piperidino-Alanes with Halide, Amide and Hydride as further Ligands at Aluminum
Full text linkNine different derivatives of piperidino alanes of the general formula (CH2)5N-AlXY [X=Y=Cl (1), Br (2), I (3); X=(CH2)5N, Y=Cl (4), Br (5), I (6); X=H, Y=Cl (7), Br (8), I (9)] have been synthesized and compared with respect to their structures. All molecules form dimers with an Al2N2 central cycle and aluminum and nitrogen atoms in distorted tetrahedral environments as determined from X-ray diffraction. The three dihalide derivatives 1, 2 and 3 have C2h (2/m) symmetries in solution of which they maintain the Centro symmetry in the crystal lattice. The bis(piperidino) derivatives 4, 5 and 6 have either C1 (1) symmetry with the bridging piperidino cycles oriented in the same direction (4, 5) or Ci (ī) point symmetry as found for 6 (in solution at least one other isomer is present). Whereas the chlorine derivative 7 has crystallographic Ci (ī) symmetry, the bromine 8 has almost C2 and the iodine 9 crystallographic C2 (2) point symmetry. In solution all derivatives 7, 8, 9 show equilibria between cis (C2) and trans (Ci) isomeric forms (27Al NMR). The longest Al−N bond lengths within the rings are found for 5 (1.969(4) Å) and the shortest for 8 (1.940(4) Å). The ratio of Al⋅⋅⋅Al to N⋅⋅⋅N non-bonding distances in the almost square rings vary with the bulkiness of the terminal ligands at aluminum
Nahezu unendlich lange Polymere mit Ge=Ge-Doppelbindungen
Full text linkTrotz erheblichen Interesses an heteroatomhaltigen konjugierten Polymeren sind Beispiele mit schwereren Elementen des p-Blocks im Konjugationspfad rar. Die kürzlich beschriebene Metathese schwererer acyclischer Diene (HADMET) ermöglichte die Synthese eines Ge=Ge-Doppelbindungen enthaltenden Polymers, wenn auch eines unlöslichen mit begrenztem Polymerisationsgrad. Durch Einführung langer Alkylketten erhielten wir nun lösliche Vertreter mit – nach diffusionsabhängiger NMR-Spektroskopie (DOSY) und dynamischer Lichtstreuung (DLS) – nahezu unendlichen Polymerisationsgraden. UV/Vis und NMR-Daten bestätigen das Vorliegen von σ,π-Konjugation entlang der Silylen-Phenylen-Verknüpfungen zwischen den Ge=Ge-Einheiten. Günstige intermolekulare Dispersionswechselwirkungen führen zu leiterartigen, zylindrischen Aggregaten, wie durch Röntgendiffraktometrie (XRD), Kleinwinkel-Röntgenstreuung (SAXS) und DLS bestätigt. AFM- und TEM-Bilder abgeschiedener dünner Schichten offenbaren eine lamellare Anordnung ausgedehnter Polymerbündel
Influence of formaldehyde on signaling pathways when used in mammalian cell culture
No full textFormaldehyde is the smallest existing aldehyde, a highly reactive color less gas at room temperature and ubiquitously present in our atmosphere. Because of its reactivity leading to the crosslinking of macromolecules like proteins, it is widely used in industrial applications, but also in cell biology in order to preserve cells and tissues for further analysis. In this work, we show that formaldehyde releasing solutions commonly used for fixation of cells, can diffuse via the gas phase to the neighboring well and influence signaling processes in the therein cultured cells. To analyze this effect, we utilized a stable reporter cell line for YAP signaling or a gene expression-based reporter for activation of the NF-κB pathway. Especially the stable reporter cell line can also be used as sensor for bioavailable formaldehyde. The observed impact of formaldehyde on cellular signaling underscores the need for careful planning of experimental protocols and emphasizes the importance of implementing proper controls when utilizing this reagent in cellular signaling analyses
Understanding Rate and Capacity Limitations in Li-S Batteries based on Solid-state Sulfur Conversion in Confinement
Full text linkLi-S batteries with an improved cycle life of over one thousand cycles have been achieved using cathodes of sulfur-infiltrated nanoporous carbon with carbonate-based electrolytes. In these cells, a protective cathode-electrolyte-interphase (CEI) is formed, leading to solid-state conversion of S to Li2S in the nanopores. This prevents the dissolution of polysulfides and slows capacity fade. However, there is currently little understanding of what limits the capacity and rate performance of these Li-S batteries. Here, we aim to deepen the understanding of the capacity and rate limitation using a variety of structure-sensitive and electrochemical techniques, such as operando small angle neutron scattering (SANS), operando X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge. Operando SANS and XRD give direct evidence of CEI formation and solid-state sulfur conversion occurring inside the nanopores. Electrochemical measurements using two nanoporous carbons with different pore sizes suggest that charge transfer at the active material interfaces and the specific CEI/active materials structure in the nanopores play the dominant role in defining capacity and rate performance. This work helps defining strategies to increase the sulfur loading while maximizing sulfur usage, rate performance, and cycle life
Bacterial Engineered Living Materials modulate Mechanosignaling in Mammalian Cells
No full textEngineered living materials (ELMs) are gaining momentum for biomedical applications as self-replenishing drug depots, smart wound dressings, or as wearable sensors. Current studies on ELM-host interaction are mainly limited to the exchange of biochemical cues between ELMs and surrounding cells and tissues. Here we show that the genetically programmed mechanical properties of ELMs modulate mechanosignaling pathways in mammalian cells cultivated onto the living materials. To this aim, we genetically modulated curli fiber production inE. coliand analyzed the impact on the mechanical properties of the resulting ELMs. The living materials were used as matrix for the cultivation of mammalian cells engineered with a fluorescent reporter to indicate the activation of the mechano-responsive Hippo signaling pathway. We demonstrate that different genetically programmed ELM compositions translated into differential regulation of mechanosignaling in mammalian cells. These findings provide the perspective of using ELMs as extracellular matrix with genetically programmable mechanics for mammalian cells while also highlighting the need to consider the mechanical properties of therapeutic ELMs when assessing interaction with surrounding tissues.Abstract FigureToC figur