BAM-Publica - Publikationsserver der Bundesanstalt für Materialforschung und -prüfung
Not a member yet
58839 research outputs found
Sort by
Experimental determination of 7-day uptake rates for diffusive sampling of 86 volatile and semi-volatile organic compounds relevant for indoor air monitoring and investigation on their sensitivity to exposure time and indoor climate
No full textThis study aimed to experimentally determine uptake rates for 86 indoor relevant volatile and semi-volatile organic compounds (VOC, SVOC) for the passive sampler type Perkin Elmer/Markes™ with Tenax® TA as sorbent, which was used in the German Environmental Survey on Health (GerES VI) carried out by the German Environmental Agency (UBA) in the years 2023-2024. For this purpose, single reference gas atmospheres of 76 pure VOCs (liquid at room temperature) and a group of 10 SVOCs and VOCs (solid at room temperature) were generated using two generation procedures. By exposing the samplers to individual components, it was ruled out that interactions in a mixture have a influence on the uptake rate. Another aspect was to precisely describe the methodology and the resulting uncertainties, as there are gaps in the literature in this regard. The selection of the compounds was based on the findings of the preceding GerES V study for which data was missing or needed to be verified. In each experiment, a number of six passive samplers was exposed to the test gas atmospheres in dynamically operated exposure chambers for seven days. The sensitivity of the uptake rates of a group of 10 selected VOCs to variations in exposure time, ambient temperature, and air humidity in a multi-component reference gas atmosphere was investigated. Here, a decrease in the uptake rate with the exposure time could be observed stabilising from the fifth day of exposure onwards. A significant effect of temperature and humidity on the uptake rate was not apparent. The determined uptake rates exhibit uncertainties of < 20 % for 71 substances, and < 10 % for 51 substances which are also in good agreement with the literature, if already published elsewhere. The quantity of investigated substances, the detailed description of the methodology used to determine the uptake rates complemented by the respective uncertainties, as well as the compilation of comparative data, contribute to a better assessment of the quality and relevance of such data, which had not been published before
A Preliminary Study on the Scaling of RC Structures under Blasting Loading
No full textCurrent capabilities for full-scale field blast testing are highly resource intensive. Reliable small-scale experiments are an effective alternative. Characterization of the dynamic response and damage of RC elements to scaled blast loads was investigated in scaled-down field experiments. Spatially resolved information on the dynamic structural response to blast loading was obtained using distributed fiber optic acoustic sensing (DAS), acceleration sensors as well as piezoelectric pressure sensors
ODYSSEUS
No full textVorstellung des Forschungsprojekts ODYSSEUS und Darstellung der Aufgaben der BAM. Hierbei sollen neue Instrumente chemische Ausgangsstoffe zur Herstellung von Explosivstoffen und Bomben aufspüren, um zukünftig Anschläge zu verhindern
Dolomite and Mg Calcite as Mineral Thermometers in Mortar Binders. A High Resolution Raman Spectroscopic Study
No full textThis paper suggests the use of high‐resolution Raman scattering bands of MgCa carbonates as posteriori thermometer minerals in archaeometric studies. Therefore, the thermal behavior of two dolomite samples and the hydration and carbonation reaction in air of the decomposition products were investigated by Raman microspectroscopy. The increase in the calcination temperature resulted in the formation of – Raman silent MgO and – inert Mg calcite at 700°C–750°C. In contrast, the decarbonation, hydration, and recarbonation of sample material exposed to 750°C–900°C in a muffle furnace led to the appearance of Mg‐free calcite. High spectral resolution Raman spectroscopy enabled a spectral distinction between these two groups due to differences in the band parameters (peak position, bandwidth) of the vibrational (v1, v4, L) modes of calcite. In combination with Raman microspectroscopic mapping, this spectral information represents a new approach for the estimation of burning temperatures of medieval high‐fired gypsum mortars via natural dolomite impurities. Thus, the results of this work highlight the importance and potential of Raman microspectroscopy as a thermometric tool for elucidating the thermal history of anthropogenic fired materials, with potential applications for archaeometry and art technology, as well as for quality controls in the frame of the production of mineral mortar binders and ceramics or bricks, respectively
Inelastic and Quasielastic Neutron Scattering on Polynorbornenes with Bulky Carbocyclic Side groups
No full textThis study investigates the molecular mobility and vibrational properties of polynorbornenes with bulky carbocyclic side groups using inelastic and quasielastic neutron scattering techniques. The polymers, synthesized via metathesis and addition polymerization, exhibit varying degrees of microporosity, which ignificantly influences their gas separation performance. By inelastic neutron scattering experiments, it could be shown that all considered polymers have excess contributions to the low frequency vibrational density of states known as the Boson peak. The maximum frequency of the Boson peak correlates to the microporosity of the polymers.
This correlation supports the sound wave interpretation of the Boson peak, suggesting that the microporous structure enhances the compressibility of the material at a microscopic length scale. The molecular mobility, particularly the methyl group rotation, was characterized using elastic scans and quasielastic neutron scattering. The study revealed a temperature dependent relaxation process, with the onset of molecular fluctuations observed around 200 K for the polymer containing methyl groups. For the polymer having no methyl groups only elastic scattering is observed. The methyl group rotation was analyzed in terms of a jump diffusion in a threefold potential with three equivalent energy minima. This leads to an almost correct description of the q dependence of the elastic incoherent scattering function when the number of hydrogen nuclei undergoing the methyl group rotation is considered. It was further evidenced that the fraction of methyl undergoing the methyl group rotation increases with increasing temperature
Reinforcement Learning for Segmented Manufacturing
No full textThe manufacturing of large components is, in comparison to small components, cost intensive. This is due to the sheer size of the components and the limited scalability in number of produced items. To take advantage of the effects of small component production we segment the large components into smaller parts and schedule the production of these parts on regular-sized machine tools. We propose to apply and adapt recent developments in reinforcement learning in combination with heuristics to efficiently solve the resulting segmentation and assignment problem. In particular, we solve the assignment problem up to a factor of 8 faster and only a few percentages less accurate than a classic solver from operations research
Crowding Effects during DNA Translocation in Nanopipettes
No full textQuartz nanopipettes are an important emerging class of electric single-molecule sensors for DNA, proteins, their complexes, as well as other biomolecular targets. However, in comparison to other resistive pulse sensors, nanopipettes constitute a highly asymmetric environment and the transport of ions and biopolymers can become strongly directiondependent. For double-stranded DNA, this can include the characteristic translocation time and tertiary structure, but as we show here, nanoconfinement can also unlock capabilities for biophysical and bioanalytical studies at the single-molecule level. To this end, we show how the accumulation of DNA inside the nanochannel leads to crowding effects, and in some cases reversible blocking of DNA entry, and provide a detailed analysis based on a range of different DNA samples and experimental conditions. Moreover, using biotin-functionalized DNA and streptavidinmodified gold nanoparticles as target, we demonstrate in a proof-of-concept study how the crowding effect, and the resulting increased residence time in nanochannel, can be exploited by first injecting the DNA into the nanochannel, followed by incubation with the nanoparticle target and analysis of the complex by reverse translocation. We thereby integrate elements of sample processing and detection into the nanopipette, as an important conceptual advance, and make a case for the wider applicability of this device concept
Infrared thermography as an inspection tool for wind turbine rotor blades
No full textWith the rapid expansion of wind turbine construction, rotor blades have increasingly been identified as a primary cause of turbine downtime and failure. This has led to a growing demand for inspection technologies through which energy production losses can be minimised—particularly in comparison to conventional methods such as rope-access inspections—and through which sub-surface blade conditions can be assessed to detect damage or failure in advance. Infrared thermography has been considered as a promising non-contact, full-field inspection method that can be applied to rotor blades in both operational and idle states. In this presentation, delivered at BladesEurope 2025, the physical mechanisms that give rise to thermal contrast during thermographic inspection were explained, as this contrast enables the detection and visualisation of structural features. Results obtained from a collaborative project between BAM and Statkraft Norway were presented, followed by the validation of a finite element simulation through experiments conducted in a climate chamber.
Sustainable Pathways for the Synthesis of Calcium Sulfate Hemihydrate
No full textCalcium sulfate, and especially its hemihydrate form (bassanite), is crucial in the construction industry, primarily used as a hydraulic binder in cements, mortars, and wallboards. Because of the rapid transformation of bassanite into thermodynamically stable gypsum (calcium sulfate dihydrate) upon contact with water, natural deposits are scarce, rendering it one of the most extensively produced inorganic materials worldwide. Currently, bassanite is derived from mined or waste gypsum through a thermal dehydration process, which is energy-intensive and costly. As sustainability has become a key target for industrial processes and products, a series of studies aiming to increase the energy efficiency and reduce the carbon footprint of bassanite production was published recently. Two primary approaches are pursued: conversion of gypsum and direct precipitation of bassanite from solution. In both cases, organic solvents, (specific) additives and/or elevated temperatures have been used to control the activity/availability of water in the reaction medium and thus direct phase selection towards bassanite. This review offers a comprehensive overview of alternative bassanite production methods, critically examining their benefits, potential downsides, and overall impact on
the sustainability of industrial-scale use
63. DAfStb-Forschungskolloquium in der BAM - Themenblock 4: Digitalisierung im Bauwesen
No full textDie Digitalisierung hat sich in vielen Bereichen des Bauwesens durchgesetzt. So sind Planung und Entwurf selbst kleinerer Bauvorhaben heute vollständig digitalisiert. Auch das Monitoring von Bestandsbauwerken ist ohne digitale Datenerfassung, -verarbeitung und -speicherung nicht denkbar. Trotzdem sind Fragen hinsichtlich der strukturierten Speicherung und künftigen Nutzung von Daten noch offen. Einige Aspekte der Digitalisierung wurden im Rahmen des 63. DAfStb-Forschungskolloquiums (Tagungsband: DOI 10.26272/opus4-61338) in Vorträgen und Veröffentlichungen aufgegriffen und werden im Folgenden zusammengefasst