BAM-Publica - Publikationsserver der Bundesanstalt für Materialforschung und -prüfung
Not a member yet
58839 research outputs found
Sort by
WTB-IRT: Modelling and Measurement of Thermal Contrast in wind turbine rotor blades (WTBs)
No full textTo understand the results that can be obtained with thermography of operational wind turbine blades, a climate chamber based experiment was performed. The results of these experiments were additionally modelled using COMSOL Multiphysics. The results have been presented at the conference
Synthesis, Characterization, and Evaluation of Energetic Properties of 1,2‐bis(5‐(Trifluoromethyl)‐4<i>H</i>‐1,2,4‐triazol‐3‐yl)Diazene
No full textA new azo‐bridged compound with triazole moieties featuring trifluoromethyl groups was synthesized, exhibiting encouraging properties in the field of energetic materials. The new compound was synthesized in two steps from common starting materials using cyclocondensation, followed by oxidation reaction. The compound was characterized using nuclear magnetic resonance spectroscopy, mass spectrometry, infrared spectroscopy, and single‐crystal X‐ray diffraction. Impact and friction sensitivities were measured using BAM standard methods, and electrostatic discharge (ESD) sensitivity was measured using an ESD device from OZM Research. Heat of formation was calculated computationally using the CBS‐4m method, density was determined by the pycnometric method, and energetic properties were calculated using Explo5 software
PlasticTrace WP1 – Stakeholder Workshop
No full textThe talk summarizes the achievments of WP1 of the PlasticTrace project. Microplastic reference materials were developed by producing tablets. Different preparation methods were compared. Characterisation of the tablets was done after filtration with µFTIR, QCL, µRaman, Py-GC/MS and TED-GC/MS after ISO standards ISO 16094-2 and ISO/FDIS 16094-3. Polymer types are polypropylene and polyethylene terephthalate
Revolutionizing Concrete Analysis and Maintenance with Laser-Induced Breakdown Spectroscopy
No full textLaser-induced breakdown spectroscopy (LIBS) is a valuable complement to established methods for the chemical analysis of concrete. Compared to conventional techniques, LIBS enables spatially resolved imaging of harmful ion distributions within the cementitious matrix. It allows the simultaneous detection of all relevant ions and degradation mechanisms, facilitating a better understanding of interacting processes. The benefits of multi-element analysis are illustrated through selected examples that highlight the method’s superior information content. Ion penetration profiles are recorded at a resolution of 0.25 mm, providing high-quality input data for service life modelling. Instead of drill dust, a 50 mm core sample is used. The measurement is automated, requires no chemical reagents or elaborate sample preparation, and is completed within minutes
The role of Critical Raw Materials in Advanced Materials for the Energy Transition
No full textThe energy transition needs advanced materials, especially for batteries, solar cells, and fuel cells. Therefore, critical raw materials are necessary. In this presentation the use of critcal raw materials and strategies for the optimisation of their use are discussed
Toward sustainable and hydrogen compatible sealing materials
No full textMaterialien auf PTFE-Basis werden in der Regel als Kolbenringe in Hochdruck- und/oder kryogenem Wasserstoff verwendet. In diesem Projekt werden neu formulierte und nachhaltigere Polymerwerkstoffe mit herkömmlichen Materialien verglichen. Auf Grundlage der tribologischen Ergebnisse werden vielversprechende Kandidaten zusammen mit Reibungsmechanismen sowohl bei Hochdruck- als auch bei Niedrigtemperatur-Wasserstoff vorgeschlagen
On potentials and challenges of physics-informed SHM for civil engineering structures
No full textPhysics-informed structural health monitoring, which incorporates realistic physical models of material behavior, structural response, damage mechanisms, and aging processes, offers a promising framework to enhance monitoring capabilities and inform operation and maintenance planning. Nevertheless, the technical challenges and model requirements associated with this approach are highly context-dependent and can vary significantly across different applications. The presentation focusses on two case studies that highlight challenges and progress in Physics informed SHM
Probabilistic approach to concrete durability based on combined stochastic differential equations and Monte Carlo method
No full textCementitious materials are often exposed to aggressive environments, which have a significant impact on their durability. Proper prediction of concrete corrosion helps to apply the right measures and technologies, to extend the service life of structures. Carbonation and cyclic freezing are recognized among the most common corrosive factors for concrete. Their progress is linked to the penetration of CO2 and water into the concrete structure. Due to the random arrangement of aggregates and cement paste, concrete is an inhomogeneous material. Therefore, the progress of carbonation and frost-induced damage should be treated as random variables with appropriate probabilistic parameters. Experimental studies on concrete carbonation and freezing were conducted in accordance with the standards EN 12390–12 and EN 12390–9. As observed in the experiments, the progress of carbonation and frost damage of concrete could be described by zigzag, not necessarily monotonic functions. Stochastic differential equations (SDE) were employed to predict the behavior of concrete exposed to elevated CO2 concentrations and cyclic freezing. The stochastic model consisted of a drift term, which described the general trend of concrete durability exposed to carbonation and frost cycles, as well as a diffusion term, which accounted for the stochastic features of inhomogeneous concrete microstructure. The Euler–Maruyama approximation with Milstein improvement was applied to model the realization of the stochastic changes in concrete microstructure/durability. The proposed approach predicted experimental results with high accuracy. The application of the Monte Carlo (MC) method with 100,000 SDE realizations allowed to calculate the statistical parameters of the processes, such as concrete carbonation and freezing cycles. The probabilistic parameters, such as expected values and standard deviations, calculated using the SDE_MC approach, were in good agreement with experimental results for both problems, i.e. decelerating concrete carbonation and accelerating concrete scaling
Production of reference materials - not only for batteries
No full textThe presentation describes the basic procedure used by BAM to produce certified reference materials. In particular, BAM's reference material activities in the field of lithium batteries are discussed. Following the first NMC 111 reference material, which is already commercially available, further materials are in production, including black masses and lithium carbonate
Exploring Age-Induced Lithium Isotope Fractionation in Lithium-Ion Batteries using Microwave-Induced Cold Nitrogen Plasma Mass Spectrometry
No full textThis study explores Microwave-Inductively Coupled Atmospheric-pressure Plasma Mass Spectrometry (MICAP-MS) as a cost-effective alternative to Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) for analyzing lithium isotopic composition in lithium-ion batteries (LIBs). We investigate the performance of MICAP-MS in measuring Li isotope ratios in new and aged commercial lithium cobalt oxide (LCO) batteries. Our results show that MICAP-MS, operating under cold plasma conditions at 800 W with an 8 mm torch position, achieves results metrologically compatible with MC-ICP-MS, with a precision ranging from 0.6‰ to 3.4‰ for δ7Li values. MICAP-MS benefits from a dielectric resonator for uniform plasma, better ion velocity control, and higher energy efficiency. Optimal settings were identified with dwell times of 10 ms for 6Li and 1 ms for 7Li. The study of LIBs revealed that 6Li migrates towards the anode over multiple charge–discharge cycles, causing 7Li to accumulate in the cathode, a fractionation effect that becomes more pronounced with prolonged cycling. MICAP-MS provides a cost-effective, precise alternative to MC-ICP-MS, with lower operational costs and enhanced portability, advancing the study of isotopic fractionation and aging in lithium-ion batteries