Publikationsserver der Westfälischen Hochschule
Not a member yet
2819 research outputs found
Sort by
Der EuGH stärkt den europäischen Datenschutz und erklärt den Safe-Harbor-Pakt für ungültig
No full textOptimisation of the Electrodeposition Parameters for Platinum Nanoparticles on Carbon Nanofibers Support
No full textPlatinum nanoparticles electrodeposition on carbon nanofibers (CNF) support has been performed with the purpose to obtain electrodes that can be further used especially in a polymer electrolyte membrane fuel cell (PEMFC). A pretreatment of CNF is required in order to enhance the surface energy, which simultaneously improves handling and wettability as well as interaction with the platinum cations. This step was performed using oxygen plasma functionalization. To produce CNF supported Pt catalysts, an electrochemical method was applied and the deposition parameters were adjusted to obtain nanosized platinum particles with a good distribution onto the graphitic surface. The morphology and structure of the obtained particles were investigated by scanning electron microscopy combined with energy dispersive X-Ray spectroscopy. The amount of deposited platinum was established using thermogravimetrical measurements. Cyclic voltammetry performed in 0.5 M H2SO4 solution was applied for determining the electrochemical surface area (ECSA) of the obtained electrodes.The functionalization degree of the CNF outer surface has a strong influence on the structure, distribution and amount of platinum particles. Moreover, the current densities, which were set for the deposition process influenced not only the particles size but also the platinum amount. Applying an oxygen plasma treatment of 80 W for 1800 s, the necessary degree of surface functionalization is achieved in order to deposit the catalyst particles. The best electrodes were prepared using a current density of 50 mA cm-2 during the deposition process that leads to a homogenous platinum distribution with particles size under 80 nm and ECSA over 6 cm
A cost-effective PEM fuel cell test system based on hydraulic compression with optimized platinum catalyst loading
No full textFor this study gas diffusion electrodes (GDE) with low platinum loading are prepared for the application as anode in polymer electrolyte membrane fuel cell (PEMFC) systems based on hydraulic compression. As catalyst support material, carbon nanofibers (CNF) are investigated because of their high specific surface area and high graphitization degree. The electrode preparation is optimized by an economic and environmental friendly pre-treatment process in oxygen plasma. For GDE manufacture an ink containing oxygen plasma activated CNFs as well as hydrophilic polymer is used. After spray coating of this CNF ink on a graphitic substrate, platinum is deposited using the pulse plating technique. Preliminary results showed a considerable improvement of CNF dispersibility as well as an increased amount and an optimized morphology of the deposited platinum. Morphology and microstructure are observed by scanning electron microscopy as well as transmission electron microscopy. Platinum loading is determined by thermogravimetric analysis to be in the range of 0.01 mg cm-2 to 0.017 mg cm-2. Furthermore, MEAs are prepared from these GDEs and testing is performed in a novel modular fuel cell test stack based on hydraulic compression. Technical information about stack design and functions is given in this work
Betriebliches Vorschlagswesen. Mit dem betrieblichen Vorschlagswesen zum Ideen- und Innovationsmanagement. Verbreitungsgrad im Mittelstand. Eine branchenübergreifende Studie. Forschungsprojekt im Bezirk der Industrie- und Handelskammer zu Münster am "Institut für Mittelstandsorientierte Betriebswirtschaft an den Fachschulen Münster und Gelsenkirchen e.V."
No full textEntwicklung von vollmodularen PEM-Brennstoffzellen- und Elektrolyseursystemen mit segmentierten, planaren Polplatten
No full textIm Rahmen der Energiewende ist eine Erweiterung der in das Verbund-netz integrierten Energiespeicher notwendig, um zukünftig die heute gewohnte Versorgungssicherheit trotz eines sehr hohen Anteils volatiler regenerativer Energieerzeugungsanlagen zu ermöglichen. Eine geeignete elektrochemische Methode zur umweltfreundlichen Zwischenspeicherung großer Energiemengen stellt die Wasserelektrolyse mit bedarfsorientierter Rückverstromung dar. Dabei können die dynamischen Einspeise- und Laständerungen im elektrischen Verbundnetz im besonderen Maße von Elektrolyseur- und Brennstoffzellen-systemen auf Basis von Polymer-Elektrolyt-Membranen (PEM) aufgefangen werden.
Bestehende PEM-Systeme sind vor allem in ihrer konstruktiven Zellgröße und ihrer maximalen Leistung bei der Wasserstoffproduktion bzw. der Stromerzeugung stark begrenzt. Vor allem inhomogene Verpressungen großflächiger planarer Zellen in einem klassischen, mechanisch verspannten Stack führen zu hohen Leistungseinbußen. Zudem ergeben sich bei kleinen Stacks aufgrund der geringen Zellspannung ungünstige Wandlungsverhältnisse zwischen Strom und Spannung für eine vor- bzw. nachgeschaltete Leistungselektronik. Ein neuartiges Stackkonzept mit segmentierten Polplatten bietet eine konstruktive Lösung für das Problem größerer aktiver Zellflächen und leistet einen Beitrag zur Entwicklung industriell einsetzbarer Hochdruckelektrolyseure und Brennstoffzellen
PEM fuel cell electrodes based on graphene related materials for a hydrogen future
No full textDue to high power density and superior efficiency, polymer electrolyte membrane fuel cells (PEMFC) are believed to play a significant role for carbon dioxide emissions free electrical energy systems in the future. Unlike in Carnot processes, chemical energy in the form of hydrogen and oxygen is converted directly into electrical energy without a further process step. One issue in the development of PEMFCs for mobile or stationary applications is the utilization of rare and expensive catalyst material like platinum within the membrane electrode assembly (MEA) see figure 1. In addition, the objective is to reduce production costs and to increase the lifetime of PEMFC. One approach to improve PEMFCs is the development of intelligent electrode architectures. However, cost effective high performance materials are necessary to reach the development targets
Gesetz über die Feststellung des Haushaltsplans des Landes Nordrhein-Westfalen für das Haushaltsjahr 2012 (Haushaltsgesetz 2012). Öffentliche Anhörung zu GesEntw LRg Drs 15/3400 Ausschussprotokoll 15/393 19.01.2012 42.HFA S.1-4, 5-72
No full textAussprache mathematischer Ausdrücke - Reading Mathematical Expressions Aloud
Get PDFThis collection of mathematical expressions and how they are read aloud in German and English is intended to help engineers and engineering students.Diese Sammlung mathematischer Ausdrücke und ihrer Aussprache in Deutsch und Englisch richtet sich an Ingenieure und Ingenieursstudierende