Journal of Mechatronics and Artificial Intelligence in Engineering
Not a member yet
1200 research outputs found
Sort by
Bruxism and masticatory pattern: an understudied relationship
Get PDFBruxism as a pathophysiological entity, both day and night bruxism, has been the subject of innumerable investigations. Among the probable causes that have been raised are biochemical alterations in the central and/or peripheral nervous system, which can be seen reflected in an alteration of the rhythmic movements of the masticatory musculature of the stomatognathic system. On the other hand, chewing is recognized as one of the main functions of the stomatognathic system, responsible for maxillofacial growth and determining a rhythm in the movements of the masticatory musculature, depending in turn on a functional demand of the individual, in other words, the type of food consumed and the way to process it in the mouth. Objective: To determine the existence of a relationship between bruxism and the type of masticatory pattern installed in the patient. Methodology: Functional examinations and application of Fonseca questionnaires and bruxism self-report were performed in 27 adult patients, without distinction of sex, who have been diagnosed with possible and probable bruxism. Results: 100 % of the sample of subjects diagnosed with bruxism presented an altered masticatory pattern. Conclusions: The high correlation found in the sample between bruxism and masticatory pattern suggests that it is vital for the success of a bruxism treatment or a DTM to consider the way of processing food, by educating the patient with Masticatory Orientation. Based on the above, it proposes to conduct a study to evaluate the efficiency of a functional treatment for future Bruxism therapies
The relative merits of sediment transport formulas applied to the Nakdong Estuary, Korea using a coupled numerical modeling system
Get PDFThree sediment transport formulas by Lund-CIRP (2012), van Rijn (1998), and Soulsby (1997) were applied for this study with field data by Yoon (2008) and several sedimentary variables of Nakdong Estuary in a coupled numerical modeling system, CMS. CMS is adopted to compare the measured depth change data and the calculated depth change data. As a result, the Lund-CIRP formula with mean grain size (0.25 mm) and multi-bottom friction coefficients based on the mean grain size distribution had higher accuracy (1.6 %) than the other formulas. The Soulsby formula has higher accuracy for multi-grain size and 0.06 of bottom friction coefficients. The van Rijn formula has high accuracy at shallow water areas such as a river. In this study, it is judged that the accuracy of the van Rijn cases was low because the water depth of the Nakdong Estuary and the nearby sea area rapidly deepens
Simulation test of transformer short-circuit impedance based on equivalent model at different frequencies
Get PDFA distribution transformer is one of the most important equipments in the power grid, and its operational status is directly related to the security and stability of the entire power system. The performance of transformer windings determines the service life of the transformer. It is of great significance to evaluate the performance of transformer windings accurately, reliably, and effectively after the short-circuit test of the transformer. Aiming at the problem that the natural vibration frequency of the transformer measured before and after the short circuit may not be the same under the impact of the short circuit of the transformer, this paper puts forward the evaluation method for the performance evaluation of the winding of the transformer after the short circuit test and adopts the method of combining the analytic hierarchy process with the fuzzy evaluation method to quantitatively obtain the score for the performance evaluation of the winding. And that evaluation language is given according to the score. Finally, the evaluation of the transformer winding performance after the short-circuit test is realized. The evaluation results show that this method can effectively get the performance index of the transformer winding, without the need for hanging cover inspection, and solve the subjectivity of human eye observation to objectively, accurately, and quantitatively describe the performance state of the transformer winding. The method is favorable for power grid monitoring and maintenance personnel to accurately evaluate the operation stability of the transformer and has very positive significance for improving the short-circuit impact resistance of the transformer and ensuring the safety and stability of the operation of a power system
Socio-political development of CC(U)S in the Baltic Sea region
Get PDFAccording to EU goals and the Paris Agreement, an urgent need exists to reduce CO2 emissions while still securing energy supply. Thus, the timely deployment of carbon capture and storage (CCS) is seemingly unavoidable, especially for the cement and steel industries. However, diverse perceptions of CCS among stakeholders such as experts, politicians, and laypeople exist that could hinder the deployment of the technology, not least in the Baltic Sea Region (BSR). Hence, this research discusses these diverse perceptions and their roots. Furthermore, when it comes to political developments of CCS, after the unprovoked Russian invasion of Ukraine, the whole process of the energy transition in the region is under shadow for the seemingly mid-term while the approach to the energy security and security of supply needs to be revisited. In other words, the countries of the BSR need to manage the energy crisis in the region while following their plans for decarbonisation. In this light, CCS is, therefore, an option to secure energy supply from undesired alternatives like fossil fuels for the short-term and also biomass while curbing CO2 emissions. In sum, this research also discusses the role of CCS in energy security and security of supply concerning the Russian invasion of Ukraine
Experimental study on dynamic bending rigidity of aluminium cable steel reinforced
Get PDFThe dynamic bending rigidity of aluminium cable steel reinforced (ACSR) is a key parameter for analyzing the breeze vibration, galloping and de-icing vibration response of overhead transmission lines. In this paper, the calculation formula of the dynamic bending rigidity under axial force is derived based on the theory of Bernoulli-Euler beam. The dynamic response of one typical ACSR with different spans and different axial forces are studied by white-noise excitation and hammer excitation. The variation rules of dynamic bending rigidity of ACSR are presented. The comparison between the experimental results of the static and dynamic bending rigidity shows that the dynamic bending rigidity of the ACSR is much larger than the static bending rigidity
Study of torque pulsation control of switched reluctance motor by auto-disturbance rejection control
Get PDFThe switched reluctance motor drives the rotor based on the principle of minimum reluctance, which is structurally simpler, but the doubly salient structure of the stator and rotor leads to severe torque pulsation. This paper briefly introduces the switched reluctance motor and the auto-disturbance rejection controller for suppressing the torque pulsation of the switched reluctance motor. Then, the auto-disturbance rejection controller was simulated in the MATLAB software, and it was compared with the direct torque control strategy. The results showed that the switched reluctance motor installed with the self-reluctance controller reached the set rotational speed faster, with a smoother torque change; when the set speed changed abruptly, it was adjusted to the new rotational speed faster, with a smooth and stable torque change; when the load torque changed abruptly, it was adjusted to the new torque smoother and faster, and the adjustment to the rotational speed was also faster
Using vibration data to classify conditions in disk stack separators
Get PDFMounting sensors in disk stack separators is often a major challenge due to the operating conditions. However, a process cannot be optimally monitored without sensors. Virtual sensors can be a solution to calculate the sought parameters from measurable values. We measured the vibrations of disk stack separators and applied machine learning (ML) to detect whether the separator contains only water or whether particles are also present. We combined seven ML classification algorithms with three feature engineering strategies and evaluated our model successfully on vibration data of an experimental disk stack separator. Our experimental results demonstrate that random forest in combination with manual feature engineering using domain specific knowledge about suitable features outperforms all other models with an accuracy of 91.27 %
Successful balance of occlusal plane using functional orthopedics appliance
Get PDFIn this article, the treatment of two clinical cases is presented, in which the two patients showed distocclusion, severe overbite, required correction of the occlusal plane and movements of the mandible. Both were treated with functional orthopedic appliances In the first case. the patient was 4 years and 5 months old, and in second, 10 years 10 months old. Both had a significant pathological occlusal plane with a large difference in the height between the right and left sides. The lateral movements of the mandible showed completely different Functional Masticatory Angle Planes. The protrusion and opening movements of the mandible also showed deviation. The Functional Orthopedic appliance would advance the position of the mandible forward and would produce better responses if it were able to touch the incisors in the specific area. The forward mandibular position would activate the Ihh (Indian Hedgehog) and produce replication of the mesenchymal cells in the condyle and glenoid fossa. Moreover, it could produce an increase of mandibular length, and regulate the factors of mandibular condylar growth. The space produced between the occlusion as a result of the change to the forward mandible position must stimulate tooth eruption to correct the curve of the occlusal plane. Both cases showed balance of the occlusal plane and same functional masticatory angle Planes. Furthermore, the protrusion and opening movement of the mandible were corrected and no longer showed deviations. Note in both cases that the stability of the mandibular advancement occurred due to maintenance of twice as long to achieve incisor contact
Influence of floating support on the dynamic characteristics of compound planetary gear set
Get PDFDue to a large number of components, complex meshing relations and high requirements for assembly accuracy, the dynamic characteristic of compound planetary gear, such as vibration, impact, periodic motion and load sharing, are more easily affected by internal excitation than those of simple planetary gear set and parallel shafting gear set. To improve the load sharing behavior and the resistance of Chaos motions in the compound planetary gear set, in this work, by introducing the floating support into the center gear and planet gear, a lumped-parameter dynamic model of the compound planetary gear set is built based on the lumped parameter method and Lagrange kinematics equation. The steady response is calculated by numeric method to investigate the influence of floating support from different components on loading sharing behavior and periodic motion. The results indicate that, the increase of the floating value of all components improves the instantaneous load-sharing behavior, and single floating of planet gear reduces the load sharing behavior. To avoid the system being in quasi-periodic motion and Chaos motions under the condition of floating support, the input speed should be avoided away from the range of 3201 r/min-5069 r/min
The study for the influence of acoustic silencer foam on the output of sound based on the software of room EQ wizard
Get PDFStimulated by market demand and technological progress, the audio industry is booming. Many high-fidelity earphones are no longer satisfactory with simply providing customers with products but tend to provide customers with more opportunities to adjust their own tuning, one of which is to add the earphones with different acoustic silencer foam. This study begins by introducing the different types of earphones and their development history. After that, the specific research content is raised by questioning the prevailing perception of acoustic silencer foam in earphones. By comparing and analyzing the differences reflected by the frequency response curves of headphones equipped with different types of acoustic silencer foam, it is concluded that the smaller the cells of acoustic silencer foam and the presence of membrane will increase its ability to reduce the loudness at high frequency. This study reveals two significant characteristics which affect the performance of acoustic silencer foam and provides a reliable theoretical basis for the tuning technology of foam