GEUS Bulletin (Geological Survey of Denmark and Greenland)
Not a member yet
521 research outputs found
Sort by
Magnetic logs from the Lopra-1/1A and Vestmanna-1 wells, Faroe Islands
No full textSusceptibility measurements from cores (representing basalt, lapilli-tuffs and tuffs) and magnetic logs from the Lopra-1/1A well are presented. The basalts fall into high- and low-susceptibility groups with no overlap. The high-susceptibility basalts (seven cores) have susceptibilities between 4 and 88 ×10–3 SI and consist of basalt with < 1% vesicles from thick massive units. The low-susceptibility basalts are intergranular, intersertal or hypocrystalline and contain no or very little (< 1%) visible magnetite, are generally more altered than the high-susceptibility basalts and have susceptibilities in the range from 0.6 to 1.4 × 10–3 SI (seven cores). The susceptibility of ten volcaniclastites of lapilli-tuff or tuff varies from 0.4 to 3.8 × 10–3 SI. The cores from the Lopra-1/1A well reveal a bimodal distribution of magnetic susceptibility. Low susceptibilities ranging from 0.4 to 4 are characteristic of altered basalts poor in magnetite, lapilli-tuffs and tuffs. Thus single measurements of susceptibility are of little use in discriminating between these three types of rock. Susceptibility logs from the Lopra-1/1A well show that the variation below 3315 m distinguishes clearly between volcaniclastics (hyaloclastites) with low and fairly constant susceptibility and basalt beds of between 5 and 10 m thickness (with high susceptibility). The volcaniclastics comprise some 60–70% of the sequence between 3315 and 3515 m with the maximum continuous sediment layer being 80 m thick. A 1½ m core of solid basalt at 2381 m and sidewall cores of basalt from the Lopra1/1A well have a mean susceptibility of 22.1 ± 3.5 × 10–3 SI (standard deviation (σ) = 23.6, number of samples (N) = 46), while samples of hyaloclastite (lapilli-tuff and tuff) have a mean susceptibility of 0.85 × 10–3 SI (σ = 0.39, N = 17). The mean values of the rock magnetic parameters for 303 basalt plugs from the Vestmanna-1 well are: Qave = 13.3 ± 0.6 (σ = 11), Save = 11.8 ± 0.6 × 10–3 SI (σ = 11) and Jave = 4.64 ± 0.25 A/m (σ = 4.4). The reversely polarised, lowermost (hidden) part of the c. 4½ km thick lower basalt formation correlates with Chron C26r. The upper (exposed) part of the lower basalt formation correlates with Chrons C26n, C25r and C25n and the more than 2.3 km thick middle and upper basalt formations correlate with Chron C24n.3r
Archetypal kimberlite from the Maniitsoq region, southern West Greenland and analogy to South Africa
No full textUltramafic dyke rocks with kimberlitic megacrysts and mantle nodules have been known for decades from the northern part of the Archaean block and adjacent Proterozoic terranes in southern West Greenland (Fig. 1; Escher & Watterson 1973; Goff 1973; Scott 1981; Larsen & Rex 1992; Mitchell et al. 1999). Some of the dykes have proved to be diamondiferous (see Jensen et al. 2004a, b, for exploration results, diamond contents, and references). The c. 600 Ma old dykes werecalled ‘kimberlitic’ by Larsen & Rex (1992), but Mitchell et al. (1999) concluded that they were best referred to a ‘carbonatiteultramafic lamprophyre’ suite (aillikites or melnoites). Mitchell et al. (1999) further suggested that the West Greenland province represents “one of the few bona fide examples of ultramafic lamprophyre which contain diamonds”. Reports on indicator mineral assemblages (Jensen et al. 2004b) and diamond contents (e.g. Hudson Resources Inc. 2005) have re-opened the discussion on the classification of the dykes. The results of an investigation of the Majuagaa dyke (Nielsen & Jensen 2005) are summarised below, together with the preliminary results of a regional investigation of the groundmass minerals of the dykes. It is concluded that dykes in the Maniitsoq region are similar to archetypal, South African, on-craton, Type 1 kimberlites, and that all regions of the West Greenland province of ultramafic magmatism are favourable for diamond exploration
Hydrocarbon gases in Palaeogene volcanic rocks from the Lopra-1/1A well, Faroe Islands
No full textHydrocarbon gases were monitored in the drilling fluid during deepening of the Lopra-1 well from 2178–3565 m, in which thermogenic, methane-rich gases had been found previously. The mud gas concentration, up to 105 ppm of methane, was generally higher in the hyaloclastite sequence, 2470 m – terminal depth (TD), than in the overlying lavas of the lower basalt formation. The highest concentrations of mud gas in the lower basalt formation were associated with the more porous tuffaceous zones, whereas no simple relationship could be established between measured mud gas concentrations and porosity of the hyaloclastic rocks, which showed less marked porosity variations than the lavas. Chemical (C2+ < 1%) and isotopic (δ13C1: –34 to –39‰) compositions of seven samples of mud gas collected at peak gas concentrations between 2657 m and 3442 m compare well with those of the hydrocarbon gases which had been seeping more or less continuously into the existing well since 1983, suggesting a common origin of the gases. Headspace methane concentrations measured in 135 canned samples of cuttings were scattered between 10 ppm and 6 × 103 ppm, with the exception of six samples from a short interval, 2685– 2745 m, which showed consistently high values > 104 ppm. No particularly gas-rich zones were indicated, however, by the mud gas, nor was any significant change in lithology noted for this interval. It is possible that the technique of turbo-drilling, that had been attempted over a short interval, 2657– 2675 m prior to collection of the high-level methane samples, may have caused enhanced degassing due to the very fine cuttings produced. Chemical and isotopic composition of headspace gas and mud gas indicated the same type of gas throughout the well, although headspace methane tended to be more enriched with respect to the 13C isotope. The origin of the Lopra-1 gas is discussed in the light of recent information obtained from source rock studies of central East Greenland and the Faroe–Shetland Basin
A reconnaissance study of fluid inclusions in fracture-filling quartz and calcite from the Lopra-1/1A well, Faroe Islands
No full textFracture-filling calcite and quartz from the Lopra-1/1A well (at 2380 m and 3543 m depth) contains both aqueous low-salinity fluid inclusions and hydrocarbon-dominated fluid inclusions. Microthermometry indicates that the aqueous fluids contain 0.2 to 1.4 equivalent weight% NaCl and occasionally contain traces of hydrocarbons. Homogenisation to liquid occurred between 90°C and 150°C. Modelling based on these fluid inclusion observations indicates that during burial the basaltic section was subjected to temperatures of 160°C and 170°C, occasional pressures of 600–700 bars and the simultaneous percolation of aqueous and hydrocarbon fluids. These fluid conditions may also be relevant to the formation of zeolite observed in the Lopra-1/1A well
Shallow core drilling of the Upper Cretaceous Chalk at Stevns Klint, Denmark
No full textThe Upper Cretaceous – Danian succession in Denmark and most of NW Europe is composed mainly of chalk and associated shallower water carbonates deposited in a wide epeiric sea during an overall global sea-level highstand (e.g. Surlyk 1997). The Maastrichtian–Danian chalk has been intensely studied over the last 20 years, since it forms the most important reservoir rock for hydrocarbons in the North Sea Central Graben (e.g. Surlyk et al. 2003; Klinkby et al. 2005). In Denmark, thousands of water wells have been drilled through the succession as about 35% of the water consumption is from Maastrichtian chalk and Danian bryozoan limestone. During 2005 the new Cretaceous Research Centre (CRC) was established jointly at Geocenter Copenhagen by the Geological Institute, University of Copenhagen and the Geological Survey of Denmark and Greenland (GEUS) with financial support from the Danish Natural Science Research Council (FNU). CRC aims at studying the Earth System in a Greenhouse World, with special emphasis on the Upper Cretaceous – Danian chalk of NW Europe. The stable, long lasting marine macro-environment represented by the chalk sea provides a unique opportunity to analyse and link the depositional, geochemical and biological responses to external forcing at time scales ranging from the sub-Milankovitch to the million year range. The studies will be based on a wide range of methods, including seismic stratigraphy, palaeoecology, sequence-, cyclo- and biostratigraphy, isotope geochemistry, sedimentology and time series analysis. This paper presents the first preliminary results of a CRC drilling campaign at Stevns Klint, eastern Denmark (Fig. 1), where two shallow boreholes were drilled and logged from near the base of the Danian bryozoan limestone and down through the upper 350–450 m of the very thick Upper Cretaceous chalk section (Vejbæk et al. 2003). The cores represent the first complete sections through the Maastrichtian chalk of eastern Denmark
Stratigraphy and palaeoceanography of upper Maastrichtian chalks, southern Danish Central Graben
No full textUpper Maastrichtian chalks form important hydrocarbon reservoirs in the Danish sector of the North Sea and have been intensively studied, yet their lithological uniformity can frustrate attempts to develop a high-resolution stratigraphic subdivision and a genetic understanding of the factors controlling production and sedimentation of the pelagic carbonate ooze. Recent research into these topics, supported by the Danish Energy Authority, was carried out by the Geological Survey of Denmark and Greenland (GEUS) in collaboration with the Geological Institute, University of Copenhagen by means of a multidisciplinary study involvingquantitative/semiquantitative palynology, micropalaeontology (nannofossils, foraminifers) and isotope geochemistry, integrated with detailed sedimentology. Two key wells were selected, the M-10X well from the Dan Field and the E-5X well from the Tyra SE Field (Fig. 1), based on the extensive core coverage in these wells and on their position in the southern part of the Danish Central Graben where evidence of large-scale resedimentation (and consequent stratigraphic complexity) is uncommon within the Maastrichtian section. In focusing on such a pelagic carbonate system, the ultimate aim is a holistic understanding of the marine system including temperature variation, nutrient supply and distribution, salinity, watermass layering, circulation and oxygen distribution. All these factors influence organic productivity and thus the accumulation of biogenic sediment. This study concentrated on a number of palaeoceanographic signals that can be derived from the sedimentary record, summarised in Fig. 2. Planktonic organisms, both phytoplankton (e.g. coccolithophores, some dinoflagellates) and zooplankton (e.g. foraminifers) provide a record of conditions in the upper water masses, largely within the photic zone, while bottom conditions are indicated by epifaunal/infaunal organisms (e.g. benthic foraminifers) and bioturbation, and by the sedimentological evidence of depositional processes at the sea floor. On a larger scale, the input of terrestrial organic material relative to the marine component can provide an indirect measure of shoreline migration and thus relative sea-level change, a factor that is also reflected in the δ13C isotopic composition of the seawater, as recorded by the biogenic carbonate ooze
Spit-systems – an overlooked target in hydrocarbon exploration: the Holocene to Recent Skagen Odde, Denmark
No full textWell-constrained depositional models are essential for successful exploration and field development. The Skagen spitsystem offers a unique possibility for the establishment of a depositional model constrained by excellent outcrops, well-defined palaeogeography, good age control and detailed observations on hydrodynamics and morphology of the prograding part of the spit-system. The model offers a supplementary interpretation of shallow marine sandstones to the existing delta and linear shoreface models. The sand-dominated Skagen spit-system is c. 22 km long, 4 km wide and up to 35 m thick, with a sand volume of c. 2.2 km3. If filled with oil, this system would contain 0.6 km3 corresponding to 3.8 x 109 barrels assuming a porosity of 30% and an oil saturation of 90%. This is comparable in size with the largest Danish oil field (the Dan field), in the North Sea. Reservoir models for isolated linear ‘offshore’ sandstone bodies have been controversial for many years. Their size and internal indications of palaeocurrent directions are similar to those of the spit-system model, and this model may therefore be applicable for some of these bodies
The Nordre Strømfjord shear zone and the Arfersiorfik quartz diorite in Arfersiorfik, the Nagssugtoqidian orogen, West Greenland
No full textThe Nordre Strømfjord shear zone in the fjord Arfersiorfik, central West Greenland, consists of alternating panels of supracrustal rocks and orthogneisses which together form a vertical zone up to 7 km wide with sinistral transcurrent, ductile deformation, which occurred under middle amphibolite facies conditions. The pelitic and metavolcanic schists and paragneisses are all highly deformed, while the orthogneisses appear more variably deformed, with increasing deformation evident towards the supracrustal units. The c. 1.92 Ga Arfersiorfik quartz diorite is traceable for a distance of at least 35 km from the Inland Ice towards the west-south-west. Towards its northern contact with an intensely deformed schist unit it shows a similar pattern of increasing strain, which is accompanied by chemical and mineralogical changes. The metasomatic changes associated with the shear zone deformation are superimposed on a wide range of original chemical compositions, which reflect magmatic olivine and/or pyroxene as well as hornblende fractionation trends. The chemistry of the Arfersiorfik quartz diorite suite as a whole is comparable to that of Phanerozoic plutonic and volcanic rocks of calc-alkaline affinity
Thermal structure of the deep Lopra-1/1A borehole in the Faroe Islands
No full textInformation on temperature, temperature gradients, thermal conductivity and heat flow from the c. 3.5 km deep Lopra-1/1A borehole in the Faroe Islands is presented and analysed. The upper 2450 m of the drilled sequence consists of thick tholeiitic basalt flows and the deeper parts of hyaloclastites and thin beds of basalt. Temperature data originate from high precision temperature logging a long time after drilling to a depth of 2175 m (the original Lopra-1 borehole) and from commercial temperature logs measured a short time after drilling to a depth of 3430 m (Lopra-1/1A). The high-precision temperature log determines accurately levels of inflow of groundwater to the borehole and significant thermal disturbances to a depth of c. 1250 m. Below 1300 m, no significant disturbances are seen and interval temperature gradients for large depth intervals show only small variations between 28 and 33°C/km. The mean least-squares gradient for the depth interval of 1400–3430 m is 31.4°C/ km. In clear contrast to these overall very homogeneous, large-interval, mean temperature gradients, great local variability, between gradients of 20–25°C/km and 45°C/km, was observed between about 1300 and 2175 m (maximum depth of the high-resolution temperature log). These gradient variations are interpreted to be due to thermal conductivity variations and to reflect varying secondary mineralisation and mineral alterations. A preliminary analysis of the Lopra-1/1A temperature–depth function in terms of long-term palaeoclimatic signals indicates subsurface temperatures below about 1300 m to be in equilibrium with mean surface temperatures significantly below zero during the last glacial period. A subsequent temperature increase of 12–16°C occurred at around the termination of the last glaciation. The measured temperatures (some after correction) and the thermal regime below 1300 m seem to represent conductive equilibrium conditions without significant disturbances from the effect of drilling, groundwater flow or long-term palaeoclimatic surface temperature variations. Thermal conductivity measured on samples of basalt taken from drill cores and surface outcrops in the area of the borehole shows values within a rather narrow range and a well-defined mean value for low porosity basalts of about 1.8 W/m°C , while a few samples of lapilli-tuff/tuff from the borehole gave values around 1.9 W/m°C . Lapilli-tuff and tuff seem to have higher matrix (grain) conductivity than basalt. Heat flow is estimated at 60 ± 5 mW/m2. A heat flow of this magnitude is consistent with the Faroe Islands being underlain by continental crust
Continental crust in the Davis Strait: new evidence from seabed sampling
No full textAlthough the structural framework of the subsurface offshore West Greenland has been well documented based on comprehensive seismic analysis (cf. Dalhoff et al. 2003), the stratigraphy of the region is less well known. The oldest documented sedimentary rocks drilled offshore West Greenland are Santonian sandstones reached at TD in the 6354/4-1 well (Fig. 1) although reworked palynomorphs of Carboniferous, Triassic and Jurassic (Kimmeridgian) age have been reported from a number of wells in the region. In order to obtain better constraints on the pre-Upper Cretaceous stratigraphy, a preliminary screening was undertaken to identify inversion structures and erosional canyons where such deeper stratigraphic levels crop out at the seabed (Nielsen et al. 2001). Sea-floor sampling at selected sites between 62° and 67°N (Fig. 1) was undertaken during the summers of 2003 and 2004. Other objectives of these cruises were to seek direct evidence of active petroleum systems, to establish further constraints on tectonic and stratigraphic models, and to obtain a better understanding of the Neogene and Pleistocene history of the region (Dalhoff et al. 2005). The most promising seabed features identified by Nielsen et al. (2001) were investigated in more detail using a wide range of techniques in order to optimise sampling positions. In 2003, these techniques included echo sounder, side-scan sonar, single-channel seismic and video inspection before sampling either by dredge, gravity corer, or by video-controlled grab. In 2004, comprehensive data acquisition with a deep-water sparker system was undertaken before sampling by dredge or gravity corer, supplemented by grab samples at selected stations