SICOT-J - Société Internationale de Chirurgie Orthopédique et de Traumatologie
Not a member yet
578 research outputs found
Sort by
Reduced cutout for reverse oblique intertrochanteric hip fractures treated with trochanteric fixation advanced (TFN-A) nail compared to the short gamma-3 nail
No full textBackground: Reverse oblique fractures (AO/OTA 31-A3) account for 5–23% of all intertrochanteric fractures and are challenging to manage. The Gamma 3-Proximal Femoral Nail (GPFN) and the Trochanteric Fixation Nail Advanced (TFNA) are two common cephalomedullary systems used to treat this fracture. No study has reported on outcomes with the TFN-A for reverse oblique fractures. This study aimed to compare outcomes and complication rates in patients with reverse oblique fractures, treated with either TFNA or GPFN. Patients and methods: A total of 203 patients with reverse oblique fractures (137 in the GPFN group and 66 in the TFNA group), were treated in our institution between June 2010 and May 2019. Data was collected on postoperative radiological variables including screw or blade location, and tip-apex distance (TAD). Data were also collected for non-orthopaedic complication rates and orthopaedic complications. A sub-group analysis was additionally performed for different nail lengths. Results: We found no significant difference in the overall rate of complications and revisions between the two groups. Patients treated with the 235 mm TFN-A nail sustained lower rates of cutout, compared to 180 mm GPFN (GPFN: 6% TFN-A: 0%, p = 0.043). The frequency of revision surgeries and malunions/non-unions did not differ significantly between the two groups and additionally showed no difference in the subgroup analysis. Conclusion: The 235 mm TFN-A was associated with lower rates of cut-out compared to the short GPFN for reverse oblique intertrochanteric fractures. Future well-designed prospective studies are warranted to investigate the role of the TFN-A in improving outcomes for such fractures
How often do we need offset stems for revision total knee arthroplasty? About a consecutive series of 789 knees
No full textIntroduction: This study aimed to determine the incidence of offset stem usage in revision total knee arthroplasty (rTKA), and to assess the necessity for their use with the femoral and tibial components. Methods: This retrospective radiological study included 862 patients who underwent rTKA between 2010 and 2022. Patients were divided into a non-stem group (group NS), offset stem group (group OS), and straight stem group (group SS). Two senior orthopedic surgeons evaluated all the post-operative radiographs of the group OS to assess the necessity of offset use. Results: In total, 789 patients met all eligibility inclusion criteria and were reviewed (305 males (38.7%)) with a mean age of 72.7 ± 10.2 years old [39; 96]. Eighty-eight (11.1%) patients had undergone rTKA with offset stems (34 tibia, 31 femur, 24 both) and 609 (70.2%) with straight stems. The tibial and femoral stems were diaphyseal of over 75 mm in 83 revisions (94.3%) for group OS and 444 revisions (72.9%) for group SS (p < 0.001). Offset in the tibial component was located medially in 50% of rTKA, while the offset in the femoral component was placed anteriorly in 47.3% of the rTKA. Assessment by the two independent senior surgeons found stems were only necessary in 3.4% of cases. Offset stems were only required for the tibial implant. Discussion: Offset stems were used in 11.1% of revision total knee replacements, however, they were deemed necessary in 3.4% and for the tibial component only
Correction of cubitus valgus and reconstruction of lateral humerus condylar defect using tricortical iliac graft in pediatric patients
No full textBackground: Neglected non-united lateral humeral condyle fractures in pediatrics are a probable cause of cubitus valgus deformity which is a disabling complication. The ideal management for this condition is still debatable. This study aimed to evaluate the reconstruction of a non-united lateral humerus condylar fracture complicated by cubitus valgus using a tricortical iliac crest graft in pediatric patients. Patients and methods: Twenty children suffering from cubitus valgus as a complication after a non-united fracture of the lateral humeral condyle were included in this study. They were managed by open reduction, screw fixation, and reconstruction by an autologous tricortical iliac bone graft. We compared the preoperative and postoperative range of motion of the elbow, alignment, and elbow function using the Mayo elbow performance index. Results: There was a statistically significant improvement in the elbow range of motion postoperatively, and there was a highly significant improvement regarding the elbow alignment and function. Conclusion: Open reduction, screw fixation, and reconstruction by the autologous tricortical iliac bone graft is an effective technique for the management of cubitus valgus due to neglected non-united lateral humeral condyle fractures in pediatrics
No clinical difference at mid-term follow-up between TiN-coated versus uncoated cemented mobile-bearing total knee arthroplasty: a matched cohort study
No full textIntroduction: Nitride-based ceramic coating was introduced into surgical implants to improve hardness, reduce abrasion, and decrease the risk of metal-induced adverse reactions, especially for patients with suspected or identified metal hypersensitivity. The study aimed to evaluate the effectiveness and safety of a titanium nitride (TiN) coated prosthesis with a mobile bearing design. Methods: This was a retrospective matched-cohort study from a single center, comparing clinical outcomes between patients receiving either a TiN-coated versus an uncoated cobalt-chromium-molybdenum (CoCrMo) prostheses for primary total knee replacement. Seventeen patients received the TiN prosthesis between 2015 and 2019. These were matched 1:2 with patients receiving uncoated mobile-bearing knee prostheses with the same design manufacturer. Results: Fourteen patients in the TiN group had complete 5-year follow-up data and were compared with 34 patients from the CoCrMo group. The Knee Society Score was 170.6 ± 28.0 (Function subscore 83.7 ± 17.5 and Knee subscore 86.9 ± 13.8) in the TiN group and 180.7 ± 49.4 (Function subscore 87.5 ± 14.3 and Knee subscore 93.2 ± 9.6) in CoCrMo group, with no statistically significant difference (p = 0.19). One patient underwent a revision for instability requiring the removal of the implant in the TiN group and none in the CoCrMo group. The survival rates were 92.9% (CI95% 77.3–100.0) and 100.0% in the TiN group and CoCrMo group respectively (p = 1.0). Discussion: TiN-coated TKA with mobile bearing resulted in satisfactory clinical outcomes, and a low revision rate, and there was no complication related to the coated implant. The use of TiN-coated prostheses in case of confirmed or suspected metal allergy provides satisfactory short-term clinic outcomes
Measurement of spinopelvic sagittal alignment in the relaxed seated position rather than in the straight seated position is suitable for assessing spinopelvic mobility in patients before total hip arthroplasty
No full textPurpose: The relationship between spinopelvic mobility and dislocation in total hip arthroplasty (THA) has recently attracted attention. This study aimed to investigate the differences in sacral slope (SS) between two types of upright seated positions and to determine which seated position was appropriate for assessing spinopelvic mobility (change in SS from standing to sitting) before THA. Materials and methods: This prospective cohort study included 75 hips from 75 patients who had undergone primary THA. Each patient underwent preoperative lateral spinopelvic radiography in standing (st) and two seated positions: relaxed (rs) and straight (ss). The change in SS between each position (Δ) was measured. Results: Differences in all spinopelvic sagittal alignment parameters between the two seated positions were statistically significant (p 10°), 24 (46%) patients were misrepresented as having a stiff spine in the straight seated position (ΔSSst-ss < 10°). Conclusion: The change in SS from the straight to the relaxed seated position widely varied in patients before THA. The spinopelvic radiograph in the relaxed seated position is appropriate when evaluating spinopelvic mobility for preoperative planning
Accuracy of acetabular component alignment with surgical guidance systems during hip arthroplasty
No full textBackground: Navigation in total hip arthroplasty has been shown to improve acetabular positioning and can decrease the incidence of mal-positioned acetabular components. This study aimed to assess two surgical guidance systems by comparing intra-operative measurements of acetabular component inclination and anteversion with a post-operative CT scan. Methods: We prospectively collected intra-operative navigation data from 102 hips receiving conventional THA or hip resurfacing arthroplasty through either a direct anterior or posterior approach. Two guidance systems were used simultaneously: an inertial navigation system (INS) and an optical navigation system (ONS). Acetabular component anteversion and inclination were measured on a post-operative CT. Results: The average age of the patients was 64 years (range: 24–92) and the average BMI was 27 kg/m2 (range 19–38). 52% had hip surgery through an anterior approach. 98% of the INS measurements and 88% of the ONS measurements were within 10° of the CT measurements. The mean (and standard deviation) of the absolute difference between the postoperative CT and the intra-operative measurements for inclination and anteversion were 3.0° (2.8) and 4.5° (3.2) respectively for the ONS, along with 2.1° (2.3) and 2.4° (2.1) respectively for the INS. There was a significantly lower mean absolute difference to CT for the INS when compared to ONS in both anteversions (p < 0.001) and inclination (p = 0.02). Conclusions: We found that both inertial and optical navigation systems allowed for adequate acetabular positioning as measured on postoperative CT, and thus provide reliable intraoperative feedback for optimal acetabular component placement.
Level of Evidence: Therapeutic Level II
The effect of patient body mass index and sex on the magnification factor during pre-operative templating for total hip arthroplasty
No full textIntroduction: Pre-operative templating prior to hip arthroplasty has traditionally used implant-company-provided acetates, which assumed a magnification factor between 115% and 120%. In recent years, pre-operative planning has been performed with digital calibration devices, in order to calculate the magnification factor. However, these devices are not without their limitations and are not readily available at many institutions. As previous reports suggest a wide range of magnification factors, the determination of an optimal magnification factor is currently unclear. We investigated the relationship between obesity and gender on the magnification factor in order to improve the accuracy of pre-operative templating. Patients and methods: Ninety-seven consecutive pre-operative calibrated pelvic radiographs using the KingMark calibration were analyzed using the TraumaCad templating software. The magnification factor calculated by the software was considered the true magnification factor and analysis was made in order to assess the effect of sex and body mass index (BMI) on the magnification factor. A linear regression analysis was utilized to create a predictive model for optimal magnification factor value. Results: Magnification factor was significantly affected by sex (male, 120.0% vs. female 121.2%, p < 0.01) and by categorized BMI (obese 121.8% vs. non-obese 119.9%, p < 0.001). A positive linear association was found between BMI and the magnification factor (r = 0.544). The magnification factor was significantly different between the following sub-groups: obese female, non-obese female, obese male, and non-obese male (p < 0.001). When applying the model formulated by the linear regression analysis, the calculated magnification factor was within 2% of the true magnification factor for the majority of patients (n = 83, 85.6%). Conclusions: BMI and gender have a significant effect on the magnification factor. Future determination of the magnification factor should consider the influence of these variables in order to improve the accuracy of pre-operative templating in THA
Developmental dysplasia of the hip is common in patients undergoing total hip arthroplasty under 50 years of age
No full textIntroduction: Developmental dysplasia of the hip (DDH) refers to congenital and/or developmental hip instability that can result in hip joint subluxation or dislocation. When detected neonatally, conservative treatment with hip bracing can restore normal hip anatomy. Missed detection of DDH in the neonatal period or late development of DDH often requires surgical intervention to correct the abnormal anatomy. Furthermore, despite surgical intervention, residual sequelae may persist leading to early osteoarthritis of the hip joint requiring joint replacement surgery. Aim: This study investigates the prevalence of hip dysplasia in patients undergoing total hip arthroplasty (THA) under 50 years of age. Methods: The hip arthroplasty database at a national referral centre was investigated from January 2014 to December 2020. In patients under 50 years of age, those with an adequate pre-operative anteroposterior pelvic radiograph without previous hip arthroplasty were included, while those with inadequate radiographs were excluded. The following measurements were made on the contralateral non-operated hip: (1) lateral centre-edge angle (LCEA), (2) Tönnis angle, (3) acetabular version, (4) acetabular depth, (5) femoral head lateralisation, (6) femoral head extrusion index, and (7) acetabular depth-to-width ratio. Results: In total, 451 patients were included in this study. Twenty two percent of the patients had hip dysplasia, based on a LCEA of 10°. The mean LCEA and Tönnis angle were 31.47 ± 9.64 and 9.82 ± 6.79°, respectively. Conclusion: Hip dysplasia is common in patients undergoing THA under the age of 50 years with over 40% having dysplasia according to the Tönnis angle. Classification of primary and secondary osteoarthritis in the joint registries will benefit our knowledge on the prevalence of DDH in the adult population
No dislocation and low complication rate for a modern dual mobility cup with pre-impacted femoral head in primary hip replacement: A consecutive series of 175 hips at minimum 5-year follow-up
No full textIntroduction: Despite its excellent results in preventing dislocation, the dual mobility cup (DMC) is still struggling to be adopted by some teams due to premature wear and loosening reported on first-generation implants. Therefore, this study aimed to assess the mid-term survivorship of a modern DMC with a pre-impacted head and the radio-clinical results at a minimum follow-up of 5 years. Methods: This was a retrospective single-centre study performed on patients who had a primary total hip replacement for osteoarthritis in 2016. The cup was a third-generation DMC with a pre-impacted femoral head. Clinical (harris hip score (HHS)) and radiological (cup abduction, anteversion, overhang, and radiolucent lines) results were recorded, as well as complications, particularly dislocations and survivorship. A minimum of five years of follow-ups was required. Results: One hundred and seventy-five hips (167 patients) met the inclusion criteria. Five hips (2.9%, 5/175) were lost to follow-up and excluded from the postoperative analysis. The mean follow-up period was 70 ± 2.9 months [63.6–76.5]. Three cups needed revision surgery (1.8%, 3/170): one for septic loosening, and two for chronic infection. At 77 months, the global survival probability was 98.2% ± 1, and the survival probability excluding septic aetiology was 100%. There was a significant improvement in the HHS from pre-operatively (48.3 ± 6.0 [14.0–70.0]) to post-operatively (96 ± 4.5 [50–100]) (p < 0.0001). There were no postoperative dislocations recorded, nor any iliopsoas-impingement or symptomatic cam-effect. Discussion: This study showed excellent survival and good radiological and clinical results of this dual mobility cup at a mid-term follow-up. None of the patients had dislocation or any specific complication feared with dual mobility cups
Analysis of an explanted dual mobility cup after 21 years, parabolic wear pattern: A case report
No full textCase: A dual mobility cup was implanted in 1983 in a 43-year woman. After 31 years of normal function, we analysed the explanted materials with modern techniques. Conclusion: Volumetric wears of the small and large articulations of the dual-mobility construct were similar. For the first time, we demonstrated that the dual-mobility liner underwent parabolic (not linear) wear during the period of implantation