The European Journal of Physics N (EPJ-N)
Not a member yet
448 research outputs found
Sort by
Reactor performance, system reliability, instrumentation and control
No full textWe present a cross-cutting review of three on-going Horizon 2020 projects (ADVISE, NOMAD, TEAM CABLES) and one already finished FP7 project (HARMONICS), which address the reliability of safety-relevant components and systems in nuclear power plants, with a scope ranging from the pressure vessel and primary loop to safety-critical software systems and electrical cables. The paper discusses scientific challenges faced in the beginning and achievements made throughout the projects, including the industrial impact and lessons learned. Two particular aspects highlighted concern the way the projects sought contact with end users, and the balance between industrial and academic partners. The paper concludes with an outlook on follow-up issues related to the long term operation of nuclear power plants
SESAME project: advancements in liquid metal thermal hydraulics experiments and simulations
No full textLiquid metal cooled reactors are envisaged to play an important role in the future of nuclear energy production because of their possibility to use natural resources efficiently and to reduce the volume and lifetime of nuclear waste. Sodium and Liquid lead (-alloys) are considered the short and long term solution respectively, as coolant in GEN-IV reactor. Thermal-hydraulics of liquid metals plays a key role in the design and safety assessments of these reactors. Therefore, this is the main topic of a large European collaborative program (the Horizon 2020 SESAME) sponsored by the European Commission. This paper will present the progress in the project with respect to liquid metal cooled reactor thermal-hydraulics (liquid metal heat transfer, fuel assembly thermal-hydraulics, pool thermal-hydraulics, and system thermal-hydraulics). New reference data, both experimental and high-fidelity numerical data is being generated. And finally, when considering the system scale, the purpose is to validate and improve system thermal-hydraulics models and codes, but also to further develop and validate multi-scale approaches under development
Partitioning and transmutation contribution of MYRRHA to an EU strategy for HLW management and main achievements of MYRRHA related FP7 and H2020 projects: MYRTE, MARISA, MAXSIMA, SEARCH, MAX, FREYA, ARCAS
No full textToday, nuclear power produces 11% of the world's electricity. Nuclear power plants produce virtually no greenhouse gases or air pollutants during their operation. Emissions over their entire life cycle are very low. Nuclear energy's potential is essential to achieving a deeply decarbonized energy future in many regions of the world as of today and for decades to come, the main value of nuclear energy lies in its potential contribution to decarbonizing the power sector. Nuclear energy's future role, however, is highly uncertain for several reasons: chiefly, escalating costs and, the persistence of historical challenges such as spent fuel and radioactive waste management. Advanced nuclear fuel recycling technologies can enable full use of natural energy resources while minimizing proliferation concerns as well as the volume and longevity of nuclear waste. Partitioning and Transmutation (P&T) has been pointed out in numerous studies as the strategy that can relax constraints on geological disposal, e.g. by reducing the waste radiotoxicity and the footprint of the underground facility. Therefore, a special effort has been made to investigate the potential role of P&T and the related options for waste management all along the fuel cycle. Transmutation based on critical or sub-critical fast spectrum transmuters should be evaluated in order to assess its technical and economic feasibility and capacity, which could ease deep geological disposal implementation
Numerical design of thorium and uranium fuel samples irradiation in lead environment
No full textThe paper shows capabilities of thorium-lead fuel assembly for design of irradiation experiments on ThO2 and natural UO2 fuel samples using radioisotope neutron source. The main purpose of the current analysis was to determine the irradiation environment in the samples, especially: neutron spectrum, power, activity, reaction rates, production of 233Pa and 239Np as well as breeding of 233U and 239Pu. An advanced three-dimensional numerical model for Monte Carlo radiation transport and burnup simulations was developed using the Monte Carlo Continuous Energy Burnup Code (MCB). The versatility of the assembly gives a perfect opportunity to perform many irradiation experiments for R&D on the thorium and uranium fuel cycle in a different material and geometrical environments
Science underpinning the safety case of deep geological repositories − challenges in the past and in the future and how to maintain knowledge and competence during operation
No full textFinal repositories for spent nuclear fuel are approaching implementation. A prerequisite for these advancements is that it has been shown that the repository can be constructed and operated in practice in such a way that safety can be assured both during operation and over very long time scales. The success rests on decades of structured and objective-driven research and development. A key element of the research strategy has been to ensure adequate in-house competence and expertise. Also, openness and international cooperation are essential. Workable procedures for data qualification, version control as well as internal and external peer review have gained importance. When the programmes now enter a new phase of construction and operation new challenges will arise. Even if the implementing organisations would need to keep a core competence on post closure safety assessment international cooperation will be even more important on developing, sharing and managing the knowledge needed
Editorial : progress in the science and technology of nuclear reactors using molten salts
No full textUncertainty propagation based on correlated sampling technique for nuclear data applications
No full textA correlated sampling technique has been implemented to estimate the impact of cross section modifications on the neutron transport and in Monte Carlo simulations in one single calculation. This implementation has been coupled to a Total Monte Carlo approach which consists in propagating nuclear data uncertainties with random cross section files. The TMC-CS (Total Monte Carlo with Correlated Sampling) approach offers an interesting speed-up of the associated computation time. This methodology is detailed in this paper, together with two application cases to validate and illustrate the gain provided by this technique: the highly enriched uranium/iron metal core reflected by a stainless-steel reflector HMI-001 benchmark, and the PETALE experimental programme in the CROCUS zero-power light water reactor
Validating nuclear data uncertainties obtained from a statistical analysis of experimental data with the “Physical Uncertainty Bounds” method
No full textConcerns within the nuclear data community led to substantial increases of Neutron Data Standards (NDS) uncertainties from its previous to the current version. For example, those associated with the NDS reference cross section 239Pu(n,f) increased from 0.6–1.6% to 1.3–1.7% from 0.1–20 MeV. These cross sections, among others, were adopted, e.g., by ENDF/B-VII.1 (previous NDS) and ENDF/B-VIII.0 (current NDS). There has been a strong desire to be able to validate these increases based on objective criteria given their impact on our understanding of various application uncertainties. Here, the “Physical Uncertainty Bounds” method (PUBs) by Vaughan et al. is applied to validate evaluated uncertainties obtained by a statistical analysis of experimental data. We investigate with PUBs whether ENDF/B-VII.1 or ENDF/B-VIII.0 239Pu(n,f) cross-section uncertainties are more realistic given the information content used for the actual evaluation. It is shown that the associated conservative (1.5–1.8%) and minimal realistic (1.1–1.3%) uncertainty bounds obtained by PUBs enclose ENDF/B-VIII.0 uncertainties and indicate that ENDF/B-VII.1 uncertainties are underestimated
Safety assessments and severe accidents, impact of external events on nuclear power plants and on mitigation strategies
No full textThe Fukushima-Daiichi accidents in 2011 underlined the importance of severe accident management (SAM), including external events, in nuclear power plants (NPP) and the need of implementing efficient mitigation strategies. To this end, the Euratom work programmes for 2012 and 2013 was focused on nuclear safety, in particular on the management of a possible severe accident at the European level. Relying upon the outcomes of the successful Euratom SARNET and SARNET2 projects, new projects were launched addressing the highest priority issues, aimed at reducing the uncertainties still affecting the main phenomena. Among them, PASSAM and IVMR project led by IRSN, ALISA and SAFEST projects led by KIT, CESAM led by GRS and sCO2-HeRO lead by the University of Duisburg-Essen. The aim of the present paper is to give an overview on the main outcomes of these projects
Preliminary proliferation study of the molten salt fast reactor
No full textThe molten salt reactor designs, where fissile and fertile materials are dissolved in molten salts, under consideration in the framework of the Generation IV International Forum, present some unusual characteristics in terms of design, operation, safety and also proliferation resistance issues. This paper has the main objective of presenting some proliferation challenges for the reference version of the Molten Salt Fast Reactor (MSFR), a large power reactor based on the thorium fuel cycle. Preliminary studies of proliferation resistance are presented here, dedicated to the threat of nuclear material diversion in the MSFR, considering both the reactor system itself and the processing units located onsite