2893 research outputs found
Sort by
Nonlinear Numerical Modelling of Cable Elements in Bridges for Dynamic Analysis
Get PDFIdentifying cable force with vibration-based methods has become widely used in engineering practice due to simplicity of application. The string taut theory provides a simple definition of the relationship between natural frequencies and the tension force of a cable. However, this theory assumes a perfectly flexible non-sagging cable pinned at its ends. These assumptions do not reflect all cases, especially when the cable is short, under low tension forces or the supports are partially flexible. Extradosed bridges, which are distinguished from cable-stayed bridges by their low pylon height, have shorter cables. Therefore the application of the conventional string taut theory to identify cable forces on extradosed bridge cables might be inadequate to identify cable forces.
In this work, numerical modelling of an extradosed bridge cable saddled on a circular deviator at pylon is conducted. The model is validated with the catenary analytical solution and its static and dynamic behaviours are studied. The effect of a saddle support is found to positively affect the cable stiffness by geometric means; longer saddle radius increases the cable stiffness by suppressing the deformations near the saddle. Further, accounting the effects of bending stiffness in the numerical model by using beam elements show considerable deviation from models with truss elements (i.e. zero bending stiffness). This deviation is manifested when comparing the static and dynamic properties. This motivates a more thorough study of bending stiffness effects on short cables.
Bending stiffness effects are studied using two rods connected with several springs along their length. Under bending moments, the springs resist the rods' relative axial displacement by the springs' transverse component. This concept is used to identify bending stiffness values by utilizing the parallel axis theorem to quantify ratios of the second moment of area. These ratios are calculated based on the setup of the springs (e.g. number of springs per unit length, transverse stiffness, etc...). The numerical model based on this concept agrees well with the theoretical values computed using upper and lower bounds of the parallel axis theorem.
The proposed concept of quantifying ratios of the second moment of area using springs as connection between cable rods is applied on an actual extradosed bridge geometry. The model is examined by comparison to the previously validated global numerical model. The two models showed good correlation under various changing parameters. This allowed further study of the effects of stick/slip behaviour between cable rods on an actual bridge geometry
Nonlinear Analysis of Structures: Wind Induced Vibrations
Get PDFThe proceedings at hand are the result of the International Master Course Module: "Nonlinear Analysis of Structures: Wind Induced Vibrations" held at the Faculty of Civil Engineering at Bauhaus-University Weimar, Germany in the summer semester 2019 (April - August). This material summarizes the results of the project work done throughout the semester, provides an overview of the topic, as well as impressions from the accompanying programme.
Wind Engineering is a particular field of Civil Engineering that evaluates the resistance of structures caused by wind loads. Bridges, high-rise buildings, chimneys and telecommunication towers might be susceptible to wind vibrations due to their increased flexibility, therefore a special design is carried for this aspect. Advancement in technology and scientific studies permit us doing research at small scale for more accurate analyses. Therefore scaled models of real structures are built and tested for various construction scenarios. These models are placed in wind tunnels where experiments are conducted to determine parameters such as: critical wind speeds for bridge decks, static wind coefficients and forces for buildings or bridges. The objective of the course was to offer insight to the students into the assessment of long-span cable-supported bridges and high-rise buildings under wind excitation. The participating students worked in interdisciplinary teams to increase their knowledge in the understanding and influences on the behaviour of wind-sensitive structures
Matrixfreie voxelbasierte Finite-Elemente-Methode für Materialien mit komplizierter Mikrostruktur
Get PDFModern image detection techniques such as micro computer tomography
(μCT), magnetic resonance imaging (MRI) and scanning electron microscopy (SEM) provide us with high resolution images of the microstructure of materials in a non-invasive and convenient way. They form the basis for the geometrical models of high-resolution analysis, so called image-based analysis.
However especially in 3D, discretizations of these models reach easily the size of 100 Mill. degrees of freedoms and require extensive hardware resources in terms of main memory and computing power to solve the numerical model. Consequently, the focus of this work is to combine and adapt numerical solution methods to reduce the memory demand first and then the computation time and therewith enable an execution of the image-based analysis on modern computer desktops. Hence, the numerical model is a straightforward grid discretization of the voxel-based (pixels with a third dimension) geometry which omits the boundary detection algorithms and allows reduced storage of the finite element data structure and a matrix-free solution algorithm.
This in turn reduce the effort of almost all applied grid-based solution techniques and results in memory efficient and numerically stable algorithms for the microstructural models. Two variants of the matrix-free algorithm are presented. The efficient iterative solution method of conjugate gradients is used with matrix-free applicable preconditioners such as the Jacobi and the especially suited multigrid method. The jagged material boundaries of the voxel-based mesh are smoothed through embedded boundary elements which contain different material information at the integration point and are integrated sub-cell wise though without additional boundary detection. The efficiency of the matrix-free methods can be retained.Moderne bildgebende Verfahren wie Mikro-Computertomographie (μCT), Magnetresonanztomographie (MRT) und Rasterelektronenmikroskopie (SEM) liefern nicht-invasiv hochauflösende Bilder der Mikrostruktur von Materialien. Sie bilden die Grundlage der geometrischen Modelle der hochauflösenden bildbasierten Analysis. Allerdings erreichen vor allem in 3D die Diskretisierungen dieser Modelle leicht die Größe von 100 Mill. Freiheitsgraden und erfordern umfangreiche Hardware-Ressourcen in Bezug auf Hauptspeicher und Rechenleistung, um das numerische Modell zu lösen. Der Fokus dieser Arbeit liegt daher darin, numerische Lösungsmethoden zu kombinieren und anzupassen, um den Speicherplatzbedarf und die Rechenzeit zu reduzieren und damit eine Ausführung der bildbasierten Analyse auf modernen Computer-Desktops zu ermöglichen. Daher ist als numerisches Modell eine einfache Gitterdiskretisierung der voxelbasierten (Pixel mit der Tiefe als dritten Dimension)
Geometrie gewählt, die die Oberflächenerstellung weglässt und eine reduzierte Speicherung der finiten Elementen und einen matrixfreien Lösungsalgorithmus ermöglicht. Dies wiederum verringert den Aufwand von fast allen angewandten gitterbasierten Lösungsverfahren und führt zu Speichereffizienz und numerisch stabilen Algorithmen für die Mikrostrukturmodelle. Es werden zwei Varianten der Anpassung der matrixfreien Lösung präsentiert, die Element-für-Element Methode und eine Knoten-Kanten-Variante. Die Methode der konjugierten Gradienten in Kombination mit dem Mehrgitterverfahren als sehr effizienten Vorkonditionierer wird für den matrixfreien Lösungsalgorithmus adaptiert. Der stufige Verlauf der Materialgrenzen durch die voxelbasierte Diskretisierung wird durch Elemente geglättet, die am Integrationspunkt unterschiedliche Materialinformationen enthalten und über Teilzellen integriert werden (embedded boundary elements). Die Effizienz der matrixfreien Verfahren bleibt erhalten
Structural Optimization of Composite Cross-Sections and Elements using Energy Methods
Get PDFStructural optimization has gained considerable attention in the design of structural engineering structures, especially in the preliminary phase.
This study introduces an unconventional approach for structural optimization by utilizing the Energy method with Integral Material Behavior (EIM), based on the Lagrange’s principle of minimum potential energy. An automated two-level optimization search process is proposed, which integrates the EIM, as an alternative method for nonlinear
structural analysis, and the bilevel optimization. The proposed procedure secures the equilibrium through minimizing the potential energy on one level, and on a higher level, a design objective function. For this, the most robust strategy of bilevel optimization, the nested method is used. The function of the potential energy is investigated along with its instabilities for physical nonlinear analysis through principle examples, by which the advantages and limitations using this method are reviewed. Furthermore, optimization algorithms are discussed.
A numerical fully functional code is developed for nonlinear cross section,
element and 2D frame analysis, utilizing different finite elements and is verified
against existing EIM programs. As a proof of concept, the method is applied on selected
examples using this code on cross section and element level. For the former one a
comparison is made with standard procedure, by employing the equilibrium equations
within the constrains. The validation of the element level was proven by a theoretical
solution of an arch bridge and finally, a truss bridge is optimized. Most of the
principle examples are chosen to be adequate for the everyday engineering practice, to
demonstrate the effectiveness of the proposed method.
This study implies that with further development, this method could become just as
competitive as the conventional structural optimization techniques using the Finite
Element Method
Rigorous Connectionist Models to Predict Carbon Dioxide Solubility in Various Ionic Liquids
Get PDFEstimating the solubility of carbon dioxide in ionic liquids, using reliable models, is of paramount importance from both environmental and economic points of view. In this regard, the current research aims at evaluating the performance of two data-driven techniques, namely multilayer perceptron (MLP) and gene expression programming (GEP), for predicting the solubility of carbon dioxide (CO2) in ionic liquids (ILs) as the function of pressure, temperature, and four thermodynamical parameters of the ionic liquid. To develop the above techniques, 744 experimental data points derived from the literature including 13 ILs were used (80% of the points for training and 20% for validation). Two backpropagation-based methods, namely Levenberg–Marquardt (LM) and Bayesian Regularization (BR), were applied to optimize the MLP algorithm. Various statistical and graphical assessments were applied to check the credibility of the developed techniques. The results were then compared with those calculated using Peng–Robinson (PR) or Soave–Redlich–Kwong (SRK) equations of state (EoS). The highest coefficient of determination (R2 = 0.9965) and the lowest root mean square error (RMSE = 0.0116) were recorded for the MLP-LMA model on the full dataset (with a negligible difference to the MLP-BR model). The comparison of results from this model with the vastly applied thermodynamic equation of state models revealed slightly better performance, but the EoS approaches also performed well with R2 from 0.984 up to 0.996. Lastly, the newly established correlation based on the GEP model exhibited very satisfactory results with overall values of R2 = 0.9896 and RMSE = 0.0201
Expanded Pictures: Das Handlungsgefüge des fotografischen Bildes im Kontext von Internet und Social Media
Get PDFIn der vorliegenden Arbeit wird die Bedeutung und Funktion des fotografischen Bildes und im Besonderen der Handyfotografie im Kontext von Internet und sozialen Onlinenetzwerken beschrieben, untersucht und diskutiert.
Im Spannungsfeld zwischen sozialwissenschaftlichen Theorien, foto- und medientheoretischem Diskurs sowie ästhetisch künstlerischen Perspektiven wird ausgelotet, welche konkreten visuellen und sozialen Formen die gegenwärtige mobile digitale Bildpraxis angenommen hat, wie sich ihre Gebrauchsweise innerhalb des globalen gesellschaftlichen Alltags darstellt, und in welcher Weise ihr spezielles Zusammenspiel aus „shooting“, „uploading“, „sharing“ zu neuen menschlichen Handlungsmustern und zur Schaffung neuer kultureller Realitäten beiträgt
Examining Trade-Offs between Social, Psychological, and Energy Potential of Urban Form
Get PDFUrban planners are often challenged with the task of developing design solutions which must meet multiple, and often contradictory, criteria. In this paper, we investigated the trade-offs between social, psychological, and energy potential of the fundamental elements of urban form: the street network and the building massing. Since formal mehods to evaluate urban form from the psychological and social point of view are not readily available, we developed a methodological framework to quantify these criteria as the first contribution in this paper. To evaluate the psychological potential, we conducted a three-tiered empirical study starting from real world environments and then abstracting them to virtual environments. In each context, the implicit (physiological) response and explicit (subjective) response of pedestrians were measured. To quantify the social potential, we developed a street network centrality-based measure of social accessibility.
For the energy potential, we created an energy model to analyze the impact of pure geometric form on the energy demand of the building stock. The second contribution of this work is a method to identify distinct clusters of urban form and, for each, explore the trade-offs between the select design criteria. We applied this method to two case studies identifying nine types of urban form and their respective potential trade-offs, which are directly applicable for the assessment of strategic decisions regarding urban form during the early planning stages
Jazzforschung heute
Get PDFDie internationale Jazzforschung hat sich in den vergangenen Jahrzehnten zahlreiche neue Fragestellungen und Forschungsansätze erschlossen. So sind etwa die globalen Dimensionen des Jazz, die Rolle von Frauen im Jazz oder seine mannigfaltigen kulturellen Bedeutungen in Geschichte und Gegenwart ins Zentrum der Forschung gerückt. Die dreizehn Beiträge des Tagungsbandes widmen sich Themen, Methoden und Desideraten der gegenwärtigen wissenschaftlichen Auseinandersetzung mit dem Jazz. Zudem werden Perspektiven des künstlerischen Forschens im Jazz und der Ausbildung von Jazzmusikern und -forschern diskutiert
Kire – ‚Reine Gewalt‘ im japanischen Film
Get PDFDas japanische Prinzip des Schnittkontinuums (kire-tsuzuki) als Horizont für eine Theorie der filmischen Ästheti
Retrieval Enhancements for Task-Based Web Search
Get PDFThe task-based view of web search implies that retrieval should take the user perspective into account. Going beyond merely retrieving the most relevant result set for the current query, the retrieval system should aim to surface results that are actually useful to the task that motivated the query.
This dissertation explores how retrieval systems can better understand and support their users’ tasks from three main angles: First, we study and quantify search engine user behavior during complex writing tasks, and how task success and behavior are associated in such settings. Second, we investigate search engine queries formulated as questions, and explore patterns in a large query log that may help search engines to better support this increasingly prevalent interaction pattern. Third, we propose a novel approach to reranking the search result lists produced by web search engines, taking into account retrieval axioms that formally specify properties of a good ranking.Die Task-basierte Sicht auf Websuche impliziert, dass die Benutzerperspektive berücksichtigt werden sollte. Über das bloße Abrufen der relevantesten Ergebnismenge für die aktuelle Anfrage hinaus, sollten Suchmaschinen Ergebnisse liefern, die tatsächlich für die Aufgabe (Task) nützlich sind, die diese Anfrage motiviert hat.
Diese Dissertation untersucht, wie Retrieval-Systeme die Aufgaben ihrer Benutzer besser verstehen und unterstützen können, und leistet Forschungsbeiträge unter drei Hauptaspekten: Erstens untersuchen und quantifizieren wir das Verhalten von Suchmaschinenbenutzern während komplexer Schreibaufgaben, und wie Aufgabenerfolg und Verhalten in solchen Situationen zusammenhängen. Zweitens untersuchen wir Suchmaschinenanfragen, die als Fragen formuliert sind, und untersuchen ein Suchmaschinenlog mit fast einer Milliarde solcher Anfragen auf Muster, die Suchmaschinen dabei helfen können, diesen zunehmend verbreiteten Anfragentyp besser zu unterstützen. Drittens schlagen wir einen neuen Ansatz vor, um die von Web-Suchmaschinen erstellten Suchergebnislisten neu zu sortieren, wobei Retrieval-Axiome berücksichtigt werden, die die Eigenschaften eines guten Rankings formal beschreiben