2893 research outputs found
Sort by
Experimental Analyses on the Resistance of Tapped Blind Holes
No full textBolted connections are commonly used in steel construction. The load-bearing behavior of bolt fittings has extensively been studied in various research activities and the bearing capacity of bolted connections can be assessed well by standard regulations for practical applications. With regard to tensile loading, the nut does not have strong influence on resistances, since the failure occurs in the bolts due to higher material strengths of the nuts. In some applications, so-called “blind holes” are used to connect plated components. In a manner of speaking, the nut is replaced by the “outer” plate with a prefabricated hole and thread, in which the bolt can be screwed and tightened. In such connections, the limit load capacity cannot solely be assessed by the bolt resistance, since the threaded hole in the base material has strong influence on the structural behavior. In this context, the available screw-in depth of the blind hole is of fundamental importance. The German National Annex of EN 1993-1-8 provides information on a necessary depth in order to transfer the full tensile capacity of the bolt. However, some connections do not allow to fabricate such depths. In these cases, the capacity of the connection is unclear and not specified. In this paper, first experiments on corresponding connections with different screw-in depths are presented and compared to limit load capacities according to the standard
Why do the Archives archive? A journey from the hunko to the counter-ethnography and back
No full textA complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candomblé. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice
Die Haltungen des Architekten Luigi Snozzi. Untersucht am Beispiel des Projektes Monte Carasso
No full textWelche Haltung spricht aus den Werken von Architekt*innen? Lassen sich Werte und Handlungsanweisungen von Mauern und Plänen ablesen? Luigi Snozzis Entwürfe für Monte Carasso werden in dieser Arbeit exemplarisch darauf untersucht. Sie zeugen von der Verantwortung, die jede*r Architekt*in für das Umfeld hat, in dem sie oder er baut
The Space In-Between. Tracing Transformative Processes in Nicosia’s Buffer Zone.
No full textThis thesis examines urban partition in Nicosia, the capital of Cyprus, and how its changing roles and shifting perceptions in a post-conflict setting reflect power relations, and their constant renegotiation. Nicosia, the capital of Cyprus, was officially divided in 1974 in the aftermath of an eighteen-year-long conflict between the island’s Turkish- and Greek-Cypriot communities. As a result, a heavily militarized Buffer Zone, established as an emergency measure against perpetuation of intercommunal violence, has been cutting through its historic centre ever since.
This thesis departs from a genuine interest in the material and ideational dimensions of urban partition. How is it constructed, not merely in physical terms but in the minds of the societies affected by conflict? How is it established in official and everyday discourses? What kinds of mechanisms have been developed to maintain it, and make an inseparable part of the urban experience? Moreover, taking into account the consensus in relevant literature pertaining to the imperative for its removal, this thesis is inquiring into the relevance of peace agreements to overcoming urban partition. For this purpose, it also looks at narratives and practices that have attempted to contest it.
The examples examined in this thesis offer pregnant analytical moments to understand Nicosia’s Buffer Zone as a dynamic social construct, accommodating multiple visions of and for the city. Its space ‘in-between’ facilitates encounters between various actors, accommodates new meanings, socio-spatial practices and diverse imaginaries. In this sense, urban partition is explored in this thesis as a phenomenon that transcends scales as well as temporalities, entwining past, present, and future
Verflechtungen im städtischen Gefüge. Rezension zu Barbara Heer (2019): Cities of entanglements. Social life in Johannesburg and Maputo through ethnographic comparison
No full textDieser Artikel rezensiert die überarbeitete Version von Barbara Heers Dissertation zu städtischen Verflechtungen in Johannesburg und Maputo. Das Buch ist 2019 im Transcript Verlag erschienen und umfasst 337 Seiten
Nonlocal strong forms of thin plate, gradient elasticity, magneto-electro-elasticity and phase-field fracture by nonlocal operator method
No full textThe derivation of nonlocal strong forms for many physical problems remains cumbersome in traditional methods. In this paper, we apply the variational principle/weighted residual method based on nonlocal operator method for the derivation of nonlocal forms for elasticity, thin plate, gradient elasticity, electro-magneto-elasticity and phase-field fracture method. The nonlocal governing equations are expressed as an integral form on support and dual-support. The first example shows that the nonlocal elasticity has the same form as dual-horizon non-ordinary state-based peridynamics. The derivation is simple and general and it can convert efficiently many local physical models into their corresponding nonlocal forms. In addition, a criterion based on the instability of the nonlocal gradient is proposed for the fracture modelling in linear elasticity. Several numerical examples are presented to validate nonlocal elasticity and the nonlocal thin plate
Reconstruction of calcium silicate hydrates using multiple 2D and 3D imaging techniques: Light microscopy, μ-CT, SEM, FIB-nT combined with EDX
No full textThis study demonstrates the application and combination of multiple imaging techniques [light microscopy, micro-X-ray computer tomography (μ-CT), scanning electron microscopy (SEM) and focussed ion beam – nano-tomography (FIB-nT)] to the analysis of the microstructure of hydrated alite across multiple scales. However, by comparing findings with mercury intrusion porosimetry (MIP), it becomes obvious that the imaged 3D volumes and 2D images do not sufficiently overlap at certain scales to allow a continuous quantification of the pore size distribution (PSD). This can be overcome by improving the resolution and increasing the measured volume. Furthermore, results show that the fibrous morphology of calcium-silicate-hydrates (C-S-H) phases is preserved during FIB-nT. This is a requirement for characterisation of nano-scale porosity. Finally, it was proven that the combination of FIB-nT with energy-dispersive X-ray spectroscopy (EDX) data facilitates the phase segmentation of a 11 × 11 × 7.7 μm3 volume of hydrated alite
Fungal Future – Der Zukunft gewachsen
No full textDie Auswirkungen der durch den Kapitalismus befeuerten Umweltzerstörung werden immer deutlicher erkennbar. Unsere Gesellschaft ist nun damit konfrontiert, dass ihre kulturelle Identität, aber auch ihr Wohlstand sowohl eng mit Konsum und Wirtschaftswachstum als auch mit der Gesundheit der Natur verbunden sind. Es scheint ein geeigneter Moment, um die Perspektive zu wechseln und einer neuen Form des Wachstums eine Chance zu geben. Pilze sind eine von der Region unabhängige, natürlich vorkommende Ressource, die lokal angebaut und verarbeitet werden kann, ohne die Umwelt zu belasten. Pilze sind klimafreundlich, müllvermeidend und in bestehende natürliche Kreisläufe inkludierbar. Kurzum, Pilze sind cool, doch das wissen nicht Viele. Das sollte sich ändern. Mit Myzelwachstum gegen das Wachstumsparadigma
Nanopore creation in MoS2 and graphene monolayers by nanoparticles impact: a reactive molecular dynamics study
No full textIn this work, extensive reactive molecular dynamics simulations are conducted to analyze the nanopore creation by nano-particles impact over single-layer molybdenum disulfide (MoS2) with 1T and 2H phases. We also compare the results with graphene monolayer. In our simulations, nanosheets are exposed to a spherical rigid carbon projectile with high initial velocities ranging from 2 to 23 km/s. Results for three different structures are compared to examine the most critical factors in the perforation and resistance force during the impact. To analyze the perforation and impact resistance, kinetic energy and displacement time history of the projectile as well as perforation resistance force of the projectile are investigated.
Interestingly, although the elasticity module and tensile strength of the graphene are by almost five times higher than those of MoS2, the results demonstrate that 1T and 2H-MoS2 phases are more resistive to the impact loading and perforation than graphene. For the MoS2nanosheets, we realize that the 2H phase is more resistant to impact loading than the 1T counterpart.
Our reactive molecular dynamics results highlight that in addition to the strength and toughness, atomic structure is another crucial factor that can contribute substantially to impact resistance of 2D materials. The obtained results can be useful to guide the experimental setups for the nanopore creation in MoS2or other 2D lattices
QM Fibel. Erderfolgreiches Qualitätsmanagement für Architekten und Ingenieure
No full text"Qualitätsmanagement (QM) ist im Sinne reibungslos funktionierender Abläufe ein unverzichtbarer Bestandteil jedes Büros, unabhängig von der Größe und dem Kerngeschäft und unabhängig davon, ob ein Zertifizierungsverfahren durchlaufen
wird oder nicht. Im Laufe der Jahre werden in Ingenieur- und Architekturbüros meist zahlreiche organisatorische Einzelregelungen getroffen, die den Alltag erleichtern sollen. Eine systematische Zusammenstellung, Einführung und Kontrolle unterbleibt jedoch oft. Häufig schrecken die Verantwortlichen vor dem vermeintlichen Aufwand für die systematische Zusammenstellung in einem QM-Handbuch und dem vermeintlich noch viel größeren Aufwand für eine externe Überprüfung im Rahmen eines externen Audits mit anschließender Zertifizierung zurück. Der
Nutzen, der alleine schon durch ein passgenau aufgebautes und gelebtes QMHandbuch entsteht, wird nicht realisiert.
Der QM-Standard „Planer am Bau“ (PaB) ist ein branchenspezifischer Standard, der gezielt für Ingenieur- und Architekturbüros entwickelt worden ist und ausschließlich deren Belange berücksichtigt. Im Ergebnis entstehen nach klaren Vorgaben der Mindestanforderungen schlanke, auf die jeweiligen Bürobesonderheiten angepasste Handbücher, die durch den TÜV Rheinland auditiert und zertifiziert werden
können. Der Nachweis eines wirksamen QM-Systems ist mit diesem Zertifikat erbracht, was unter anderem in VgV-Ausschreibungen Vorteile bringen kann.