NILU Brage
Not a member yet
3619 research outputs found
Sort by
Quantification and assessment of methane emissions from offshore oil and gas facilities on the Norwegian continental shelf
Get PDFThe oil and gas (O&G) sector is a significant source of methane (CH4) emissions. Quantifying these emissions remains challenging, with many studies highlighting discrepancies between measurements and inventory-based estimates. In this study, we present CH4 emission fluxes from 21 offshore O&G facilities collected in 10 O&G fields over two regions of the Norwegian continental shelf in 2019. Emissions of CH4 derived from measurements during 13 aircraft surveys were found to range from 2.6 to 1200 t yr−1 (with a mean of 211 t yr−1 across all 21 facilities). Comparing this with aggregated operator-reported facility emissions for 2019, we found excellent agreement (within 1σ uncertainty), with mean aircraft-measured fluxes only 16 % lower than those reported by operators. We also compared aircraft-derived fluxes with facility fluxes extracted from a global gridded fossil fuel CH4 emission inventory compiled for 2016. We found that the measured emissions were 42 % larger than the inventory for the area covered by this study, for the 21 facilities surveyed (in aggregate). We interpret this large discrepancy not to reflect a systematic error in the operator-reported emissions, which agree with measurements, but rather the representativity of the global inventory due to the methodology used to construct it and the fact that the inventory was compiled for 2016 (and thus not representative of emissions in 2019). This highlights the need for timely and up-to-date inventories for use in research and policy. The variable nature of CH4 emissions from individual facilities requires knowledge of facility operational status during measurements for data to be useful in prioritising targeted emission mitigation solutions. Future surveys of individual facilities would benefit from knowledge of facility operational status over time. Field-specific aggregated emissions (and uncertainty statistics), as presented here for the Norwegian Sea, can be meaningfully estimated from intensive aircraft surveys. However, field-specific estimates cannot be reliably extrapolated to other production fields without their own tailored surveys, which would need to capture a range of facility designs, oil and gas production volumes, and facility ages. For year-on-year comparison to annually updated inventories and regulatory emission reporting, analogous annual surveys would be needed for meaningful top-down validation. In summary, this study demonstrates the importance and accuracy of detailed, facility-level emission accounting and reporting by operators and the use of airborne measurement approaches to validate bottom-up accounting.Quantification and assessment of methane emissions from offshore oil and gas facilities on the Norwegian continental shelfpublishedVersio
Thymidine Kinase+/− Mammalian Cell Mutagenicity Assays for Assessment of Nanomaterials
Get PDFThe methods outlined here are part of a series of papers designed specifically for genotoxicity assessment of nanomaterials (NM). Common Considerations such as NM characterization, sample preparation and dose selection, relevant to all genotoxicity assays, are found in an accompanying paper. The present paper describes methods for evaluation of mutagenicity in the mammalian (mouse) thymidine kinase (Tk) gene occurring in L5178Y mouse lymphoma (ML) cells and in the designated TK gene in human lymphoblastoid TK6 cells. Mutations change the functional genotype from TK+/− to TK−/−, detectable as cells surviving on media selective for the lack of thymidine kinase (TK) function. Unlike cells with TK enzyme function, the TK−/− cells are unable to integrate the toxic selection agent, allowing these cells to survive as rare mutant colonies. The ML assay has been shown to detect a broad spectrum of genetic damage, including both small scale (point) mutations and chromosomal alterations. This assay is a widely used mammalian cell gene mutation assay for regulatory purposes and is included in the core battery of genotoxicity tests for regulatory decision-making. The TK6 assay is an assay using a human cell line derived similarly via mutagenic manipulations and optimal selection. Details are provided on the materials required, cell culture methods, selection of test chemical concentrations, cytotoxicity, treatment time, mutation expression, cloning, and data calculation and interpretation. The methods describe the microwell plate version of the assays without metabolic activation.Thymidine Kinase+/− Mammalian Cell Mutagenicity Assays for Assessment of NanomaterialspublishedVersio
Overvåking av langtransporterte atmosfæriske miljøgifter i luft og nedbør, årsrapport 2021.
Get PDFThis report presents data from 2021 and time-trends for the Norwegian monitoring programme "Atmospheric contaminants". The results cover 200 organic compounds (regulated and non-regulated), 11 heavy metals, and a selection of organic chemicals of concern.Denne rapporten inkluderer miljøovervåkningsdata fra 2021 og tidstrender for programmet Atmosfæriske miljøgifter. Resultatene omfatter 200 organiske miljøgifter (regulerte og ennå ikke regulerte), 11 tungmetaller og et utvalg organiske kjemikalier av bekymring for miljøet.publishedVersio
Estimation of the corrosion class from environmental parameters in Fitjar. Location (59°56'11.5"N 5°19'58.4"Ø).
Get PDFKorrosjonsklasse ble beregnet på lokasjon (59°56'11.5"N 5°19'58.4"Ø) i Fitjar, Vestland, Norge, fra årsgjennomsnitt for miljøparametere etter ISO 9223 og ISO 12944-2. Det ble funnet at korrosjonsklassen med høy sannsynlighet er C3 og at dette i hovedsak er bestemt av våt-tiden på omtrent 4500 timer/år, som gjennomsnitt i perioden 2007-2022. Dette er godt innenfor grensene for C3 når saltavsetningen er < 60 mg Cl-/m2døgn og SO2 konsentrasjonen i luft < 30 µg/m3. Disse betingelsene synes med stor sannsynlighet oppfylt på lokasjonen i Fitjar som årsgjennomsnitt i normalår.The corrosion class was estimated on location (59°56'11.5"N 5°19'58.4"Ø) in Fitjar, Vestland, Norway, from annual average environmental values, based on ISO 9223 and ISO 12944-2. It was found that the corrosion class was, with high probability, C3, and mostly determined by the time of wetness (TOW) of about 4500 h/a, as an average for the years 2007-2022. This is well within the limits of C3 when the sea-salt deposition is < 60 mg Cl-/m2day (24 hours) and the SO2-concentration in air < 30 μg/m3. These conditions seem satisfied with a high probability on the location in Fitjar, as annual averages in normal years.publishedVersio
Clean air policies are key for successfully mitigating Arctic warming
Get PDFA tighter integration of modeling frameworks for climate and air quality is urgently needed to assess the impacts of clean air policies on future Arctic and global climate. We combined a new model emulator and comprehensive emissions scenarios for air pollutants and greenhouse gases to assess climate and human health co-benefits of emissions reductions. Fossil fuel use is projected to rapidly decline in an increasingly sustainable world, resulting in far-reaching air quality benefits. Despite human health benefits, reductions in sulfur emissions in a more sustainable world could enhance Arctic warming by 0.8 °C in 2050 relative to the 1995–2014, thereby offsetting climate benefits of greenhouse gas reductions. Targeted and technically feasible emissions reduction opportunities exist for achieving simultaneous climate and human health co-benefits. It would be particularly beneficial to unlock a newly identified mitigation potential for carbon particulate matter, yielding Arctic climate benefits equivalent to those from carbon dioxide reductions by 2050.publishedVersio
Springtime nitrogen oxides and tropospheric ozone in Svalbard: results from the measurement station network
Get PDFSvalbard is a remote and scarcely populated Arctic archipelago and is considered to be mostly influenced by long-range-transported air pollution. However, there are also local emission sources such as coal and diesel power plants, snowmobiles and ships, but their influence on the background concentrations of trace gases has not been thoroughly assessed. This study is based on data of tropospheric ozone (O3) and nitrogen oxides (NOx) collected in three main Svalbard settlements in spring 2017. In addition to these ground-based observations and radiosonde and O3 sonde soundings, ERA5 reanalysis and BrO satellite data have been applied in order to distinguish the impact of local and synoptic-scale conditions on the NOx and O3 chemistry. The measurement campaign was divided into several sub-periods based on the prevailing large-scale weather regimes. The local wind direction at the stations depended on the large-scale conditions but was modified due to complex topography. The NOx concentration showed weak correlation for the different stations and depended strongly on the wind direction and atmospheric stability. Conversely, the O3 concentration was highly correlated among the different measurement sites and was controlled by the long-range atmospheric transport to Svalbard. Lagrangian backward trajectories have been used to examine the origin and path of the air masses during the campaign.publishedVersio
Modified Target Diagram to check compliance of low-cost sensors with the Data Quality Objectives of the European air quality directive
Get PDFThe modified Target Diagram (MTD) was developed to evaluate the performance of low-cost sensors (LCS) for air quality monitoring in comparison with reference methods by reporting relative expanded uncertainty and its contributors. An MTD provides several pieces of information, including compliance with regulation, sources of error and how to diminish them, completeness and validity of LCS calibration etc. It allows the user to examine the effect of selecting different regression types and residual fitting on the LCS measurement uncertainty. The ordinary least squared regression with fitted residuals and dynamic between reference analyser uncertainty rather than constant ones yielded more realistic LCS measurement uncertainty compared to other options. The MTD is a fast visual tool to extract several pieces of information on evaluation of any candidate method against reference method.publishedVersio
European Registry of Materials: global, unique identifiers for (undisclosed) nanomaterials
Get PDFManagement of nanomaterials and nanosafety data needs to operate under the FAIR (findability, accessibility, interoperability, and reusability) principles and this requires a unique, global identifier for each nanomaterial. Existing identifiers may not always be applicable or sufficient to definitively identify the specific nanomaterial used in a particular study, resulting in the use of textual descriptions in research project communications and reporting. To ensure that internal project documentation can later be linked to publicly released data and knowledge for the specific nanomaterials, or even to specific batches and variants of nanomaterials utilised in that project, a new identifier is proposed: the European Registry of Materials Identifier. We here describe the background to this new identifier, including FAIR interoperability as defined by FAIRSharing, identifiers.org, Bioregistry, and the CHEMINF ontology, and show how it complements other identifiers such as CAS numbers and the ongoing efforts to extend the InChI identifier to cover nanomaterials. We provide examples of its use in various H2020-funded nanosafety projects.publishedVersio
Revised local air quality assessment in Bergen
Get PDFTiltaksutredningen for lokal luftkvalitet i Bergen med handlings- og beredskapsplan skal bidra til at forurensningsnivået holder seg innenfor kravene i forurensningsforskriften. Tiltaksutredningen omfatter en kartlegging av luftkvaliteten i Bergen kommune ved trafikkberegninger og utslipps- og spredningsberegninger for PM10, PM2,5 og NO2 for Dagens situasjon 2019 og Referansesituasjonen 2030 med eksisterende og eventuelle nye tiltak. Utredningen vurderer effekten som tiltakene har for å overholde krav, men ser også på muligheten for ytterligere reduksjon i henhold til anbefalingene til helsemyndighetene. Basert på resultatene fra beregningene og i samarbeid med oppdragsgiver og referansegruppen, er det foreslått en revidert handlings- og beredskapsplan som skal behandles politisk.The air quality assessment for Bergen covers mapping of the air quality through traffic, emission and dispersion calculations of PM10, PM2,5 and NO2 for the present situation (2019) and future scenarios (2030) with existing and possible future measures. Based on the calculations and in coordination with Bergen municipality and the reference group, a plan for improved local air quality and a management plan for periods with high concentration levels is proposed for political processing.publishedVersio
The Emissions Fractions Approach to Assessing the Long-Range Transport Potential of Organic Chemicals
Get PDFThe assessment of long-range transport potential (LRTP) is enshrined in several frameworks for chemical regulation such as the Stockholm Convention. Screening for LRTP is commonly done with the OECD Pov and LRTP Screening Tool employing two metrics, characteristic travel distance (CTD) and transfer efficiency (TE). Here we introduce a set of three alternative metrics and implement them in the Tool’s model. Each metric is expressed as a fraction of the emissions in a source region. The three metrics quantify the extent to which the chemical (i) reaches a remote region (dispersion, ϕ1), (ii) is transferred to surface media in the remote region (transfer, ϕ2), and (iii) accumulates in these surface media (accumulation, ϕ3). In contrast to CTD and TE, the emissions fractions metrics can integrate transport via water and air, enabling comprehensive LRTP assessment. Furthermore, since there is a coherent relationship between the three metrics, the new approach provides quantitative mechanistic insight into different phenomena determining LRTP. Finally, the accumulation metric, ϕ3, allows assessment of LRTP in the context of the Stockholm Convention, where the ability of a chemical to elicit adverse effects in surface media is decisive. We conclude that the emission fractions approach has the potential to reduce the risk of false positives/negatives in LRTP assessments.publishedVersio