NILU Brage
Not a member yet
3619 research outputs found
Sort by
Feathers as integrated archives of environmental stress: Direct and indirect effects of metal exposure and dietary ecology on physiological stress in a terrestrial raptor
Get PDFMetal pollution is a global environmental issue with adverse biological effects on wildlife. Long-term studies that span declines in metal emissions due to regulation, resulting in varying levels of environmental contamination, are therefore well-suited to investigate effects of toxic metals, while also facilitating robust analysis by incorporating fluctuating environmental conditions and food availability. Here, we examined a resident population of tawny owls in Norway between 1986 and 2019. Tail feathers from females were collected annually, resulting in over 1000 feathers. Each feather served as an archive of local environmental conditions during molt, including the presence of metals, and their dietary ecology, proxied by stable isotopes of nitrogen (δ15N) and carbon (δ13C), as well as corticosterone levels (CORTf), the primary avian glucocorticoid and a measure of physiological stress. We analyzed feathers to examine how exposure to toxic metal(loid)s (Al, As, Cd, Hg, and Pb) and variability in dietary proxies modulate CORTf. Using structural equation modelling, we found that increased Al concentrations and δ15N values, linked directly to increased CORTf. In opposite, we found that increased Hg concentrations and δ13C related to decreased CORTf concentrations. δ15N was indirectly linked to CORTf through Al and Hg, while δ13C was indirectly linked to CORTf through Hg. This supports our hypothesis that metal exposure and dietary ecology may individually or jointly influence physiological stress. Notably, our results suggest that dietary ecology has the potential to mediate the impact of metals on CORTf, highlighting the importance of considering multiple variables, direct and indirect effects, when assessing stress in wildlife. In conclusion, feathers represent an excellent non-destructive biomonitoring strategy in avian wildlife, providing valuable insights not easily accessible using other methods. Further research is warranted to fully comprehend implications of alterations in CORTf on the tawny owl's health and fitness.publishedVersio
Transitioning to building integration of photovoltaics and greenery (BIPVGREEN): case studies up-scaling from cities informal settlements
Get PDFTo achieve the objectives of COP28 for transitioning away from fossil fuels and phasing these out, both natural and technological solutions are essential, necessitating a step-change in how we implement social innovation. Given the significant CO2 emissions produced by the building sector, there is an urgent need for a transformative shift towards a net-zero building stock by mid-century. This transition to zero-energy and zero-emission buildings is difficult due to complex processes and substantial costs. Building integrated photovoltaics (BIPV) offers a promising solution due to the benefits of enhanced energy efficiency and electricity production. The availability of roof and façade space in offices and other types of buildings, especially in large cities, permits photovoltaic integration in both opaque and transparent surfaces. This study investigates the synergistic relationship between solar conversion technologies and nature-based components. Through a meta-analysis of peer-reviewed literature and critical assessment, effective BIPVs with greenery (BIPVGREEN) combinations suitable for various climatic zones are identified. The results highlight the multi-faceted benefits of this integration across a range of techno-economic and social criteria and underscore the feasibility of up-scaling these solutions for broader deployment. Applying a SWOT analysis approach, the internal strengths and weaknesses, as well as the external opportunities and threats for BIPVGREEN deployment, are investigated. The analysis reveals key drivers of synergistic effects and multi-benefits, while also addressing the challenges associated with optimizing performance and reducing investment costs. The strengths of BIPVGREEN in terms of energy efficiency and sustainable decarbonization, along with its potential to mitigate urban and climate temperature increases, enhance its relevance to the built environment, especially for informal settlements. The significance of prioritizing this BIPVGREEN climate mitigation action in low-income vulnerable regions and informal settlements is crucial through the minimum tax financing worldwide and citizen's engagement in architectural BIPVGREEN co-integration
Overvåkning av langtransporterte atmosfæriske miljøgifter i luft og nedbør. Årsrapport 2023
No full textThis report presents air monitoring data from 2023 for the Norwegian monitoring programme "Atmospheric contaminants". The results covers 16 groups comprising of 260 organic compounds (regulated and non-regulated) as well as 14 heavy metals, and a selection of organic chemicals of concern.Denne rapporten inkluderer miljøovervåkningsdata fra 2023 for overvåkningsprogrammet Atmosfæriske miljøgifter. Resultatene omfatter 260 organiske miljøgifter (regulerte og ennå ikke regulerte), 14 tungmetaller og et utvalg organiske forbindelser som er av mulig bekymring for miljøet.publishedVersio
Fluorine Mass Balance, including Total Fluorine, Extractable Organic Fluorine, Oxidizable Precursors, and Target Per- and Polyfluoroalkyl Substances, in Pooled Human Serum from the Tromsø Population in 1986, 2007, and 2015
Get PDFOf the thousands of per- and polyfluoroalkyl substances (PFAS) known to exist, only a small fraction (≤1%) are commonly monitored in humans. This discrepancy has led to concerns that human exposure may be underestimated. Here, we address this problem by applying a comprehensive fluorine mass balance (FMB) approach, including total fluorine (TF), extractable organic fluorine (EOF), total oxidizable precursors (TOP), and selected target PFAS, to human serum samples collected over a period of 28 years (1986, 2007, and 2015) in Tromsø, Norway. While concentrations of TF did not change between sampling years, EOF was significantly higher in 1986 compared to 2007 and 2015. The ∑12PFAS concentrations were highest in 2007 compared to 1986 and 2015, and unidentified EOF (UEOF) decreased from 1986 (46%) to 2007 (10%) and then increased in 2015 (37%). While TF and EOF were not influenced by sex, women had higher UEOF compared to men, opposite to target PFAS. This is the first FMB in human serum to include TOP, and it suggests that precursors with >4 perfluorinated carbon atoms make a minor contribution to EOF (0–4%). Additional tools are therefore needed to identify substances contributing to the UEOF in human serum.publishedVersio
The atmospheric fate of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH): spatial patterns, seasonal variability, and deposition to Canadian coastal regions
Get PDFBrominated flame retardants (BFRs) that are gradually being phased out are being replaced by emerging BFRs. Here, we report the concentration of the α- and β-isomers of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH; also known as DBE-DBCH) in over 300 air, water, and precipitation samples collected between 2019 and 2022 using active air and deposition sampling as well as networks of passive air and water samplers. The sampling region includes Canada's most populated cities and areas along the St. Lawrence River and Estuary, Quebec, as well as around the Salish Sea, British Columbia. TBECH was detected in over 60 % of air samples at levels comparable to those of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47). Concentrations of TBECH and BDE-47 were typically higher in urban areas, with stronger correlations with population density during warmer deployments. Uniform α- β-TBECH ratios across space, time, and environmental media indicate the highly similar atmospheric fate of the two isomers. Although TBECH air concentrations were strongly related to temperature in urban Toronto and a remote site on the east coast, the lack of such dependence at a remote site on the west coast can be explained by the small seasonal temperature range and summertime air mass transport from the Pacific Ocean. Despite there being no evidence that TBECH has been produced, or imported for use, in Canada, it is now one of the most abundant gaseous BFRs in the Canadian atmosphere. The recorded spatial and temporal variability of TBECH suggest that its emissions are not constrained to specific locations but are generally tied to the presence of humans. The most likely explanation for its environmental occurrence in Canada is the release from imported consumer products containing TBECH. Chiral analysis suggests that despite its urban origin, at least some fraction of TBECH has experienced enantioselective processing, i.e., has volatilized from reservoirs where it has undergone microbial transformations. Microbial processes in urban soils and in marine waters may have divergent enantioselectivity.publishedVersio
Estimating methane emissions in the Arctic nations using surface observations from 2008 to 2019
Get PDFThe Arctic is a critical region in terms of global warming. Environmental changes are already progressing steadily in high northern latitudes, whereby, among other effects, a high potential for enhanced methane (CH4) emissions is induced. With CH4 being a potent greenhouse gas, additional emissions from Arctic regions may intensify global warming in the future through positive feedback. Various natural and anthropogenic sources are currently contributing to the Arctic's CH4 budget; however, the quantification of those emissions remains challenging. Assessing the amount of CH4 emissions in the Arctic and their contribution to the global budget still remains challenging. On the one hand, this is due to the difficulties in carrying out accurate measurements in such remote areas. Besides, large variations in the spatial distribution of methane sources and a poor understanding of the effects of ongoing changes in carbon decomposition, vegetation and hydrology also complicate the assessment. Therefore, the aim of this work is to reduce uncertainties in current bottom-up estimates of CH4 emissions as well as soil oxidation by implementing an inverse modelling approach in order to better quantify CH4 sources and sinks for the most recent years (2008 to 2019). More precisely, the objective is to detect occurring trends in the CH4 emissions and potential changes in seasonal emission patterns. The implementation of the inversion included footprint simulations obtained with the atmospheric transport model FLEXPART (FLEXible PARTicle dispersion model), various emission estimates from inventories and land surface models, and data on atmospheric CH4 concentrations from 41 surface observation sites in the Arctic nations. The results of the inversion showed that the majority of the CH4 sources currently present in high northern latitudes are poorly constrained by the existing observation network. Therefore, conclusions on trends and changes in the seasonal cycle could not be obtained for the corresponding CH4 sectors. Only CH4 fluxes from wetlands are adequately constrained, predominantly in North America. Within the period under study, wetland emissions show a slight negative trend in North America and a slight positive trend in East Eurasia. Overall, the estimated CH4 emissions are lower compared to the bottom-up estimates but higher than similar results from global inversions.publishedVersio
PM2.5 Retrieval Using Aerosol Optical Depth, Meteorological Variables, and Artificial Intelligence
Get PDFParticulate matter (PM) is one of the major air pollutants that has adverse impacts on human health. The aim of this study is to present an alternative approach for retrieving fine PM (particles with an aerodynamic diameter less than 2.5 μm, PM2.5) using artificial intelligence. Ground-based instruments, including a hand-held Microtops II sun photometer (for aerosol optical depth), a PurpleAir sensor (for PM2.5), and Rotronic sensors (for temperature and relative humidity), are used for the machine learning algorithm training. The retrieved PM2.5 reveals an adequate performance with an error of 0.08 μg m−3 and a Pearson correlation coefficient of 0.84.publishedVersio
Dust emissions and dispersion from LKAB, Narvik
Get PDFDenne rapporten presenterer spredningsberegninger som estimerer LKAB sitt bidrag til forurensningssituasjonen i Narvik. Spredningsberegningene er basert på et anslag for det samlede støvutslippet fra både punktkilder og diffuse kilder via målt støvavsetning rundt anlegget. Spredningsberegningene som er utført med partikkelmodellen Flexpart-WRF, viser ingen overskridelse av grenseverdiene for PM10 eller PM2,5 utenfor LKABs industriområde.The report presents atmospheric dispersion calculations to estimate LKABs contribution to the air pollution situation in Narvik. The dispersion calculations are based on an estimate of the total emission of particles from both point sources and diffuse sources via measured deposition around the site. The dispersion calculations are performed with the particle model Flexpart-WRF, and shows no exceedances of limit values for PM10 or PM2.5 outside the LKAB industry site.publishedVersio
Rapid identification of in vitro cell toxicity using an electrochemical membrane screening platform
Get PDFThis study compares the performance and output of an electrochemical phospholipid membrane platform against respective in vitro cell-based toxicity testing methods using three toxicants of different biological action (chlorpromazine (CPZ), colchicine (COL) and methyl methanesulphonate (MMS)). Human cell lines from seven different tissues (lung, liver, kidney, placenta, intestine, immune system) were used to validate this physicochemical testing system. For the cell-based systems, the effective concentration at 50 % cell death (EC50) values are calculated. For the membrane sensor, a limit of detection (LoD) value was extracted as a quantitative parameter describing the minimum concentration of toxicant which significantly affects the structure of the phospholipid sensor membrane layer. LoD values were found to align well with the EC50 values when acute cell viability was used as an end-point and showed a similar toxicity ranking of the tested toxicants. Using the colony forming efficiency (CFE) or DNA damage as end-point, a different order of toxicity ranking was observed. The results of this study showed that the electrochemical membrane sensor generates a parameter relating to biomembrane damage, which is the predominant factor in decreasing cell viability when in vitro models are acutely exposed to toxicants. These results lead the way to using electrochemical membrane-based sensors for rapid relevant preliminary toxicity screens.publishedVersio