25353 research outputs found
Sort by
The effect of echoes interference on phonon attenuation in a nanophononic membrane
No full textInternational audienceAbstract Nanophononic materials are characterized by a periodic nanostructuration, which may lead to coherent scattering of phonons, enabling interference and resulting in modified phonon dispersions. We have used the extreme ultraviolet transient grating technique to measure phonon frequencies and lifetimes in a low-roughness nanoporous phononic membrane of SiN at wavelengths between 50 and 100 nm, comparable to the nanostructure lengthscale. Surprisingly, phonon frequencies are only slightly modified upon nanostructuration, while phonon lifetime is strongly reduced. Finite element calculations indicate that this is due to coherent phonon interference, which becomes dominant for wavelengths between ~ half and twice the inter-pores distance. Despite this, vibrational energy transport is ensured through an energy flow among the coherent modes created by reflections. This interference of phonon echos from periodic interfaces is likely another aspect of the mutual coherence effects recently highlighted in amorphous and complex crystalline materials and, in this context, could be used to tailor transport properties of nanostructured materials
Ytterbium-stabilized alkyl palladium(IV) complexes: synthesis and reactivity studies
No full textNational audienc
Simulating Ips typographus L. outbreak dynamics and their influence on carbon balance estimates with ORCHIDEE r8627
No full textInternational audienceNew (a)biotic conditions resulting from climate change are expected to change disturbance dynamics, such as windthrow, forest fires, droughts, and insect outbreaks, and their interactions. These unprecedented natural disturbance dynamics might alter the capability of forest ecosystems to buffer atmospheric CO2 increases, potentially leading forests to transform from sinks into sources of CO2. This study aims to enhance the ORCHIDEE land surface model to study the impacts of climate change on the dynamics of the bark beetle, Ips typographus, and subsequent effects on forest functioning. The Ips typographus outbreak model is inspired by previous work from Temperli et al. (2013) for the LandClim landscape model. The new implementation of this model in ORCHIDEE r8627 accounts for key differences between ORCHIDEE and LandClim: (1) the coarser spatial resolution of ORCHIDEE; (2) the higher temporal resolution of ORCHIDEE; and (3) the pre-existing process representation of windthrow, drought, and forest structure in ORCHIDEE. Simulation experiments demonstrated the capability of ORCHIDEE to simulate a variety of post-disturbance forest dynamics observed in empirical studies. Through an array of simulation experiments across various climatic conditions and windthrow intensities, the model was tested for its sensitivity to climate, initial disturbance, and selected parameter values. The results of these tests indicated that with a single set of parameters, ORCHIDEE outputs spanned the range of observed dynamics. Additional tests highlighted the substantial impact of incorporating Ips typographus outbreaks on carbon dynamics. Notably, the study revealed that modeling abrupt mortality events as opposed to a continuous mortality framework provides new insights into the short-term carbon sequestration potential of forests under disturbance regimes by showing that the continuous mortality framework tends to overestimate the carbon sink capacity of forests in the 20- to 50-year range in ecosystems under high disturbance pressure compared to scenarios with abrupt mortality events. This model enhancement underscores the critical need to include disturbance dynamics in land surface models to refine predictions of forest carbon dynamics in a changing climate
Ink-Edit: Interactive color-constrained textures editing
No full textInternational audienceProcedural textures are able to generate large and detailed textures on-demand, at rendering time, with minimal memory usage. They are defined by parallel algorithms, which are easily integrated into modern graphics hardware. As a drawback, they may be difficult to control, namely in an interactive and user-friendly manner. In this paper, we define an interactive tool to control the parameters of the procedural model introduced by Grenier et al. [Grenier et al. 2022], which is based on a noise vector field (Figure 1 (a), bottom and middle), and a color map (Figure 1 (a), top). In our interactive tool, the noise is controlled through a small set of parameters in the spectral domain. To control the color map, the user first prescribes the colors (inks) and their proportions (ink volumes in the final result), and then adjusts interactively the adjacency between colors. This is done through a new constrained optimal transport point of view: the colors in the map are regarded as cells of a weighted Voronoi diagram, and the noise distribution is regarded as a probability measure. The ink volumes are automatically enforced as hard constraints of an optimization process during the interactive session, while the user focuses on high-level control over the adjacency of the colors
Transient gradient nanosecond plasmas for the initiation of a detonation wave: plasma characterisation with OES and O-TALIF
No full textInternational audienc
Nitrogen atoms ps-TALIF in atmospheric pressure nanosecond volume DBD plasma
No full textInternational audienc
Opposite Trends in the Northern Hemisphere Stratosphere Between Mid‐Winter and Early Spring Linked to Surface Temperature Anomalies
No full textInternational audienceTrends in the coupled stratosphere‐troposphere system during the 1979–2022 period are investigated in the Northern Hemisphere using reanalysis datasets. More upward planetary wave propagation in December is shown to precede the deceleration of the stratospheric polar vortex in January. This deceleration prevents the waves from continuing to propagate upward in February and favors an acceleration of the stratospheric polar vortex in March. This is associated with an increased Northern Hemisphere annular mode in March in the stratosphere and the troposphere. Trends show a moderate significance level because of strong interannual variability. Recent seasons whose anomalies project onto the trends are those for which wave‐1 anomaly constructively interferes with wave‐1 climatology in December, which occurs when there is warming in an area extending from Eastern Canada to Greenland and slight cooling over Eurasia. It shows the potential for predicting the springtime stratospheric polar vortex from wintertime wave‐1 anomalies
Linear viscoelasticity of anisotropic carbon fibers reinforced thermoplastics: from micromechanics to dynamic torsion experiments
No full textInternational audienceThe link between experimental characterization and the constitutive behavior of an anisotropic linear viscoelastic unidirectional carbon fiber-reinforced thermoplastic composite is explored using micromechanics modeling. Dynamic torsion tests were conducted at 1 Hz over a wide temperature range, from the glassy to the rubbery states of the polymeric matrix, on both the pure matrix and the composite, for various cutting angles relative to the fibers. A two-step modeling procedure in the frequency domain is presented to predict and validate the effective behavior of the composite. The first step involves FFT-based homogenization, which maps the microstructure and constituent behaviors to effective transversely isotropic viscoelastic properties. The second step consists of finite element simulations using the effective behavior calculated from homogenization as input to replicate the experiments. A comparison between experimental results and model predictions across the entire temperature range is performed. The modeling predictions show good accuracy at low temperatures, where the matrix is in the glassy state. At high temperatures, where the matrix is in the rubbery state, the predicted behavior becomes too soft. As the phase contrast increases and the ratio of matrix bulk modulus to shear modulus rises significantly, the impact of fiber arrangement on the effective properties becomes more pronounced.</div
Slot‐Die Deposition of CuSCN Using Asymmetric Alkyl Sulfides as Cosolvent for Low‐Cost and Fully Scalable Perovskite Solar Cell Fabrication
No full textInternational audienceThe development of industrially relevant deposition processes for efficient, stable, and inexpensive charge extracting layers is crucial for the commercialization of perovskite solar cells (PSCs). This work demonstrates, for the first time, the deposition of copper thiocyanate (CuSCN) as a low‐cost and reliable hole‐transport layer using slot‐die coating. Methyl ethyl sulfide is thereby used as an asymmetric cosolvent to significantly increase the solubility of CuSCN in the utilized slot‐die ink compared to traditional pure diethyl sulfide‐based solutions. Optimized CuSCN inks allow for the deposition of CuSCN layers on 5 × 10 cm 2 substrates with a wide range of thicknesses. Multidimensional imaging photoluminescence techniques are used to investigate the uniformity of the CuSCN thin films deposition as well as the influence of the solvent on charge losses. Finally, the CuSCN slot‐die deposition is integrated into a fully upscalable PSC fabrication process showing 19.1% power conversion efficiency for small laboratory cells and 14.7% for 9 cm 2 minimodules. Furthermore, semitransparent minimodules retain 80% of their initial efficiency after 500 h of constant illumination
Doping-dependent charge- and spin-density wave orderings in a monolayer of Pb adatoms on Si(111)
No full textInternational audienceAbstract In this work we computed the phase diagram as a function of temperature and doping for a system of lead adatoms allocated periodically on a silicon (111) surface. This Si(111):Pb material is characterized by a strong and long-ranged Coulomb interaction, a relatively large value of the spin-orbit coupling, and a structural phase transition that occurs at low temperature. In order to describe the collective electronic behavior in the system, we perform many-body calculations consistently taking all these important features into account. We find that charge- and spin-density wave orderings coexist with each other in several regions of the phase diagram. This result is in agreement with the recent experimental observation of a chiral spin texture in the charge density wave phase in this material. We also find that the geometries of the charge and spin textures strongly depend on the doping level. The formation of such a rich phase diagram in the Si(111):Pb material can be explained by a combined effect of the lattice distortion and electronic correlations