Journal of Applied Materials and Technology
Not a member yet
73 research outputs found
Sort by
Global Research Performance on the Design and Applications of Type-2 Fuzzy Logic Systems: A Bibliometric Analysis
Get PDFThere has been a significant contribution to scientific literature in the design and applications of Type-2 fuzzy logic systems (T2FLS). The T2FLSs found applications in many aspects of our daily lives, such as engineering, pure science, medicine and social sciences. The online web of science was searched to identify the 100 most frequently cited papers published on the design and application of T2FLS from 1980 to 2016. The articles were analyzed based on authorship, source title, country of origin, institution, document type, web of science category, and year of publication. The correlation between the average citation per year (ACY) and the total citation (TC) was analyzed. It was found that there is a strong relationship between the ACY and TC (r = 0.91643, P<0.01), based on the papers consider in this research. The “Type -2 fuzzy sets made simple” authored by Mendel and John (2002), published in IEEE Transactions on Fuzzy Systems received the highest TC as well as the ACY. The future trend in this research domain was also analyzed. The present analysis may serve as a guide for selecting qualitative literature especially to the beginners in the field of T2FLS
Simultaneous Distribution Network Reconfiguration and Optimal Placement of Distributed Generation
Get PDFA reliable, eco- and nature-friendly operation has been the major concern of modern power system (PS). To improve the PS reliability and reduce the adverse environmental effect of conventional thermal generation facilities, renewable energy based distributed generation (RDG) are being enormously integrated to low and medium voltage distribution networks (DN). However, if these systems are not properly deployed, the reliability and stability of the PS will be endangered and its quality can be dreadfully jeopardized. Among the measures taken to avoid such is optimizing the location and size of each RDG unit in the DNs. These networks are generally operated in a radial configuration, though they can be reconfigured to other topologies to achieve certain objectives. Both RDG placement/sizing and DN reconfiguration are highly non-linear, multi-objective, constrained and combinatorial optimization problems. In this study, a hybrid of Particle Swarm Optimization (PSO) and real-coded Genetic Algorithm (GA) techniques is employed for DN reconfiguration and optimal allocation (size and location) of multiple RDG units in primary DNs simultaneously. The objectives of the proposed technique are active power loss reduction, voltage profile (VP) and feeder load balancing (LB) improvement. It is carried out subject to some technical constraints, with the search space being the set of DN branches, DG sizes and potential locations. To ascertain the effectiveness of the technique, it is implemented on standard IEEE 16-bus, 33-bus and 69-bus test DNs. The proposed algorithm is implemented in MATLAB and MATPOWER environments. It is observed the power loss, voltage deviation and LB are found to be reduced by 32.84%, 12.33% and 24.03% of their respective inherent values in the biggest system when the system is reconfigured only. With the optimized RDGs placed in the reconfigured systems, a further reductions of 46.27%, 25.92% and 36.65% are observed respectively.
 
Physical and Chemical Characteristics of Feed Coal and its by-products from a Brazilian Thermoelectric Power Plant
Get PDFoai:ojs2.jamt.ejournal.unri.ac.id:article/1In this study, feed coal (FC) from the Figueira Thermoelectric Power Plant (FTPP), located in the state of Paraná (PR), Brazil was characterized by X-ray fluorescence (XRF), X-ray diffractometry (XRD), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), particle size distribution analysis by laser diffraction, loss of ignition (LOI), total carbon content (TC), pH and conductivity. FC-derived by-products (CCBs) collected at the FTPP were: bottom ash (BA), fly ash from cyclone filter (CA) and fly ash from bag filter (FA). In addition to the techniques used for feed coal characterization, CCBs were also characterized by total surface area (by using BET method), external surface area (by using laser diffraction), cation exchange capacity (CEC), bulk density, besides leaching and solubilization tests. FC sample contains 72.2% of volatile material, of which 55.3% is total carbon content. LOI, FTIR, TGA and TC analyzes corroborated with these results. The main crystalline phases in the FC sample were found to be quartz, kaolinite and pyrite. The elements As, Cr, Ni and Pb were encountered in the FC sample, indicating that the use of FTPP feed coal should be monitored due to the toxic potential of these elements. The three coal ashes were classified as class F according to ASTM and presented similar chemical composition, with total content of the main oxides (SiO2, Al2O3 and Fe2O3) above 72%. Ashes enrichment factor analysis (EF) showed that As, Zn and Pb concentrate mainly in fly ash from bag filter (FA), whereas the elements K and Mg presented higher enrichment in the bottom ash (BA) . All ashes presented quartz, mullite and magnetite as crystalline phases, as well as the same functional groups, related to the presence of humidity, organic matter and Si and Al compounds. XRD, XRF, TGA, FTIR, LOI and TC techniques were correlated and confirmed the obtained results. Total and external surface area values of CCBs were related to the total carbon content (TC), as well as to the results of particle size distribution and the scanning electron micrographs of the samples. On the other hand the CEC of the ashes showed relation with the particle size distribution and with the external surface area. Leaching and solubilization tests of CCBs showed that FA sample was considered hazardous and classified as class I waste, while CA and BA samples were considered non-hazardous and non-inert wastes and classified as class II-A. FA sample from Figueira power plant must be discarded only after treatment or a stringent disposal criterion must be followed to avoid contamination on site. In this work, feed coal sample was also compared to the CCBs samples generated from it. The results showed the differences between fuel and products through the different characterization techniques. In addition to contributing to the understanding of the relationship between coal and its combustion products, this work can also help to reduce the environmental impacts caused by the CCBs disposal, as well as can also be used to compare the characteristics of CCBs from FTPP with the new wastes that will be generated by the same thermal power plant that will be soon modernized