HAL-OBSPM
Not a member yet
37663 research outputs found
Sort by
Euclid. II. The VIS Instrument
No full textInternational audienceThis paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information
Acoustic Positioning for Deep Sea Neutrino Telescopes with a System of Piezo Sensors Integrated into Glass Spheres
No full textInternational audiencePosition calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infrastructure. The ANTARES neutrino telescope operated from 2006 until 2022 in the Mediterranean Sea at a depth exceeding 2000m. It comprised nearly 900 glass spheres with 432mm diameter and 15mm thickness, equipped with photomultiplier tubes to detect Cherenkov light from tracks of charged elementary particles. In an experimental setup within ANTARES, piezo sensors have been glued to the inside of such - otherwise empty - glass spheres. These sensors recorded signals from acoustic emitters with frequencies from 46545 to 60235Hz. Two waves propagating through the glass sphere are found as a result of the excitation by the waves in the water. These can be qualitatively associated with symmetric and asymmetric Lamb-like waves of zeroth order: a fast (early) one with mm/s and a slow (late) one with mm/s. Taking these findings into account improves the accuracy of the position calibration. The results can be transferred to the KM3NeT neutrino telescope, currently under construction at multiple sites in the Mediterranean Sea, for which the concept of piezo sensors glued to the inside of glass spheres has been adapted for monitoring the positions of the photomultiplier tubes
A misleading naming convention: de Sitter `tachyonic' scalar fields
No full textInternational audienceWe revisit the so-called `tachyonic' scalar fields in de Sitter (dS) spacetime. Through a rigorous group-theoretical analysis, we argue that labeling these fields as `tachyonic' lacks physical relevance, frequently resulting in misinterpretations in scholarly discourse, such as the misconception of faster-than-light travel associated with the corresponding particles
Euclid: Searches for strong gravitational lenses using convolutional neural nets in Early Release Observations of the Perseus field
No full textInternational audienceThe Euclid Wide Survey (EWS) is predicted to find approximately 170 000 galaxy-galaxy strong lenses from its lifetime observation of 14 000 deg^2 of the sky. Detecting this many lenses by visual inspection with professional astronomers and citizen scientists alone is infeasible. Machine learning algorithms, particularly convolutional neural networks (CNNs), have been used as an automated method of detecting strong lenses, and have proven fruitful in finding galaxy-galaxy strong lens candidates. We identify the major challenge to be the automatic detection of galaxy-galaxy strong lenses while simultaneously maintaining a low false positive rate. One aim of this research is to have a quantified starting point on the achieved purity and completeness with our current version of CNN-based detection pipelines for the VIS images of EWS. We select all sources with VIS IE < 23 mag from the Euclid Early Release Observation imaging of the Perseus field. We apply a range of CNN architectures to detect strong lenses in these cutouts. All our networks perform extremely well on simulated data sets and their respective validation sets. However, when applied to real Euclid imaging, the highest lens purity is just 11%. Among all our networks, the false positives are typically identifiable by human volunteers as, for example, spiral galaxies, multiple sources, and artefacts, implying that improvements are still possible, perhaps via a second, more interpretable lens selection filtering stage. There is currently no alternative to human classification of CNN-selected lens candidates. Given the expected 10^5 lensing systems in Euclid, this implies 10^6 objects for human classification, which while very large is not in principle intractable and not without precedent
Homogeneous Linewidth Behaviour of Narrow Optical Emitters at Sub-kelvin Temperatures
No full textInternational audienceWe explore the properties of ultra-narrow spectral holes in ensembles of solid-state emitters in crystals over a range of sub-kelvin temperatures, with a focus on their potential application in frequency stabilization schemes as an alternative to ultrastable cavities. We investigate how the parameters used to burn the spectral hole impact its shape, and how these factors determine the minimum achievable linewidth. In addition to the stability of the hole's center frequency, the linewidth and contrast play a crucial role in frequency locking. At sub-kelvin temperatures, the temperaturedependent T^7 broadening from two-phonon Raman scattering is expected to be negligible, and the spectral hole's linewidth should therefore remain constant in this interval. We observe however a linear broadening with increasing temperature, highlighting the need for further investigation into the mechanisms governing the linewidth at ultra-low temperatures
Probing the Galactic neutrino flux at neutrino energies above 200 TeV with the Baikal Gigaton Volume Detector
No full textInternational audienceRecent observations of the Galactic component of the high-energy neutrino flux, together with the detection of the diffuse Galactic gamma-ray emission up to sub-PeV energies, open new possibilities to study the acceleration and propagation of cosmic rays in the Milky Way. At the same time, both large non-astrophysical backgrounds at TeV energies and scarcity of neutrino events in the sub-PeV band currently limit these analyses. Here we use the sample of cascade events with estimated neutrino energies above 200 TeV, detected by the partially deployed Baikal Gigaton Volume Detector (GVD) in six years of operation, to test the continuation of the Galactic neutrino spectrum to sub-PeV energies. We find that the distribution of the arrival directions of Baikal-GVD cascades above 200 TeV in the sky suggests an excess of neutrinos from low Galactic latitudes. We find the excess above 200 TeV also in the most recent IceCube public data sets, both of cascades and tracks. The significant (3.6 sigma in the combined analysis) flux of Galactic neutrinos above 200 TeV challenges often-used templates for neutrino search based on cosmic-ray simulations
PySCo: A fast Particle-Mesh -body code for modified gravity simulations in Python
No full textInternational audienceWe present PySCo, a fast and user-friendly Python library designed to run cosmological -body simulations across various cosmological models, such as CDM and CDM, and alternative theories of gravity, including , MOND and time-dependent gravitational constant parameterisations. PySCo employs Particle-Mesh solvers, using multigrid or Fast Fourier Transform (FFT) methods in their different variations. Additionally, PySCo can be easily integrated as an external library, providing utilities for particle and mesh computations. The library offers key features, including an initial condition generator based on up to third-order Lagrangian Perturbation Theory (LPT), power spectrum estimation, and computes the background and growth of density perturbations. In this paper, we detail PySCo's architecture and algorithms and conduct extensive comparisons with other codes and numerical methods. Our analysis shows that, with sufficient small-scale resolution, the power spectrum at redshift remains independent of the initial redshift at the 0.1% level for 125, 30, and 10 when using first, second, and third-order LPT, respectively. Although the seven-point Laplacian method used in multigrid also leads to power suppression on small scales, this effect can largely be mitigated when computing ratios. In terms of performance, PySCo only requires approximately one CPU hour to complete a Newtonian simulation with particles (and an equal number of cells) on a laptop. Due to its speed and ease of use, PySCo is ideal for rapidly generating vast ensemble of simulations and exploring parameter spaces, allowing variations in gravity theories, dark energy models, and numerical approaches. This versatility makes PySCo a valuable tool for producing emulators, covariance matrices, or training datasets for machine learning
Connecting Gravitational Perturbations: from Bertotti-Robinson to Extreme Reissner-Nordstrom
No full textInternational audienceWe study spherically symmetric spacetime perturbations induced by a neutral scalar in the near-horizon region of extreme Reissner-Nordstrom black holes. For the unperturbed black hole, the near-horizon region is given by another exact solution of the Einstein-Maxwell equations, namely the Bertotti-Robinson spacetime. Our aim is to extend this connection beyond the background level and identify perturbations of a Bertotti-Robinson spacetime as near-horizon perturbations of an extreme Reissner-Nordstrom black hole. We explain that explicit identification of the perturbative solutions to the two different backgrounds can only work in appropriate gauges. For this reason, we first solve the two perturbation problems in the most general spherically symmetric gauges and then find the necessary gauge conditions for matching the Reissner-Nordstrom and Bertotti-Robinson perturbative solutions in the near-horizon limit
Characterization and classification of -ray bursts from blazars
No full textInternational audienceBlazars are the most common sources of -ray photons in the extra-galactic sky. Their -ray light-curves are characterized by bright flaring episodes, similarly to what is observed at longer wavelengths. These Gamma-Ray Bursts from Blazars (GRBBLs) have been extensively studied individually, but never in terms of a population. The goal of this work is to provide a global characterization of GRBBLs, to investigate the parameter space of the population, and ultimately to classify GRBBLs. Their global properties could give insights on the physical mechanisms responsible for the -ray radiation and on the origin of the observed variability. I analyze a sample of publicly available Fermi-LAT light-curves, utilizing only blazars with certain redshift measurements. The redshift-corrected light-curves are then automatically scanned to identify GRBBLs. A simple flare profile, with exponential rise and decay, is then fitted to all events. The fit parameters, together with global properties from the LAT catalog, are then used as input for unsupervised machine learning classification. The analysis shows that the GRBBL population is remarkably homogeneous. When using only the properties of the integral light-curves, the classifier converges into a single population. When adding information on the evolution of the photon index, the classifier splits the population into achromatic (the large majority) and chromatic (the outliers) GRBBLs. As by product of this study, I identify a correlation between the rising/decay time-scales of the GRBBLs and their peak luminosity
Multi-messenger signature of cosmic rays from the microquasar V4641 Sgr propagating along a Galactic Magnetic Field line
No full textInternational audienceThe recently detected extended, very-high-energy gamma-ray emission from the microquasar V4641 Sgr reveals a puzzling 200-parsec-long jet-like structure significantly misaligned with its radio jet. We propose that this gamma-ray structure is produced by high-energy cosmic-ray particles escaping from the microquasar along ordered field lines of the Galactic Magnetic Field and interacting with the interstellar medium. We show that if the gamma-ray emission is produced by interactions of high-energy cosmic ray nuclei, the system is detectable by future multi-km3 neutrino detectors. We argue that gamma-ray observations of jet-like features adjacent to high-energy sources in the Milky Way provide a new method to measure the regular and turbulent components of the Galactic magnetic field at different locations in the Milky Way