550909 research outputs found
Sort by
Decorrelation Stretches (DCS) of Visible Images as a Tool for Sedimentary Provenance Investigations on Earth and Mars
Get PDFThe surface of Mars exhibits vast expanses of mafic sediments and ancient sedimentary rocks that record signals of climate and environment. To decipher the paleoenvironments, the sediment sources and transport histories must be con-strained, but it is not well known how physical fractionation and aqueous alteration affect mafic sediments during glacial, eolian, and fluvial processes. Semi-Autonomous Navigation for Detrital Environments (SAND-E), a NASA Planetary Science and Technology through Analog Research (PSTAR) project, bridges this gap through studies of sediment-grain properties and mineralogy in the glacio-XRD)-derived mineralogies
Isotopic and Microstructural Analyses of Opaque Mineral Assemblages and Their Alteration Products Hosted in a Refractory Inclusion
Get PDFCalcium-aluminum-rich inclusions (CAIs) hosted in primitive meteorites are the oldest solids formed in the Solar System. Some CAIs contain metal nuggets that are complex assemblages of Fe-Ni alloys, along with rare ultra-refractory metals such as platinum group elements (PGEs), and their alteration products such as magnetite, sulfides, and phosphates. Three possible mechanisms proposed to explain the origin of these metal nuggets include condensation in circumstellar settings, condensation in the solar nebula within the CAI-forming region, or crystallization from immiscible metal-silicate melt. However, secondary alteration processes may have also affected some of these assemblages. Additionally, similar metal assemblages observed in chondrules and chondritic matrix indicate that all of these metal nuggets could share common high-temperature origins. These metal assemblages record early Solar System conditions that are reflected in their distinctive chemical composition, mineralogy and microstructures. Here we report a detailed mineralogical, microstructural and oxygen isotopic study of one such metal assemblage hosted in a CAI to understand the physical and chemical settings in which it formed
Applicability and Utility of the Astromaterials X-Ray Computed Tomography Laboratory at Johnson Space Center
Get PDFThe Astromaterials Acquisition and Curation Office at NASAs Johnson Space Center is responsible for curating all of NASAs astromaterial sample collections (i.e. Apollo samples, Luna Samples, Antarctic Meteorites, Cosmic Dust Particles, Microparticle Impact Collection, Genesis solar wind atoms, Stardust comet Wild-2 particles, Stardust interstellar particles, and Hayabusa asteroid Itokawa particles) [1-3]. To assist in sample curation and distribution, JSC Curation has recently installed an X-ray computed tomography (XCT) scanner to visualize and characterize samples in 3D. [3] describes the instrumental set-up and the utility of XCT to astromaterials curation. Here we describe some of the current and future projects and illustrate the usefulness of XCT in studying astromaterials
Commercial Supersonic Noise Considerations: Business/Economics Addressing Barriers to Future Air Travel
Get PDFThis presentation gives an overview of NASA's exploratory Landing and Take-Off noise analyses supporting commercial supersonic technology developments. A very brief business and economics discussion is also put forth, describing city pair market and the Value of Time metric for setting ticket price and market seat capture
Human Mars Entry, Descent, and Landing Architecture Study: Phase 3 Summary
Get PDFOver the past four years, NASA has directed the Entry, Descent and Landing Architecture Study (EDLAS) to evaluate candidate technologies to deliver human-scale vehicles (carrying 20t payloads) to the surface of Mars. The study focused on two vehicles in Phase 3 (during 2018 and 2019), one low and one mid lift-to-drag (L/D) vehicle. This paper summarizes updates to the structural and aeroshell outer mold line design for the mid-L/D Mars entry lander vehicle that occurred during EDLAS Phase 3. The design efforts used parametric optimization to arrive at a solution for total vehicle primary and secondary structure mass, and vehicle center-of-gravity location. Additionally, the end of Phase 2 provided an updated surface payload manifest that required three 22 t landers. This paper also summarizes the results of the packaging feasibility study of the updated payload configurations for those three reference missions. The study verified an arrangement of the payload elements within the mid-L/D vehicle that satisfied the center of gravity location limitations for flight
Resources from Water-Rock Interactions for Future Human Exploration of Mars
Get PDFOne of the most exciting endeavors in modern space exploration is extended human exploration of the Moon and Mars. We have entered a new phase in the human venture where we seek to expand our "...presence deeper into space and to the Moon for sustainable long-term exploration and utilization". With this endeavor come new challenges. Among them is the requirement for In Situ Resource Utilization (ISRU) methods to supplement or replace materials transported from Earth. The energy required to leave Earth's gravity well is immense, as is well illustrated by the nearly 3000 metric ton Saturn V required to deliver a payload of less than 50 metric tons to the Moon during the Apollo era. Much of this mass is propellant. Launch vehicles from Earth into space are generally 85 to 95% propellant (oxidizer + fuel) by mass. Potential ascent vehicles from Mars would also need to be approximately 80% propellant by mass to return to Earth. ISRU of fuel reactants could exchange delivered fuel mass directly for payload mass on the order of several metric tons. Devices like MOXIE are being designed to address the oxidizer component. However, 40% of the propellant mass in an ascent vehicle is the fuel reactant, and ISRU of this component has not been addressed for Mars or the Moon. Toward addressing this need, we have begun to develop and optimize methods to generate and recover fuel components, including H2, from Lunar and Martian relevant materials as potential in situ resources for future extended human missions. Hydrogen is an ideal resource to target. Not only can H2 be used directly as part of a propellant, it can also be used as a component in other fuels, such as methane. It is useful agriculturally for fixing nitrogen and can be oxidized to produce heat and water
Shock Deformation in Zircon, a Comparison of Results from Shock-Reverberation and Single-Shock Experiments
Get PDFThe utility of the mineral zircon, ZrSiO4, as a shock-metamorphic geobarometer and geochronometer, has been steadily growing within the planetary science community. Zircon is an accessory phase found in many terrestrial rock types, lunar samples, lunar meteorites, martian meteorites and various other achondrites. Because zircon is refractory and has a high closure temperature for Pb diffusion, it has been used to determine the ages of some of the oldest material on Earth and elsewhere in the Solar System. Furthermore, major (O) and trace-element (REE, Ti, Hf) abundances and isotope compositions of zircon help characterize the petrogenetic environments and sources from which they crystallized. The response of zircon to impact-induced shock deformation is predominantly crystallographic, including dislocation creep and the formation of planar and sub-planar, low-angle grain boundaries; the formation of mechanical {112} twins; transformation to the high pressure polymorph reidite; the development of polycrystalline microtextures; and dissociation to the oxide constituents SiO2 and ZrO2. Shock microstructures can also variably affect the U- Pb isotope systematics of zircon and, in some instances, be used to constrain the impact age. While numerous studies have characterized shock deformation in zircon recovered from a variety of terrestrial impact craters and ejecta deposits and Apollo samples, experimental studies of shock deformation in zircon are limited to a handful of examples in the literature. In addition, the formation conditions (e.g., P, T) of various shock microstructures, such as planar-deformation bands, twins, and reidite lamellae, remain poorly con-strained. Furthermore, previous shocked-zircon experimental charges have not been analyzed using modern analytical equipment. This study will therefore under-take an new set of zircon shock experiments, which will then be microstructurally characterized using state-of-the-art instrumentation within the Astromaterials Research and Exploration Science Division (ARES), NASA Johnson Space Center
A Fresh Look at the Stratigraphy of Northern Australe
Get PDFThe roughly circular collection of mare deposits centered at ~38.9S, 93E is often re- ferred to as Mare Australe. It is located outside of the Procellarum KREEP Terrain. The circular arrangement of Australes mare patches has suggested an ancient, heavily degraded or relaxed impact basin roughly 900 km in diameter. The mare deposits are generally thought to have erupted into smaller post- basin craters. The type, volume, and distribution of mare eruptions potentially resembles the early stages of basin-filling mare events, but which are preserved in Australe and some farside locations. Gravity data suggest that if there was a basin, it is much smaller than originally proposed (now ~600 km) and located in the northern part of Mare Australe, between Humboldt, Milne, and Jenner craters. As a whole, Mare Australe lacks the topography typically associated with a basin; however, northern Australe has a slight topographic depression that roughly corresponds to the basin-like Bouguer gravity signature in the same area. The compositions exposed in Humboldt crater suggest that a preexisting basin might have excavated deeper crustal material. However, the underlying cause of the circularity of Mare Australes deposits, particularly those extending outside of the potential impact basin setting, is not yet understood. Thus, Australe may preserve fundamental information about mare volcanism potentially uncoupled from basin formation and structure. The objectives of this study are to use new high- resolution data (images, gravity, topography, and com- position) to reassess Australes mare deposits, deter- mine the timing and style of volcanism, identify discrete basalt deposits, and to further characterize the evolution of magmatism and subsurface structure in this area. Here, we focus on the northern Australe deposits (between Humboldt, Jenner, and Milne). As originally noted by Whitford-Stark (1979), Humboldt crater and its ejecta make an excellent stratigraphic marker that can be traced across much of the Australe region. The ejecta serves as a stratigraphic constraint for absolute model ages (AMAs) derived from crater size-frequency distributions (CSFDs)
A Multi-Sims Investigation of Water Content and D/H Ratios in Roberts Massif 04262 with Insight to Sources of Hydrogen in Maskelynite
Get PDFWe want to define the H2O content ([H2O]) and hydrogen (H) isotope composition of meteoritic material from Mars [1-3] with motivation to understand Mars volatile history, constrain geochemical signatures of interior water reservoirs (i.e. the Martian mantle) and explore effects of planetary (e.g. planet formation, magma ocean degassing) and local (e.g. volcanic degassing, impact melting and degassing) processes on H incorporated in minerals. Secondary ion mass spectrometry (SIMS) allows multiple avenues to address these questions. However, application to (1) precious astromaterials and (2) low level H measurements, pose specific challenges that are further complicated when combined. We present preliminary data of a multi-approach (SIMS vs. NanoSIMS) study of H in Roberts Massif 04262 (RBT 04262), an enriched lherzolitic shergottite with nonpoikilitic (NP) and poikilitic (P) lithologies [4]. We analyze olivine, pyrox-ene, and melt inclusions to compare indigenous mantle water, with impact-generated maskelynite to investigate H signatures due to shock
Incorporation of Nitrogen into Organics Produced by Fischer-Tropsch Type Chemistry
Get PDFLaboratory simulations have demonstrated that hydrothermal systems have the potential to produce a range of organic compounds through Fischer-Tropsch type (FTT) chemistry. The distribution of products depends on several factors, including the abundance and composition of feed-stock molecules, reaction temperature, and the physical and chemical characteristics of catalytic materials included in the reactions. The majority of studies per-formed to date have focused solely on inclusion of CO2 or CO and H2 as the carbon, oxygen and hydrogen sources, which limits the possible products to hydro-carbons, alcohols and carboxylic acids. A few studies have included nitrogen in the form of ammonia, which led to the production of amino acids and nitrogenous bases; and a separate suite of studies included sulfur as sulfide minerals or H2S, which yielded products such as thiols and amino acids. Although these demonstrations provide compelling evidence that FTT reactions can produce compounds of interest for the origins of life, such reactions have been conducted under a very limited range of conditions and the synthetic reaction mechanisms have generally not been well-characterized. As a consequence, it is difficult to extrapolate these results to geologic systems or to evaluate how variations in reactant compositions would affect the distribution of products over time. We have begun a series of laboratory experiments that will incorporate a range of precursor molecules in varying compositions to determine how these variables affect the relative amounts and speciation of life-essential elements in organic molecules produced under FTT conditions. In the present work, we focus on systems containing C, H, O and N