550909 research outputs found
Sort by
Leveraging ASTM Industry Standard F3269-17 for Providing Safe Operations of a Highly Autonomous Aircraft
Get PDFThis paper expands upon the ASTM industry standard F3269-17 to outline a run-time assurance (RTA) network architecture for use in ensuring safe flight operations of a highly autonomous aircraft. An RTA network architecture is proposed and critical features discussed to implement functions where automation is primarily responsible for the safety of the aircraft instead of a pilot. This shift in responsibility, made possible by the proposed architecture, is key to highly resilient automation and is a core enabler for future pilotless transportation concepts. The findings in this paper stem from the researchers experiences with ASTM in the generation of the standard and some seven years of RTA system development on various flight programs leveraging the RTA concepts outlined in the ASTM standard
Developing Extended Reality Projects in Support of Design, Fabrication and Procedure
Get PDFThe goal of this internship was to improve and create virtual reality simulations and visualizations for use in parallel with the design, fabrication, and analysis of flight ready hardware for areas like the Environmental Control and Life Support Systems (ECLSS) and also Space Systems. Specifically, my work was done in the XRSpace lab at Marshall Space Flight Center (MSFC) with assistance directly and indirectly from workers at KSC, JSC and LaRC. Led by David Reynolds, the XRSpace lab develops products for various entities at NASA. The work done in the XRSpace lab focuses on Extended Reality (XR) solutions for both simulations and visualization capabilities. The goal of the lab is to support the larger systems of NASA and to help find ways that XR technologies can streamline and optimize the design process. Extended Reality is an umbrella term that encompasses Mixed Reality, Augmented Reality, and Virtual Reality. In this capacity, I was able to complete several elements in the design, building, testing, and deployment for a vari of immersive experiences, including a VR procedure simulation, visualization aids, and a 360-image capture tool
Comparison of Three-Dimensional in Situ Observations and Phase-Field Simulations of Microstructure Formation During Directional Solidification of Transparent Alloys Aboard the ISS
Get PDFNo abstract availabl
Julia Programming Language Benchmark Using a Flight Simulation
Get PDFJulia is a relatively new computer language that aims to reduce the challenge for mathmodelers to develop fast computer tools and simulations. It potentially combines the ease-of-coding feature of scripting languages (like Python) with the performance of compiled languages (like C++). A key question for Julia application to the simulation domain is, Can Julia, with its obvious coding simplicity, provide runtime speeds comparable to conventional compiled languages for flight simulation? A unique combination of existing elements can be employed to address the previous question: Extensively documented object-oriented simulation architecture, Industry standard rocket flight simulation, Separate versions (C++, Java, and Python) already benchmarked
Work Scheduling and Fatigue Management
Get PDFThere are physiological limits to human performance, influenced by the internal programming of the sleep homeostat and circadian rhythms. There are known fatigue-related risks related to different work scheduling factors. This presentation was for presentation to supervisors and managers at Stennis Space Center to provide information about physiological risks factors associated with shiftwork scheduling practices and facilitate discussion about approaches to manage the related risks
Design of a Microgravity Hybrid Inflatable Airlock
Get PDFSpacewalks, or extra-vehicular activities (EVAs), are a critical component of human space exploration for science activities and habitat construction and maintenance. For NASA's proposed lunar Gateway system, an airlock module is required for vehicle maintenance, repair, and exploration. Traditional airlock structures are fully metallic, with two chambers, known as an equipment lock and a crew lock. The larger volume, called the equipment lock, serves as the storage, logistics and electronics area, while the smaller volume, called the crew lock, serves as the volume to transition from the vacuum of space to the pressurized cabin. A traditional metallic structure design offers mass efficiency for these elements, but cannot offer volume efficiency. The potential to use an inflatable fabric pressure shell supplemented by a metallic support structure allows for efficiency in both mass and volume. Inflatable structures are being used for human habitable space modules, starting with the Bigelow Expandable Activities Module on the International Space Station. They are high-strength fabric-based structures that are compactly stowed for launch and then, once in space, they are expanded and rigidized with internal pressure. They provide significant launch volume savings over metallic structures. For Gateway, a hybrid airlock design is proposed with both metallic and inflatable structural elements, taking advantage of each material's capabilities. A metallic equipment lock serves as both a docking node and provides pressurized volume for pre-EVA activities including pre-breathe and suit donning/doffing. A rigid equipment lock offers stowage space during launch for integrated hardware and suits. Adding an integrated inflatable crew lock provides the volume required for EVAs with minimal use of launch volume. Using dual inflatable crew locks provides redundancy and the capability to move large pieces of equipment into and out of the vehicle for repair and maintenance. The inflatable crew lock is deflated and packaged in the launch shroud and expanded after installation on the Gateway. This packing capability allows additional volume to be added to the equipment lock and fully utilize the capability of the launch vehicle. This report outlines the work completed to design, analyze, and test the systems of a microgravity airlock with inflatable crew locks. In detail, it includes launch vehicles, structural sizing of the metallic equipment lock, the fabric layers of the inflatable crew lock, the internal structure of the crew lock, the space suit interface elements, the crew restraint system, the hatches and pass-throughs, the material and thermal elements, and the crew operations for the usage of the system. This paper is meant to offer a reference design for a hybrid microgravity airlock design for deep space human exploration
STEReO: Combining NASA Technologies and Partnerships to Transform Current-Day Emergency Response Operations
Get PDFSTEReO brings together several technologies in Unmanned Aircraft Systems (UAS) Traffic Management (UTM), Autonomy, Communications, Human Factors, and Domain Expertise & Tools, aimed at providing scalability and flexibility, as well as operational resiliency to dynamic changes during a disaster event. Some of the concepts STEReO explores are: collaborative tools to ingest remote sensing information and distribute a common mission operating picture, apply ad-hoc communication networks to facilitate timely information sharing and communication of changes, vehicle-to-vehicle and onboard autonomy technologies ensure the safety and resiliency of operations, and apply NASA?s UAS traffic management system (UTM) as a public safety UAS Service Supplier (USS) to access and coordinate use of the airspace by both manned and unmanned operations. The potential benefits of STEReO include: standardized, cross-platform communication means increased interoperability and ease of cooperation/collaboration, increased situation awareness and common operating picture allow for earlier detection and decision making, and scalable to size and complexity of environment, operations, and mission objectives. This presentation gives an informational overview of the STEReO project to attendees of the annual North American Aerial Fire Fighting conference (AFFNA 2020)
NASAs Human Landing System: The Strategy for the 2024 Mission and Future Sustainability
Get PDFIn response to the 2018 White House Space Policy Directive- sustainable lunar exploration, and to the Vice Presidents March 2019 direction to do so by 2024, NASA is working to establish humanity's presence on and around the Moon by: 1) sending payloads to its surface, 2) assembling the Gateway outpost in orbit and 3) demonstrating the first human lunar landings since 1972. NASAs Artemis program is implementing a multi-faceted and coordinated agency-wide approach with a focus on the lunar South Pole. The Artemis missions will demonstrate new technologies, capabilities and business approaches needed for future exploration, including Mars. Assessing options to accelerate development of required systems, NASA is utilizing public-private engagements through the Human Exploration and Operations (HEO) Mission Directorates NextSTEP Broad Agency Announcements. The design, development and demonstration of the Human Landing System (HLS) is expected to be led by commercial partners. Utilizing efforts across mission directorates, the Artemis effort will benefit from programs from the Science Mission Directorate (SMD) and Space Technology Mission Directorate (STMD). SMDs Commercial Lunar Payload Services (CLPS) initiative will procure commercial robotic lunar delivery services and the development of science instruments and technology demonstration payloads. The Space Technology Mission Directorate (STMD) portfolio of technology advancements relative to HLS include lunar lander components and technologies for pointing, navigation and tracking, fuel storage and transfer, autonomy and mobility, communications, propulsion and power. In addition to describing the objectives and requirements of the 2024 Artemis mission, this paper will present NASAs approach to accessing the lunar surface with an affordable human-rated landing system, current status and the role o a sustainable lunar presence