550909 research outputs found
Sort by
Habitable-zone Exoplanet Observatory (HabEx) Baseline 4-M Telescope Design and Predicted Performance
Get PDFNo abstract availabl
Global Energetics of Solar Flares. VII. Aerodynamic Drag in Coronal Mass Ejections
No full textThe free energy that is dissipated in a magnetic reconnection process of a solar flare, generally accompanied by a coronal mass ejection (CME), has been considered as the ultimate energy source of the global energy budget of solar flares in previous statistical studies. Here we explore the effects of the aerodynamic drag force on CMEs, which supplies additional energy from the slow solar wind to a CME event, besides the magnetic energy supply. For this purpose, we fit the analytical aerodynamic drag model of Cargill and Vrnak et al. to the heighttime profiles r(t) of LASCO/SOHO data in 14,316 CME events observed during the first 8 yr (20102017) of the Solar Dynamics Observatory era (ensuring EUV coverage with AIA). Our main findings are (1) a mean solar wind speed of w = 472 414 km s(exp 1), (2) a maximum drag-accelerated CME energy of E(drag) <~2 10(exp32) erg, (3) a maximum flare-accelerated CME energy of E(flare <~1.5 10(exp33) erg, (4) the ratio of the summed kinetic energies of all flare accelerated CMEs to the drag-accelerated CMEs amounts to a factor of 4, (5) the inclusion of the drag force slightly lowers the overall energy budget of CME kinetic energies in flares from 7% to 4%, and (6) the arrival times of CMEs at Earth can be predicted with an accuracy of 23%
Study of Sabatier Catalyst Performance for a Mars ISRU Propellant Production Plant
Get PDFNASA is currently developing technologies for use in the field of in-situ resource utilization (ISRU). One of the technologies being advanced is the Sabatier, or methanation, reactor which converts carbon dioxide and hydrogen into methane gas and water at high temperatures. This paper discusses the catalyst life and performance issues for these reactors that would be expected on Mars and describes the test methods employed and observed results. The various catalysts were tested in their capacity for the continuous production of methane gas via the Sabatier reaction and the possible effects of launch vibration loads, exposure to liquid water, particulate contamination, and chemical contamination to the overall observed reaction efficacy of the catalysts evaluated
Motion Cueing for Stall Recovery Training in Commercial Transport Simulators
Get PDFStarting in 2019, airline pilots will be required to perform full stall recovery training in flight simulators. Historically, training simulators weren't required to provide training at conditions outside their normal flight envelope. Post-stall aircraft models are generally required to be implemented to simulate the aircraft response after the stall point. In addition, motion cues need to adequately represent this response to ensure the skills learned in simulator training are directly usable in real flight. This paper provides and overview of six simulator experiments conducted at NASA Ames Research Center to develop a motion cueing strategies for stall recovery training in commercial transport simulators. One of the experiments verified an enhanced motion cueing strategy for stall recovery training on a level-D-certified full flight simulator. This study showed that the enhanced motion results in lower maximum roll angles in the stall maneuver, lower minimum load factors in the recovery, lower numbers of secondary stick shakers in the stall recovery, and a lower maximum airspeed in the recovery. These results indicate that relatively minor enhancements to the motion logic of heritage commercial transport simulators can significantly improve pilot performance in simulated stall recoveries, and potentially improve stall recovery training
GeneLab: A Systems Biology Platform for Omics Analysis: Disseminate and Reuse Data, Tools, and Samples Post-Project
Get PDFNASA's GeneLab includes an open-access repository of some 200 plus omics datasets generated by biological experiments relevant to spaceflight (including simulated cosmic radiation and microgravity). In order to maximize the intelligibility of these data, particularly for users with limited bioinformatics knowledge, GeneLab is now transforming the data in the repository into actual biological and physiological knowledge of the genetic and proteomic signatures found in these samples. This processed data is being derived by establishing standard data analysis workflows vetted by 114 scientists who are members of the four GeneLab Analysis Working Groups (Animal AWG, Plant AWG, Microbe AWG, Multi-Omics AWG). AWG members from institutes spanning the U.S. and four other countries participate on a voluntary basis. The AWGs meet monthly to discuss data mining, compare results and interpretations, and test forthcoming releases of the GeneLab Data Systems (GLDS). GLDS version 3.0 has been available to the general public since October 1st 2018, and has been providing a professional state-of-the-art bioinformatics platform for everyone in the space biology community to upload their data into a space biology omics data commons, to process their data with vetted standard workflows and to compare to existing analyses. The user interface for the platform is being designed to be accessible to a broad variety of users including those with limited bioinformatics experience, including high school and college students who can use it to learn about omics data analysis and space biology. As such, Genelab will constitute a powerful general public outreach capability of NASA and the Space Biology community at large. Data mining of the GeneLab database by the AWG has already started generating very interesting findings, including reports linking specific spaceflight conditions such as radiation, microgravity or carbon dioxide levels to molecular changes seen across various species. In this presentation, we will report on the current and future objectives for GeneLab, and review recent studies reported by the various AWGs relating molecular changes observed in various animal models and tissue with microgravity, radiation, circadian rhythm, hydration and carbon dioxide conditions
Corrosion on Mars: Effect of the Mars Environment on Spacecraft Materials
Get PDFThis report presents the results of a one-year project, funded by NASAs Kennedy Space Center Innovation Fund in FY18, to conduct a theoretical study on the effect of the Mars environment on spacecraft materials. Corrosion resistance is one of the most important properties in selecting materials for landed spacecraft and structures that will support surface operations for the human exploration of Mars. Currently, the selection of materials is done by assuming that the corrosion behavior of a material on Mars will be the same as that on Earth. This is understandable since there is no data on the corrosion resistance of materials in the Mars environment. However, given that corrosion is defined as the degradation of a metal that results from its chemical interaction with the environment, it cannot be assumed that corrosion is going to be the same in both environments since they are significantly different. The goal of this research was to develop a systematic approach to understand corrosion of spacecraft materials on Mars by conducting a literature search of available data, relevant to corrosion in the Mars environment. This project was motivated by the suggestion, by a team of researchers, that some of the structural degradation observed on Curiosity's wheels may have been caused by corrosive interactions with the transient liquid brines, reported to be present on Mars, while the most significant damage was attributed to rock scratching. An extensive literature search, on data relevant to corrosion on Mars, confirmed the need to investigate the interaction between materials, used for spacecraft and structures designed to support long-term surface operations on Mars, and the Mars environment. Previous preliminary experiments, designed to look at the interaction between aerospace aluminum alloy (AA7075-T73) and the gases present in the Mars atmosphere, at 20 degC and a pressure of 700 Pa, showed that there is an interaction between the small amount of oxygen present in the Mars gas and the alloy, when there is a scratch that removes the protective aluminum oxide film. Further studies are needed to consider many other important components of the Mars environment that can affect this interaction such as: the presence of brines, the interaction between these brines and materials, the effect of radiation on these interactions, and the possible catalytic effects of the clays present in the Martian regolith. This theoretical study provides strong justification to conduct experimental work to investigate the interaction between spacecraft materials with simulated Martian environments to reduce Mars exploration costs
Modeling Heatshield Erosion due to Dust Particle Impacts for a Martian Entry Vehicle
Get PDFNew surface damage models are presented that predict the heat shield erosion due to dust particle impact when a spacecraft enters the Martian atmosphere. Existing models were based on Apollo-era experimental data and approximate methods for tracking the dust particle trajectories through the shock layer. These legacy methods will be compared against new results based on more sophisticated particle tracking methods and recent experimental data
Technology Development for the Modification of High Aspect Ratio Geometries for Thermal and Environmental Control
Get PDFA key technology development driver in environmental control systems and next generation optics are discussed utilizing thin film development borrowed from the semiconductor industry. The optical and physical properties of spacecraft radiator coatings are dictated by orbital environmental conditions. For example, coatings must adequately dissipate charge buildup when orbital conditions, such as polar, geostationary or gravity neutral, result in surface charging. Current dissipation techniques include depositing a layer of ITO (indium tin oxide) on the radiator surface in a high temperature process. The application of these enhanced coatings must be such that the properties in question are tailored to mission-specific requirements. The multi-billion-dollar semiconductor industry has adopted Atomic Layer Deposition (ALD) for self-assembly and atomic-scale placement. ALD is a cost-effective nanoadditive-manufacturing technique that allows for the conformal coating of substrates with atomic control in a benign temperature and pressure environment. By using ALD, modification of these coatings can be accomplished during coating application preprocessing. The preprocessing is rendered directly on the coating dry pigment before binding. Through the introduction of paired precursor gases, thin films can be deposited on a myriad of substrates ranging from glass, polymers, aerogels, metals, powders, and other high aspect-ratio micro- and nano- structures. By providing atomic-level control, where single layers of atoms can be deposited, the fabrication of metal transparent films, precise nano-laminates, and coatings of nano-channels and pores is achievable. A method has been demonstrated for the ALD of In2O3 and films on a variety of substrates from Si(100) wafers, glass slides, and on Z93P pigments resulting in a direct spaceflight application. Results will be presented that verify the chemical composition of ALD pigments and charge dissipation properties when the pigment goes through its binding and coating process and we present early results of ALD for carbon nanotube formation and encapsulation
Characterization of Laptop Fires in Spacecraft
Get PDFAn accidental fire involving the Lithium-Ion (Li-ion) battery in a laptop computer is one of the most likely fire scenarios on-board a spacecraft. These fires can occur from a defect in the battery that worsens with time, over-charging the battery and leading to failure or accidental damage caused by thermal runaway. While this is a relatively likely fire scenario, very little is known about the how a laptop computer fire would impact a sealed spacecraft. The heat release would likely cause a pressure rise, possibly exceeding the pressure limit of the vehicle and causing a relief valve to open. The combustion products from the fire could pose a short-term and long-term health hazard to the crew and the fire itself could cause injury to the crew and damage to the spacecraft. Despite the hazard posed by a laptop fire, there is little quantitative data on the fire size, heat release and toxic product formation. This paper presents the results of initial attempts to quantify the fire resulting from a failed laptop fire tested at the NASA White Sands Test Facility (WSTF). The data from the testing is useful to attempt to determine the fire size and characteristics such as maximum heat release rate, total heat release, maximum temperatures and fire duration are determined. Using existing models and correlations for fires, the measured fire characteristics are extrapolated to laptop fires on a vehicle the approximate size of the Orion spacecraft