550909 research outputs found
Sort by
An Experimental Approach to a Rapid Propulsion and Aeronautics Concepts Testbed
Get PDFModern aircraft design tools have limitations for predicting complex propulsion-airframe interactions. The demand for new tools and methods addressing these limitations is high based on the many recent Distributed Electric Propulsion (DEP) Vertical Take-Off and Landing (VTOL) concepts being developed for Urban Air Mobility (UAM) markets. We propose that low cost electronics and additive manufacturing can support the conceptual design of advanced autonomy-enabled concepts, by facilitating rapid prototyping for experimentally driven design cycles. This approach has the potential to reduce complex aircraft concept development costs, minimize unique risks associated with the conceptual design, and shorten development schedule by enabling the determination of many "unknown unknowns" earlier in the design process and providing verification of the results from aircraft design tools. A modular testbed was designed and built to evaluate this rapid design-build-test approach and to support aeronautics and autonomy research targeting UAM applications utilizing a complex, transitioning-VTOL aircraft configuration. The testbed is a modular wind tunnel and flight model. The testbed airframe is approximately 80% printed, with labor required for assembly. This paper describes the design process, fabrication process, ground testing, and initial wind tunnel structural and thermal loading of a proof-of-concept aircraft, the Langley Aerodrome 8 (LA-8)
Sustained Veggie: Considerations for Consistent On-Orbit Leafy Green Production
Get PDFNo abstract availabl
An Improved Plastically Dilatant Unified Viscoplastic Constitutive Formulation for Multiscale Analysis of Polymer Matrix Composites Under High Strain Rate Loading
Get PDFPolymer matrix composites are commonly used to fabricate energy-absorbing structures expected to experience impact loading. As such, a detailed understanding of the dynamic response of the constituent materials is necessary. Since the rate, temperature, and pressure dependence of carbon fiber reinforced polymer matrix composites are primarily manifestations of the rate, temperature, and pressure dependence of the polymer matrix, it is crucial that the constitutive behavior of the matrix be accurately characterized. In this work, an existing unified viscoplastic constitutive formulation is extended to ensure thermodynamic consistency and to more accurately account for the tension-compression asymmetry observed in the response of polymeric materials. A new plastic potential function is proposed, and elementary loading conditions are utilized to determine relations between model constants to ensure nonnegative plastic dissipation, a necessary thermodynamic requirement. Expressions for plastic Poissons ratios are derived and are bounded by enforcing nonnegative plastic dissipation. The model is calibrated against available experimental data from tests conducted over a range of strain rates, temperatures, and loading cases on a representative thermoset epoxy; good correlation between simulations and experimental data is obtained. Temperature rises due to the conversion of plastic work to heat are computed via the adiabatic heat energy equation. The viscoplastic polymer model is then used as a constitutive model in the generalized method of cells micromechanics theory to investigate the effects of matrix adiabatic heating on the high strain rate response of a unidirectional composite. The thermodynamic consistency of the model ensures plastic dissipation can only cause an increase in temperature. Simulation results indicate that significant thermal softening due to the conversion of plastic work to heat is observed in the composite for matrix dominated deformation modes
Information Management to Mitigate Loss of Control Airline Accidents
Get PDFLoss of control inflight continues to be the leading contributor to airline accidents worldwide and unreliable airspeed has been a contributing factor in many of these accidents. Airlines and the FAA developed training programs for pilot recognition of these airspeed events and many checklists have been designed to help pilots troubleshoot. In addition, new aircraft designs incorporate features to detect and respond in such situations. NASA has been using unreliable airspeed events while conducting research recommended by the Commercial Aviation Safety Team. Even after significant industry focus on unreliable airspeed, research and other evidence shows that highly skilled and trained pilots can still be confused by the condition and there is a lack of understanding of what the associated checklist(s) attempts to uncover. Common mode failures of analog sensors designed for measuring airspeed continue to confound both humans and automation when determining which indicators are correct. This paper describes failures that have occurred in the past and where/how pilots may still struggle in determining reliable airspeed when confronted with conflicting information. Two latest generation aircraft architectures will be discussed and contrasted. This information will be used to describe why more sensors used in classic control theory will not solve the problem. Technology concepts are suggested for utilizing existing synoptic pages and a new synoptic page called System Interactive Synoptic (SIS). SIS details the flow of flight critical data through the avionics system and how it is used by the automation. This new synoptic page as well as existing synoptics can be designed to be used in concert with a simplified electronic checklist (sECL) to significantly reduce the time to configure the flight deck avionics in the event of a system or sensor failure
Glen Torridon Mineralogy and the Sedimentary History of the Clay Mineral Bearing Unit
Get PDFClay minerals are common in ancient terrains on Mars and their presence at the surface alludes to aqueous processes in the Noachian to Early Hesperian (>3.5 Ga). Gale crater was selected as Curiositys landing site largely because of the identification of clay mineral rich strata from orbit. On Earth, the types of clay minerals (i.e., smectites) identified in Gale crater are typically juvenile weathering products that ultimately record the interaction between primary igneous minerals with the hydrosphere, atmosphere, and biosphere. Trioctahedral and dioctahedral smectite were identified by Curiosity in units stratigraphically below the Clay Mineral-Bearing Unit (CBU) identified from orbit. Compositional and sedimentological data suggest the smectite formed via authigenesis in a lake environment and may have been altered during early diagenesis. The CBU is stratigraphically equivalent to a hematite-rich unit to the north and stratigraphically underlies sulfate-rich units to the south, suggesting a dynamic environment and evolving history of water in the ancient Gale crater lake. Targeting these clay mineral rich areas on Mars with rover missions provides an opportunity to explore the aqueous and sedimentary history of the planet
Genetic Algorithm for Optimization of Neural Networks for Bayesian Inference of Model Uncertainty
Get PDFThe objective of this work was to develop a genetic optimization algorithm that can design a neural network capable of producing uncertainty estimates along with predictions. This algorithm is necessary because the inclusion of uncertainty modeling in a neural network greatly complicates the networks design space, making the development of a converging model extremely difficult and time consuming. The genetic algorithm presented in this work uses a number of value ranges for various configurable neural network parameters to create a randomly generated population of network architectures. The initially generated population is then evolved over the course of several generations, with the best performing models breeding to produce novel network configurations. Mutations are randomly applied to the network designs to facilitate the development of adaptations beneficial to the task being performed. An experiment was conducted to validate the proposed algorithm, in which the genetic optimizer was tasked with producing a neural network capable of predicting the sound pressure level (SPL) resulting from jet-surface interaction (JSI) noise. The data used for this task was generated at the NASA Glenn Research Center in the Aero-Acoustic Propulsion Laboratory. Starting with an initial population size of 35 randomly generated networks, and evolved over the course of 10 generations, the genetic algorithm produced a design able to predict SPL as a result of JSI noise within 0.272 dB, on average
Circulating miRNA Signature Predicts Health Risks Associated with Cancer and Spaceflight
Get PDFBiological risks associated with space radiation and microgravity are major concerns for long-term space travel. Through a Systems Biology approach, our previous NASA work has shown both TGF signaling pathways and miRNAs have a critical impact on defining health risks with and without space irradiation. We hypothesize that circulating microRNA (miRNA) signatures are driving microvascular disease and muscle degeneration associated with accelerating aging and will be enhanced by exposure to the space environment (radiation and microgravity). We are investigating this hypothesis with both in vivo and in vitro models to test novel antagonist therapies to these miRNA signatures as countermeasures to reduce space radiation-induced health risks. A comprehensive Systems Biology approach is utilized to examine the influence by high atomic number by high (H) atomic number (Z) and energy (E) (HZE) irradiation. To simulate low-dose exposure due to galactic cosmic rays (GCR), we used ions, energy, and doses determined by a NASA consensus formula of 7 different ions to represent GCR (referred to as GCR sim model). To similate high-dose radiation exposure due to solar particle events (SPE), we used a solar particle event (SPE) sim model which gave a total dose of 1Gy protons with energy ranges from 50MeV to 150MeV. C57BL/6 wild-type female mice were utilized for the irradiations with our established simulated microgravity model (hindlimb suspension model) and an in vitro 3D microvasculature tissue model under simulated microgravity (clinostat) conditions was also irradiated. To expand on the circulating miRNA signature determined from our preliminary data, we determined a group of conserved miRNAs which are commonly being regulated in the majority of the organs and tissues throughout the host using our established techniques. MiRNA-sequencing was done on serum (at time of sacrifice), liver, heart, and muscle (soleus muscle) tissue for all radiation groups. Additional validation of the key miRNAs was performed by droplet digital PCR (ddPCR). This revealed a key circulating miRNA signature (consisting of multiple miRNAs) impacting cardiovascular and muscular disease risk. Further in vitro experiments with CRISPR/Cas9 system to knockout the key miRNA signatures, novel self-delivering antagomirs, overexpression of the miRNAs test the functional impact of the miRNA signatures on both microvascular disease and muscle degeneration due to space irradiation. The current work has started to allow the possible development of a novel minimally invasive miRNA based radioprotector to be used as a countermeasure for space radiation. Collectively, understanding of how whole body space radiation impacts microvascular and tissue degeneration through circulating miRNAs will greatly enhance health risk prognostication and provide possible new mechanisms for protection against space radiation. This work is supported by the Translational Research Institute through NASA Cooperative Agreement NNX16AO69A (T-0404) awarded to AB
Power and Propulsion Element for Gateway: Configuration and Data Management of the NASA Power and Propulsion Element MBSE Model(s)
Get PDFThe following will be presented: CM/DM implementation environment for MBSE, traditional construct of CM/MBSE, goal for power and propulsion element team for CM/MBSE, steps to bridge the gap between CM and MBSE, how we implemented the standard tenets of CM, realized efficiencies, encountered challenges, lessons learned, and current state, and forward/future work
Evaluation of Tablet-Based Methods for Assessment of Contrast Sensitivity
Get PDFSome astronauts have suffered degradation of vision during long-duration space flight, suffering from a condition that has come to be known as Spaceflight Associated Neuro-ocular Syndrome (SANS). While related morphological changes can be observed with imaging technologies such as optical coherence tomography (OCT), it may be useful to have a rapid method for functional vision assessment. In this paper, we compare three tablet-based methods for rapid assessment of contrast sensitivity. First, a relatively novel method developed expressly for touch screens, in which the subject swipes a frequency/contrast sweep grating to indicate the boundary between visible and invisible patterns; second, a method-of-adjustment task in which the subject adjusts the contrast of a grating patch up and down to bracket the visual threshold; and third, a traditional temporal two-alternative forced choice (2AFC) task, in which the subject is presented with a near-threshold stimulus in one of two intervals, and must report the interval containing the stimulus. The swipe method shows variability comparable to the 2AFC method, and shows good agreement in estimates of the spatial frequency of peak sensitivity. The absolute sensitivity estimated with the swipe method is higher than that of the other methods, perhaps because subjects are biased to trace outside of the visible pattern region, or perhaps due to stimulus differences
Artemis Curation: Preparing for Sample Return from the Lunar South Pole
Get PDFSpace Policy Directive-1 mandates that the United States will lead the return of humans to the Moon for long-term exploration and utilization, followed by human missions to Mars and other destinations. In addition, the Vice President stated that It is the stated policy of this administration and the United States of America to return American astronauts to the Moon within the next five years, that is, by 2024. These efforts, under the umbrella of the recently formed Artemis Program, include such historic goals as the flight of the first woman to the Moon and the exploration of the lunar south-polar region. Among the top priorities of the Artemis Program is the return of a suite of geologic samples, providing new and significant opportunities for progressing lunar science and human exploration. In particular, successful sample return is necessary for understanding the history of volatiles in the Solar System and the evolution of the Earth-Moon system, fully constraining the hazards of the lunar polar environment for astronauts, and providing the necessary data for constraining the abundance and distribution of resources for in-situ resource utilization (ISRU). Here we summarize the ef-forts of the Astromaterials Acquisition and Curation Office (hereafter referred to as the Curation Office) to ensure the success of Artemis sample return (per NASA Policy Directive (NPD) 7100.10E)