550909 research outputs found
Sort by
Fracture Control for Additive Manufactured Spacecraft Structures
No full textFinal Paper is attached. This paper discusses how the intent of current NASA fracture control requirements may be applied to "fracture critical" additive manufactured spacecraft hardware. Fracture control is a multi-discipline design and certification methodology that is applied in order to mitigate catastrophic failure of structures resulting from growth of an undetected crack-like defect. The methodology is defined in existing spacecraft standards and is required by NASA on all human-rated space structures. Recently, standards have been published by NASA to define materials and processes requirements for certain metallic additive manufactured hardware, but procedures for fracture control implementation on additive manufactured parts are not yet addressed in detail in any standard or guidance document.The discussion contained herein is necessary at this time as new guidance in this area should be founded collaboratively by the technical community at large including industry, academia, and government. Three Fracture Control Certification Methods are proposed for discussion. Additionally, a concept for "Design for AM fracture control" is introduced. The goals of this paper are to further expose the need for maturing additive manufacturing fracture control guidance in the spacecraft industry and to generate discussion on what this guidance should consist of
Agile Approach to Assuring Software for NASA's Orion Spacecraft
No full textAgile software development is prevalent throughout the Government, and NASA is no exception. NASA's Orion spacecraft is being developed to return Astronauts to the moon in the next 5 years, and the role of software in achieving the ambitious mission objectives has expanded dramatically in the last few decades. This presentation is the story of how the Independent Verification and Validation team for Orion adapted to the Agile approach that the Orion Program was using to develop the flight software. Consider attending this session if you are working with software developers utilizing Agile development approaches, or are interested in learning about Agile and Lean principles that could help improve communication within your own team
Lipid Decontamination Procedures for Life Detection Missions
No full textMolecular biosignatures are key targets for current, proposed, and future life detection missions. With the high accuracy and low limit of detection (LOD) that new and future instruments will require, decontamination of life detection hardware is necessary to prevent false positives. Lipids are a molecular biosignature of interest, as they are ubiquitous to all life as we know it, can survive unaltered in the geologic record for longer than any other biomolecule (i.e. billions of years), and form through both biotic and abiotic processes. Lipids display origin-diagnostic molecular patterns that can reveal biotic or abiotic synthesis, so finding them and ascertaining their molecular features is important for potentially detecting evidence of life elsewhere. Traditional methods of decontamination, or contamination control (CC), primarily clean hardware through fabrication in sterile (cleanroom) environments, killing microbes, and removing/flushing contaminants off instrument and spacecraft components. However, research suggests that some standard cleaning methods are either unlikely to remove lipid contaminants or are incompatible with life detection instrument materials. To solve this problem, I propose to find, test, and verify a decontamination method that thoroughly cleans instruments by destroying lipid molecules, but is simultaneously compatible with major materials used in these instruments. I will study the effects of traditional CC methods (including Dry Heat Microbial Reduction and Vapor phase Hydrogen Peroxide) and experimental CC methods (Electron Beam Irradiation) on lipid molecules for application to life detection instrumentation. I will then develop a CC plan for a novel lipid detector (ExCALiBR, Extractor for Chemical Analysis of Lipid Biomarkers in Regolith) searching for lipids in either soil or icy world scenarios. This plan will uphold planetary protection regulation requirements and validate experimental analyses of in-situ life detection tests
Fine Guidance Sensor Data
No full textThe Kepler and K2 missions collected Fine Guidance Sensor (FGS) data in addition to the science data, as discussed in the Kepler Instrument Handbook (KIH, Van Cleve and Caldwell 2016). The FGS CCDs areframe transfer devices located in the corners of the Kepler focal plane, which are read out 10 times every second. The FGS data are being made available to the user community for scientific analysis as flux and centroid time series, along with a limited number of FGS full frame images which may be useful for constructing a World Coordinate System (WCS) or otherwise putting the time series data in context. This document will describe the data content and file format, and give example MATLAB scripts to read the time series
Low-Thrust Trajectory Design for a Cislunar CubeSat Leveraging Structures from the Bicircular Restricted Four-Body Problem
No full textThe upcoming Lunar IceCube (LIC) mission will deliver a 6U CubeSat to a low lunar orbit via a ride-share opportunity during NASAs Artemis 1 mission. This presents a challenging trajectory design scenario, as the vast change in energy required to transfer from the initial deployment state to the destination orbit is compounded by the limitations of the LICs low-thrust engine. This investigation addresses these challenges by developing a trajectory design framework that utilizes dynamical structures available in the Bicircular Restricted Four-Body Problem (BCR4BP) along with a robust direct collocation algorithm. Maps are created that expedite the selection of invariant manifold paths from a periodic staging orbit in the BCR4BP that offer favorable connections between the LIC transfer phases. Initial guesses assembled from these maps are passed to a direct collocation algorithm that corrects them in the BCR4BP while including the variable low-thrust acceleration of the spacecraft engine. Results indicate that the ordered motion provided by the BCR4BP and the robustness of direct collocation combine to offer an efficient and adaptable framework for designing a baseline trajectory for the LIC mission
Insight: the First Mission to Thoroughly Study the Deep Interior of Mars
No full textNo abstract availabl
MAGIK Animation of Robotic Operations Preparing for the Departure of Flight NG-12 from ISS
No full textNo abstract availabl
Insight and SEIS on Mars: First Results After 200 Sols
No full textSlightly less than 50 years after the deployment of Apollo 11 seismometer, and slightly more than 41 years after the operational end of the combined Apollo seismic network, seismology is back to operations in planetary science. InSight, or Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, is a mission dedicated to understand the formation and evolution of terrestrial planets through the investigation of the interior structure and processes of Mars. This presentation will outline early mission results, focusing primarily on SEIS, the Seismic Experiment for Interior Structure
Astro2020 APC White Paper Project: The Simons Observatory
No full textThe Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs. The SO experiment in its currently funded form (SO-Nominal) consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation. With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in mapping speed over currently operating (Stage 3) experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4. Construction of SO-Nominal is fully funded, and operations and data analysis are funded for part of the planned five-year observations. We will seek federal funding to complete the observations and analysis of SO-Nominal, at the 75M level for an expansion of the SO (SO-Enhanced) that fills the remaining focal plane in the LAT, adds three SATs, and extends operations by five years, substantially improving our science return. By this time SO may be operating as part of the larger CMB-S4 project. This white paper summarizes and extends material presented in, which describes the science goals of SO-Nominal, and which describe the instrument design
Can Organic Haze and O2 Plumes Explain Patterns of Sulfur Mass-Independent Fractionation During the Archean?
No full textThe existence of mass-independently fractionated sulfur in Archean rocks is almost universally accepted as evidence for low atmospheric O2 and O3 concentrations at that time. But the detailed patterns of the values and of the ratios / and / remain to be explained, and the mechanism for producing the mass-independent fractionation remains controversial. Here, we explore the hypothesis that the relatively low values seen during the Mid-Archean, 2.7-3.5 Ga, were caused by the presence of organic haze produced from photolysis of methane. This haze helped shield SO2 from photolysis, while at the same time providing surfaces on which unfractionated short-chain sulfur species could condense. The evolution of oxygenic photosynthesis, and the concomitant disappearance of organic haze towards the end of the Archean allowed more negatively fractionated S4 and S8 to form, thereby generating large positive fractionations in other sulfur species, including sulfate and H2S. Reduction of this sulfate to H2S by bacteria, followed by incorporation of H2S into pyrite, produced the large positive values observed in the Neoarchean rock record, 2.5-2.7 Ga