Bayburt University Institutional Repository
Not a member yet
3703 research outputs found
Sort by
A randomized controlled trial of reflexology effect after abdominal surgery on patient satisfaction, pain and vital signs
Objective: In our study, we investigated the effect of reflexology on patient satisfaction, pain and vital signs after abdominal surgery.Method: This study was conducted as a randomized controlled trial with the participation of 156 abdominal surgery patients hospitalized in the general surgery unit of a training and research hospital. Personal Information Form, Visual Analogue Scale and Newcastle Nursing Care Satisfaction Scale were used in data collection. We performed the data analysis with One-way analysis of variance, Chi-squared test, paired samples t-test, and independent samples t-test.Results: When the pain, vital signs and satisfaction levels of the experimental and control groups were compared, the pain intensity of the experimental group was found to be lower and the level of satisfaction was higher after reflexology (p<0.01). After reflexology, the blood pressure was closer to 120/80 in the experimental group, the respiratory rate was between 16-22 (number/minute), the difference between the experimental and control groups were statistically significant (p<0.01). There was no statistically significant difference between the pulce oximetry values between the experimental and control groups.Conclusion: Surgical pain and non-optimal vital signs that are not well managed after surgery causes various complications and decrease patient satisfaction. The results of our study emphasize the power of reflexology in effective surgical pain management and normalizing vital signs and increasing patient satisfaction. We suggest that reflexology be performed to patients following abdominal surgery
Worship, prophet and woman in the culture of revelation
Lisansüstü Eğitim Enstitüsü, Temel İslam Bilimleri Ana Bilim DalıYüce Allah'ın insanoğluna ilahi mesajlarını iletmesi olarak tanımlanan vahiy olgusu semavi dinlerde önemli bir yere sahiptir. Bu dinlerde tanrının insan ile iletişimine vesile olması itibariyle vahiy, tanrı tasavvurunu ve din anlayışını şekillendirmektedir. Nübüvvet temeli üzerine kurulu olan vahiy inanç ve ibadet başta olmak üzere birçok meselede öğretici, değiştirici ve dönüştürücü vasıflarıyla kişiye ve topluma önemli katkılar sağlamıştır. Dolayısıyla vahiy öğretisi geçmişten günümüze keyfiyeti itibariyle merak edilmiş ve üzerinde araştırmalar yapılmıştır. Bu çalışma vahiy kültüründe peygamber, ibadet ve kadın konuları bağlamında mukayeseli bir çalışma olarak iki bölümden oluşmaktadır. Birinci bölümde ilahi dinlerde (Yahudilik, Hıristiyanlık, İslam) vahiy kavramının nasıl anlaşıldığı hususu araştırılmıştır. Vahiy kavramı ilahi dinlerin kutsal kitapları temel alınmak suretiyle değerlendirilmiş ve vahyin kaynağı olan tanrı inancına atıf yapılmıştır. Yüce Yaratıcı vahiyle insanlara emir ve yasaklarını iletmiş, onlara dünya ve ahiret mutluluğu sağlayacak bilgiler vermiştir. Dolayısıyla vahyi anlamak dinin temel prensiplerini anlamak için ilk adımdır. İkinci bölümde ise peygamber, ibadet ve kadın konuları ele alınarak bu konuların ilahi dinlerde nasıl anlaşıldığından bahsedilmiştir. Bu konulardan bahsederken ilahi dinlerin kutsal kitapları temel alınmak suretiyle çeşitli kaynaklardan faydalanılarak her konunun bitiminde bahsi geçen meseleler ilahi dinler kapsamında mukayese edilmiştir.The phenomenon of revelation, which is defined as the transmission of divine messages by Almighty Allah to human beings, has an important place in monotheistic religions. In these religions, revelation shapes the conception of God and the understanding of religion, as it is the means by which God communicates with man. Revelation, which is built on the foundation of prophethood, has made important contributions to the individual and society with its teaching, changing and transforming qualities in many issues, especially faith and worship. Therefore, the doctrine of revelation has been curious about its nature from past to present and researches have been made on it. This study consists of two parts as a comparative study in the context of prophet, worship and women in the culture of revelation. In the first chapter, how the concept of revelation is understood in divine religions (Judaism, Christianity, Islam) is investigated. The concept of revelation has been evaluated on the basis of the holy books of divine religions and the belief in god, which is the source of revelation, has been referred to. The Almighty Creator conveyed his orders and prohibitions to people by revelation and gave them information that would provide happiness in this world and in the hereafter. Understanding revelation is therefore the first step towards understanding the basic principles of religion. In the second part, the subjects of the prophet, worship and women were discussed and how these subjects were understood in divine religions was mentioned. While talking about these subjects, the issues mentioned at the end of each subject were compared within the scope of divine religions by making use of various sources, based on the holy books of divine religions
Synthesis of reduced graphene oxide/nickel ferrite composite nanoparticles and investigation of their photocatalytic activity
Lisansüstü Eğitim Enstitüsü, Kimya Ana Bilim DalıBu çalışmada, hidrotermal sentez metoduyla NiFe2O4 nanopartiküller ve indirgenmiş grafen oksit (NiFe2O4@rGO) kompozitlerinin üretilmesi ve daha sonra bu malzemelerin atıksulardan fotokatalitik oksidasyon metoduyla boyar madde gideriminde fotokatalizör olarak kullanılması ve fotokatalitik aktivitelerinin karşılaştırılması planlanmıştır. Buna göre, çalışma üç aşamalı olarak planlanmıştır. Birinci bölümde, modifiye edilmiş hummers metoduyla grafit tozundan başlanarak önce grafen oksit daha sonra indirgenmiş grafen oksit üretilmiştir. İkinci aşamada hidrotermal sentez metoduyla indirgemiş grafen oksit ve NiFe2O4 nanopartiküllerden oluşan kompozit bir malzeme üretilmiştir. Çalışmanın üçüncü aşamasında ise hidrotermal sentez yöntemiyle üretilen saf NiFe2O4 ve NiFe2O4 indirgenmiş grafen oksit kompoziti, procion yellow HE-3G olarak bilinen bir tekstil boyasının fotokatalitik oksidasyonla bozundurulması prosesinde fotokatalizör olarak kullanılmış ve her iki malzeme için gözlemlenen giderim verimleri karşılaştırılmıştır. Toz haldeki indirgenmiş grafen oksit, modifiye edilmiş hummers metoduyla başarılı bir şekilde sentezlenmiştir. Elde edilen indirgenmiş grafen oksit üzerinde hidrotermal sentez yöntemiyle NiFe2O4 nanopartikülller sentezlenmiştir. Elde edilen tüm ürünlerin yapısal ve morfolojik özellikleri, XRD, FT-IR, SEM, TEM, BET ve VSM teknikleri ile kapsamlı bir şekilde karakterize edilmiştir. Elde edilen sonuçlar NiFe2O4 nanopartiküllerin başarılı bir şekilde sentezlendiğini ve ürün nanopartiküllerin yaklaşık 10-20 nm partikül boyutuna sahip oldukları belirlenmiştir. Ayrıca elde edilen NiFe2O4 nanopartiküllerin indirgenmiş grafen oksit ile güçlü ve kararlı kompozitler oluşturdukları belirlenmiştir. Üretilen NiFe2O4 nanopartiküller ve rGO@NiFe2O4 kompozit nanopartiküller, boya içeren atıksulardan boyarmaddelerin fotokatalitik oksidasyonla giderimi prosesinde fotokatalizör olarak kullanılmıştır. Üretilen partiküllerin fotokatalitik aktivitelerinin belirlenmesi için, her iki katalizör ile 0,010 g/L, 0,025 g/L, 0,050 g/L ve 0,10 g/L katalizör dozajları ile denemeler yapılmıştır. Elde edilen veriler her iki katalizöründe boya gideriminde oldukça iyi bir fotokatalitik aktivite sergiledikleri ve yaklaşık 60 dakikada çözeltideki boyarmaddenin tamamen giderilebildiği görülmüştür. Nikel ferrit ve indirgenmiş grafen oksit (rGO@NiFe2O4) kompozitinin çok daha etkili bir fotokatalitik aktivite sergilediği gözlemlenmiştir. Ayrıca, fotokataliz denemelerinden elde edilen deneysel verilere göre, bu prosesin yalancı birinci dereceden kinetik model ile tam uyumlu olduğu belirlenmiştir.In this study, it is planned to produce nickel ferrite (NiFe2O4) nanoparticles and nickel ferrite/reduced graphene oxide (NiFe2O4@rGO) composites by hydrothermal synthesis method. Then these materials were used as photocatalysts in the removal of dyes from wastewater by photocatalytic oxidation method and to compare their photocatalytic activities. Accordingly, the study was planned in three stages. In the first part, first graphene oxide and then reduced graphene oxide were produced starting from graphite powder by the modified hummers method. In the second stage, pure NiFe2O4 nanoparticles and a composite material consisting of reduced graphene oxide and NiFe2O4 nanoparticles the was produced by hydrothermal synthesis method. In the third stage of the study, pure NiFe2O4 and NiFe2O4@rGO composite nanoparticles produced by hydrothermal synthesis method was used as a photocatalyst in the photocatalytic oxidation of a textile dye known as procion yellow HE-3G, and the observed removal efficiencies for both materials were compared. Reduced graphene oxide powder was successfully synthesized by the modified Hummers method. NiFe2O4 nanoparticles were synthesized by hydrothermal synthesis method on the obtained reduced graphene oxide. The structural and morphological properties of the products obtained were comprehensively characterized by XRD, FT-IR, SEM, TEM, BET and VSM techniques. The results obtained showed that NiFe2O4 nanoparticles were successfully synthesized and the product nanoparticles had a particle size of approximately 10-20 nm. In addition, it was determined that the synthesized NiFe2O4 nanoparticles formed strong and stable composites with reduced graphene oxide. Then pure NiFe2O4 nanoparticles and NiFe2O4@rGO composite nanoparticles were used as photocatalysts in the photocatalytic oxidation removal of dyestuffs from dye-containing wastewater. In order to compare the photocatalytic activities of the produced particles, experiments were carried out with both catalysts with catalyst dosages of 0.010 g/L, 0.025 g/L, 0.050 g/L and 0.10 g/L. The data obtained demonstrated that both catalysts exhibited a very good photocatalytic activity in dye removal and the dyestuff in the solution could be completely removed in about 60 minutes. It was observed that the composite of nickel ferrite and reduced graphene oxide (NiFe2O4 @ rGO) exhibited a much more effective photocatalytic activity. In addition, according to the experimental data obtained from the photocatalysis experiments, it was determined that this process is fully compatible with the Pseudo-first-order kinetic model
Thermal, rheological, and mechanical characterization of compression and injection molded ultra-high molecular weight polyethylene, high density polyethylene, and their blends
Tensile and impact test samples of ultra-high molecular weight polyethylene (UHMWPE), high-density polyethylene (HDPE), and their blends at various UHMWPE/HDPE weight ratios were prepared via compression molding and injection molding for thermal, rheological, and mechanical characterization. A twin-screw extruder with either a tapered die with air-cooling or a regular die was used to compound and extrude the materials prior to pelletization and molding. To the best of our knowledge, there has been no publication on pelletizing neat UHMWPE using a regular extruder. The differential scanning calorimetry analysis suggested the occurrence of re-crystallization and co-crystallization for all the blends. The rheology test confirmed that all the blends exhibited a solid-like behavior and the degree of compatibility increased with increasing HDPE content in the blends. A strong synergistic effect was observed the blends possessed a higher tensile and impact strength than their neat UHMWPE and HDPE counterparts. The compression molded (95/5) UHMWPE/HDPE samples extruded using the tapered die yielded the highest tensile strength (50.1 MPa), which was about 40% higher than that of the neat UHMWPE samples. The best composition of these blends for compression and injection molded parts is 10% HD and 50% HD, respectively.Consolidated Papers Foundation Professorship; Saudi Basic Industries Corporation; Kuo K. and Cindy F. Wang Professorship; Wisconsin Institute for DiscoveryConsolidated Papers Foundation Professorship; Saudi Basic Industries Corporation; Kuo K. and Cindy F. Wang Professorship; Wisconsin Institute for Discover
The effect of eight weeks of sport climbing training on anxiety, happiness and various motor variables
Lisansüstü Eğitim Enstitüsü, Beden Eğitimi ve Spor Ana Bilim Dalı, Beden Eğitimi ve Spor Bilim DalıBu çalışmanın amacı, spor tırmanış eğitiminin daha önce spor tırmanış deneyimi olmayan bireyler üzerindeki fiziksel ve psikolojik etkilerinin incelenmesidir. Bu amaç doğrultusunda üniversite öğrencilerinden oluşan örneklem seçilerek ve araştırma evrenini de daha önce spor tırmanışı yapmayan bireyler oluşturmuştur. 8 haftalık bir spor tırmanış antrenman programı tasarlanıp uygulanmış ve 28 gönüllü 14 deney ve 14 kontrol grubuna ayrılmıştır. Deney grubu 8 hafta boyunca haftada 3 gün spor tırmanış antrenmanına katılırken, kontrol grubu bu süre zarfında fiziksel aktivitede bulunmamıştır. Çalışmada ön-test ve son-test kontrol gruplu deneysel desen kullanılmış olup antropometrik ölçümler, performans testleri, Oxford Mutluluk Ölçeği ve Durumluk-Sürekli Kaygı Envanteri'nin sürekli kaygı boyutu eğitim programının öncesinde ve sonrasında tüm katılımcılara uygulanmıştır. Eğitim programı öncesi ve sonrasında değişkenler arasındaki farkları incelemek için Mann-Whitney U Testi ve Wilcoxon İşaretli Sıralar testleri kullanılmıştır. Ayrıca Mann-Whitney U Testi ön test verilerinde anlamlı çıkan dikey sıçrama ve sırt kuvveti Quade's ANCOVA ile yeniden hesaplanmıştır ve yorumlanmıştır. Sonuçlar, deney grubundaki katılımcıların dikey sıçrama, hem sol hem de sağ el için kavrama kuvveti, sırt kuvveti ve sürekli kaygılarında istatistiksel olarak anlamlı farklılıklar olduğunu göstermiştir. Mutluluk ve esneklikte ise iyileşmeler gözlenmiş, ancak bu değişiklikler istatistiksel olarak anlamlı bulunmamıştır. Bu çalışma diğer çalışmalardan farklı olarak 8 haftalık spor tırmanış eğitiminin sonunda sürekli kaygı ile ilgili olarak anlamlı istatistiksel sonuçlar elde edilmiştir. Ayrıca deney grubundaki tüm katılımcıların sol el pençe kuvvetinde gelişme bulmuştur. Sonuç olarak spor tırmanışın üniversite öğrencileri için fiziksel ve zihinsel sağlık üzerinde olumlu etkileri olduğu söylenebilinir. Spor tırmanışın etkisinin daha kapsamlı bir şekilde anlaşılması için daha büyük örneklem boyutları, farklı yaş grupları ve bouldering gibi farklı tırmanış çeşitleriyle ilgili daha fazla araştırma yapılması önerilmektedir.The aim of this study is to examine the physical and psychological effects of sport climbing training on individuals who have no previous sport climbing experience. For this purpose, a sample of university students was selected and the research population consisted of individuals who had not done sport climbing before. An 8-week sport climbing training program was designed and implemented and 28 volunteers were divided into 14 experimental and 14 control groups. The experimental group participated in sport climbing training 3 days a week for 8 weeks, while the control group did not engage in physical activity during this period. Pre-test and post-test control group experimental design was used in the study and anthropometric measurements, performance tests, Oxford Happiness Scale and trait anxiety dimension of State-Trait Anxiety Inventory were applied to all participants before and after the training program. Mann-Whitney U Test and Wilcoxon Signed Rank tests were used to examine the differences between the variables before and after the training program. In addition, vertical jump and back strength, which were significant in the Mann-Whitney U Test pre-test data, were recalculated and interpreted by Quade's ANCOVA. The results showed that the participants in the experimental group had statistically significant differences in vertical jump, grip strength for both left and right hand, back strength and trait anxiety. Improvements were also observed in happiness and flexibility, but these changes were not statistically significant. Unlike other studies, this study obtained significant statistical results on trait anxiety at the end of 8 weeks of sport climbing training. In addition, left hand claw strength of all participants in the experimental group improved. As a result, it can be said that sport climbing has positive effects on physical and mental health for university students. Further research with larger sample sizes, different age groups and different types of climbing such as bouldering is recommended for a more comprehensive understanding of the effects of sport climbing
Comparison of bioactive constituents by HPLC-DAD-ESI-MS and UFLC and in vitro antioxidant activities of blossom honey, bee pollen, and propolis
The aim of this study was to analyze the total phenolic content, phenolic profile, and antioxidant activity of honey, bee pollen, and propolis samples from Turkey's Black Sea Region. The total phenolic content of these bee products was found using Folin-Ciocalteu's method, and their antioxidant capacity was found using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and cupric ion reducing antioxidant capacity (CUPRAC) assays. Phenolic compounds of honey samples were characterized by high-performance liquid chromatography coupled to a photodiode array detector and mass spectrometer (HPLC-DAD-ESI-MS), while phenolic compounds of bee pollen and propolis samples were quantified ultra-fast liquid chromatography (UFLC). The total phenolic values for honey, bee pollen and propolis were 6.32-18.21 mg GAE/100 g, 547.64-769.4 mg GAE/100 gr, and 6096.1-11,564 mg GAE/100 gr, respectively. DPPH and CUPRAC values of honey, pollen and propolis were 11.05-21.38% and 0.38-1.48 & mu;mol Trolox/g; 24.67-38.63% and 0.03-0.05 mmol Trolox/g; 11.81-34.12% and 0.47-0.89 mmol Trolox/g, respectively. About 30 different phenolic compounds were identified as quantitative. Our findings have shown that all bee products examined in the study are found to contain gallic acid, naringenin, and caffeic acid. In terms of total phenolic content and antioxidant activity, the bee product extracts were ranked as follows: propolis > bee pollen > honey. The high concentration of phenolic compounds in propolis explains its remarkable antioxidant effect.Istanbul Technical University [41275]AcknowledgementsThis work was supported by research fund of the Istanbul Technical University, under Project No. 41275
Morin ameliorates methotrexate-induced hepatotoxicity via targeting Nrf2/HO-1 and Bax/Bcl2/Caspase-3 signaling pathways
BackgroundOrgan toxicity limits the therapeutic efficacy of methotrexate (MTX), an anti-metabolite therapeutic that is frequently used as an anti-cancer and immunosuppressive medicine. Hepatocellular toxicity is among the most severe side effects of long-term MTX use. The present study unveils new confirmations as regards the remedial effects of morin on MTX-induced hepatocellular injury through regulation of oxidative stress, apoptosis and MAPK signaling.Methods and resultsRats were subjected to oral treatment of morin (50 and 100 mg/kg body weight) for 10 days. Hepatotoxicity was induced by single intraperitoneal injection of MTX (20 mg/kg body weight) on the 5th day. MTX related hepatic injury was associated with increased MDA while decreased GSH levels, the activities of endogen antioxidants (glutathione peroxidase, superoxide dismutase and catalase) and mRNA levels of HO-1 and Nrf2 in the hepatic tissue. MTX treatment also resulted in apoptosis in the liver tissue via increasing mRNA transcript levels of Bax, caspase-3, Apaf-1 and downregulation of Bcl-2. Conversely, treatment with morin at different doses (50 and 100 mg/kg) considerably mitigated MTX-induced oxidative stress and apoptosis in the liver tissue. Morin also mitigated MTX-induced increases of ALT, ALP and AST levels, downregulated mRNA expressions of matrix metalloproteinases (MMP-2 and MMP-9), MAPK14 and MAPK15, JNK, Akt2 and FOXO1 genes.ConclusionAccording to the findings of this study, morin may be a potential way to shield the liver tissue from the oxidative damage and apoptosis
Strategy and security: Transformation of the defense industry in Turkey
Lisansüstü Eğitim Enstitüsü, Siyaset Bilimi ve Kamu Yönetimi Ana Bilim DalıTüm devletlerin ana yükümlülüklerinden biri olan güvenlik olgusu, millet bütünlüğü ve vatan güvenliğinin sağlanmasıdır. Günümüzde ülkeler, ülke güvenliğini ve ulus bütünlüğünü bozmaya yönelik hem içerden hem de dışardan oluşabilecek tüm tehditlere karşı, stratejik konumlarını da dikkate alarak savunma sanayilerini ve stratejilerini geliştirmektedirler. Bu bağlamda süreklilik arz etmesi gereken savunma sanayii ise, bir ulusun güvenliğinin sağlanması için ihtiyaç duyulan tüm savunma araçlarının tasarımını oluşturan, değişmekte olan çağa ayak uydurmak için yenilenen ve kendisini geliştiren, her türlü teçhizatı üreten kuruluşlar ve işletmeler topluluğudur. Türkiye Cumhuriyeti, küreselleşen dünyada sahip olduğu coğrafi yapısı ve jeopolitik konumu itibarıyla dış tehditlere karşı kendi istikrarını sağlayıcı ve yıldırıcı bir güce sahip olma ihtiyacı sebebiyle, değişen ve gelişen çağa ayak uydurarak, ülkenin ekonomik refahına zarar vermeden, güçlü ve gelişmiş savunma silahlarına ve milli güç unsurlarına sahip olmak zorundadır. Çalışmanın konusunu strateji, güvenlik ve savunma sanayisinin dönüşümü oluşturmaktadır. Çalışmada nitel araştırma yöntemi uygulanmıştır. Çalışma gerek ülke içinden gerekse ülke dışından kaynaklanan güvenlik sorunlarının Türk savunma sanayisinin 2000 yılından sonraki gelişimine katkılarının incelenmesini amaçlanmaktadır. Ülkemizin bulunduğu coğrafya ve stratejik konumu sebebi ile maruz kaldığı güvenlik sorunlarının neler olduğu çalışmanın dördüncü bölümünü oluşturmuş ve detaylı bir şekilde incelenmiştir. Son bölümde ise 2000 yılından sonra savunma sanayisinde yaşanan gelişmeler incelenmiş ve Türkiye'nin maruz kaldığı güvenlik sorunlarının, ülkemizin savunma alanındaki yatırımlarının ve çalışmalarının yönünü belirleyen, mevcut konumuna ulaşmasında en önemli etken olduğu sonucuna ulaşılmıştır.All states' primary obligations are to ensure security, national integrity, and homeland security. Today, countries develop their defense industries and strategies, taking into account their strategic positions, against all threats that may arise from both inside and outside to disrupt national security and integrity. In this context, the defense industry, which should be continuous, is a collection of organizations and businesses that design all the defense tools needed for the protection of a nation's sovereignty, renew it to keep up with the changing age, develop itself, and produce all kinds of equipment. Due to its geographical structure and geopolitical position in the globalizing world, the Republic of Turkey must have strong and advanced defense weapons and national power elements to be a dissuasive force against external threats and to stabilize them. And also shouldn't harm the economic welfare of the country while doing so. The subject of the study is the transformation of strategy, security and defense industry. A qualitative research method was used in the study. The aim of the study is to examine the contribution of security problems arising from both inside and outside of the country to the development of the Turkish defense industry after 2000. In the first part of the study, the Introduction and the Conceptual Framework are included in the second part. Strategy, security, and defense industry are explained in detail in this section. In the third part, the establishment, development process, and important milestones of the Turkish defense industry from the historical process to the present are discussed and its effects on the defense industry policies today are analyzed. The security problems that our country is exposed to due to its geography and strategic location, constituted the fourth part of the study and examined in detail. In the last part, the developments in the defense industry after 2000 were examined and it was concluded that the security problems that Turkey was exposed to were the most important factor determining the direction of our country's investments and activities in the field of defense and reaching its current position
Türkiye'de Çokkültürlü Eğitim Alanında Yapılan Araştırmalardaki Eğilimin Belirlenmesi: Bir İçerik Analizi Çalışması
Bu araştırma, Türkiye’de çokkültürlü eğitim üzerine yapılmış araştırmaların incelenmesine yönelik olarak hazırlanmış bir içerik analizi çalışmasıdır. Ülkemizde çokkültürlü eğitim alanında yapılan araştırmalar son yıllarda önem kazanarak devam etmektedir. Literatürde çokkültürlü eğitim ile ilgili lisansüstü tez ve makale boyutunda birçok çalışma yer bulmaktadır. Bu alandaki araştırmalarda öne çıkan eğilimlerin belirlenmesi alanyazın açısından önemli görülmektedir. Bu araştırmanın amacı Türkiye’de çokkültürlü eğitim alanında yapılan araştırmaların analizi yoluyla araştırmalardaki genel eğilimlerin belirlenmesidir. Araştırma kapsamında çokkültürlü eğitim ile ilgili yapılmış olan lisansüstü tez çalışmaları ve makaleler incelenmiştir. Çokkültürlü eğitim alanında yapılan araştırmalar araştırmacı tarafından belirli ölçütler temel alınarak taranmış ve dosyalanmıştır. Dosyalanan çalışmalar araştırmacı tarafından okunarak kayıt altına alınmıştır. Araştırmada toplam 107 çalışma analiz edilmiştir. Araştırmacı tarafından geliştirilen kontrol formu ile çalışmaların genel özellikleri; yayın türü, yayın yılı, araştırma yöntemi, araştırma deseni, veri toplama araçları, örneklem türü, örneklem büyüklüğü ve veri analiz yöntemi ölçütleri dahilinde analiz edilmiştir. Veri analizi sürecinde betimsel içerik analizi kullanılmıştır. Araştırma sonucunda çokkültürlü eğitim alanında yapılan araştırmaların 2015 yılından itibaren artış gösterdiği görülmüştür. Türkiye’de çokkültürlü eğitim alanında yapılan araştırmalar, büyük oranda araştırma makalelerine dayanmaktadır. Lisansüstü düzeyde ve özellikle doktora düzeyinde yapılmış çalışmaların ise sayıca daha sınırlı olduğu görülmektedir. Çokkültürlü eğitim konusunda yapılan çalışmaların araştırma yöntemlerine bakıldığında, çalışmaların yaklaşık yarısında nicel araştırma yöntemlerinin kullanıldığı görülmektedir. Çokkültürlü eğitim araştırmalarında örneklem grubu olarak en fazla öğretmenler ve öğretmen adaylarının tercih edildiği ve en fazla tutum, görüş ve algı konularına odaklanıldığı sonucuna varılmıştır
MW Assisted Synthesis of New 4,6-diaryl-3,4-Didhydropyrimidines-2(1H)-thione Derivatives: Tyrosinase Inhibition, Antioxidant, and Molecular Docking Studies
A number of new methoxy-substituted 4,6-diaryl-3,4-dihydropyrimidine-2(1H)-thiones (DH-Pyr-S, 17-28) were designed and synthesized by the reaction of methoxy-substituted chalcones (1–14) with thiourea using solid-phase microwave method (MW) in view of the structural requirements as suggested in the pharmacophore model for tyrosinase inhibition (TI). Synthesized compounds were assessed for their in vitro TI potential and compounds 16, 17, and 21 exhibited notable tyrosinase inhibitory properties at the concentrations of 31.86 ± 2.45 µM, 44.58 ± 0.46 µM, and 48.47 ± 0.66 µM, respectively. Compounds (16, 17, and 21) were exhibited experimentally more potent TI than the standard used in terms of the IC50 value (Kojic acid, 55.38 ± 2.30 µM; p<0.0001). Additionally, DPPH activity of 15-28 were evaluated and compound 17 showed the moderate DPPH activity (45.64 ± 0.34%). Binding affinities of synthesized molecules to the tyrosinase catalytic core were further investigated through in silico molecular docking studies using AutoDock Vina (version 1.2.5), discovery studio accelyrs (BIOVIA, Dassault Systèmes) and predicting small-molecule pharmacokinetic properties using graph-based signatures (pkCSM) programs were used for ADMET calculations. Among synthesized compounds 15, 21, and 24 revealed high binding affinity to tyrosinase active site with lowest binding free energy (?G) values of -7.9 kcal/mol, thereby outperformed kojic acid affinity. In conclusion most modeling results were in agreement with their experimental data, suggesting the TI potential of lead compounds