OA@INAF - Istituto Nazionale di Astrofisica
Not a member yet
15494 research outputs found
Sort by
The SKARAB Board in the Framework of Single-Dish Radio Astronomy
The Square Kilometer Array Reconfigurable Application Board (SKARAB) is a Xilinx Virtex-7 FPGA-based platform designed for the MeerKAT array, to be used for both F- and X/B-engines. The MeerKAT F-engine receives digitized data, thus no samplers are required on the SKARAB-based platform. Among the alternative options available, a high-performing ADC mezzanine board can be used in conjunction with the SKARAB, which allows four 1.4-GHz-wide input channels to be digitized and processed. In this paper, we outline how the SKARAB has been successfully used for single-dish applications including imaging, spectroscopy, and spectro-polarimetry
A simple model for spectroscopic analyses of active stars
Spectroscopic analyses of young late-type stars suffer from systematic inaccuracies, typically underestimating metallicities but overestimating abundances of certain elements including oxygen and barium. Effects are stronger in younger and cooler stars, and recent evidence specifically indicates a connection to the level of chromospheric activity. We present here a two-component spectroscopic model representing a non-magnetic baseline plus a magnetic spot, and analyse the resulting synthetic spectra of young solar analogues using a standard spectroscopic technique. For a moderately active star with solar parameters and chromospheric activity index log R′HK=-4.3 (∼ 100 Myr), we predict that is underestimated by 0.06 dex while vmic is overestimated by 0.2 km s-1; for higher activity levels we predict effects as large as 0.2 dex and 0.7 km s-1. Predictions are in agreement with literature data on solar twins, and indicate that the model is a plausible explanation to the observed effects. The model is simple enough that it can be included in spectroscopic packages with only changes to the underlying spectrum synthesis modules, if a log R′HK value is provided
X-Ray Polarization of the Black Hole X-Ray Binary 4U 1630–47 Challenges the Standard Thin Accretion Disk Scenario
A large energy-dependent X-ray polarization degree is detected by the Imaging X-ray Polarimetry Explorer (IXPE) in the high-soft emission state of the black hole X-ray binary 4U 1630–47. The highly significant detection (at ≈50σ confidence level) of an unexpectedly high polarization, rising from ∼6% at 2 keV to ∼10% at 8 keV, cannot be easily reconciled with standard models of thin accretion disks. In this work, we compare the predictions of different theoretical models with the IXPE data and conclude that the observed polarization properties are compatible with a scenario in which matter accretes onto the black hole through a thin disk covered by a partially ionized atmosphere flowing away at mildly relativistic velocities
Hubble Space Telescope proper motions of Large Magellanic Cloud star clusters: I. Catalogues and results for NGC 1850
We present proper motion (PM) measurements for a sample of 23 massive star clusters within the Large Magellanic Cloud using multi-epoch data from the Hubble Space Telescope (HST). We combined archival data from the ACS/WFC and WFC3/UVIS instruments with observations from a dedicated HST programme, resulting in time baselines between 4.7 and 18.2 yr available for PM determinations. For bright well-measured stars, we achieved nominal PM precisions of 55 μas yr-1 down to 11 μas yr-1. To demonstrate the potential and limitations of our PM data set, we analysed the cluster NGC 1850 and showcase a selection of different science applications. The precision of the PM measurements allows us to disentangle the kinematics of the various stellar populations that are present in the HST field. The cluster has a centre-of-mass motion that is different from the surrounding old field stars and also differs from the mean motion of a close-by group of very young stars. We determined the velocity dispersion of field stars to be 0.128±0.003 mas yr-1 (corresponding to 30.3±0.7 km s-1). The velocity dispersion of the cluster inferred from the PM data set most probably overestimates the true value, suggesting that the precision of the measurements at this stage is not sufficient for a reliable analysis of the internal kinematics of extra-galactic star clusters. Finally, we exploit the PM-cleaned catalogue of likely cluster members to determine any radial segregation between fast and slowly-rotating stars, finding that the former are more centrally concentrated. With this paper, we also release the astro-photometric catalogues for each cluster
Magnetic Fields in Massive Star-forming Regions (MagMaR). IV. Tracing the Magnetic Fields in the O-type Protostellar System IRAS 16547–4247
The formation of the massive stars, and in particular, the role that the magnetic fields play in their early evolutionary phase is still far from being completely understood. Here, we present the Atacama Large Millimeter/submillimeter Array 1.2 mm full polarized continuum and H13CO+(3−2), CS(5−4), and HN13C(3−2) line observations with a high angular resolution (∼0.″4 or 1100 au). In the 1.2 mm continuum emission, we reveal a dusty envelope surrounding the massive protostars, IRAS16547-E and IRAS16547-W, with dimensions of ∼10,000 au. This envelope has a biconical structure likely carved by the powerful thermal radio jet present in region. The magnetic field vectors follow very well the biconical envelope. The polarization fraction is ∼2.0% in this region. Some of these vectors seem to converge to IRAS 16547-E and IRAS 16547-W, the most massive protostars. Moreover, the velocity fields revealed from the spectral lines H13CO+(3−2) and HN13C(3−2) show velocity gradients with a good correspondence with the magnetic fields, which maybe are tracing the cavities of molecular outflows or maybe infalling in some parts. We derived a magnetic field strength in some filamentary regions that goes from 2 to 6.1 mG. We also find that the CS(5−4) molecular line emission reveals multiple outflow cavities or bow shocks with different orientations, some of which seem to follow the NW-SE radio thermal jet
Astrochemical Diagnostics of the Isolated Massive Protostar G28.20-0.05
We study the astrochemical diagnostics of the isolated massive protostar G28.20-0.05. We analyze data from Atacama Large Millimeter/submillimeter Array 1.3 mm observations with a resolution of 0.″2 (∼1000 au). We detect emission from a wealth of species, including oxygen-bearing (e.g., H2CO, CH3OH, CH3OCH3), sulfur-bearing (SO2, H2S), and nitrogen-bearing (e.g., HNCO, NH2CHO, C2H3CN, C2H5CN) molecules. We discuss their spatial distributions, physical conditions, correlation between different species, and possible chemical origins. In the central region near the protostar, we identify three hot molecular cores (HMCs). HMC1 is part of a millimeter continuum ring-like structure, is closest in projection to the protostar, has the highest temperature of ∼300 K, and shows the most line-rich spectra. HMC2 is on the other side of the ring, has a temperature of ∼250 K, and is of intermediate chemical complexity. HMC3 is further away, ∼3000 au in projection, cooler (∼70 K), and is the least line-rich. The three HMCs have similar mass surface densities (∼10 g cm−2), number densities (n H ∼ 109 cm−3), and masses of a few solar masses. The total gas mass in the cores and in the region out to 3000 au is ∼25 M ⊙, which is comparable to that of the central protostar. Based on spatial distributions of peak line intensities as a function of excitation energy, we infer that the HMCs are externally heated by the protostar. We estimate column densities and abundances of the detected species and discuss the implications for hot core astrochemistry
High frequency Lunar Penetrating Radar quality control, editing and processing of Chang’E-4 lunar mission
Chinese lunar landing mission Chang’E-4 reached the far side of the Moon in January 2019 and has been providing unprecedented Lunar Penetrating Radar data able to explore the lunar subsurface down to more than 40 m (with its more resolutive high frequency band). Data are periodically released to the scientific community in raw PDS4 format. Here we provide different versions of the radar dataset after editing (i.e. pre-processing), partial, and full processing in order to provide a complete ready-to-use dataset to end-users (data collected since 4th January 2019 until 27th March 2023) which can be directly exploited for analysis, interpretation, inversion, as well as integration with imagery or other information. In particular, we implemented an efficient and objective way to remove duplicated traces representing more than 90% of original data, as well as a processing flow able to retain all the original data information, while avoiding redundancies. The provided datasets can be implemented with future data releases and straightforwardly exploited for any future analysis
CHEX-MATE: CLUster Multi-Probes in Three Dimensions (CLUMP-3D). I. Gas analysis method using X-ray and Sunyaev-Zel'dovich effect data
Galaxy clusters are the products of structure formation through myriad physical processes that affect their growth and evolution throughout cosmic history. As a result, the matter distribution within galaxy clusters, or their shape, is influenced by cosmology and astrophysical processes, in particular the accretion of new material due to gravity. We introduce an analysis method for investigating the three-dimensional triaxial shapes of galaxy clusters from the Cluster HEritage project with XMM-Newton - Mass Assembly and Thermodynamics at the Endpoint of structure formation (CHEX-MATE). In this paper, the first in a CHEX-MATE triaxial analysis series, we focus on utilizing X-ray data from XMM-Newton and Sunyaev-Zel'dovich (SZ) effect maps from Planck and the Atacama Cosmology Telescope to obtain a three-dimensional triaxial description of the intracluster medium (ICM) gas. We present the forward modeling formalism of our technique, which projects a triaxial ellipsoidal model for the gas density and pressure, to be compared directly with the observed two-dimensional distributions in X-rays and the SZ effect. A Markov chain Monte Carlo is used to estimate the posterior distributions of the model parameters. Using mock X-ray and SZ observations of a smooth model, we demonstrate that the method can reliably recover the true parameter values. In addition, we applied the analysis to reconstruct the gas shape from the observed data of one CHEX-MATE galaxy cluster, PSZ2 G313.33+61.13 (Abell 1689), to illustrate the technique. The inferred parameters are in agreement with previous analyses for the cluster, and our results indicate that the geometrical properties, including the axial ratios of the ICM distribution, are constrained to within a few percent. With a much better precision than previous studies, we thus further establish that Abell 1689 is significantly elongated along the line of sight, resulting in its exceptional gravitational lensing properties
Ultra-long-period Cepheids as Standard Candles from Gaia to Rubin-LSST
An analysis of the properties of ultra-long-period Cepheids (ULPs) could significantly contribute to understanding the Hubble constant tension, e.g., the current discrepancy between determinations based on local distance indicators and those relying on cosmic microwave background measurements. These highly luminous variables are observable beyond 100 Mpc, so if they were confirmed to behave as standard candles, they would allow us a direct measurement of cosmological distances without any secondary distance indicator, thus reducing potential systematic errors in the calibration of the cosmic distance scale. This paper presents an analysis of the largest known sample of 73 ULPs, including 15 objects in nearby galaxies, with new accurate and homogeneous photometry obtained by Gaia DR3, and a new object, in our Galaxy, identified as a long-period variable in Gaia DR3, but recently reclassified as a ULP. The obtained results suggest that, by improving photometric accuracy, the ULP period–Wesenheit relation shows a smaller dispersion than that obtained in literature and is in better agreement with the classical Cepheid (CC) one, supporting the hypothesis that ULPs are the extension of the CCs at higher period, mass, and luminosity. However, to reach this aim, it is necessary to enrich the sample with high-quality data. The Rubin Observatory Legacy Survey of Space and Time (Rubin-LSST) survey offers the possibility to achieve this thanks to its photometric characteristics and time extension. In particular, we will explore the capabilities of the Rubin-LSST survey to recover ULP theoretical light curves by using a new tool called PulsationStarRecovery, built by our group for this type of analysis...
GLADE: Gravitational Light-Bending Astrometry Dual-Satellite Experiment
Light bending is one of the classical tests of general relativity and is a crucial aspect to be taken into account for accurate assessments of photon propagation. In particular, high-precision astrometry can constrain theoretical models of gravitation in the weak field limit applicable to the Sun neighborhood. We propose a concept for experimental determination of the light deflection close to the Sun in the (Formula presented.) to (Formula presented.) range, in a modern rendition of the 1919 experiment by Dyson, Eddington and Davidson, using formation flying to generate an artificial long-lasting eclipse. The technology is going to be demonstrated by the forthcoming ESA mission PROBA3. The experimental setup includes two units separated by 150 m and aligned to the mm level: an occulter and a small telescope (0.3 m diameter) with an annular field of view covering a region (Formula presented.) from the Sun. The design is compatible with a space weather payload, merging several instruments for observation of the solar corona and environment. We discuss the measurement conditions and the expected performance