12064 research outputs found
Sort by
Mitigation and Adaptation Strategies for Different Urban Fabrics to Face Increasingly Hot Summer Days Due to Climate Change
Get PDFAs global warming and heat waves are becoming more frequent and severe, cities, with their different morphological districts, must be at the forefront of environmental challenges. Notably, many Mediterranean towns maintain the original medieval urban fabric and the regular one. The research focuses on the development of a methodology with the application of high-resolution 3D modelling software ENVI-met V5.1 to analyze the microclimatic effects of mitigation and adaptation strategies derived from the study of medieval and regular urban fabric. The aim is to address contemporary challenges such as heat waves and urban heat island (UHI) effects in modern cities. By studying outdoor energy behavior in a southern Italian city (Bari), the research proposes scenarios for urban settlements in the face of climate change. This approach provides recommendations for creating more climate-resilient urban environments both in the historic and modern city. The use of trees with large crowns and tall shrubs and the inclusion of fountain jets are strategies to achieve sky view factor and air temperatures in the modern city similar to those in the historical fabric. Increasing albedo values and the use of green roofs prove to be further strategies for improving outdoor climatic conditions
ICNIRP Statement on Short Wavelength Light Exposure from Indoor Artificial Sources and Human Health
No full textConcerns have been raised about the possibility of effects from exposure to short wavelength light (SWL), defined here as 380-550 nm, on human health. The spectral sensitivity of the human circadian timing system peaks at around 480 nm, much shorter than the peak sensitivity of daytime vision (i.e., 555 nm). Some experimental studies have demonstrated effects on the circadian timing system and on sleep from SWL exposure, especially when SWL exposure occurs in the evening or at night. The International Commission on Non-Ionizing Radiation Protection (ICNIRP) has identified a lack of consensus among public health officials regarding whether SWL from artificial sources disrupts circadian rhythm, and if so, whether SWL-disrupted circadian rhythm is associated with adverse health outcomes. Systematic reviews of studies designed to examine the effects of SWL on sleep and human health have shown conflicting results. There are many variables that can affect the outcome of these experimental studies. One of the main problems in earlier studies was the use of photometric quantities as a surrogate for SWL exposure. Additionally, the measurement of ambient light may not be an accurate measure of the amount of light impinging on the intrinsically photosensitive retinal ganglion cells, which are now known to play a major role in the human circadian timing system. Furthermore, epidemiological studies of long-term effects of chronic SWL exposure per se on human health are lacking. ICNIRP recommends that an analysis of data gaps be performed to delineate the types of studies needed, the parameters that should be addressed, and the methodology that should be applied in future studies so that a decision about the need for exposure guidelines can be made. In the meantime, ICNIRP supports some recommendations for how the quality of future studies might be improved
Data handling of CYGNO experiment using INFN-Cloud solution
No full textThe INFN Cloud project was launched at the beginning of 2020, aiming to build a distributed Cloud infrastructure and provide advanced services for the INFN scientific communities. A Platform as a Service (PaaS) was created inside INFN Cloud that allows the experiments to develop and access resources as a Software as a Service (SaaS), and CYGNO is the beta-tester of this system. The aim of the CYGNO experiment is to realize a large gaseous Time Projection Chamber based on the optical readout of the photons produced in the avalanche multiplication of ionization electrons in a GEM stack. To this extent, CYGNO exploits the progress in commercial scientific Active Pixel Sensors based on Scientific CMOS for Dark Matter search and Solar Neutrino studies. CYGNO, like many other astroparticle experiments, requires a computing model to acquire, store, simulate and analyze data typically far from High Energy Physics (HEP) experiments. Indeed, astroparticle experiments are typically characterized by being less demanding of computing resources with respect to HEP ones but have to deal with unique and unrepeatable data, sometimes collected in extreme conditions, with extensive use of templates and montecarlo, and are often re-calibrated and reconstructed many times for a given data set. Moreover, the varieties and the scale of computing models and requirements are extremely large. In this scenario, the Cloud infrastructure with standardized and optimized services offered to the scientific community could be a useful solution able to match the requirements of many small/medium size experiments. In this work, we will present the CYGNO computing model based on the INFN cloud infrastructure where the experiment software, easily extendible to similar experiments to similar applications on other similar experiments, provides tools as a service to store, archive, analyze, and simulate data
Scintillation Properties of CsPbBr3 Nanocrystals Prepared by Ligand-Assisted Reprecipitation and Dual Effect of Polyacrylate Encapsulation toward Scalable Ultrafast Radiation Detectors
No full textLead halide perovskite nanocrystals (LHP-NCs) embedded in polymeric hosts are gaining attention as scalable and low-cost scintillation detectors for technologically relevant applications. Despite rapid progress, little is currently known about the scintillation properties and stability of LHP-NCs prepared by the ligand assisted reprecipitation (LARP) method, which allows mass scalability at room temperature unmatched by any other type of nanostructure, and the implications of incorporating LHP-NCs into polyacrylate hosts are still largely debated. Here, we show that LARP-synthesized CsPbBr3 NCs are comparable to particles from hot-injection routes and unravel the dual effect of polyacrylate incorporation, where the partial degradation of LHP-NCs luminescence is counterbalanced by the passivation of electron-poor defects by the host acrylic groups. Experiments on NCs with tailored surface defects show that the balance between such antithetical effects of polymer embedding is determined by the surface defect density of the NCs and provide guidelines for further material optimization
A methodological framework for the implementation of urban living lab on circular economy co-design activities
No full textCircular Economy (CE) has the potential to tackle many of the challenges we are facing nowadays. It represents nothing less than a paradigm shift, as closing and shortening material loops means adopting completely new ways of producing and consuming. In the European Union, CE is a key strategy to achieve climate neutrality target by 2050, to face the biodiversity crisis, to guarantee economic growth and social wellbeing, within planet boundaries, in accordance with the UN Sustainable Development Goals. Stakeholders’ engagement is a crucial point of the transition pathway based on a systemic approach through a co-creation process. Urban areas are the main field of the circular transition process in which all the urban actors, i.e., public institutions, academic and research bodies, economic operators, citizens and civil organizations, are involved. An effective operational tool to realize stakeholders’ involvement and co-creation processes is the methodological approach of Urban Living Labs (ULLs). Although ULLs have already been tested and implemented worldwide, there is no description of a step-by-step methodology to implement ULLs aimed at co-creation of project ideas on CE, to be realized in a specific territory. This paper aims to define a methodological framework for implementing ULLs focused on co-designing CE activities. The proposed methodology is based on four main phases: (i) scouting and analysis of the territorial context, (ii) listening and exploration, (iii) participation, (iv) execution. A detailed description of each phase as well as the first application of this framework in different urban communities are presented
Coping with salinity stress: segmental group 7 chromosome introgressions from halophytic Thinopyrum species greatly enhance tolerance of recipient durum wheat
No full textIncreased soil salinization, tightly related to global warming and drought and exacerbated by intensified irrigation supply, implies highly detrimental effects on staple food crops such as wheat. The situation is particularly alarming for durum wheat (DW), better adapted to arid/semi-arid environments yet more sensitive to salt stress than bread wheat (BW). To enhance DW salinity tolerance, we resorted to chromosomally engineered materials with introgressions from allied halophytic Thinopyrum species. “Primary” recombinant lines (RLs), having portions of their 7AL arms distally replaced by 7el1L Th. ponticum segments, and “secondary” RLs, harboring Th. elongatum 7EL insertions “nested” into 7el1L segments, in addition to near-isogenic lines lacking any alien segment (CLs), cv. Om Rabia (OR) as salt tolerant control, and BW introgression lines with either most of 7el1 or the complete 7E chromosome substitution as additional CLs, were subjected to moderate (100 mM) and intense (200 mM) salt (NaCl) stress at early growth stages. The applied stress altered cell cycle progression, determining a general increase of cells in G1 and a reduction in S phase. Assessment of morpho-physiological and biochemical traits overall showed that the presence of Thinopyrum spp. segments was associated with considerably increased salinity tolerance versus its absence. For relative water content, Na+ accumulation and K+ retention in roots and leaves, oxidative stress indicators (malondialdehyde and hydrogen peroxide) and antioxidant enzyme activities, the observed differences between stressed and unstressed RLs versus CLs was of similar magnitude in “primary” and “secondary” types, suggesting that tolerance factors might reside in defined 7el1L shared portion(s). Nonetheless, the incremental contribution of 7EL segments emerged in various instances, greatly mitigating the effects of salt stress on root and leaf growth and on the quantity of photosynthetic pigments, boosting accumulation of compatible solutes and minimizing the decrease of a powerful antioxidant like ascorbate. The seemingly synergistic effect of 7el1L + 7EL segments/genes made “secondary” RLs able to often exceed cv. OR and equal or better perform than BW lines. Thus, transfer of a suite of genes from halophytic germplasm by use of fine chromosome engineering strategies may well be the way forward to enhance salinity tolerance of glycophytes, even the sensitive DW
Validation of photosynthetically active radiation by OLCI on Sentinel-3 against ground-based measurements in the central Mediterranean and possible aerosol effects
No full textInstantaneous determinations of photosynthetically active radiation (PAR) over the sea from the Ocean and Land Color Instrument (OLCI) on Sentinel-3 are compared with in-situ measurements at the island of Lampedusa in the central Mediterranean Sea. Radiative transfer calculations show that the PAR measured at the island site is representative for open ocean conditions. Satellite data show a good agreement (5.2% positive bias, R2 = 0.97) with in-situ data, in line with similar analyses for other satellite sensors. Larger satellite-in situ differences are found during summer, and the possible role of aerosols in degrading PAR estimate has been investigated by comparing AOD values measured at Lampedusa and derived by OLCI. The relative difference between OLCI and in-situ PAR appears to be negatively correlated with the relative differences between OLCI and in-situ AOD, suggesting that a more accurate determination of AOD, in particular, for cases with AOD > 0.2, mostly related to Saharan dust, may lead to improved satellite PAR estimates
Plant-Produced Viral Nanoparticles as a Functionalized Catalytic Support for Metabolic Engineering
No full textSubstrate channeling could be very useful for plant metabolic engineering; hence, we propose that functionalized supramolecular self-assembly scaffolds can act as enzymatic hubs able to perform reactions in close contiguity. Virus nanoparticles (VNPs) offer an opportunity in this context, and we present a functionalization strategy to display different enzymes on the outer surface of three different VNPs produced in plants. Tomato bushy stunt virus (TBSV) and Potato virus X (PVX) plant viruses were functionalized by the genetic fusion of the E-coil peptide coding sequence to their respective coat proteins genes, while the enzyme lichenase was tagged with the K-coil peptide. Immobilized E-coil VNPs were able to interact in vitro with the plant-produced functionalized lichenase, and catalysis was demonstrated by employing a lichenase assay. To prove this concept in planta, the Hepatitis B core (HBc) virus-like particles (VLPs) were similarly functionalized by genetic fusion with the E-coil sequence, while acyl-activating enzyme 1, olivetolic acid synthase, and olivetolic acid cyclase enzymes were tagged with the K-coil. The transient co-expression of the K-coil-enzymes together with E-coil-VLPs allowed the establishment of the heterologous cannabinoid precursor biosynthetic pathway. Noteworthy, a significantly higher yield of olivetolic acid glucoside was achieved when the scaffold E-coil-VLPs were employed
Industrial Qualification of the THALES TH1509U European 170 GHz 1 MW CW Gyrotron
No full textThe progress of the European THALES TH1509U 170 GHz 1 MW CW industrial gyrotron program is presented in this report. The test results on the upgraded TH1509U and the compliance with main technical requirements are discussed
Structure and dynamics of Li1.24K0.76CO3 molten carbonate electrolyte from molecular simulations with explicit polarization
Get PDFMolten carbonate electrolysis cells represent a key technology for harnessing surplus energy from renewable sources and converting it into gaseous energy carriers. To optimize their efficiency, a comprehensive understanding of each step in the operational process is essential. Here, we focus on the electrolyte of choice in molten carbonate cells: the Li1.24K0.76CO3 melt. Utilizing molecular dynamics with explicit polarization, we demonstrate that the structure of this molten mixture is characterized by a dense network of lithium-carbonate complexes, with K+ ions loosely embedded within this network. This structural insight enables us to rationalize from an atomistic perspective the conductivity trends observed experimentally in molten carbonates. Moreover, our work highlights the importance of including polarization for the simulations of dense liquid carbonates. It also acts as a foundational step towards more advanced theoretical studies for elucidating the role of the electrolyte in these devices