12064 research outputs found
Sort by
Life Cycle Assessment of Electricity Production from Different Biomass Sources in Italy
Get PDFThe European Union is targeting climate neutrality by 2050, with a focus on enhancing energy efficiency, expanding renewable energy sources, and reducing emissions. Within Italy’s electricity mix, bioenergy sources, namely biogas, solid biomass, and bioliquids, play a crucial territorial role. A comparative analysis was conducted through Life Cycle Assessment (LCA), utilizing national data from the ARCADIA project, to assess the environmental sustainability of the investigated bioenergy chains and identify the most convenient ones. The study revealed that, among the bioenergy sources, solid biomass emerges as the most environmentally friendly option since it does not rely on dedicated crops. Conversely, biogas shows the highest environmental impact, demonstrating less favorable performance across nine out of the sixteen evaluated impact categories. The LCA underscores that the cultivation of dedicated energy crops significantly contributes to environmental burdens associated with electricity generation, affecting both biogas and bioliquids performance. The cultivation process needs water and chemical fertilizers, leading to adverse environmental effects. These findings highlight the importance of prioritizing residual biomass for energy generation over dedicated crops. Utilizing forestry and agro-industrial residues, municipal solid waste, and used cooking oils presents numerous advantages, including environmental preservation, resource conservation and recovery, as well as waste reduction
Measurements of the absolute gamma-ray emission intensities from the decay of 166Ho
Get PDF166Ho (T1/2 ≈ 26.8 h) is an emerging theragnostic radionuclide of interest in nuclear medicine due to its peculiar decay scheme, featuring high-energy β− emission (≈ 1.8 MeV) coupled with the main gamma-ray emission (≈ 80.6 keV). Using the new 166Ho activity standard and the well-calibrated, high-energy resolution HPGe detector, both available at ENEA-INMRI, a new determination of several 166Ho gamma-ray emission intensities, Iγ, was performed with low uncertainty. The new Iγ values contributed to the Decay Data Evaluation Project
Comparison of Transcranial Magnetic Stimulation Dosimetry between Structured and Unstructured Grids Using Different Solvers
Get PDFIn recent years, the interest in transcranial magnetic stimulation (TMS) has surged, necessitating deeper understanding, development, and use of low-frequency (LF) numerical dosimetry for TMS studies. While various ad hoc dosimetric models exist, commercial software tools like SimNIBS v4.0 and Sim4Life v7.2.4 are preferred for their user-friendliness and versatility. SimNIBS utilizes unstructured tetrahedral mesh models, while Sim4Life employs voxel-based models on a structured grid, both evaluating induced electric fields using the finite element method (FEM) with different numerical solvers. Past studies primarily focused on uniform exposures and voxelized models, lacking realism. Our study compares these LF solvers across simplified and realistic anatomical models to assess their accuracy in evaluating induced electric fields. We examined three scenarios: a single-shell sphere, a sphere with an orthogonal slab, and a MRI-derived head model. The comparison revealed small discrepancies in induced electric fields, mainly in regions of low field intensity. Overall, the differences were contained (below 2% for spherical models and below 12% for the head model), showcasing the potential of computational tools in advancing exposure assessment required for TMS protocols in different bio-medical applications
Energy Potential of Existing Reversible Air-to-Air Heat Pumps for Residential Heating
Get PDFHeat pumps can be considered one of the key technologies to meet the building stock decarbonization target set by Europe. Especially in warm locations, many households have already incurred costs for the installation of air-to-air heat pumps, but, in most cases, they only use them in summer for cooling, while heating is provided by fuel-fired boilers. For these households, the goal of reducing primary energy consumption could be achieved almost cost-free by using heat pumps, that were installed for summer cooling, also for winter heating. Based on this assumption, this research aimed to evaluate the energy savings and environmental benefits that can be achieved by using air-to-air heat pumps instead of gas boilers as the main heating system, without additional costs except for the installation of electric radiators in bathrooms. To quantify variations in energy, environmental, and economic savings compared to the baseline condition, detailed simulations were conducted with the dynamic hourly calculation method (EN ISO 52016) in six different European locations, considering heat pumps with different efficiencies and two different building types. The analysis showed positive impacts at all sites due to the use of heat pumps, which can lead to primary energy savings ranging from about 20% to about 60%. The results varied according to outdoor climate, coefficient of performance of heat pumps, building type, and, on the economic side, the cost of energy. This research provides useful results for outlining decarbonization scenarios, assuming that heat pumps are one of the technologies needed to meet the EU’s climate neutrality goal
Hydrographic vs. Dynamic Description of a Basin: The Example of Baroclinic Motion in the Ionian Sea
Get PDFThe Ionian Sea is a crucial intersection for various water masses in the Mediterranean. Its hydrography and dynamics play a significant role in the seawater budgets and biogeochemistry of the neighboring sub-basins. Multiple theories have been formulated to gain a better understanding of the Ionian dynamics. These theories primarily attribute the variability of the near-surface Ionian circulation to internal processes. Here, we utilize horizontal currents and temperature–salinity profiles from the Copernicus reanalysis to examine the contribution of baroclinic modes to the variability of the basin horizontal circulation. Our findings demonstrate that, although the basin vertical structure is characterized by three layers, the primary patterns of the Ionian circulation can be attributed to the first baroclinic mode. This mode, along with the barotropic mode, accounts for over 85% of the overall variability in the Ionian circulation, suggesting that only one of the three interfaces separating the different water masses in the basin is dynamically active. We estimate the depth of this interface to be about 490 m. Additionally, our analysis shows that more than 90% of the kinetic energy over the water column is localized above this interface, indicating that the deep layer of the Ionian is dynamically nearly inert
Fire scenario in a nuclear medicine department: an impact assessment
No full textNuclear medicine uses radioactive compounds, called radiopharmaceuticals, for diagnosis, staging of disease, therapy and monitoring the response of a disease process. An accident involving both fire and radioactive materials has the potential to develop into a critical situation with dual risks: fire damage and the potential release of radioactive materials. The objective of this work is twofold. Firstly, it attempts to model the fire progression in a nuclear medicine facility using the well-established natural temperature–time curves proposed by the Eurocode. The second objective is to investigate how radioactive materials spread in the atmosphere after the fire, with the primary aim of evaluating the possible effects of airborne radionuclides on nearby residents and first responders who come to the scene of the accident. From the analysis conducted, key findings emerge: (I) the risk of fire in a nuclear medicine department can be considered to be low/moderate and a fire accident would likely result in a controllable and manageable scenario. (II) Additional risks that directly affect the radioactive material could arise in addition to the fire event. As a result of the high concentration of radioactive material, the radiopharmacy and the radioactive storage room are the locations that pose the highest risk. (III) According to the results of this research, the highest temperatures that could be reached during a fire, combined with effective and timely fire control, would result in a limited release of radioactive substances into the environment, with a modest impact on workers and nearby residents
Optimizing Thermal Energy Sharing in Smart District Heating Networks
No full textThe constant attention to sustainability aimed at reconciling economic and social development with environmental protection is the driving force of the continuous growth of renewable energy in the energy sector. Among the numerous actions taken by the European Commission (EC) in this direction, an important initiative towards the complete decarbonization is represented by the Renewable Energy Communities (RECs). According to the EC, “energy communities enable collective and citizen-driven energy actions to support the clean energy transition. They can contribute to increasing public acceptance of renewable energy projects and make it easier to attract private investments in the clean energy transition”. At the European level, numerous energy communities are emerging, although they are all based on photovoltaic production and, consequently, focus only on electricity flows. The aim of this paper is to define a thermal energy community in which thermal energy sharing can be achieved by exploiting the concept of the smart district heating network. Starting from a small existing district heating network, its conversion into a smart one will be analyzed and optimized with the aim of studying the sharing of thermal energy between the various prosumer and non-prosumer users connected to the district heating network
Evaluation of Energy Performance Indicators and Energy Saving Opportunities for the Italian Rubber Manufacturing Industry
Get PDFThe objective of this work is the energy characterisation and evaluation of the energy efficiency potential of the rubber manufacturing industry in Italy, exploiting the detailed data included in energy audits by large and energy-intensive companies. This sector is divided into two sub-activities: the manufacture of rubber products and the production of tyres. Existing studies are focused mainly on tyre production, and there is a lack of quantitative evaluation of energy indicators that can provide guidance for improving process efficiency. In this work, updated global and specific energy performance indicators (EnPIs) related to the production process and to the auxiliary and general services are defined and evaluated. At the same time, targeted actions and interventions to improve the energy efficiency of the sector are analysed, showing the role of different intervention areas and their cost-effectiveness. The analysis is based on 100 Italian mandatory energy audits of the sector collected according to Art.8 EU Directive 27/2012. The applied methodology made it possible to calculate specific energy performance indicators by considering the overall and sub-process energy consumption of different production sites. Based on a detailed database containing real data from recent energy audits, this study provides an up-to-date and reliable benchmark for the rubber industry sector. In addition, the analysis of energy audits allows the identification of the most effective energy efficiency interventions for the rubber industry in terms of cost-effectiveness and payback time
Benthic Foraminifera as Proxies of Paleoenvironmental Changes in the Sant’Elia-Foxi Canyon (Gulf of Cagliari, Italy, Western Tyrrhenian Sea)
No full textMarine coastal areas are highly dynamic and fragile environments characterised by a complex interplay of biological, physical, and chemical factors. These areas are also affected by anthropogenic activities with the discharge of organic and inorganic contaminants that alters the quality of the environment. In this work, the effects of anthropogenic activities (i.e., urban and industrial development) on benthic foraminifera have been investigated along the A2TM core collected from the Sant’Elia-Foxi Canyon (Gulf of Cagliari, Sardinia—western Tyrrhenian Sea). The Gulf of Cagliari has experienced intense urbanisation since the beginning of the twentieth century with the establishment of petrochemical complexes and harbour activities. The A2TM core, dating from 1907 to 2013, was analysed with an integrated approach that includes grain size, organic matter, and benthic foraminifera characterisation compared with geochemical characterisation. The variations in the composition of the benthic foraminiferal assemblages and the Margalef diversity index are related to the altered environmental conditions that reflect the historical development of the area and to the land-based activities surrounding the Gulf of Cagliari. The statistical analysis identifies two main intervals (i.e., the years 1907–1986 and 1986–2013) that are typified by different benthic foraminiferal assemblages and diversity values. Accordingly, the increases in organic matter content and both organic and inorganic contaminants are well mirrored by a major drop in foraminiferal diversity after 1973 and a major foraminiferal turnover after 1989. The composition of the benthic foraminiferal assemblages in the uppermost part of the core (i.e., 1989–2013) might suggest a lowering of the oxygen availability at the seafloor. These changes might be related to the increase in organic matter and the silty fraction in the same interval likely triggered by damming on land and wetland reclamation
Subchannel Analysis of LFR Wire-Wrapped Fuel Bundle with RELAP5-3D
No full textA computational campaign was carried out at the Department of Astronautical, Electrical and Energy Engineering of Sapienza University of Rome aiming at the assessment of RELAP5-3D© capabilities for subchannel analysis. More specifically, the investigation involved a lead-bismuth-eutectic–cooled wire-spaced fuel pin bundle and compared simulation outcomes with experimental data coming from the NAtural CIrculation Experiment-Upgraded (NACIE-UP) facility, hosted at ENEA Brasimone Research Center. Thermal-hydraulic nodalization of the facility was developed with detailed subchannel modeling of the fuel pin simulator (FPS). Three different methodologies for the subchannel simulation were investigated, increasing step by step the complexity of the thermal-hydraulic model. In the simplest approach, the subchannels were modeled one by one. In addition, mass transfer between them was considered thanks to multiple cross junction components, realizing the hydraulic connection between adjacent subchannels. In this case, mass transfer depends on the pressure gradient and hydraulic resistance only, ignoring the turbulent mixing promoted by the wire-wrapped subassembly. Simulation results were not satisfactory, and an improvement was introduced in the second approach. In this case, several control variables calculate at each time step the energy transfer between adjacent control volumes associated with the turbulent mixing induced by the wires. This energy is transferred using ad hoc heat structures (HSs), where the boundary conditions are calculated by the control variables. The present model highlighted good capabilities in the prediction of the radial temperature distribution within the FPS, considerably reducing disagreement with experimental data. Finally, the influence of radial conduction within the fluid domain was assessed, introducing further HSs. Although this most complex model provided the best estimation of the experimental acquisition, the improvements given by radial conduction were not so relevant to justify the correspondent increase of the computational cost