Ruhr-Universität Bochum (RUB): Open Journal Systems
Not a member yet
4280 research outputs found
Sort by
Small Stretch Problem of the DCT Scheme and How to Fix It
No full textDCT is a beyond-birthday-bound (BBB) deterministic authenticated encryption (DAE) mode proposed by Forler et al. in ACISP 2016, ensuring integrity by redundancy. The instantiation of DCT employs the BRW polynomial, which is more efficient than the usual polynomial in GCM by reducing half of the multiplication operations. However, we show that DCT suffers from a small stretch problem similar to GCM. When the stretch length τ is small, choosing a special m-block message, we can reduce the number of queries required by a successful forgery to O(2τ/m). We emphasize that this attack efficiently balances space and time complexity but does not contradict the security bounds of DCT. Finally, we propose an improved scheme named Robust DCT (RDCT) with a minor change to DCT, which improves the security when τ is small and makes it resist the above attack
Tightening Leakage Resilience of the Suffix Keyed Sponge
No full textLightweight cryptographic constructions are often optimized on multiple aspects that put the security bounds to the limit. In this respect, it is important to obtain security bounds that are tight and give an accurate and exact indication of the generic security. However, whereas for black-box security bounds it has become common practice to argue tightness of security bounds, for leakage resilience security bounds this is not the case. This is unfortunate, as for leakage resilience results, tightness is even more important as there is already a lossiness incurred in capturing the actual leakage by a theoretical model in the first place.In this work, we consider the SuKS (Suffix Keyed Sponge) PRF construction and investigate tightness of the leakage resilience bound of Dobraunig and Mennink (ToSC 2019). We observe that, although their black-box security result is tight, their leakage resilience bound is not tight in their bounded leakage term λ. We observe that this is caused by the fact that parts of the security bound contain a term covering multicollisions and a term covering leakage, but an adversary is unable to combine both. We next consider improved security of the SuKS for two types of leakage: fixed position leakage, where the adversary directly learns the value of λ bits of a secret state, and Hamming weight leakage, where the Hamming weight of a fixed part of the state is leaked. For fixed position leakage, a very generous form of bounded leakage, we improve the original bound by making wise use of the multicollision limit function of Daemen et al. (ASIACRYPT 2017). For the more realistic setting of Hamming weight leakage, we structurally revisit the multicollision limit function analysis by including Hamming weight in the computation, a problem that is difficult on its own due to the non-uniform character of this type of leakage. In both cases, we improve and tighten the leakage resilience bound of Dobraunig and Mennink. The improved bound for the SuKS has immediate consequences for the leakage resilience of the NIST lightweight cryptography competition finalist ISAP v2, an authenticated encryption scheme that uses the SuKS internally
Reconstructing S-Boxes from Cryptographic Tables with Milp
No full textReconstructing an S-box from a cryptographic table such as difference distribution table (DDT), linear approximation table (LAT), differential-linear connectivity table (DLCT) or boomerang connectivity table (BCT) is one of the fundamental problems in symmetric-key cryptography. Till now, there are only very few known methods which can reconstruct an S-box from a given table: guess-and-determine algorithms of Boura et al. (DCC 2019) and Tian et al. (DCC 2020), sign determination algorithm of Dunkelman et al. (ToSC 2019) and STP based approach of Lu et al. (DCC 2022). In this paper we consider the reconstruction problem in an even more challenging setup where one needs to reconstruct S-boxes from a partial cryptographic table. We are able to reconstruct S-boxes when only a few number of rows of a cryptographic table is given. This problem has never been studied in the literature. We apply mixed integer linear programming (MILP) as the key tool for solving this problem. Needless to say that we can solve the reconstruction problem when the full table is given and this is the first ever application of MILP tool in solving such fundamental problems. As a further application of our method, we provide the generic MILP models which can search for S-boxes with a given cryptographic property such as differential uniformity, linearity, differential-linear uniformity or boomerang uniformity. Additionally, our method can recover a Boolean function from a given Walsh spectrum or a Boolean function with a given nonlinearity. We also introduce a new heuristic called Optimistic MILP objective that guides the model towards obtaining multiple S-boxes or Boolean functions with the same cryptographic property. We give detailed experimental results for up to 6-bit S-boxes showing the effectiveness of our technique
Single trace HQC shared key recovery with SASCA
No full textThis paper presents practicable single trace attacks against the Hamming Quasi-Cyclic (HQC) Key Encapsulation Mechanism. These attacks are the first Soft Analytical Side-Channel Attacks (SASCA) against code-based cryptography. We mount SASCA based on Belief Propagation (BP) on several steps of HQC’s decapsulation process. Firstly, we target the Reed-Solomon (RS) decoder involved in the HQC publicly known code. We perform simulated attacks under Hamming weight leakage model, and reach excellent accuracies (superior to 0.9) up to a high noise level (σ = 3), thanks to a re-decoding strategy. In a real case attack scenario, on a STM32F407, this attack leads to a perfect success rate. Secondly, we conduct an analogous attack against the RS encoder used during the re-encryption step required by the Fujisaki-Okamoto-like transform. Both in simulation and practical instances, results are satisfactory and this attack represents a threat to the security of HQC. Finally, we analyze the strength of countermeasures based on masking and shuffling strategies. In line with previous SASCA literature targeting Kyber, we show that masking HQC is a limited countermeasure against BP attacks, as well as shuffling countermeasures adapted from Kyber. We evaluate the “full shuffling” strategy which thwarts our attack by introducing sufficient combinatorial complexity. Eventually, we highlight the difficulty of protecting the current RS encoder with a shuffling strategy. A possible countermeasure would be to consider another encoding algorithm for the scheme to support a full shuffling. Since the encoding subroutine is only a small part of the implementation, it would come at a small cost
High-Performance Hardware Implementation of MPCitH and Picnic3
No full textPicnic is a post-quantum digital signature, the security of which relies solely on symmetric-key primitives such as block ciphers and hash functions instead of number theoretic assumptions. One of the main concerns of Picnic is the large signature size. Although Katz et al.’s protocol (MPCitH-PP) significantly reduces the size of Picnic, the involvement of more parties in MPCitH-PP leads to longer signing/verification times and more hardware resources. This poses new challenges for implementing high-performance Picnic on resource-constrained FPGAs. So far as we know, current works on the hardware implementation of MPCitH-based signatures are compatible with 3 parties only. In this work, we investigate the optimization of the implementation of MPCitH-PP and successfully deploying MPCitH-PP with more than three parties on resource-constrained FPGAs, e.g., Xilinx Artix-7 and Kintex-7, for the first time. In particular, we propose a series of optimizations, which include pipelining and parallel optimization for MPCitH-PP and the optimization of the underlying symmetric primitives. Besides, we make a slight modification to the computation of the offline commitment, which can further reduce the number of computations of Keccak. These optimizations significantly improve the hardware performance of Picnic3. Signing messages on our FPGA takes 0.047 ms for the L1 security level, outperforming Picnic1 with hardware by a factor of about 5.3, which is the fastest implementation of post-quantum signatures as far as we know. Our FPGA implementation for the L5 security level takes 0.146 ms beating Picnic1 by a factor of 8.5, and outperforming Sphincs by a factor of 17.3
Efficient ASIC Architecture for Low Latency Classic McEliece Decoding
No full textPost-quantum cryptography addresses the increasing threat that quantum computing poses to modern communication systems. Among the available “quantum-resistant” systems, the Classic McEliece key encapsulation mechanism (KEM) is positioned as a conservative choice with strong security guarantees. Building upon the code-based Niederreiter cryptosystem, this KEM enables high performance encapsulation and decapsulation and is thus ideally suited for applications such as the acceleration of server workloads. However, until now, no ASIC architecture is available for low latency computation of Classic McEliece operations. Therefore, the present work targets the design, implementation and optimization of a tailored ASIC architecture for low latency Classic McEliece decoding. An efficient ASIC design is proposed, which was implemented and manufactured in a 22 nm FDSOI CMOS technology node. We also introduce a novel inversionless architecture for the computation of error-locator polynomials as well as a systolic array for combined syndrome computation and polynomial evaluation. With these approaches, the associated optimized architecture improves the latency of computing error-locator polynomials by 47% and the overall decoding latency by 27% compared to a state-of-the-art reference, while requiring only 25% of the area
A Low-Latency High-Order Arithmetic to Boolean Masking Conversion
No full textMasking, an effective countermeasure against side-channel attacks, is commonly applied in modern cryptographic implementations. Considering cryptographic algorithms that utilize both Boolean and arithmetic masking, the conversion algorithm between arithmetic masking and Boolean masking is required. Conventional high-order arithmetic masking to Boolean masking conversion algorithms based on Boolean circuits suffer from performance overhead, especially in terms of hardware implementation. In this work, we analyze high latency for the conversion and propose an improved high-order A2B conversion algorithm. For the conversion of 16-bit variables, the hardware latency can be reduced by 47% in the best scenario. For the case study of second-order 32-bit conversion, the implementation results show that the improved scheme reduces the clock cycle latency by 42% in hardware and achieves a 30% speed performance improvement in software. Theoretically, a security proof of arbitrary order is provided for the proposed high-order A2B conversion. Experimental validations are performed to verify the second-order DPA resistance of second-order implementation. The Test Vector Leakage Assessment does not observe side-channel leakage for hardware and software implementations
Carry Your Fault: A Fault Propagation Attack on Side-Channel Protected LWE-based KEM
No full textPost-quantum cryptographic (PQC) algorithms, especially those based on the learning with errors (LWE) problem, have been subjected to several physical attacks in the recent past. Although the attacks broadly belong to two classes – passive side-channel attacks and active fault attacks, the attack strategies vary significantly due to the inherent complexities of such algorithms. Exploring further attack surfaces is, therefore, an important step for eventually securing the deployment of these algorithms. Also, it is mportant to test the robustness of the already proposed countermeasures in this regard. In this work, we propose a new fault attack on side-channel secure masked implementation of LWE-based key-encapsulation mechanisms (KEMs) exploiting fault propagation. The attack typically originates due to an algorithmic modification widely used to enable masking, namely the Arithmetic-to-Boolean (A2B) conversion. We exploit the data dependency of the adder carry chain in A2B and extract sensitive information, albeit masking (of arbitrary order) being present. As a practical demonstration of the exploitability of this information leakage, we show key recovery attacks of Kyber, although the leakage also exists for other schemes like Saber. The attack on Kyber targets the decapsulation module and utilizes Belief Propagation (BP) for key recovery. To the best of our knowledge, it is the first attack exploiting an algorithmic component introduced to ease masking rather than only exploiting the randomness introduced by masking to obtain desired faults (as done by Delvaux [Del22]). Finally, we performed both simulated and electromagnetic (EM) fault-based practical validation of the attack for an open-source first-order secure Kyber implementation running on an STM32 platform
Optimized Homomorphic Evaluation of Boolean Functions
No full textWe propose a new framework to homomorphically evaluate Boolean functions using the Torus Fully Homomorphic Encryption (TFHE) scheme. Compared to previous approaches focusing on Boolean gates, our technique can evaluate more complex Boolean functions with several inputs using a single bootstrapping. This allows us to greatly reduce the number of bootstrapping operations necessary to evaluate a Boolean circuit compared to previous works, thus achieving significant improvements in terms of performances. We define theoretically our approach which consists in adding an intermediate homomorphic layer between the plain Boolean space and the ciphertext space. This layer relies on so-called p-encodings embedding bits into Zp. We analyze the properties of these encodings to enable the evaluation of a given Boolean function and provide a deterministic algorithm (as well as an efficient heuristic) to find valid sets of encodings for a given function. We also propose a method to decompose any Boolean circuit into Boolean functions which are efficiently evaluable using our approach. We apply our framework to homomorphically evaluate various cryptographic primitives, and in particular the AES cipher. Our implementation results show significant improvements compared to the state of the art
Polynomial sharings on two secrets: Buy one, get one free
No full textWhile passive side-channel attacks and active fault attacks have been studied intensively in the last few decades, strong attackers combining these attacks have only been studied relatively recently. Due to its simplicity, most countermeasures against passive attacks are based on additive sharing. Unfortunately, extending these countermeasures against faults often leads to quite a significant performance penalty, either due to the use of expensive cryptographic operations or a large number of shares due to massive duplication. Just recently, Berndt, Eisenbarth, Gourjon, Faust, Orlt, and Seker thus proposed to use polynomial sharing against combined attackers (CRYPTO 2023). While they construct gadgets secure against combined attackers using only a linear number of shares, the overhead introduced might still be too large for practical scenarios.In this work, we show how the overhead of nearly all known constructions using polynomial sharing can be reduced by nearly half by embedding two secrets in the coefficients of one polynomial at the expense of increasing the degree of the polynomial by one. We present a very general framework that allows adapting these constructions to this new sharing scheme and prove the security of this approach against purely passive side-channel attacks, purely active fault attacks, and combined attacks. Furthermore, we present new gadgets allowing us to operate upon the different secrets in a number of useful ways