JEOS:RP - Journal of the European Optical Society Rapid publications
Not a member yet
545 research outputs found
Sort by
Theoretical investigation on the scale factor of a triple ring cavity to be used in frequency sensitive resonant gyroscopes
Get PDFIn this paper we study a multi-ring resonant structure including three evanescently coupled ring resonators (named triple ring resonator,TRR), with different ring radii and coupling coefficients, and coupled to two bus waveguides. The potential application of a TRR as a rotationsensor is analyzed and its advantages over a single ring resonator (SRR) under rotation conditions are also highlighted. When the coupledrings have different size and their inter-ring coupling coefficients are lower than the ring-bus coupling coefficients, the resonance frequencydifference between two counter-propagating beams induced by rotation is enhanced with respect to that of a single ring resonator (SRR)with the same footprint. The scale factor of the rotating TRR, which depends on the structural parameters (i.e. inter-ring and ring-buscoupling coefficients, lengths of the rings, overall propagation loss within the rings), is up to 1.88 times the value of the scale factor of aSRR, which depends only on the ring radius, by assuming that the waveguide structure in both configurations is the same. This promisingnumerical achievement results in a reduction of the sensor footprint of about two times, with respect to a single ring with the same scalefactor. The results obtained may be useful to define new configurations of frequency sensitive optical gyros in low-loss technology, havinga small volume. In fact, by properly choosing the structural parameters, the spectral response of the TRR is forced to assume a shape moresensitive to the resonant frequency shift due to the rotation with respect to that one of a SRR
Evidence for the Double Excimer State of conjugated polymer in a liquid solution
Get PDFIn this paper, the spectral properties of a conjugated polymer poly [2-methoxy-5-(2-ethylhexyloxy)-1, 4-phenylenevinylene] (MEH-PPV) in benzene have been studied. The results showed that the fluorescence spectra of MEH-PPV under low concentrations had two peaks; the dominant one due to monomer was around 560 nm, and the shoulder one attributed to the excimer was around 600 nm. Under higher concentrations, it was found that there was only one band around 600 nm due to the excimeric state. By increasing the concentrations of MEH-PPV, it could be seen that there was a new band around 640nm. This band is being attributed to the double excimer. Under high power pulsed laser excitation, we observed amplified spontaneous emission (ASE) at 570 nm, 605 nm and 650 nm. These ASE peaks could arise from the monomer, excimer and double excimer states of the macromolecule respectively. To the best of our knowledge this is perhaps the first report on ASE from double excimer of the conjugated polymer, MEH-PPV in liquid solution
Holographic superresolution using spatial light modulator
Get PDFThis paper describes a technique of superresolution using a reflective mode spatial light modulator, a coherent source of light, and a transmission mode object placed in the input plane of an imaging system, in particular we are using for the demonstration a 4f system. The spatial light modulator (SLM) enables for creating tilted plane wave illumination and it also permits adding constant phases of 0, π/2, 3π/2 and π. The angle of illumination created by the SLM is defined according to the dimension of aperture placed at the Fourier plane of 4f optical system. For each defined angle of illumination created by the SLM four holograms corresponding to the transmission mode object are recorded. This system is capable of retrieving phase and amplitude information of the images, corresponding to each impinging illumination. By simply adding these complex images a super resolved image is obtained
Radiative properties of carriers in CdSe-CdS core-shell heterostructured nanocrystals of various geometries
Get PDFWe report a model on core-shell heterostructured nanocrystals with CdSe as the core and CdS as the shell. The model is based on one-band Schrödinger equation. Three different geometries, nanodot, nanorod, and nanobone, are implemented. The carrier localization regimes with these structures are simulated, compared, and analyzed. Based on the electron and hole wave functions, the carrier overlap integral that has a great impact on stimulated emission is further investigated numerically by a novel approach. Furthermore, the relation between the nanocrystal size and electron-hole recombination energy is also examined
Overview of techniques applicable to self-interference incoherent digital holography
Get PDFSelf-interference incoherent digital holography (SIDH) retrieves the complex hologram from the object illuminated by the incoherent light. Supported by the adaptive optic feature, SIDH is readily applicable to the ocular imaging to investigate the human retinal cells. Considering the practical issues, issues related to resolution, phase-shifting, and contrast should be addressed to implement the viable SIDH system which is capable of recording the holographic information of human retinal cells under the incoherent illumination. Super resolution image reconstruction technique can be directly applied to SIDH to enhance the resolution of the system without any change of configuration. We present the improved way to incorporate the phase-shifting itself into the lateral shift required by the super resolution technique. To deal with the phase-shifting issue, we present an arbitrary phase shift retrieval algorithm which can reduce the number of phase-shift and accept the blind phase-shift. The single-shot imaging is also possible by adopting the off-axis configuration of SIDH. We will provide the detailed procedures to retrieve the complex hologram using the proposed arbitrary phase shifting algorithm and the off-axis configuration
Advanced analytic treatment and efficient computation of the diffraction integrals in the extended Nijboer-Zernike theory
Get PDFThe computational methods for the diffraction integrals that occur in the Extended Nijboer-Zernike (ENZ-) approach to circular, aberrated, defocused optical systems are reviewed and updated. In the ENZ-approach, the Debye approximation of Rayleigh’s integral for the through-focus, complex, point-spread function is evaluated in semi-analytic form. To this end, the generalized pupil function, comprising phase aberrations as well as amplitude non-uniformities, is assumed to be expanded into a series of Zernike circle polynomials, and the contribution of each of these Zernike terms to the diffraction integral is expressed in the form of a rapidly converging series (containing power functions and/or Bessel functions of various kinds). The procedure of expressing the through-focus point-spread function in terms of Zernike expansion coefficients of the pupil function can be reversed and has led to the ENZ-method of retrieval of pupil functions from measured through-focus (intensity) point-spread functions. The review and update concern the computation for systems ranging from as basic as having low NA and small defocus parameter to high-NA systems, with vector fields and polarization, meant for imaging of extended objects into a multi-layered focal region.In the period 2002-2010, the evolution of the form of the diffraction integral (DI) was dictated by the agenda of the ENZ-team in which a next instance of the DI was handled by amending the computation scheme of the previous one. This has resulted into a variety of ad hoc measures, lack of transparency of the schemes, and sometimes prohibitively slow computer codes. It is the aim of the present paper to reconstruct the whole building of computation methods, using consistently more advanced mathematical tools. These tools areexplicit Zernike expansion of the focal factor in the DI,Clebsch-Gordan coefficients for the omnipresent problem of linearizing products ofZernike circle polynomials,recursions for Bessel functions, binomials and for the coefficients of algebraic functionsthat occur as pre-factors of the focal factor in the DI.This results in a series representation of the DI involving (spherical) Bessel functions and Clebsch-Gordon coefficients, in which the dependence of the DI on parameters of the optical configuration, on focal values, on spatial variables in the image planes, and on degree and azimuthal order of the circle polynomials are separated. This separation of dependencies, together with bounds on Clebsch-Gordon coefficients and spherical Besselfunctions, facilitate the error analysis for the truncation of series, showing that in the new scheme the DI can be computed virtually without loss-of-digits. Furthermore, this separation allows for a modular implementation of the computation scheme that offers speed and flexibility when varying the various parameters and variables. The resulting scheme is pre-eminently appropriate for use in advanced optical simulations, where large defocus values, high NA and Zernike terms of high order and degree occur
Scattering and absorption properties of biomaterials for dental restorative applications
Get PDFThe physical understanding of the optical properties of dental biomaterials is mandatory for their final success in restorative applications.Light propagation in biological media is characterized by the absorption coefficient, the scattering coefficient, the scattering phase function,the refractive index, and the surface conditions (roughness). We have employed the inverse adding-doubling (IAD) method to combine transmittanceand reflectance measurements performed using an integrating-sphere setup with the results of the previous scattering-anisotropygoniometric measurements. This has led to the determination of the absorption and the scattering coefficients. The aim was to opticallycharacterize two different dental-resin composites (nanocomposite and hybrid) and one type of zirconia ceramic, and comparatively studythem. The experimental procedure was conducted under repeatability conditions of measurement in order to determine the uncertaintyassociated to the optical properties of the biomaterials. Spectral variations of the refraction index and the scattering anisotropy factor werealso considered. The whole experimental procedure fulfilled all the necessary requirements to provide optical-property values with lowerassociated uncertainties. The effective transport coefficient presented a similar spectral behavior for the two composites but completelydifferent for the zirconia ceramic. The results demonstrated that the scattering anisotropy exerted a clearly distinct impact on the opticalproperties of the zirconia ceramic compared with those of the dental-resin composites
Compact planar lenses based on a pinhole and an array of single mode metallic slits
Get PDFPlasmonic lenses are based on complex combinations of nanoscale high aspect ratio slits. We show that their design can be greatly simplified, keeping similar performance while releasing technological constraints. The simplified system, called Huygens lens, consists in a central aperture surrounded by several identical single mode slits in a thin gold layer that does not rely anymore on surface plasmons. The focusing behaviour with respect to the position and number of slits is investigated, and we demonstrate the interest of this design to get compact array of lenses
Towards self-clocked gated OCDMA receiver
Get PDFA novel incoherent OCDMA receiver with incorporated all-optical clock recovery for self-synchronization of a time gate for the multi access interferences (MAI) suppression and minimizing the effect of data time jitter in incoherent OCDMA system was successfully developed and demonstrated. The solution was implemented and tested in a multiuser environment in an out of the laboratory OCDMA testbed with two-dimensional wavelength-hopping time-spreading coding scheme and OC-48 (2.5 Gbp/s) data rate. The self-clocked all-optical time gate uses SOA-based fibre ring laser optical clock, recovered all-optically from the received OCDMA traffic to control its switching window for cleaning the autocorrelation peak from the surrounding MAI. A wider eye opening was achieved when the all-optically recovered clock from received data was used for synchronization if compared to a static approach with the RF clock being generated by a RF synthesizer. Clean eye diagram was also achieved when recovered clock is used to drive time gating
Reducing BER of spectral-amplitude coding optical code-division multiple-access systems by single photodiode detection technique
Get PDFIn this paper, we present a single photodiode detection (SPD) technique for spectral-amplitude coding optical code-division multiple-access (SAC-OCDMA) systems. The proposed technique eliminates both phase-induced intensity noise (PIIN) and multiple-access interference (MAI) in the optical domain. Analytical results show that for 35 simultaneous users transmitting at data rate of 622 Mbps, the bit-error rate (BER) = 1.4x10^-28 for SPD technique is much better compared to 9.3x10^-6 and 9.6x10^-3 for the modified-AND as well as the AND detection techniques, respectively. Moreover, we verified the improved performance afforded by the proposed technique using data transmission simulations