Journal of Biological Methods (JBM)
Not a member yet
163 research outputs found
Sort by
In vitro fermentation test bed for evaluation of engineered probiotics in polymicrobial communities
No full textIn vitro fermentation systems offer significant opportunity for deconvoluting complex metabolic dynamics within polymicrobial communities, particularly those associated with the human gut microbiome. In vitro gut models have broad experimental capacity allowing rapid evaluation of multiple parameters, generating knowledge to inform design of subsequent in vivo studies. Here, our method describes an in vitro fermentation test bed to provide a physiologically-relevant assessment of engineered probiotics circuit design functions. Typically, engineered probiotics are evaluated under pristine, monoor co-culture conditions and transitioned directly into animal or human studies, commonly resulting in a loss of desired function when introduced to complex gut communities. Our method encompasses a systematic workflow entailing fermentation, molecular and functional characterization, and statistical analyses to validate an engineered probiotic’s persistence, plasmid stability and reporter response. To demonstrate the workflow, simplified polymicrobial communities of human gut microbial commensals were utilized to investigate the probiotic Escherichia coli Nissle 1917 engineered to produce a fluorescent reporter protein. Commensals were assembled with increasing complexity to produce a mock community based on nutrient utilization. The method assesses engineered probiotic persistence in a competitive growth environment, reporter production and function, effect of engineering on organism growth and influence on commensal composition. The in vitro test bed represents a new element within the Design-Build-Test-Learn paradigm, providing physiologically-relevant feedback for circuit re-design and experimental validation for transition of engineered probiotics to higher fidelity animal or human studies.
Getting two birds with one stone: Combining immunohistochemistry and Azan staining in animal morphology
No full textClassical histological stained sections have the disadvantage that fine structures, like individual neurites, or specific macromolecules, like neurotransmitters cannot be visualized. Due to its highly specific staining of only one target molecule within the cell, the visualization of delicate structures, which would be superimposed by other tissue layers in classical Azan staining, is possible with immunohistochemistry. However, using immunohistological methods not all tissues of a specimen can be visualized at once. In contrast, density specific stains like Azan allow for a whole staining of the tissues. We provide a step by step protocol of how to combine immunohistochemistry and Azan staining in the same serial paraffin sections. The combination of both methods allows for a highly detailed investigation of structures of interest. The spatial detection of the previous, to Azan staining, gained antibody-labeled signal allows for a much better understanding of animal organ systems. By using serial sections, it is possible to create an aligned image stack that is both Azan stained and also antibody-labeled. Thus enabling a correlative approach that bridges traditional histology with immunohistochemistry in animal morphology
Comparison of CRISPR and adenovirus-mediated Myd88 knockdown in RAW 264.7 cells and responses to lipopolysaccharide stimulation
No full textGenomic manipulation offers the possibility for novel therapies in lieu of medical interventions in use today. The ability togenetically restore missing inflammatory genes will have a monumental impact on our current immunotherapy treatments. This study compared the efficacy of two different genetic manipulation techniques: clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated protein 9 (Cas9) transfection to adenoviral transduction to determine which method would provide the most transient and stable knockdown of myeloid differentiation primary response 88 (MyD88). MyD88 is a major regulator of nuclear factor kappa light chain enhancer of activated B cells (NFκB) pathway in Raw 264.7 macrophages. Following genetic manipulation, cells were treated for 24 h with Lipopolysaccharide (LPS) to stimulate the inflammatory pathway. Confirmation of knockdown was determined by western immunoblotting and quantification of band density. Both CRISPR/Cas9 and adenoviral transduction produced similar knockdown efficiency (~64% and 60%, respectively) in MyD88 protein 48 h post adenoviral transduction. NFκB phosphorylation was increased in CRISPR/Cas9-mediated MyD88 knockdown and control cells, but not in adenovirus-mediated MyD88 knockdown cells, following LPS administration. CRISPR/Cas9-mediated MyD88 knockdown macrophages treated with LPS for 24 h showed a 65% reduction in tumor necrosis factor alpha (TNFα) secretion, and a 67% reduction in interleukin-10 (IL-10) secretion when compared to LPS-stimulated control cells (P ≤ 0.01 for both). LPS did not stimulate TNFα or IL-10 secretion in adenovirus-mediated control or MyD88 knockdown cells. These data demonstrate that Raw 264.7 macrophages maintain responsiveness to inflammatory stimuli following CRISPR/Cas9-mediated reductions in MyD88, but not following adenovirus-mediated MyD88 knockdown
Special issue editorial: Methods to facilitate SARS-CoV-2 and COVID-19 research
No full textThis special issue of Journal of Biological Methods presents methods related to SARS- CoV-2 research in responding to the current global COVID-19 pandemic
Visualization of subdiffusive sites in a live single cell
No full textWe measured anomalous diffusion in human prostate cancer cells which were transfected with the Alexa633 fluorescent RNA probe and co-transfected with enhanced green fluorescent protein-labeled argonaute2 protein by laser scanning microscopy. The image analysis arose from diffusion based on a “two-level system”. A trap was an interaction site where the diffusive motion was slowed down. Anomalous subdiffusive spreading occurred at cellular traps. The cellular traps were not immobile. We showed how the novel analysis method of imaging data resulted in new information about the number of traps in the crowded and heterogeneous environment of a single human prostate cancer cell. The imaging data were consistent with and explained by our modern ideas of anomalous diffusion of mixed origins in live cells. Our original research presented in this study is significant as we obtained a complex diffusion mechanism in live single cells
An efficient method to generate kidney organoids at the air-liquid interface
No full textThe prevalence of kidney dysfunction continues to increase worldwide, driving the need to develop transplantable renal tissues. The kidney develops from four major renal progenitor populations: nephron epithelial, ureteric epithelial, interstitial and endothelial progenitors. Methods have been developed to generate kidney organoids but few or dispersed tubular clusters within the organoids hamper its use in regenerative applications. Here, we describe a detailed protocol of asynchronous mixing of kidney progenitors using organotypic culture conditions to generate kidney organoids tightly packed with tubular clusters and major renal structures including endothelial network and functional proximal tubules. This protocol provides guidance in the culture of human embryonic stem cells from a National Institute of Health-approved line and their directed differentiation into kidney organoids. Our 18-day protocol provides a rapid method to generate kidney organoids that facilitate the study of different nephrological events including in vitro tissue development, disease modeling and chemical screening. However, further studies are required to optimize the protocol to generate additional renal-specific cell types, interconnected nephron segments and physiologically functional renal tissues
High throughput nanopore sequencing of SARS-CoV-2 viral genomes from patient samples
No full textIn late 2019, a novel coronavirus began spreading in Wuhan, China, causing a potentially lethal respiratory viral infection. By early 2020, the novel coronavirus, called SARS-CoV-2, had spread globally, causing the COVID-19 pandemic. The infection and mutation rates of SARS-CoV-2 make it amenable to tracking introduction, spread and evolution by viral genome sequencing. Efforts to develop effective public health policies, therapeutics, or vaccines to treat or prevent COVID-19 are also expected to benefit from tracking mutations of the SARS-CoV-2 virus. Here we describe a set of comprehensive working protocols, from viral RNA extraction to analysis using established visualization tools, for high throughput sequencing of SARS-CoV-2 viral genomes using a MinION instrument. This set of protocols should serve as a reliable "how-to" reference for generating quality SARS-CoV-2 genome sequences with ARTIC primer sets and long-read nanopore sequencing technology. In addition, many of the preparation, quality control, and analysis steps will be generally applicable to other sequencing platforms
Virtual screening on the web for drug repurposing: a primer
No full textWe describe a procedure of performing in silico (virtual) screening using a web-based service, the MTiOpenScreen, whichis freely accessible to non-commercial users. We shall use the SARS-CoV-2 main protease as an example. Starting from a structure downloaded from the Protein Data Bank, we discuss how to prepare the coordinates file, taking into account the known biochemical background information of the target protein. The reader will find that this preparation step takes up most of the effort before the target is ready for screening. The steps for uploading the target structure and defining the search volume by critical residues, and the main parameters to use, are outlined. When this protocol is followed, the user will expect to obtain a ranked list of small approved drug compounds docked into the target structure. The results can be readily examined graphically on the web site or downloaded for studying in a local molecular graphics program such as PyMOL
Fabricating spatially functionalized 3D-printed scaffolds for osteochondral tissue engineering
No full textThree-dimensional (3D) printing of biodegradable polymers has rapidly become a popular approach to create scaffolds for tissue engineering. This technique enables fabrication of complex architectures and layer-by-layer spatial control of multiple components with high resolution. The resulting scaffolds can also present distinct chemical groups or bioactive cues on the surface to guide cell behavior. However, surface functionalization often includes one or more post-fabrication processing steps, which typically produce biomaterials with homogeneously distributed chemistries that fail to mimic the biochemical organization found in native tissues. As an alternative, our laboratory developed a novel method that combines solvent-cast 3D printing with peptide-polymer conjugates to spatially present multiple biochemical cues in a single scaffold without requiring post-fabrication modification. Here, we describe a detailed, stepwise protocol to fabricate peptide-functionalized scaffolds and characterize their physical architecture and biochemical spatial organization. We used these 3D-printed scaffolds to direct human mesenchymal stem cell differentiation and osteochondral tissue formation by controlling the spatial presentation of cartilage-promoting and bone-promoting peptides. This protocol also describes how to seed scaffolds and evaluate matrix deposition driven by peptide organization
Novel adaptation of a running suture technique in a mouse model of corneal transplantation
No full textSeveral murine models of corneal transplantation have been developed over the years to study the immunopathological processes that lead to the failure of grafted corneas. In all of them, the classic eight interrupted sutures technique is utilized for transplanting the donor cornea on the host bed. However, in clinical practice, a single continuous suture with a single knot is generally performed for corneal transplantation. Here, we describe the adaptation of the single continuous suture technique in a mouse model of corneal transplantation