Theory and practice of meat processing (E-Journal) / Теория и практика переработки мяса
Not a member yet
240 research outputs found
Sort by
Quality of carcasses and meat from male and female rabbits
Get PDFMeat from rabbits offers high nutritive properties as it has high levels of essential amino acids, minerals and vitamins. Rabbit meat is also regarded lean, since it contains less fat than many other meat types. The composition of rabbit meat lipids is also favourable due to higher contents of unsaturated fatty acids compared to other types of meat. The aim of the present study was to examine and compare meat quality from male and female rabbits. A total of 24 rabbits (12 males and 12 females) were used. The rabbits were slaughtered at an age of 17–18 weeks. The following parameters were studied: slaughter traits, colour, pH, cooking loss, tenderness, total fat content and water holding capacity (WHC). Interestingly, the ultimate pH was significantly lower in male compared to female rabbits (p = 0.008). Moreover, cooking losses were higher in the meat from male rabbits (p = 0.001). No other relevant differences were found between meat from male and female rabbits suggesting that sex might be regarded as a minor factor in the production of rabbit meat at the chosen slaughter age
Thermal conductivity factor for beef of NOR and DFD grades at the subcryoscopic temperatures
Get PDFThermal conductivity factor and specific isobaric heat capacity of food products are currently the most important parameters in the development of mathematical models for food freezing and thawing and in improving production technology. There is significant variance among the existing experimental data for the thermal conductivity factor in meat. Most of the modern calculated relationships are based on the nutritional approach, which favorably differs by the ability to calculate the thermophysical characteristics of any food products. However, the calculation error at the subcryoscopic temperatures may be 15% to 20%. The development of superchilling as a way of storing meat requires high accuracy of freezing time calculation, including vacuumpacked boneless meat. In the presented article, the authors investigated hydrogen index, cryoscopic temperature, frozen moisture proportion and thermal conductivity factor for beef M. longissimus dorsi samples of NOR and DFD grades. It was found that DFD beef is characterized by 10% to 12% higher values of thermal conductivity factor in comparison with NOR grade. Using the method of regression analysis, the authors developed empirical relationships for calculating the thermal conductivity factor of meat depending on its temperature and pH level. Unlike cryoscopic temperature and frozen moisture proportion, pH is easy to measure and may be easily used on a conveyor belt for more accurate assessment of meat thermophysical properties. With an increase in pH from 5.3 to 7, an increase in cryoscopic temperature is observed from minus 0.94 °C to minus 0.72 °C. It has been shown that one of the factors for the higher cryoscopic temperature and higher pH level of DFD beef is higher water-holding capacity with less strongly bound moisture
Methods for nonparametric statistics in scientific research. Overview. Part 1.
Get PDFDaily, researcher faces the need to compare two or more observation groups obtained under different conditions in order to confirm or argue against a scientific hypothesis. At this stage, it is necessary to choose the right method for statistical analysis. If the statistical prerequisites are not met, it is advisable to choose nonparametric analysis. Statistical analysis consists of two stages: estimating model parameters and testing statistical hypotheses. After that, the interpretation of the mathematical processing results in the context of the research object is mandatory. The article provides an overview of two groups of nonparametric tests: 1) to identify differences in indicator distribution; 2) to assess shift reliability in the values of the studied indicator. The first group includes: 1) Rosenbaum Q-test, which is used to assess the differences by the level of any quantified indicator between two unrelated samplings; 2) Mann-Whitney U-test, which is required to test the statistical homogeneity hypothesis of two unrelated samplings, i. e. to assess the differences by the level of any quantified indicator between two samplings. The second group includes sign G-test and Wilcoxon T-test intended to determine the shift reliability of the related samplings, for example, when measuring the indicator in the same group of subjects before and after some exposure. Examples are given; step-by-step application of each test is described. The first part of the article describes simple nonparametric methods. The second part describes nonparametric tests for testing hypotheses of distribution type (Pearson’s chi-squared test, Kolmogorov test) and nonparametric tests for testing hypotheses of sampling homogeneity (Pearson’s chi-squared test for testing sampling homogeneity, Kolmogorov-Smirnov test)
Scientific rationale of ingredients choice for functional fish pastes
Get PDFIn recent years, the global demand for finished fish products is increased. Aquaculture raw materials are a rich source of nutrients for health. At the same time a large amount of fished fish raw materials are rejected and representing a losses. High-quality raw materials with technological defects are not in demand by the food production of fish products. Perishable substandard fish raw materials can be used in the production of combined fish products. The analysis of the fish catches global scale in the seas, oceans, farmed marine and freshwater aquaculture is carried out. An assessment of the market trends for the production and fish products consumption is made. This article provides an overview of targeted ingredient selection for balanced fish formulations. The characteristics of the most popular plant origin ingredients and their derivatives in the fish pates production are given. A comprehensive assessment of the biological, energy and nutritional value of plant products is given. Described technological approaches and production methods, the safety of vegetable ingredients. The results of research, technological solutions, substantiation of the choice of ingredients adopted by the developers for the formulations of multicomponent pate are summarized. The use of unclaimed raw materials, leftover fish meat with plant ingredients represents additional profit. Fish pate formulations are the basis for the production of complete, ready-to-eat products. Tests of multicomponent fish and vegetable products confirm their high performance. Pates, balanced in nutritional value, minerals, are a finished product that does not require additional preparation. The review article will generate awareness among the researchers, food technologists for the production of fish products and the general public
Lactoferrin: properties and application. A review
Get PDFThe current state, prospects for using and priorities in studying multifunctional protein lactoferrin (LF) in the food industry are discussed. Over the last decades, the studies of iron-binding, antibacterial, antiviral and antiparasitic properties of this representative of transferrins have determined quite a wide sphere of its use. The data on the lactoferrin composition, structure and activity are presented. The authors describe the modern methods for lactoferrin extraction and production from dairy raw materials both in the domestic and foreign productions using chromatographic methods for extraction and membrane methods for production. The practical experience in its application for food production, in particular, for meat and fermented dairy products, child and sports nutrition is discussed. An effect of technological process parameters in food production on the LF activity is highlighted. The study analyses an influence of new processing technologies such as high pressure or pulsed electric field in combination with classic methods for thermal processing and drying on the structure and activity of lactoferrin in food. The reviewed studies show that the use of lactoferrin in the meat industry, especially, in finished meat products, has limitations. The data presented in the review suggest a need for searching ways of lactoferrin introduction into meat systems to obtain functional products. One of the top-priority method for LF incorporation into meat products is LF encapsulation as one of the production stages
The influence of brood chickens by-products processing with probiotic culture starter on change of their functional and technological parameters.
Get PDFBy-products are the potential source of animal protein obtained from brood chickens and egg-laying hens. Certain by-products like gizzards and combs are quite tough and possess low nutritional and biological value due to their high content of connective tissue. Biotechnological processing improves the quality parameters of collagen-containing by-products. In this article a probiotic starter culture of propionic acid bacteria, which have high proteolytic activity, was used to treat the gizzards and combs of brood chickens. Before processing of by-products with starter culture, physical and chemical parameters and the yield of by-products in relation to poultry live weight were analyzed and recorded. 5%, 10% and 15% starter culture were added to the tested samples of chopped by-products, the samples were kept at a temperature of 30 °C, and every 4 hours the following functional and technological parameters were monitored: moisture binding capacity, water holding capacity (MBC and WHC) and yield of the product after heat treatment. The results proved that increase of starter culture amount and longer exposure of by-products to hydrolysis led to decrease of functional and technological parameters values, but for the combs those parameters remained at a sufficiently high level compared to the gizzards, as the gizzards were exposed to more intense hydrolysis than combs. The decrease in the pH value correlated with the dynamics of MBC and WHC changes; and dynamics of the product yield after the heat treatment. Also the stained histological preparations were studied in order to assess the influence of biotechnological processing on by-products microstructure, where significant differences were found in the morphological structure of muscle and collagen fibers of hydrolysates of combs and gizzards exposed to action of bacterial concentrate. The results of rheological studies showed that hydrolyzed chicken combs differed from gizzards; the combs were denser and featured more elastic structure due to a lower degree of hydrolysis by bacterial enzymes. In general, the properties of collagen-containing by-products (muscular gizzards and combs) change significantly after being exposed to enzymes of propionic acid bacteria
Factors influencingmicrobial transmission in a meat processing plant
Get PDFThe review paper examines the main risk factors for microbial contamination of meat at different stages of its processing. Particular emphasis has been placed on primary animal processing being the most hazardous in terms of microbial contamination of meat. Carcass cross-contamination most frequently occurs during skinning and evisceration since hides and the digestive tract are the primary sources of microbial pathogens. It is necessary to observe stringent sanitary and hygienic rules when performing these operations. Continuous cold chain management along all following stages of meat processing and control of the sanitary status of cold chambers during meat storage are of extreme importance. An increase in the microbial counts due to the high number of manual operations was observed during meat cutting, boning, and trimming. Subsequent stages of meat processing, including mincing, curing, the addition of spices, also promote significant microbial growth. Strict control regarding detection of dangerous pathogens, especially L. monocytogenes, is needed at this stage. In general, to minimize problems linked with meat and meat product safety, it is necessary to take timely measures on sanitary treatment of meat processing facilities, including the prevention of biofilm formation
Quality properties and storage stability of beef burger as influenced by addition of orange peels (albedo)
Get PDFThe objective of this study was to investigate the effect of using the orange albedo (OA) on the quality attributes of low fat beef burger. The analysis included: chemical composition, water-holding capacity, cooking loss% and pH values as well as sensory evaluation of low fat beef burger prepared with the introduction of the OA with a concentration of 5% as a partial fat replacer were also studied. Microbiological analysis of frozen minced meat semi-finished products (burger patties, at minus 18 °C) stored for 126 days was included. According to the obtained results, the OA contains 1.47% of lipids, 1.42% of protein and 24.61% of dietary fiber. The result also showed that the usage of OA has a positive impact on organoleptic indicators of beef burger. Nutritional value, waterholding capacity, cooking loss% and pH of treated burger patties were improved. In addition, the caloric value of treatment samples decreased because of replacing the animal fat with the OA in recipe. During the storage of semi-finished products, Thiobarbituric values (TBA) showed that treatment samples substantially developed using OA instead of animal fat had a lower level of lipid oxidation compared to control samples. The shelf life of treated burger patties was significantly increased compared to control sample by decreasing the microbial growth and rate of fatty acids oxidation. Finally, OA could be accepted as a functional component in meat products
A study on the chemical and mineral composition of the protein-mineral paste from poultry and cattle bone raw materials
Get PDFWhen processing cattle and poultry, a large quantity of secondary slaughter products in the form of bone raw materials are formed in enterprises of the meat and poultry processing industry. Nowadays, its use is not optimal and rational. One of the promising directions of using bone raw materials in enterprises is production of finely ground meat and bone paste. The aim of this research was to study the chemical and mineral compositions, as well as the content of toxic elements in meat and bone paste from poultry and cattle bones obtained after complex grinding on a grinder and ultra-fine grinder. Chicken bone products (chicken necks, drumsticks, wings, breasts) and cattle costal and vertebral bones with residues of muscle tissue were used for investigation. The comparative analysis of the nutritional value of the meat and bone paste showed the following results: protein mass fraction was 18.5% in the meat and bone paste obtained from poultry bones, and 12.1% in the meat and bone paste obtained from cattle bones. The mass fraction of fat was two times higher in the meat and bone paste from poultry bones. As for the mineral composition, it has been established that meat and bone paste is a rich source of calcium: the calcium content was 1,654.02 mg/100g in the poultry meat and bone paste, and 5,318.13 mg/100g in the cattle meat and bone paste. In regard to the toxic element content, the normed values of lead and arsenic, cadmium and mercury were not revealed in the poultry and cattle meat and bone paste. The obtained meat and bone paste can be used for food purposes as a food additive in meat product manufacture, which will allow rational and economic use of bone raw materials in cattle and poultry processing
Risk identification and assessment in production of meat product packaging
Get PDFProduction of convenient and inexpensive packaging materials is increasing due to the constant growth of consumer demand for safer food products. The paper examines the questions dedicated to the development and introduction of the safety and quality management system in enterprises producing packaging for the meat industry. The authors analyze the elements of safety and quality management for polypropylene packaging in a form of a tray, which is a final element of the united chain in production of whole-piece meat semi-finished products. The investigations were carried out in the operating enterprise in the Moscow region. Hazardous factors in production of polypropylene packaging were identified, risk analysis with assessment of the probability of emergence and realization of hazardous factors was carried out, a Pareto chart was built, unacceptable risks were determined, critical control points (CCP) were revealed, preventive and corrective measures were developed with account for the established critical limits and requirements for CCP monitoring were formulated. All stages of production process were subjected to risk analysis; the severity of consequences from hazardous factor realization and the probability of such realization were assessed by experts for each of these stages. It was established that “injection molding and chilling in a press-mold” is a CCT as there is a risk of increasing the maximum allowable concentrations of chemical substances and compounds (formaldehyde, ethyl acetate, alcohols and others) as a chemical factor with the severity of consequences of 3 and the probability of realization of 3. Using the Pareto chart, causes that had the highest effects on safety and quality of polypropylene packaging were grouped. It was established that nonobservance of preventive maintenance schedule for equipment and, as a consequence, possible equipment failure (80%) influenced to the higher degree the realization of chemical hazardous factor