Scientific Journals of INIA (Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria)
Not a member yet
    3042 research outputs found

    A GIS-based multivariate clustering for characterization and ecoregion mapping from a viticultural perspective

    Get PDF
    In wine-growing regions, zoning studies define areas according to their potential to produce specific wines and also identify the key drivers behind their variability and optimize vineyard management for sustainable viticulture. However, delineation of homogeneous zones is difficult because of the complex combination of factors which could affect zone classifications. One possibility to capture potential variability is the use of natural environmental properties as they are related to success in grape growing. With the aim of characterizing the spatial variability of the main vine-related environmental variables and determining different zones, climate and topographical data were obtained for Extremadura (southwestern Spain), an important wine region. Firstly, accurate maps of all climate indices were generated by using regression-kriging as the most suitable algorithm in which exhaustive secondary information on elevation was incorporated, and maps of topography-derived variables were obtained using GIS (Geographical Information System) tools. Secondly, principal component analysis and multivariate geographic classification were used to define homogeneous classes, resulting in three zones. Each zone was further characterized by overlaying the zonation map with a geology map and all enviromental layers. It was obtained that although a wide part of the Extremaduran territory has warm climate characteristics, the zones have different viticultural potential and a high proportion of the region lays on suitable substrate. This zonation in Extremadura is the basis for further zoning studies at more detailed field scale and the modeling of vineyard response to climate change

    Editorial Board

    Get PDF

    Morpho-physiological response of Acacia auriculiformis as influenced by seawater induced salinity stress

    Get PDF
    Aim of the study: To evaluate the morpho-physiological changes of Acacia auriculiformis in response to seawater induced salinity stress along with its tolerance limit.Area of study: Bangabandhu Sheikh Mujibur Rahman Agricultural University, Bangladesh.Material and methods: Three saline treatments (4, 8, 12 dS m-1) were applied to six-month aged Acacia auriculiformis seedlings from January 2014 to June 2014 and the tap water was used as control treatment. To observe salinity effects, the following parameters were measured by using various established techniques: plant height and leaf number, plant biomass, shoot and root distribution as well as shoot and root density, water uptake capacity (WUC), water saturation deficit (WSD) and water retention capacity (WRC), exudation rate, and cell membrane stability.Main results: Diluted seawater caused a notable reduction in shoot and root distribution in addition to shoot and root density, though plant height, leaf number and plant biomass were found to be decreased to some extent compared to control plants. Water status of the plant also altered when plants were subjected to salinity stress. Nevertheless, membrane stability revealed good findings towards salinity tolerance.Research highlights: Considering the above facts, despite salinity exerts some negative effects on overall plant performance, interestingly the percent reduction value doesn’t exceed 50% as compared to control plants, and the plants were successful to tolerate salinity stress till the end of the experiment (150 days) through adopting some tolerance mechanisms.Additional key words: Salt stress; halophytes; growth parameters; WUC; exudation rate; membrane stability.Abbreviations used: BSMRAU (Bangabandhu Sheikh Mujibur Rahman Agricultural University); RCBD (randomized complete block design); DATI (days after treatment imposition); RWC (relative water content); WUC (water uptake capacity); WSD (water saturation deficit); WRC (water retention capacity); FW (fresh weight); DW (dry weight); TW (turgid weight); ROS (reactive oxygen species).

    Recovery after 25 years of the tree and palms species diversity on a selectively logged forest in a Venezuelan lowland ecosystem

    Get PDF
    Aim of study: We evaluate palm and tree species diversity in a floodplain forest and the changes affecting the plots subjected to different intensities of selective logging.Area of study: The western alluvial plains of Venezuela.Materials and Methods: A randomized complete blocks design was established 25 years ago with three felling treatments (trees with diameter greater than 20 cm, 40 cm and 60 cm). Each treatment had three replications, using 1 ha permanent plots. We have measured all trees and palms bigger than over 10 cm in diameter. The data set was used to calculate the Importance Value Index of each species, the Shannon-Wiener index, the Hill Numbers and the Chao-Sørensen index.Main results: Disturbance increases the importance value index of pioneer species like Cecropia peltata, Ochroma pyramidale and Triplaris americana. All treatments produce changes on the floristic diversity but most of them are not significant. Only the high impact treatment causes a decrease in the species richness, but after 5 year of recovery this parameter is close to its previous levels (N0= 43.5). In logged forests, species loss (9.2%) is lower than in the control plots (11.7%) and is also lower than the rate of occurrence of species input (14.6%).Research highlights: In these logged forests restoration of diversity is acceptable because is higher than 91% (Chao-Sørensen index). Selective logging, with low and medium intensity, is a disturbance that works in a similar way to natural disturbances. All the diversity indexes recovered the pre-harvest level values.Keywords: Caparo - Venezuela; ecological restoration; forest dynamics; forest management; forest succession; Intermediate Disturbance Hypothesis; permanent plots

    Assessment of Different Remote Sensing Data for Forest Structural Attributes Estimation in the Hyrcanian forests

    Get PDF
    Aim of study: The objective of the study was the comparative assessment of various spatial resolutions of optical satellite imagery including Landsat-TM, ASTER, and Quickbird data to estimate the forest structure attributes of Hyrcanian forests, Golestan province, northernIran.Material and methods: The 112 square plots with area of0.09 ha were measured using a random cluster sampling method and then stand volume, basal area, and tree stem density were computed using measured data. After geometric and atmospheric corrections of images, the spectral attributes from original and different synthetic bands were extracted for modelling. The statistical modelling was performed using CART algorithm. Performance assessment of models was examined using the unused validation plots by RMSE and bias measures.Main Results: The results showed that model of Quickbird data for stand volume, basal area, and tree stem density had a better performance compared to ASTER and TM data. However, estimations by ASTER and TM imagery had slightly similar results for all three parameters.Research highlights: This study exposed that the high-resolution satellite data are more useful for forest structure attributes estimation in the Hyrcanian broadleaves forests compared with medium resolution images without consideration of images costs. However, regarding to be free of the most medium resolution data such as ASTER and TM,ETM+ or OLI images, these data can be used with slightly similar results.  Keywords: Forest structure attributes; quickbird; ASTER; TM; CART algorithm; Hyrcanian forests

    Invasion of alien plants in fire-damaged forests at southern boundary of the taiga zone

    Get PDF
    Aim of study: Biological invasions are one of the most important areas of forest research. In this study, we revealed invasibility of fire-damaged forests at the southern boundary of the taiga zone.Area of study: The Mordovia State Nature Reserve (Central Russia).Material and Methods: Altogether, 11 square plots of each 100 ×100 m were established in different types of fire-damaged forests. To test plant invasion outside the established plots, field researches were carried out by route method in fire-damaged area of the Mordovia Reserve.Main Results: Six alien species (Erigeron canadensis, E. annuus, Oenothera biennis, Lactuca serriola, Sambucus racemosa, Viola arvensis) were registered within the established plots in 2011–2014. In addition, two alien invasive plants (Solidago canadensis and Bidens frondosa) were found outside these plots. No differences were detected in invasibility of the tested forest ecosystems.Research highlights: Among the revealed alien species, Erigeron canadensis, Lactuca serriola and Solidago canadensis are the most invasive plants in forest ecosystems. The first one was observed with a high occurrence frequency and abundance in all forest types tested. The second one has not been differed by abundance, but it characterized by a high competition as well as a large biomass and a large number of seeds. Solidago canadensis penetrated to natural forest ecosystem in a short time period due to closest location of its dispersal centers near the boundary of the Mordovia Reserve. These species are the most probable invaders of the forest ecosystems.Keywords: Invasive plants; invisibility; post-fire successions; Mordovia State Nature Reserve; wildfire; forest ecosystem

    Future scenarios and conservation strategies for a rear-edge marginal population of Pinus nigra Arnold in Italian central Apennines

    Get PDF
    Aim of study: To forecast the effects of climate change on the spatial distribution of Black pine of Villetta Barrea in its natural range and to define a possible conservation strategy for the speciesArea of study: A rear-edge marginal population of Pinus nigra spp. nigra in Abruzzo region, central Italian ApenninesMatherials and Methods: For its adaptive and genetic traits this population is considered endemic of the Italian peninsula and represents a rear-edge marginal population of nigra subspecies. The spatial distribution of the tree in the administrative Region (Abruzzo) was used to define the ecological traits while three modelling techniques (GLM, GAM, Random Forest) were used to build a Species distribution model according to two climatic scenarios.Main results: The marginal population's range was predicted to shift at higher elevations as consequence of climatic adaptation. Many zones, represented by the higher part of the mountains surrounding the study area (currently bare and inhospitable for trees), were identified as suitable in future for the species. However, in the case of a rapid climate change, this marginal population may not be able to move as fast as necessary. An in-situ adaptive management integrated with an assisted migration protocol might be considered to enforce the natural regeneration and improve the richness and variability of the genetic pool.Research highlights: Most of the genetic richness is held in small populations at the borders of natural distribution of forest species. Monitoring this MAP could be useful to understand the adaptive processes of the species and could support the future management of many other within-core populations.Keywords: Species Distribution Models; Mediterranean forests; Abruzzo; climate change; altitudinal shift

    Editorial Board

    Get PDF

    The “Criollo Negro de la Costa Ecuatoriana” pigs. Performance, carcass and meat traits

    No full text
    The objective of this study was to evaluate the effect of rearing system (confinement, C vs semi-confinement, SC) and sex (barrows vs females) on growth performance, carcass traits and meat quality of “Criollo negro de la costa ecuatoriana” pigs. A total of 32 pigs, 16 barrows and 16 gilts were used. The average daily gain (0.30 kg/day vs 0.22 kg/day), slaughter weight (51.4 kg vs 43.1 kg), morphometric parameters and weights for the most valuable meat cuts were higher in C pigs than in SC pigs, whereas hot and cold carcass yields were higher in SC pigs than in C pigs. The loin and sirloin percentages from C pigs were lower and higher compared with those SC pigs, respectively. Carcass of C pigs showed higher percentage of fat and lower percentage of lean and bone that SC pigs. The rearing system had scarce effects on meat quality traits and mineral composition. Meat from C pigs showed lower scores for color, brightness, and unctuousness, and higher for metallist taste, juiciness and persistence of flavor than SC pigs. Few sensory attributes of cooking chops were affected by sex. Metallist taste was higher in barrows, while brightness and lard flavor were higher in females. It can be concluded that the rearing system had a significant effect on most of the productive and carcass traits, whereas its effect was limited on the meat traits. Sex had little influence on most of the traits studied.A total of 32 Creole pigs were used to evaluate the effect of rearing system and sex on carcass and meat traits. 8 males and 8 females were reared in a semi-confinement system (SC), and a second group (8 males and 8 females) was reared indoors (C). The C pigs showed a better growing rate (0.3 kg/d vs. 0.22 kg/d) and final live weight, as well as higher morphometric parameters, and superior weights for the most valuable meat cuts to those of SC pigs, while showed a lower hot and cold carcass yields. The loin and sirloin percentages from C pigs were lower and higher compared with those SC pigs, respectively. Carcass of C pigs showed higher percentage of fat and lower percentage of lean and bone that SC pigs. The rearing system did not affect the meat quality traits and mineral composition. Meat from C pigs showed lower scores for color, brightness, and unctuousness, and higher for metallist taste, juiciness and persistence of flavor than SC pigs. Few sensory attributes of cooking chops were affected by gender. Metallist taste was higher in males, while brightness and lard flavor were higher in females

    The effect of biological and chemical additives on the chemical composition and fermentation process of Dactylis glomerata silage

    Get PDF
    This study was carried out to determine the chemical composition, silage quality and ensilability of ten cocksfoot cultivars using biological and chemical silage additives. The plant material was harvested from the first and second cut, cultivated at the Research Station of Fodder Crops in Vatín, Czech Republic. Wilted forage was chopped and ensiled in mini-silos with 3 replicates per treatment. The treatments were: 1) without additives, used as a control; 2) with bacterial inoculants; and 3) with chemical preservatives. The results indicated that the year factor (2012-2013) influenced significantly the chemical composition of the silage in both cuts. The use of biological inoculants reduced the content of crude fibre and acid detergent fibre; but it did not influence the content of neutral detergent fibre, in comparison with the control silage in both cuts. Furthermore, the application of biological inoculants reduced the concentration of lactic acid (LA) and acetic acid (AA) in contrast to the control silage in the first cut. Moreover, in the second cut the same values tended to be the opposite. Interestingly, ‘Amera’ was the unique variety that presented a high concentration of butyric acid (0.2%) in comparison with other varieties in the first cut. In conclusion, the biological inoculants had a favourable effect on silage fermentation. Notably, only ‘Greenly’ and ‘Starly’ varieties from the first cut; and ‘Greenly’, ‘Sw-Luxor’, and ‘Otello’ varieties from the second cut were appropriate for ensiling because their pH-values; LA and AA concentrations were ideal according to the parameters of the fermentation process

    2,713

    full texts

    3,042

    metadata records
    Updated in last 30 days.
    Scientific Journals of INIA (Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria)
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇