Scientific Journals of INIA (Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria)
Not a member yet
3042 research outputs found
Sort by
Substrate properties, forest structure and climate influences wood-inhabiting fungal diversity in broadleaved and mixed forests from Northeastern Romania
Aim of the study: The main objective of this study was to find the factors which best explains the wood-inhabiting fungal species’ richness in beech and oak-dominated forests.Area of study: We focused on broadleaved and mixed forests found in Northeastern Romania.Materials and methods: 59 plots were randomly set up in broadleaved and mixed forest stands, in which vegetation structure, composition, and topoclimatic factors were quantified along with wood-inhabiting fungal richness. Generalized linear models were used to characterize relationship between fungal diversity and biotic and abiotic factors.Main results: 374 taxa were identified, with numerous species found to cohabitate, the highest sharing being between Fine Woody Debris and Downed Coarse Woody Debris. The best predictors of total diversity were related to the substrate, management, stand structure, and macroclimate. Higher volumes of logs and large branches in various decay stages increased fungal richness. The same effect was found in diverse forests, with large snags. Macroclimate and topoclimate positively influenced diversity, through De Martonne Aridity Index and snow cover length, both indicating macrofungi preferences for higher moisture of substrate. Silvicultural interventions had an ambivalent effect to fungal diversity, phenomenon observed through stump numbers and proportion.Research highlights: Particular environmental characteristics proved significantly important in explaining different wood-inhabiting fungal richness patterns. Substrate-related variables were the most common ones found, but they were closely linked to climate and forest stand variables.Keywords: Wood-inhabiting fungi; oak, beech and coniferous forests; substrate diversity; dead wood types; coarse woody debris; fine woody debris; climatic variables.Abbreviations used:ALT, elevation; ASPI, Aspect Index; BIO1, mean annual temperature; BIO4, temperature seasonality; BIO7, annual temperature range; BIO12, annual precipitation; BIO15, precipitation seasonality; CWD, coarse woody debris; DBH, diameter at breast height; DCWD, downed coarse woody debris; DCWD_DECAY, DCWD decay diversity; DCWD_DIV, DCWD taxonomic diversity; DCWD_SV, surface-volume ratio of DCWD; DCWD_VOL, DCWD volume; DMAI, De Martonne Aridity Index; DMAI_AU, Autumn DMAI; DMAI_SP, Spring DMAI; DMAI_SU, Summer DMAI; DMAI_WI, Winter DMAI; FAI, Forestry Aridity Index; FWD, fine woody debris; L_SNAG_BA, large snag basal area; OLD_BA, basal area of old trees; POI, Positive Openness Index; RAI, Recent Activity Index; SCL, snow cover length; SLOPE, slope; SNAG_N, snag density; STUMP_N, stump density; TPI, Topographic Position Index; TREE_BA, mean basal area of trees; TREE_DIV, tree' Shannon diversity
Water consumption and preliminary crop coefficients of two Populus ×canadensis clones (‘I-214’ and ‘I-488’) grown at low planting density
Aim of study: The productivity of poplar plantations in Mediterranean climates might be reduced due to lower precipitations in a climate change scenario. Therefore, understanding the water consumption in these plantations is essential for their management. The objective of this study was to estimate water consumption and preliminary crop coefficients (kc) of two universally used poplar clones (Populus x Canadensis ‘I-214’ and ‘I-488’).Area of study: Central Chile (36º 05 'LS; 72º 47' LW; 470 m.a.s.l.).Materials and methods: Commercial stands of poplar clones established in 2009 and 2010 at low density (6×6 m) were used to experiment during the 2016-2017 growing season. In each of them, water balance was measuring, by determining evaporation using micro lysimeters and transpiration using the sap flow. Additionally, the water status and the leaf area index (LAI) were measured to understand the behaviour of both clones.Main results: Although the water supplied to both clones was the same, the transpiration (T) was higher for ‘I-488’ than ‘I-214’, at those moments in which the evapotranspiration (ETr) and the vapour pressure deficit (VPD) was higher. On the other hand, differences were observed in plant water status, ‘I-488’ had more negative xilematic water potential (Ψx) compared to ‘I-214’. In turn, I-214 proved to have a higher Leaf Area Index (LAI) than I-488 and grew more during the season, refuting its greater efficiency.Research highlights: These results allow characterizing the water behaviour of both clones in Mediterranean climate condition, but it is necessary to extend the study to more seasons and different age ranges.Keywords: Crop coefficient; water consumption; water balance; poplar
Optimizing wheat seed treatment with entomopathogenic fungi for improving plant growth at early development stages
Aim of study: Entomopathogenic fungi (EPF) are biocontrol agents, plant growth promoters, and increase tolerance to biotic-abiotic stresses. In this study we investigated the factors associated to the application method, which are crucial for the interaction between the fungus and the host plant at initial crop growth stages.
Area of study: The study was performed in Cordoba (Spain)
Material and methods: Three experiments were performed to investigate: (i) the effect of different concentrations of the surfactant Tween® 80 (0, 0.5, 1, 5, and 10%) on wheat seed coating with conidia of Metarhizium brunneum and seed and conidia viability; (ii) the performance of wheat seedlings at first growth stages after their inoculation with Beauveria bassiana or M. brunneum via seed coating or soil drenching; and (iii) the role of soil sterilization and seed disinfection on leaf concentration of chlorophyll (SPAD) and B. bassiana or M. brunneum colonization.
Main results: Tween® 80 concentration linearly improved seed coating (up to 127%) without altering wheat seeds and fungal conidia germination. Seedling length of inoculated plants was significantly increased with B. bassiana and M. brunneum (67% and 46%, respectively) via seed coating. Seed disinfection was key to achieve an enhancement in wheat SPAD (10-18%) with B. bassiana or M. brunneum concerning Control, that combined with sterilization of soil showed the highest endophyte colonization rates (up to 83.3% with both fungi)
Research highlights: The surfactant concentration, application method, seed disinfection, and soil sterilization are key parameters to improve the potential benefits on the EPF-plant relationship
A genetic algorithm for resizing and sampling reduction of non-stationary soil chemical attributes optimizing spatial prediction
Aim of study: To evaluate the influence of the parameters of the geostatistical model and the initial sample configuration used in the optimization process; and to propose and evaluate the resizing of a sample configuration, reducing its sample size, for simulated data and for the study of the spatial variability of soil chemical attributes under a non-stationary with drift process from a commercial soybean cultivation area.Area of study: Cascavel, BrazilMaterial and methods: For both, the simulated data and the soil chemical attributes, the Genetic Algorithm was used for sample resizing, maximizing the overall accuracy measure.Main results: The results obtained from the simulated data showed that the practical range did not influence in a relevant way the optimization process. Moreover, the local variations, such as variance or sampling errors (nugget effect), had a direct relationship with the reduction of the sample size, mainly for the smaller nugget effect. For the soil chemical attributes, the Genetic Algorithm was efficient in resizing the sampling configuration, since it generated sampling configurations with 30 to 35 points, corresponding to 29.41% to 34.31% of the initial configuration, respectively. In addition, comparing the optimized and initial configurations, similarities were obtained regarding spatial dependence structure and characterization of spatial variability of soil chemical attributes in the study area.Research highlights: The optimization process showed that it is possible to reduce the sample size, allowing for lesser financial investments with data collection and laboratory analysis of soil samples in future experiments
Persistent fire effect on forest dynamics and species composition of an old-growth tropical forest
Aim of the study: To assess structure, recruitment and mortality rates of tree species over almost three decades, 14 years before and 15 years after a forest fire.
Material and methods: All trees ≥ 5 cm in DBH were identified and measured in 12 permanent plots (50 m x 50 m), in 1983, 1987, 1989, 1995, 2008, and 2012 of a dense ombrophilous forest in Eastern Amazon, Brazil. The analyses were carried out including all sampled species and their ecological groups: shade-tolerant, light-demanding, and pioneer species. Treatments were compared through a Linear Mixed Effect Model.
Main results: The 15-year post-fire period is not enough for the old-growth tropical forest to recover its pre-fire conditions of recruitment and mortality rates. The post-fire recruitment and mortality rates increased, mainly the recruitment of pioneer species (p-value < 0.05).
Research highlights: In a period of 15 years after the occurrence of a surface fire, the old-growth tropical forest still has high recruitment rates of shade-tolerant and light-demanding species and high incidence of pioneer species, confirming the persistent fire effects on forest dynamics and species composition in this ecosystem.
Keywords: pioneer tree species; species dynamics; forest resilience; Tapajós National Forest; Amazonian forests.
Abbreviations used: DBH (diameter at 1.3 m from the ground); D (density); BA (basal area); EG (ecological group); ST (shade-tolerant); LD (light-demanding); Pi (pioneer); Ni (non-identified ecological group); MR (mortality rates); RR (recruitment rates); LMM (Linear Mixed Effect Model)
Biomass equations for rockrose (Cistus laurifolius L.) shrublands in North-central Spain
Aims of the study: To construct biomass weight equations for rockrose (Cistus laurifolius L.) shrublands in North-central Spain comparing different methodologies and evaluating the applicability of the current Spanish open PNOA-LiDAR data.
Area of study: The growing extension of Mediterranean shrublands associated with a high wildfire risk in a climate change scenario is considered a relevant source of biomass for energy use and bioproducts. Quantifying the biomass load of the shrublands provides essential information for adequate management, calling for the development of equations to estimate said biomass loads in the most extensive monospecific shrublands.
Materials and methods: Biomass dry weight from 290 destructive sampling plots (ø4m) and 426 individual plants along with LiDAR data from PNOA were related to dasometric parameters to fit weight per surface and weight per plant equations.
Main results: Three new equations improve rockrose biomass estimations in North-central Spain: a) Weight per unit area (tDM.ha-1) equation (Eq. 1) based on apparent biovolume (product of crown cover in percentage by average height in meters) (Radj2 0.69, MAE 26.1%, RMSE 38.4%); b) Weight per plant (kgDM.plant-1) equation (Eq. 2) from height and crown diameter (Radj2 0.87, MAE 26.5%, RMSE 45.2%) and c) Weight per unit area equation (tDM.ha-1) (Eq. 3) based on LiDAR data contrasted with field data (Radj2 0.89, MAE 15.1%, RMSE 22.9%).
Research highlights: Eq. 1 and Eq. 3 combined with high resolution LiDAR information offer rockrose (Cistus laurifolius L.) biomass estimations without added field work costs that are an improvement on certain more general studies carried out in other areas of Spain.
Keywords: Shrub; wildfire prevention; forest energy; LiDAR; weight biomass equations
Supplement levels and functional oils to replace virginiamycin for young bulls during early dry season on grasslands and finishing phase in feedlot systems
Aim of study: To assess the effects of replacing virginiamycin (VM) by functional oils (FO) from castor beans and cashew nut on beef cattle system during the early dry season (Experiment I) and during the finishing phase were evaluated the historical effect, keeping the treatments and methods intact (Experiment II).Area of study: These experiments were conducted at the Forage Crops and Grasslands section of São Paulo State University, “Julio de Mesquita Filho” (Unesp–Jaboticabal, São Paulo, Brazil).Material and methods: Two supplementation levels combined with two additives (four treatments in total) were evaluated: LSVM, low supplementation (0.3% body weight [BW]) with VM; LSFO, low supplementation (0.3% BW) with FO, HSVM, high supplementation (0.6% BW) with VM, and HSFO, high supplementation (0.6% BW) with FO. In both experiments, the experimental design was completely randomized with a 2 × 2 factorial arrangement (supplementation levels × additives).Main results: In Exp. I, the additive effect of VM provided greater average daily gain (ADG, p=0.02), higher supplementation level resulted in higher ADG (p=0.04) and the greatest crude protein apparent digestibility (p=0.002). However, no effects were observed between supplementation levels, additives, and interactions (p≥0.11) on voluntary intake and ruminal parameters. In Exp. II, LSVM treatment resulted in lower dry matter intake (p=0.04). Animals maintained on LSFO during the early dry season exhibited lower carcass yield (p=0.004).Research highlights: FO can be used to replace VM in beef cattle diet during the finishing phase in the feedlot without altering animal performance
The role of promotion tools used in the Spanish campaign to promote new lamb meat cuts
Aim of study: The first purpose of the present study was to investigate the level of recall of the adverting campaign promoting the new lamb meat cuts. The second objective was to investigate which promotion tools are more important to consumers and retailers.Area of study: This study took place in the city of Zaragoza, where lamb meat promotional activities have been conducted at three different levels: generic promotion of the sector, Regulatory Council of Ternasco de Aragón promotion campaign and producer brand promotion.Material and methods: Data was collected through personal questionnaires (401 consumers and 55 retailers).Main results: Results suggest that the promotion campaign has not contributed as much as expected to spread the knowledge of the new lamb cuts among consumers. Both consumers and retailers attached more importance to in-store marketing promotional tools. Three consumers segments were identified based on promotion tools preferences. Comparing between consumers and butchers’ opinion the only significant difference was found in using internet and social network as a promotional tool.Research highlights: A general trend has been observed since the majority of consumers and retailers consider that the most important promotions tools are those conducted inside the point of sale. On the view of these results, it could be better for future campaigns to increase promotional effort inside the point of sale, where consumers make their final purchase choice
Production systems and methods affect the quality and the quantity of saffron (Crocus sativus L.)
Aim of study: Comparison of saffron flowering between open field and controlled environment. Possibility of saffron transplanting.Area of study: University of Birjand (Iran)Material and methods: In a first experiment, saffron yield and quality produced by traditional production system (TPS) and by soilless one (SPS) were compared. In a second experiment, the effects of the production method, by direct planting (DP) or by transplanting plant (TP) in open field were studied.Main results: Percentage of flowering corms grown by SPS was 39% and 65%, while by TPS was 6% and 56% in 2018 and 2019, respectively. Flower and stigma yields were significantly higher by SPS than by TPS. Stigma obtained from SPS had higher L (lightness) and crocin. Safranal content was higher in stigma produced by TPS. Leaf and root numbers and corm weight were higher for SPS, but after transplanting there was better status for DP than for TP. At the end of the first growing season (2018-19), mean replacement corms weight (4.4 vs 3.0 g), replacement corms yield (21.3 vs 12.8 g per plant), weight of main replacement corm (11.7 vs 6.0 g) and number of large replacement corms (0.6 vs 0.1 corms per plant) for DP were significantly higher than for TP. However, during the second growing season (2019-20), the plants in TP plots improved their performances.Research highlights: Saffron production was more favorable under controlled environment. Transplanting is possible, but there is a need to improve methods to gain more favorable results
Short communication: Virulence of barley leaf rust in the South of Russia in 2017-2019
Aim of study: To analyze the structure of Puccinia hordei populations by virulence in southern Russia during 2017-2019.
Area of study: South of Russia, the leading Russian region for barley production where barley leaf rust is an important foliar disease.
Material and methods: Uredinial samples of P. hordei were collected at the production sites of winter barley in the south of Russia. Single uredinial isolates (total 95) were tested for virulence with 17 differentials with Rph resistance genes.
Main results: No isolates were found virulent to the host line with the Rph13 gene. There was a decrease in the number of fungal isolates virulent to the host lines with Rph5 and Rph7 genes. In 2017 and 2019, isolates containing a large number of virulence alleles (from 11 to 15) prevailed. In 2018, isolates with low (1-5) and medium (6-10) frequency of virulent alleles prevailed, as well as avirulent isolates. The values of the Nei index via diversity showed high similarity of the pathogen populations in 2017-2018 (N = 0.05) and minor differences in 2017-2019 and 2018-2019 (N = 0.13 and 0.16, respectively). The greatest frequency of virulence alleles in accordance with the Nei (Hs) index was noted for the 2018 population (Hs = 0.36). For the 2017 and 2019 populations, this indicator was on average Hs = 0.29 and 0.20, respectively.
Research highlights: Analysis of genetics of the P. hordei population is important for the strategy of varietal distribution in the region and development of rust-resistant cultivars