Scientific Journals of INIA (Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria)
Not a member yet
3042 research outputs found
Sort by
Mastitis diagnosis in ten Galician dairy herds (NW Spain) with automatic milking systems
Get PDFOver the last few years, the adoption of automatic milking systems (AMS) has experienced significant increase. However, hardly any studies have been conducted to investigate the distribution of mastitis pathogens in dairy herds with AMS. Because quick mastitis detection in AMS is very important, the primary objective of this study was to determine operational reliability and sensibility of mastitis detection systems from AMS. Additionally, the frequency of pathogen-specific was determined. For this purpose, 228 cows from ten farms in Galicia (NW Spain) using this system were investigated. The California Mastitis Test (CMT) was considered the gold-standard test for mastitis diagnosis and milk samples were analysed from CMT-positive cows for the bacterial examination. Mean farm prevalence of clinical mastitis was 9% and of 912 milk quarters examined, 23% were positive to the AMS mastitis detection system and 35% were positive to the CMT. The majority of CMT-positive samples had a score of 1 or 2 on a 1 (lowest mastitis severity) to 4 (highest mastitis severity) scale. The average sensitivity and specificity of the AMS mastitis detection system were 58.2% and 94.0% respectively being similar to other previous studies, what could suggest limitations for getting higher values of reliability and sensibility in the current AMSs. The most frequently isolated pathogens were Streptococcus dysgalactiae (8.8%), followed by Streptococcus uberis (8.3%) and Staphylococcus aureus (3.3%). The relatively high prevalence of these pathogens indicates suboptimal cleaning and disinfection of teat dipping cups, brushes and milk liners in dairy farms with AMS in the present study
Performance, behaviour and meat quality of beef heifers fed concentrate and straw offered as total mixed ration or free-choice
Get PDFEighteen Simmental heifers were fed concentrate and barley straw offered as a total mixed ration (TMR) or separately as a free choice (FCH) to compare performance, behaviour, and meat quality. The heifers were assigned to treatments in a randomized complete block design. Animals were allotted to roofed pens with 3 animals per pen, and 3 pens per treatment. Intake of concentrate, average daily gain, and gain to feed ratio were not different between diets, being on average 7.6 kg/day, 1.38 kg/day and 0.18 kg/kg, respectively. Straw intake was greater in TMR than in FCH treatment (0.7 vs 0.3 kg/day, respectively; p<0.001). Crude protein intake, neutral detergent fibre intake and water consumption did not differ between treatments. Time spent eating was longer in FCH than in TMR (p=0.001), whereas time spent ruminating and total chewing time were longer (p<0.01) in TMR than in FCH. The number of displacements resulting from competition for feed in the main feeder in TMR treatment tended to be greater than in FCH treatment. There were no differences in the carcass characteristics and quality of meat of animals assigned to the different feeding methods, but the percentage of 18:2 n-6 was higher in FCH treatment. In summary, these results suggest that the use of TMR as a feeding method in beef cattle fed high concentrate diets did not affect performance and increased time spent ruminating with a potential decrease of ruminal acidosis incidence
Testing of leachability and persistence of sixteen pesticides in three agricultural soils of a semiarid Mediterranean region
Get PDFLeaching, the movement of water and chemicals into deeper soil layers and groundwater is a subject of worldwide interest because a high percentage of drinking water is extracted from groundwater. The objective of this study was to evaluate the potential leaching and persistence of sixteen pesticides (one fungicide, three nematicides/insecticides, and twelve herbicides) for three Mediterranean agricultural soils with similar texture (clay loam) but different organic matter content (1.2-3.1%). Adsorption was studied in batch experiments and leaching was tested using disturbed soil columns (40 cm length × 4 cm i.d.). Degradation studies were carried out during 120 days under laboratory conditions. Mobility experiments showed that pesticides can be grouped according to their potential leaching. Thus, pesticides showing medium leachability were included in group 1 (referred as G1) while those with high leachability were termed as G2. The differences observed in the leachability can be attributed to the different organic carbon (OC) content in the soils (0.7-1.8%). Values of log KOC were higher in the order: soil C > soil B > soil A, which agrees with the OC content in each soil. The calculated half-lives ranged from 4.2 days for carbofuran in soil A to 330 days for prometon in soil C. As a general rule, when higher OC content in the soil the greater persistence of the pesticide was observed as a consequence of the increased adsorption. The first order kinetics model satisfactorily explains the disappearance of the studied pesticides in the soil
Increasing efficiency in ethanol production: Water footprint and economic productivity of sugarcane ethanol under nine different water regimes in north-eastern Brazil
Get PDFEthanol production in Brazil has grown by 219% between 2001 and 2012, increasing the use of land and water resources. In the semi-arid north-eastern Brazil, irrigation is the main way for improving sugarcane production. This study aimed at quantifying water consumed in ethanol production from sugarcane in this region using the water footprint (WF) indicator and complementing it with an evaluation of the water apparent productivity (WAP). This way we were able to provide a measure of the crop´s physical and economic water productivity using, respectively, the WF and WAP concepts. We studied sugarcane cultivation under nine different water regimes, including rainfed and full irrigation. Data from a mill of the state of Alagoas for three production seasons were used. Irrigation influenced sugarcane yield increasing total profit per hectare and economic water productivity. Full irrigation showed the lowest WF, 1229 litres of water per litre of ethanol (L/L), whereas rainfed production showed the highest WF, 1646 L/L. However, the lower WF in full irrigation as compared to the rest of the water regimes implied the use of higher volumes of blue water per cultivated hectare. Lower water regimes yielded the lowest economic productivity, 0.72 US/m3 for full irrigation. Since economic revenues are increased with higher water regimes, there are incentives for the development of these higher water regimes. This will lead to higher general crop water and economic productivity at field level, as green water is replaced by blue water consumption
Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils
Get PDFIrrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, θ, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control θ and h in the vadose zone: i) non-automatic and more time-consuming; ii) automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic). Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of θ and h, but with slight differences in computed annual drainage (711 mm and 774 mm). Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, θs, and the n and α van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher
Cattle mortality due to poisoning in Spain: a cross-sectional epidemiological study
Get PDFThe lack of nationwide public databases on poisoning in cattle makes it difficult to investigate this issue. Hence, we conducted an epidemiological study using the data on cattle poisoning provided by an insurance company (2000-2005), to determine the mortality rate due to poisoning in cattle in Spain and to assess the influence of the following variables: type of farming, age, sex, time of year, year and region. We observed a mortality rate of 23.25 per 100,000 animals in Spain with a higher rate in beef than dairy cattle (32.14 vs. 4.51 per 100,000 animals). There were also differences in the mortality rate between breeding cattle and future breeders, affecting dairy and beef cattle in a different way. In dairy cattle, we found differences between the years analysed. In beef cattle, the time of year with highest risk of poisoning was the last quarter (19.45 per 100,000 animals), while the lowest mortality rate was observed in the first quarter (1.33 per 100,000). There were pronounced differences between regions in beef cattle, differences being non-significant in dairy cattle. Lastly, in beef cattle, no differences were found between sexes. In summary, the mortality rate due to poisoning in cattle in Spain is low, and the risk of poisoning is determined by the farming system, animals’ stage of development, time of year and region
Species turnover during secondary succession in a laurel forest stand 60 years after clearcutting
No full textAim of study: The present study was designed to evaluate the effects of clearcutting and recovery of a laurel forest stand, 50 years after felling.Area of study: Laurel forest stand in Agua García, Tenerife (Canary Islands)Material and methods: Structural stand parameters were measured in a large patch of laurel forest.Main results: The results revealed that Erica arborea and Ilex canariensis have acted as pioneer species in the broad sense of the term, while Morella faya has remained abundant throughout the study. Persea indica became increasingly dominant throughout succession, as indicated by several different structural parameters.Research highlights: Recovery of the laurel forest after clearcutting has been possible in some areas without any further forest management, as indicated by the species composition and forest structure.Key words: Canary Islands; Ecological Restoration; Laurel forest; Succession
Quantitative analysis of forest fire extinction efficiency
Get PDFAim of study: Evaluate the economic extinction efficiency of forest fires, based on the study of fire combat undertaken by aerial and terrestrial means.Area of study, materials and methods: Approximately 112,000 hectares in Chile. Records of 5,876 forest fires that occurred between 1998 and 2009 were analyzed. The area further provides a validation sector for results, by incorporating databases for the years 2010 and 2012. The criteria used for measuring extinction efficiency were economic value of forestry resources, Contraction Factor analysis and definition of the extinction costs function.Main results: It is possible to establish a relationship between burnt area, extinction costs and economic losses. The method proposed may be used and adapted to other fire situations, requiring unit costs for aerial and terrestrial operations, economic value of the property to be protected and speed attributes of fire spread in free advance.Research highlights: The determination of extinction efficiency in containment works of forest fires and potential projection of losses, different types of plant fuel and local conditions favoring the spread of fire broaden the admissible ranges of a, φ and Ce considerably.Keywords: Forest fire; Combat efficiency; Productivity analysis.Abbreviations: FCS; Superficial Contraction Factor
Short-term and long-term effects of weed control and fertilization on growth and wood anatomy of a Populus deltoides clone
Get PDFAims of study: The short- and long-term effects of weed control and fertilization on growth and wood anatomy of 10-y-old Populus deltoides were investigated. Weed control and fertilization usually leads to an increase the growth rate of trees, and consequently, a possible modification in the quality of produced wood.Area of study: We analyzed trees from an experimental plantation in Buenos Aires, Argentina (34°50’ S Lat; 60°30’ W Long).Methods: 32 trees from three treatments: mechanical weed control (M), chemical and mechanical weed control (CHM) and fertilized plus chemical and mechanical weed control (CHM-F) were analyzed. Basal area, fibre morphology, cell wall area and vessel size were measured in the growth ring 1, 3 and 10.Results: differences on wood anatomy among treatments were mainly observed at the third year (short-term effect). Long-term negative effects were not observed. Fertilized trees had greater proportion and quality of wood closer to pith.Research highlights: fibre and vessel differences seen in CHM and CHM-F compared to controls in year 3 could be interpreted as evidence of maturation in cambial development (thicker, longer and wider fibres and greater vessels). The CHM-F treatment had a greater proportion of wood that showed characteristics of more mature wood.Key words: silvicultural treatment; wood quality; fibre properties; vessels; poplar; cambial maturity
Evaluation of olive flowering at low latitude sites in Argentina using a chilling requirement model
Get PDFOlive production has expanded significantly from the Mediterranean Basin into the New World over the last two decades. In some cases, cultivars of European origin have been introduced at a large commercial scale with little previous evaluation of potential productivity. The objective of this study was to evaluate whether a temperature-driven simulation model developed in the Mediterranean Basin to predict normal flowering occurrence and flowering date using cultivar-specific thermal requirements was suitable for the low latitude areas of Northwest Argentina. The model was validated at eight sites over several years and a wide elevation range (350–1200 m above mean sea level) for three cultivars (‘Arbequina’, ‘Frantoio’, ‘Leccino’) with potentially different chilling requirements. In ‘Arbequina’, normal flowering was observed at almost all sites and in all years, while normal flowering events in ‘Frantoio’ and ‘Leccino’ were uncommon. The model successfully predicted if flowering would be normal in 92% and 83% of the cases in ‘Arbequina’ and ‘Frantoio’, respectively, but was somewhat less successful in ‘Leccino’ (61%). When flowering occurred, the predicted flowering date was within ± 7 days of the observed date in 71% of the cases. Overall, the model results indicate that cultivar-specific simulation models may be used as an approximate tool to predict whether individual cultivars will be successful in new growing areas. In Northwest Argentina, the model could be used to identify cultivars to replace ‘Frantoio’ and ‘Leccino’ and to simulate global warming scenarios