Czech Technical University in Prague

Digital Library of the Czech Technical University in Prague
Not a member yet
    63969 research outputs found

    PLACE AND COMMUNITY

    No full text
    Komunita, která vzniká ve vazbě na místo, je fenomén, který v sobě pro člověka a jeho prostředí skýtá nepřeberné množství positiv. Přesto od něj náš svět spíše odklání .V této práci se pokouším prostřednictvím návrhu komunitního centra zjistit, zda a jak je možné v rámci našeho prostředí podpořit a pěstovat komunitu, která se identifikuje s místem, která si ho přivlastňuje a přebírá za něj zodpovědnost. Návrh je situován do objektu Nákladového nádraží Žižkov - místa, které již dávno neslouží svému účelu, které ale stále disponuje velkou historicko-technickou hodnotou a působivým geniem loci. Tato budova se nachází přímo ve středu nově vznikající čtvrti a je tedy jako stvořená pro to, aby se stala jejím přirozeným centrem. Nově je navíc ve vlastnictví města a může být tedy skutečně naplněna funkcemi, které budou sloužit místním obyvatelům. Návrh se zaobírá čelní budovou, kterou kvůli programovým požadavkům mění poměrně zásadně a čtyřmi prvními sekcemi křídel, kde se naopak mění pouze vnitřní dispozice. Návrh je organizován tak, aby jednotlivé instituce, které ho zaplní byly racionálně odděleny, ale aby zároveň umožňoval komunikaci mezi nimi - provozy spolu totiž vzájemně souvisí a v několika bodech se prolínají. Základním principem, je princip koncentrace různých fází kulturní tvorby do jednoho areálu. V zadních sekcích vznikne základní či střední škola ke které se přidruží i základní škola umělecká, případně jiné instituce tohoto typu. Tím vznikne první pilíř - tedy vzdělávání. V čelních sekcích, které budou nejlépe propojené a které jsou v rámci areálu na pomezí lokálních a městských vztahů, vznikne kluster funkcí, která budou podporovat a kombinovat umělecké a kulturní činnosti. Centrum by mělo dát možnost začínajícím žižkovským umělcům odrazit se od země a začít tvořit - ať už v oblasti hudby, výtvarného umění, divadla či jiné umělecké formy. Tvoří tak druhý pilíř procesu - tvorbu. Čelní budova samotná je místem vstupu do areálu, místem jehož podoba do velké míry reprezentuje podobu celého areálu, díky tomu, že se nachází přímo na hlavní ulici a co víc, na konci důležité žižkovské osy Olšanské třídy. Tato budova má proto být završením celého procesu a třetím pilířem - prezentací. Má se stát výkladní skříní areálu, kde umělci, kteří zde tvoří mají zároveň prostor, kde mohou své umění prezentovat komukoli, kde jde nebo projíždí kolem. Tímto způsobem areál umožní uměleckou realizaci ve včech fázích - vzdělávání, tvorbě i prezentaci. Na všech těchto fázích se nedílně podílí i komunita, které to zároveň pomáhá se aktivizovat a identifikovat se s místem, kde žijí skrze jeho lokální umění.The community that arises in connection with a place is a phenomenon that offers an abundance of positives for both people and their environment. Yet, our world tends to move away from it. In this work, I attempt, through the design of a community center, to explore whether and how it is possible to support and cultivate a community in our environmentone that identifies with a place, claims it as its own, and assumes responsibility for it. The design is situated in the building of the Žižkov Freight Stationa site that has long ceased to serve its original purpose but still possesses significant historical and technical value and an impressive genius loci. This building is located in the heart of a newly emerging district, making it a perfect candidate to become its natural center. Furthermore, it is now owned by the city, allowing it to truly fulfill functions that will serve local residents. The design focuses on the main building, which undergoes considerable changes due to programmatic requirements, and on the first four sections of the wings, where only the internal layout is altered. The design is organized so that the individual institutions occupying the space are rationally separated while still enabling interaction between them. The operations are interconnected and overlap at several points. The core principle is the concentration of various phases of cultural creation within a single complex. The rear sections will house an elementary or secondary school, accompanied by an arts elementary school or similar institutions. This creates the first pillareducation. The front sections, which are best interconnected and lie at the interface of local and municipal relationships within the complex, will feature a cluster of functions that support and combine artistic and cultural activities. The center should provide an opportunity for emerging artists from Žižkov to get a foothold and start creatingwhether in music, visual arts, theater, or other artistic forms. This forms the second pillar of the processcreation. The main building itself serves as the entrance to the complex, a space whose appearance largely represents the entire complex, as it is located directly on the main street and, more importantly, at the end of the important Žižkov axis of Olšanská Street. This building is therefore intended to culminate the entire process and represent the third pillarpresentation. It is to become the showcase of the complex, where the artists working here also have a space to present their art to anyone passing by. In this way, the complex enables artistic realization in all phaseseducation, creation, and presentation. In all these phases, the community plays an integral role, helping it become more active and identify with the place they live in through its local art

    CONVERSION OF THE BLANICE AREA IN TÝN NAD VLTAVOU

    No full text
    Tématem diplomové práce je návrh urbanistického řešení území bývalého areálu Blanice v Týně nad Vltavou. Návrh se zaměřuje na možnosti přesměrování dopravních cílů k ulici Veselská a podrobně řeší urbanistickou koncepci areálu ubytovny. Součástí je návrh nové uliční sítě, struktury zástavby a rozmanitých veřejných prostor. Projekt domova s pečovatelskou službou klade důraz na poskytnutí bezbariérového bydlení, vytvoření pracovních příležitostí a zajištění prostorů pro setkávání a pořádání aktivit určených pro seniory.The topic of the diploma thesis is the design of an urban solution for the former Blanice site in Týn nad Vltavou. The proposal focuses on redirecting traffic flows towards Veselská Street and thoroughly addresses the urban concept of the former accommodation facility area. It includes the design of a new street network, building structures, and diverse public spaces. The assisted living facility project emphasizes providing barrier-free housing, creating job opportunities, and ensuring spaces for social gatherings and activities designed for senior citizens

    The Historical Museum of Bosnia and Herzegovina: Preservation of a Modernist Gem in Sarajevo

    Full text link
    Budova Historického muzea Bosny a Hercegoviny se nachází v hlavním městě Sarajevu. Budova byla poškozena během obléhání Sarajeva v letech 1992-95 a nikdy nebyla řádně obnovena. V listopadu 2012 byla budova muzea prohlášena národní památkou Bosny a Hercegoviny. Cílem projektu bylo navrhnout vizi revitalizace Historického muzea a jeho přilehlého okolí, nalézt řešení pro lepší využití prostoru a udržitelnou funkci do budoucna a zároveň zachovat jeho architektonické kvality jako historické památky. Komplex budov tvoří výstavní sály, patro s centrálním výstavním prostorem a vnitřní zahradou, plošina, administrativní část budovy, sklady a konferenční sály. O rozšiřování muzea se diskutovalo radě let a potřeba dalších prostorů roste s tím, jak roste počet exponátu a cenností muzea. Stávající prostory jsou zaplněny a je mnoho funkčních ploch různého účelu se stale nevyhovujícími skladovacími plochami. Hlavním úkolem diplomové práce bylo zachovat stávající budovu a její vzhled s poskytnutím dalšího prostoru potřebného pro správné fungování muzea, s minimálním dopadem na původní architektonickou kvalitu budovy.The building of the History Museum of Bosnia and Herzegovina is located in the capital city, Sarajevo. The building was damaged during the 199295 siege of Sarajevo and has never been properly restored. In November 2012, the museum building was declared a national monument of Bosnia and Herzegovina. The goal of the project was to propose a vision for the revitalization of the History Museum and its adjacent surroundings, to find solutions for better use of space and a sustainable function for the future, while simultaneously preserving and enhancing its architectural qualities and historical value. The building complex consists of exhibition halls, a central exhibition space, an inner garden, a plateau, an administrative wing, storage depots, and conference halls. Discussions about expanding the museum have been ongoing for many years, as the need for additional space continues to grow alongside the increasing number of exhibits and valuables in the museums collection. The existing spaces have exceeded their full capacity, and many functional areas designed for specific purposes have been repurposed into inadequate storage areas. The primary task was to preserve the existing building and its original appearance while providing the additional spaces required for the proper functioning of the museum, with minimal impact on the buildings architectural qualities

    Primary School in Vlastina

    Full text link
    The diploma project deals with the existing primary school area, and the buildings that make up the school. The proposal seeks to rationalize the current operation and address the future operation of the school, which does not correspond to today's teaching conditions. Based on thorough analyzes of the condition, volume and layout of each building, it proposes a complete reconstruction of the non-conforming volumes, to improve them to todays conditions and regulations. Given the evolving need of a vital demographic group within the society, it is imperative to provide a solution that caters to the well being of children and serves to the broader interests to the community.The diploma project deals with the existing primary school area, and the buildings that make up the school. The proposal seeks to rationalize the current operation and address the future operation of the school, which does not correspond to today's teaching conditions. Based on thorough analyzes of the condition, volume and layout of each building, it proposes a complete reconstruction of the non-conforming volumes, to improve them to todays conditions and regulations. Given the evolving need of a vital demographic group within the society, it is imperative to provide a solution that caters to the well being of children and serves to the broader interests to the community

    SYSTEM OF PUBLIC SPACES OF THE TOWN CHEB

    No full text
    Diplomová práce se zaměřuje na návrh rozvoje systému veřejných prostorů města Chebu, který by odpovídal charakteru a potřebám daného města a zároveň doplňoval jeho celkový obraz. Urbanistické řešení integruje stávající a nově navržená veřejná prostranství do sítě městské zeleně, volné krajiny a sportovně-rekreačních areálů, čímž vytváří harmonický jednotný systém. Tímto způsobem vznikají nové vazby mezi různými funkčními oblastmi, které přirozeně navazují na historické centrum - srdce města.The diploma thesis deals with the design of the development of the system of public spaces in the town Cheb, responding to the character and needs of the town, and enhancing its image. The urban design integrates both existing and newly designed public spaces into the network of urban greenery, open landscape and sport recreational areas, thereby creating a harmonic unified system. This approach establishes new connections between the different functional areas, linking them to the historical center the heart of the city

    URBAN DEVELOPMENT OF PLZEŇ - LHOTA

    No full text
    V současné době fungování vesnice silně ovlivňuje její blízkost k Plzni jak fyzická, tak administrativní. Struktura novější zástavby je definována až překotným rozvojem, který může v dohledné budoucnosti ještě zesílit. Tento rozvoj je žádoucí odklonit od současné tendence nahrazovat okolní krajinu řídkými předměstími a využít jej pro vytvoření kvalitního a soběstačného sídla. Pokračovaní v zastavování rozsáhlých území v extravilánu předměstími s nízkou intenzitou dle studií poskytnutých městem Plzeň jednoznačně způsobí prohloubení fiskálních a sociologických problémů obce. Tato práce se snaží nastínit alternativní způsob rozvoje v podobě vytvoření intenzivního a soběstačného sídla při respektování současného charakteru obce. Základním pilířem zlepšení stavu sídla je jeho zahuštění. Návrh využívá část rozlohy rozvojových ploch stanovených územním plánem, při vytyčování hranic a charakteru zastavěných oblastí je ovšem dbáno na limity území definované nejen územním plánováním, ale i přírodními poměry v místě. Pro novou zástavbu byla zvolena hustota 60-70 obyvatel na hektar. Tato hodnota umožní výrazné zintenzivnění sídla při zachování jeho vesnického charakteru. Navrhovaná zástavba je situována ve třech lokalitách s bezprostředním kontaktem s ulicí K Sinoru. V lokálních centrech v rámci těchto lokalit je navržena odpovídající občanská vybavenost. Projekt lze vnímat ve čtyřech vrstvách: - Pěší propojení v rámci sídla, mezi obcí a extravilánem - Intenzivní obytná zástavba menších bytových domů a rodinných domů - Systém veřejné zeleně, jeho propojení s okolní krajinou a stabilní rozhraní intravilán extravilán - Robustní systém veřejné vybavenosti, využití významných prvků OV pro tvorbu lokálních centerCurrently, the functioning of the village is strongly influenced by its proximity to Plzeňboth physically and administratively. The structure of newer development is defined by a rapid growth that may intensify in the foreseeable future. This development is desirable to shift away from the current trend of replacing the surrounding landscape with sparse suburbs and instead utilize it to create a quality and self-sufficient settlement. Continuation of the development of extensive areas in the outskirts with low-intensity suburbs will, according to studies provided by the city of Plzeň, unequivocally deepen the fiscal and sociological problems of the municipality. This work aims to outline an alternative development approach in the form of creating an intensive and self-sufficient settlement while respecting the current character of the village. The fundamental pillar of improving the state of the settlement is its densification. The proposal utilizes part of the area designated for development by the urban plan, while ensuring that the boundaries and character of the built-up areas respect the limits defined not only by urban planning but also by the natural conditions of the site. For the new development, a density of 60-70 inhabitants per hectare has been chosen. This value will allow for a significant intensification of the settlement while maintaining its village character. The proposed development is situated in three locations with direct contact with K Sinoru Street. Appropriate civic amenities are proposed within the local centers of these areas. The project can be viewed in four layers: Pedestrian connections within the settlement, between the village and the outskirts Intensive residential development of smaller apartment buildings and family houses A system of public green spaces, its connection to the surrounding landscape, and a stable boundary between the built-up area and the outskirts A robust system of public facilities, utilizing significant public elements to create local centers

    INTERCULTURAL CENTER IN POSTOLOPRTY

    No full text
    Ve své práci reaguji na historické události konce války v Postoloprtech a s ním spojený násilný odsun českých Němců. Němci z Postoloprt, Žatce a okolních vesnic byli týráni v areálu Postoloprtských kasáren, které jsou v soukromém vlastnictví a byly roku 2016 zbourány. Otázka uctění památky zavražděným stále budí kontroverze. Záměrem investora je rozparcelování objektu na rodinné domky. S parcelou kasáren sousedí areál knížecího dvora, který je ve velmi špatném technickém stavu a vyžaduje akutní záchranu. (viz analytická část) Navrhuji nové funkční využití dvora a alternativní možnost využití pozemku kasáren, tak že je dávám do vzájemné souvislosti. Knížecí dvůr přeměňuji ve společenské interkulturní centrum s Českoněmeckým muzeem, umožňující mezigenerační setkávání bez předsudků. Na pozemku kasáren vytvářím památník odsunutým a zavražděným a koncipuji jej jako výchozí bod pietní stezky mezi Žatcem a Postoloprty.In my work, I respond to the historical events surrounding the end of the war in Postoloprty and the associated violent expulsion of Czech Germans. Germans from Postoloprty, Žatec, and nearby villages were subjected to mistreatment at the Postoloprty barracks, which were privately owned and demolished in 2016. The issue of commemorating the victims remains controversial. The investor's intention is to divide the site into plots for family houses. Adjacent to the barracks site is the princely courtyard area, which is in very poor technical condition and requires urgent preservation (see analytical section). I propose a new functional use for the courtyard and an alternative option for utilizing the barracks site, linking the two in a meaningful way. I transform the princely courtyard into a social intercultural center with a Czech-German museum, fostering intergenerational encounters free of prejudice. On the barracks site, I create a memorial for those expelled and murdered, designing it as the starting point of a commemorative trail between Žatec and Postoloprty

    Clinical and dosimetric evaluation of a novel inverse treatment planning system Leksell Gamma Knife Lightning

    Full text link
    Cílem této práce je klinické a dozimetrické zhodnocení nového plánovacího softwaru Leksell Gamma Knife Lightning. První část práce byla zaměřena na dozimetrii byla provedena kalibrace dávkového příkonu pomocí nového doporučení TRS 483 pro dozimetrii malých polí a změřeny relativní output faktory a tzv. end efekty pro různý počet izocenter, kde bylo ukázáno, že end efekty jsou skutečně kompenzovány (ve skutečnosti mírně překompenzovány), jak tvrdí dodavatel. V další části byla provedena analýza 80 klinicky použitých léčebných plánů napříč 4 nejčastějšími diagnózami mozkovými metastázami, meningeomy, adenomy hypofýzy a vestibulárními schwannomy. Každý plán byl přeplánován pomocí softwaru Lightning a pro oba plány byly sebrány předem stanovené parametry, které byly následně použity pro porovnaní obou plánů. V rámci studie bylo ukázáno, že Leksell Gamma Knife Lightning jednoznačně vytváří plány efektivněji a s lepšími parametry, než jaké zvládne vytvořit zkušený uživatel. Největší přínos představuje Lightning ve snižování dávek na kritické struktury při zachovaní či mírném zlepšení ostatních parametrů a také při zkracovaní doby léčby. Největší nedostatek představuje střední dávka do tumoru, která jako jediný parametr vyšla pro Lightning horší. Nakonec byly objednány a provedeny dva klinické audity, on-site a poštovní audit, které měly za ´úkol potvrdit správnost změřených dozimetrických veličin a v rámci on-site auditu byl také proveden end-to-end test plánovacího softwaru, který měl za úkol zkontrolovat celý řetězec od zobrazení až po samotné doručení dávky. Oba audity potvrdily správnost určení dozimetrických veličin.The aim of this thesis is the clinical and dosimetric evaluation of the new treatment planning software, Leksell Gamma Knife Lightning. The first part of the study focused on dosimetry. Dose rate calibration was performed using the new TRS 483 recommendation for small field dosimetry, and relative output factors, as well as the so-called end effects for various numbers of isocenters, were measured. The results demonstrated that the end effects are indeed compensated (in fact, slightly overcompensated), as claimed by the manufacturer. The next part involved the analysis of 80 clinically used treatment plans across the four most common diagnoses: brain metastases, meningiomas, pituitary adenomas, and vestibular schwannomas. Each plan was re-planned using the Lightning software, and sets of predefined parameters were collected for both treatment plans. These parameters were then used for a comparative analysis. The study showed that Leksell Gamma Knife Lightning unequivocally creates plans more efficiently and with better parameters than those achievable by an experienced user. Lightnings greatest benefit lies in reducing doses to critical structures while maintaining or slightly improving other parameters and shortening treatment times. The primary problem was the mean dose to the tumor, which was the only parameter where Lightning underperformed. Finally, two clinical audits on-site and postal were conducted to confirm the accuracy of the measured dosimetric quantities. During the on-site audit, an end-to-end test of the planning software was performed, verifying the entire process from imaging to dose delivery. Both audits confirmed the correctness of the dosimetric measurements

    Conceptual design of an ORC unit for waste heat utilization in industry

    Full text link
    Diplomová práce se zabývá možnostmi využití odpadního tepla z průmyslu pro výrobu elektrické energie pomocí technologie ORC. V teoretické části je analyzován současný stav v této oblasti a jsou rozebrány projekty, které již byly realizovány a fungují v praxi. Praktická část se zaměřuje na konceptuální návrh ORC zařízení pro konkrétní teplotní rozmezí, hmotnostní průtoky a vstupní tlaky, přičemž je kladen důraz na technicko-ekonomickou optimalizaci.The thesis examines the possibilities of utilizing waste heat from industrial processes to generate electricity using ORC technology. The theoretical part reviews the current state of the field and analyzes projects that have already been implemented and are operational. The practical part focuses on the conceptual design of an ORC system for specific temperature ranges, mass flow rates and input pressures, with an emphasis on techno-economic optimization

    Auto focus for thermal imaging camera

    No full text
    S rozvojem technologií infračerveného sledování a detekce se termokamery snadno integrují do moderních pozorovacích a monitorovacích systémů. Tyto kamery mají unikátní schopnost detekovat objekty a jevy, které tradičním kamerám často unikají. Dosažení přesného zaměření na objekt zůstává pro optimální využití jakékoli kamery zásadní. Při návrhu digitální kamery pro spotřebitele je třeba zjednodušit uživatelské prostředí, zejména pokud jde o způsob zaostřování pro snadnější manipulaci s kamerou. Manuální zaostřování je určitě přesnější a uživatel dosáhne očekávaných výsledků, ale může být poměrně náročné, pokud se scéna nebo ohnisková vzdálenost ke sledovanému objektu často mění nebo pokud neexistuje možnost manuální změny zaostření. Zvláštní pozornost je věnována návrhu a realizaci systému automatického zaostřování, který bude schopen detekovat optimální polohu zaostření a nastavit ji pomocí motorizovaného mechanismu. Důležitým aspektem této práce je volba FPGA (field programmable gate array) jako hlavní platformy pro implementaci systému automatického zaostřování. Použití FPGA umožňuje vysokorychlostní zpracování dat a efektivní řízení ostření přímo v modulu termokamery.As infrared surveillance and detection technology advances, infrared cameras are easily integrated into modern surveillance and monitoring systems. These cameras have the unique ability to detect objects and occurrences that often escape traditional video cameras. Obtaining accurate focus on an object remains a primary task for optimal usability of any camera. In consumer-level digital camera design, there is a requirement to simplify the user experience, especially with regard to the method of focusing for more convenient handling of the camera. Manual focusing is certainly more accurate and the user gets the expected results, but it can be quite exhausting if the scene or focal distance to the tracking subject frequently changes or there is no way to change the focus manually. Special attention is given to the design and implementation of an automatic focusing system that will be able to detect the optimal focus position and adjust it using a motorized mechanism. An important aspect of this thesis is the choice of FPGA (field programmable gate array) as the main platform to implement the autofocus. The FPGA allows for high speed data processing and efficient focus control directly in the infrared camera module

    21,874

    full texts

    63,969

    metadata records
    Updated in last 30 days.
    Digital Library of the Czech Technical University in Prague
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇