FACCE MACSUR Reports (Modelling European Agriculture with Climate Change for Food Security)
Not a member yet
471 research outputs found
Sort by
Operationalising sustainability impact assessment of land use scenarios in developing countries: A stakeholder-based approach with case studies in China, India, Indonesia, Kenya, and Tunisia
No full textGrowing populations, continued economic development, and limited natural resources are critical factors affecting sustainable development. Ex-ante impact assessment is an emerging field poised at the science-policy interface and is used to assess the potential impacts of policy while also exploring trade-offs between economic, social and environmental sustainability targets. The Framework for Participatory Impact Assessment (FoPIA) was selected for this study because it allows for the integration of various sustainability dimensions, the handling of complexity, and the incorporation of local stakeholder perceptions. FoPIA was adapted to the conditions of developing countries, and its implementation was demonstrated in five selected case studies. Based on the findings from the five case studies, FoPIA was found to be suitable for implementing the impact assessment at case study level while ensuring a high level of transparency. FoPIA supports the identification of causal relationships underlying regional land use problems, facilitates communication among stakeholders and illustrates the effects of alternative decision options with respect to all three dimensions of sustainable development
Vul’Clim – Climate change vulnerability studies in the region Auvergne (France)
No full textThe region Auvergne (France) is a major livestock territory in Europe (beef and dairy cattle with permanent grasslands), with a place in climate change regional studies assisting policy makers and actors in identifying adaptation and mitigation measures. Vul’Clim is a research grant (Bourse Recherche Filière) of the region Auvergne (February 2014-September 2015) to develop model-based vulnerability analysis approaches for a detailed assessment of climate change impacts at regional scale. Its main goal is the creation of a computer-aided platform for vulnerability assessment of grasslands, in interaction with stakeholders from a cluster of eco-enterprises. A modelling engine provided by the mechanistic, biogeochemical model PaSim (Pasture Simulation model) is the core of the platform. An action studies the changes of scales by varying the granularity of the data available at a given scale (e.g. climate data supplied by global scenarios) to let them being exploited at another scale (e.g. high-resolution pixels). Another action is to develop an assessment framework linking modelling tools to entry data and outputs, including a variety of components: data-entry manager at different spatial resolutions; automatic computation of indicators; gap-filling and data quality check; simulation kernel with the model(s) used; device to represent results as maps and integrated indicators
General outline of plans for an extension phase of MACSUR
No full textFACCE MACSUR has indicated a possible extension of funding by two years until May 2017 (phase 2).For phase 2, hub and theme coordinators suggest the following main activities, that will be discussed during the remainder of the meeting and in the coming months.Evolution, upscaling, and transfer of knowledge gained in regional case studies.Assessment of additional scenarios of socio-economic and climate trends.Further development of an interdisciplinary scientific community.Extending scaling methods for crop models to the European and global scale.Intensification of feed quality and animal health modelling with climate change.Economic models from farm to global level capable of reflecting climate change
Inventory of farm-scale models within LiveM
Get PDFThe aim of WP3 is to improve the assessment of the impact of climate change on livestock and grassland systems at the farm-scale. The first step in this process is to understand the current state of the art in farm-scale modelling, and the resources available within the MACSUR knowledge hub. Here, an inventory of the farm-scale models available within LiveM is presented, along with a summary of the types of model represented. Thirteen farm-scale models were identified, three of which focus on environmental aspects of farm systems (GHG emissions etc.) and ten of which focus on management strategies (productivity, economics etc.)
Statistical learning approach for modelling the effects of climate change on oilseed rape yield
Get PDFStatistical learning is a fairly new term referring to a set of supervised and unsupervised modelling and prediction techniques. It is based on traditional statistics but has been highly enhanced inspired by developments in machine learning and data mining. The main focus of statistical learning is to estimate the functions that quantify relations between several parameters and observed responses. These functions are further used for prediction, inference or a combination of both. For a particular case of quantitative responses, regularization techniques in regression are developed to overcome the weaknesses of ordinary least square (OLS) regression in prediction. These new shrinkage methods outperform OLS for prediction, especially in large datasets. In this study, a large dataset of field experiments on winter oilseed rape in Denmark for 22 years (1992 to 2013) was collected. Biweekly climatic data along with sowing date, harvest date, soil type and previous crop are considered as the explanatory variables. Yield of winter oilseed rape is considered as response variable. LASSO and Elastic Nets are the regularization techniques used to estimate the functions. Hold-one-out cross validation method for testing the prediction power reveals that these techniques are much useful in both prediction and inference. Since these techniques are included in recent versions of some software packages (e.g. R), they can be easily implemented by users at any level. The estimated function (model) is further used to predict the oilseed rape yield responses to climate change for several scenarios using representative weather data produced by a weather generator
Model inter-comparison on crop rotation effects – an intermediate report
No full textData of diverse crop rotations from five locations across Europe were distributed to modelers to investigate the capability of models to handle complex crop rotations and management interactions. Crop rotations comprise various main crops (winter/spring wheat, winter/spring barley, rye, oat, maize, sugar beet, oil seed rape and potatoes) plus several catch crops. The experimental setup of the datasets included treatments such as modified soils, crops exchanged within the rotations, irrigation/rainfed, nitrogen fertilization, residue management, tillage and atmospheric CO2 concentration. 19 modeling teams registered to model either the whole rotation or single crops. Models which are capable to run the whole rotation should provide transient as well as single year simulations with a reset of initial conditions. In the first step only initial soil conditions (water and soil mineral N) of the first year and key phenological stages were provided to the modelers. For calibration, crop yields and biomass were provided for selected years but not for all seasons. In total the combination of treatments and seasons results in 301 years of simulation. Results were analyzed to evaluate the effect of transient simulation versus single-year simulation regarding crop yield, biomass, water and nitrogen balance components. Model results will be evaluated crop-specifically to identify crops with highest uncertainty and potential for model improvement. Full data will be provided to modelers for model-improvement and results will provide insights into model capabilities to reproduce treatments and crops. Further, the question of error propagation along the transient simulation of crop rotations will be addressed
Development of methods for the probabilistic assessment of climate change impacts on crop production
Get PDFVarious attempts have been made to determine the relative importance of uncertainties in climate change impact assessments stemming from climate projections and crop models, respectively, and to analyse yield outputs probabilistically. For example, in the ENSEMBLES project, probabilistic climate projections (Harris et al. 2010) have been applied in conjunction with impact response surfaces (IRS), constructed by using impact models, to estimate the future likelihood (risk) of exceeding critical thresholds of crop yield impact (see, Fronzek et al., 2011, for an explanation of the method). In this task, we aimed to further develop and operationalize these methods and testing them in different case study regions in Europe. The method combines results of a sensitivity analysis of (one or more) impact model(s) with probabilistic projections of future temperature and precipitation (Fronzek et al., 2011). Such an overlay is one way of portraying probabilistic estimates of future impacts. By further accounting for the uncertainties in crop and biophysical parameters (using perturbed parameter approaches), the outcome represents an ensemble of impact risk estimates, encapsulating both climate and crop model uncertainties
Climate change impacts and adaptation strategies evaluation on staple food crops in different agro-climatic zones
No full textIncreasing temperatures, changed precipitation patterns and more frequent extreme events may lead to an increase in crop failure and to a substantial decrease of crop yields. The assessment of climate change impacts on agricultural sector has a particular interest to stakeholders and policy makers, in order to identify specific agricultural sectors and agro-climatic zones that could be more vulnerable to changes in climatic conditions and to develop the most appropriate policies to cope with these threats. For these reasons, the evaluation of climate change impacts for key crops in different agro-climatic zones was made exploring climate uncertainty and focusing on short period monitoring, which is particularly useful for food security and risk management. The analysis was made using the DSSAT-CSM (Decision Support System for Agrotechnology Transfer - Cropping System Model) software, version 4.5. Crop models implemented into DSSAT-CSM were used, for each selected crop, to evaluate climate change impacts on crop production. Multiple combinations of soils and climate conditions, crop management and varieties were considered for different agro-climatic zones. The climate impact was assessed using future climate projections, statistically and/or dynamically downscaled, for the specific areas. Direct and indirect effects of different CO2 concentrations, projected for the future periods, were separately explored to estimate their effects on crops. Finally, several adaptation strategies were evaluated with the aim to reduce the negative impact of climate change on crop production. The results of the study, analysed at local and regional scale, will be discussed
Effect of Increased Somatic Cell Count and Replacement Rate on Greenhouse Gas Emissions in Norwegian Dairy Herds
Get PDFDairy sector contributes around 4% of global greenhouse gas (GHG) emissions, of which 2/3 and 1/3 are attributed to milk and meat production, respectively. The main GHGs released from dairy farms are methane, nitrous oxide and carbon dioxide. The increased trend in emissions has stimulated research evaluating alternative mitigation options. Much of the work to date has focused on animal breeding, dietary factors and rumen manipulation. There have been little studies assessing the impact of secondary factors such as animal health on emissions at farm level. Production losses associated with udder health are significant. Somatic cell count (SCC) is an indicator on udder health. In Norway, around 45, 60 and 70% of cows in a dairy herd at first, second and third lactation are expected to have SCC of 50,000 cells/ml and above. Another indirect factor is replacement rate. Increasing the replacement rate due to health disorders, infertility and reduced milk yield is likely to increase the total farm emissions if the milking heifer replacements are kept in the herd. In this study, the impact of elevated SCC (200,000 cells/ml and above) and replacement rate on farm GHG emissions was evaluated. HolosNor, a farm scale model adapting IPCC methodology was used to estimate net farm GHG emissions. Preliminary results indicate an increasing trend in emissions (per kg milk and meat) as the SCC increases. Results suggest that animal health should be considered as an indirect mitigation strategy; however, further studies are required to enable comparisons of different farming systems
MACSUR Project – The case study of vineyards. Eco-physiological and biophysical modeling applied to the growth and productivity of vineyards in northwestern Italy.
Get PDFViticulture in Italy is one of the economically most important agricultural sectors. Recent research allows eco-physiological and biophysical models to develop tools able to provide support to the crop management, in terms of optimizing production performance and limiting environmental impacts. The ability to check on a daily basis the activities of vegetative and productive phases of vines is certainly a fundamental tool for the vineyard organization and management, and for linking the trends of growth and productivity with the quality of the final product: the wine. Since some years, some researches are taking place in the vineyards of northwestern Italy, with the aim of modeling the eco-physiological behavior of the vines, using and valorizing all available historical field data related to the vegetative and productive behavior of the vines, as well as laboratory qualitative data. At the same time, our team is evaluating two different modeling approaches: one biophysical, using the land surface scheme UTOPIA (University of TOrino land Process Interaction in Atmosphere), and another one eco-physiological. The case-study vineyards, referred to the northwestern Italian territory, is part of a wider working program involving several integrated teams from Italy, Spain and Germany. The objectives are: to improve the use of the models used by different groups; to compare the results obtained by different modeling tools; to create a common database of field measurements; to study the relationships between vegetative-productive behaviors and quality of productions