Journal of Nahdlatul Ulama Sidoarjo University
Not a member yet
1110 research outputs found
Sort by
PENGARUH SINERGI PEMASARAN DAN SINERGI TEKNOLOGI TERHADAP KINERJA PRODUK BARU PADA ERA DAN POST PANDEMI
No full textThis study aims to determine (1) the effect of marketing synergy and technology synergy on the performance of new products during the pandemic (2) the influence of technology synergy on the performance of new products during the pandemic (3) between marketing synergy and which technology synergy suggests a greater influence on new product performance. The sample in this study were MSME-based food and beverage businesses that are members of the Sidoarjo Food and Beverage Association. The research method used is quantitative research methods using SPSS 22 tools, as an analysis tool. The results of the analysis suggest that (1) marketing synergy can improve the performance of new products (2) technology synergy has a positive effect on the performance of new products (3) the results of the regression equation suggest that technology synergy has a greater influence than marketing synergy on the performance of new products
Pengolahan Limbah Cair Depo Pemasaran Ikan Kabupaten Sidoarjo Menggunakan Tumbuhan Mansiang (Scirpus grossus) dengan Sistem Kontiyu Reaktor
No full textDepo Pemasaran Ikan is the largest fish trading place in Sidoarjo Regency. It’s activities produce problems in the form of liquid waste originating from fish washing residue, fish washing waste that is brownish in color, cloudy and has a fishy smell, which has a very high content of organic matter and far so that it can pollute the environment. The purpose of this study was to determine the decrease in the degree of acidity (pH), Chemical Oxygen Demand (COD), and ammonium (NH4-N) in the waste using Scirpus grossus. The independent variable used was the variation in the number of plants (without plants, 5 plants and 10 plants). The waste used comes from the Fish Market Depot, Sidoarjo distric. The study began with the acclimatization process, then phytoremediation tests were carried out. Based on laboratory analysis, it was known that the best change in pH was obtained from a reactor with 10 plants, while the best COD and NH-4N were obtained from a reactor without plants
STRATEGI KEPALA SEKOLAH DALAM MENINGKATKAN KINERJA GURU
No full textThis writing uses a qualitative method, to explore in-depth as well as find factual narratives regarding various strategies of principals in improving teacher performance because teachers are the center of learning if quality teachers are ensured that schools will be advanced and quality graduates. The leadership role of the principal in an effort to improve teacher performance includes: a) educator, b) manager, c) administrator, d) supervisor, e) leader, f) creator of work climate and g) as an entrepreneur which in practice is carried out by instilling a cooperative attitude (cooperative), consultative, collegial (not hierarchical), and encourages the involvement of all teachers in every activity that supports school programs. While efforts to improve teacher performance, the principal has done the following: a) Fostering teacher discipline, b) Providing intrinsic and extrinsic motivation, c) Giving rewards, and d) Giving good perceptions. And to solve these problems, the Principal takes the following tips: a) To overcome the existence of teachers who are still in concurrent positions, the principal continues to strive to improve communication, coordination, and control of subordinates and select new teachers by requesting their ability to teach in one institution, b) To overcome the large number of teachers who are less competent, the principal continues to encourage teachers to continue their studies at a higher level, or take part in training, workshops, seminars, and others, c) In overcoming the accumulated burden teaching duties, then the principal determines the standardization of the teacher\u27s workload
Pelatihan Tata Kelola Keuangan di Desa Ngaban Kecamatan Tanggulangin: Pelatihan Tata Kelola Keuangan di Desa Ngaban Kecamatan Tanggulangin
No full textFinancial management requires a wise attitude in choosing which needs must bemet first and which needs can be delayed. In Indonesia, family financial management is theresponsibility of a mother. Therefore, the target of the community service being carried outis PKK mothers, namely PKK mothers in Ngaban Village. The purpose of this communityservice is to provide insight into the importance and ways of good (simple) family financialmanagement so that it can meet family needs in the present and the future. Face-to-facemeetings using the lecture method are followed by demonstrations of making simplefinancial reports. The stages of family financial management include several steps that arecarried out, namely determining family financial goals and objectives, re-collectinginformation about family finances, making and developing budget plans, analyzing budgetplans, carrying out budget planning, controlling and evaluating budgetsKeywords: financial governance, financial report
ANALISIS TINGKAT KESEHATAN BANK DENGAN MENGGUNAKAN METODE RGEC DAN DAMPAKNYA TERHADAP PENINGKATAN JUMLAH NASABAH
No full textCovid-19 has an impact on the weak economy of the community, banking sector is a sector that helps improve the economy of the community in the midst of the covid-19 pandemic. The level of health of the bank is in the interests of all relevant parties, both owners, bank administrators, community users of bank services, Bank Indonesia applies bank supervision authority or other parties. If the bank\u27s assessment is declared "healthy" or "very healthy", it will have an impact on increasing the number of customers be it the number of deposit customers, financing or services. The sample used in this investigation is financial dataPT. Bank Mandiri 2016-2020. The purpose of this study was to find out the influence of Risk Profile, Good Corporate Governance, Return on Asset, and Capital Adequacy Ratio on the increase in the number of customers at Bank Mandiri. The sample used in this study is the financial data of PT. Bank Mandiri 2016-2020. Data usage technique is to use SPSS. Based on the RGEC Test against Bank Mandiri it is known that Bank Mandiri\u27s performance in 2016-2017 has excellent Risk Profile, Good Corporate Governance, Return on Asset, and Capital Adequacy Ratio values. This study shows that risk profile, good corporate governance, return on asset, and capital adequacy ratio have an effect both partially and simultaneously on the increase in the number of employees in independent banks
PENINGKATAN HASIL BELAJAR PENDIDIKAN AGAMA HINDU MATERI SAD RIPU MELALUI MODEL PROBLEM BASED LEARNING PADA SISWA KELAS VI SDN PUCANG 1 SIDOARJO
No full textThe purpose of this study is to determine the effectiveness of the application of the Problem Based Learning model and the improvement of learning outcomes of Hindu Religious Education with Sad Ripu material through the Problem Based Learning model for the sixth grade students of Pucang 1 Elementary School. This research uses Classroom Action Research (CAR). The research subjects were 15 grade students. Data collection techniques using test and non-test techniques. Data collection was analyzed using quantitative and qualitative techniques. The results showed that student learning outcomes in the pre-cycle obtained a percentage of 33%, increased in cycle I by 73%, and increased in cycle II by 93%. Based on these results, it can be concluded that the application of the Problem Based Learning model is proven to improve learning outcomes of Hindu Religious Education with Sad Ripu material in grade VI Pucang 1 Elementary School
Analisis Perilaku Biaya Dan Pengaruhnya Terhadap Profitabilitas Perusahaan Developer (Studi Kasus Perusahaan Developer di Sidoarjo)
No full textThis research was conducted at the construction company developer PT Tiga Sinar Kreasindo (TSK) Sidoarjo. The purpose of this study was to determine the effect of cost behavior, fixed costs, variable costs, and semi-variable costs on company profitability consisting of ROA, ROE and NPM. The data used the company\u27s financial statement data in 2018. This study used a descriptive analysis method, with a total of 30 respondents and using the Special for Statistics Science (SPSS) software. The results showed the influence of cost behavior, fixed costs, variable costs and semi-variable costs have a significant influence on company profitability
Kemampuan Adsorben dari Limbah Serbuk Gergaji Kayu Jati terhadap Penurunan Kandungan Timbal (Pb) pada Limbah Cair dengan menggunakan Sistem Batch
No full textTeakwood sawdust is a by product of the sawmilling process used by industry and wood enterprises. One way to put the garbage to good use is to use it as a raw material for creating adsorbents for adsorbing heavy metals in waste water. The goal of this study is to use a batch system to investigate the ability of teakwood sawdust to adsorb lead (Pb) in liquid waste and to establish the optimal adsorption isotherm modeling in the adsorption process for the processing of lead (Pb) heavy metal waste. This is an experimental study that uses a variety of adsorbent masses, including 1 gram, 2 gram, 3 gram, 4 gram, and 5 gram, as well as a variety of adsorbent activation methods.According to the study\u27s findings, variations in the mass of adsorbent used 4 gram resulted in average absorption of 81.14 percent and 94.15 percent, respectively, while variations in the adsorbent activation method with the activation process and variations in the adsorbent activation method without the activation process resulted in an average absorption of 81.14 % and 94.15 %. respectively, while the average value of the adsorption capacity in The adsorption model isotherm langmuir with R2 value of 0,6537 is suitable for the adsorption process employing teakwood sawdust adsorbent.
Produksi Bahan Bakar Minyak (BBM) dari Sampah Botol Plastik Bekas Air Minum dengan Metode Pirolisis
No full textGarbage is the biggest contributor to environmental damage, especially plastic waste that is not processed properly. One of the problems in the community is the management of plastic waste, which until now has not been controlled. It is estimated that each person consumes 170 plastic bags each year and that around 500 billion to one trillion plastic bags are used worldwide. As well as more than 17 billion plastic bags distributed free of charge by supermarkets around the world for each year. In fact, if all the plastic bags on earth were opened, they could cover the entire surface of the earth up to 11 times. Plastic is a material that is very familiar in human life and has been considered a staple for household or domestic needs so that the presence of plastic waste is increasing. The purpose of this research is to convert plastic waste bottles used for drinking water into fuel oil using the pyrolysis method. The reactor used is pyrolysis with a temperature of 200 °C, 250 °C, 300 °C, 350 °C, and 400 °C for 30, 60, and 90 minutes. After the fuel is obtained, it is taken for analysis of its heating value, flash point, ash content, moisture content, and composition analysis. The results of this research will help the processing of plastic waste in addition to used plastic bottles
Penerapan Metode Quality Function Deployment dan Antropometri dalam Perancangan Desain Mesin Cacah Sampah Organik dan Non Organik
No full textThe Garbage is residual material that has been disposed of and is no longer used, so that waste is considered something disgusting by some people. Garbage has two types, namely organic waste and inorganic waste. Therefore, good waste management is needed so that every day waste does not accumulate and does not disturb the surrounding environment. The purpose of this research is to design a garbage chopper that is useful for chopping organic and inorganic waste to help the waste processing process so that there is no buildup every day. The design of this chopping machine is made multi-functional that can chop organic or inorganic types of waste, designed according to the wishes of consumers or users and made ergonomically. The method used in this research is the Quality Function Deployment (QFD) method and the user\u27s body Anthropometry so that the dimensions of the machine are in accordance with the user which causes the design to be ergonomic. The results of the research are to produce a design of organic and inorganic waste chopping machines that have specifications such as machines using mild steel so that they are easy to move, durable, speed up the chopping process because there is a speed setting, automatic. In addition, the machine has ergonomic dimensions from the results of the machine user\u27s body measurements using the anthropometric method