Advanced Electromagnetics (E-Journal)
Not a member yet
    299 research outputs found

    Integrated Millimeter-Wave Antennas for On-Chip Communication

    No full text
    This paper introduces the design and analysis of circularly polarized (CP) and dual-polarized on-chip microstrip antennas for wireless communication at 60 GHz. The CP on-chip antenna consists of a circular aluminum patch with two overlapped circular slots fed by the transmission line. The radiation characteristics of the CP have been analyzed using the finite integration technique and finite element method based electromagnetic solvers. The CP antenna introduces left-hand circular polarization and employs as on-chip transmitter. A design of dual-polarized on-chip microstrip antenna at 60 GHz is investigated and is employed as on-chip receiver. The dual ports of the dual polarized antenna are designed with high isolation between them in order to be used as a two on-chip receivers. The radiation characteristics of the dual-port antenna have been calculated. The effect of the separation distance between the CP-antenna and the dual-polarized antenna on the same chip has been investigated. The performance parameters like the reflection coefficient, transmission coefficient, and the transmission gain of the two antennas at different separation distances have been introduced

    Broadband TE10 to TE20 Mode Transformer for X Band

    No full text
    This paper deals with a broadband TE10 to TE20 mode transformer in a WR90 rectangular waveguide with more than 35 dB suppression of the fundamental mode and only 0.4 dB of maximum transformation loss. Two fin lines are employed with appropriate configuration in order to obtain a broadband mode transformation

    Different Designs of Dual-Focus Perforated Transmitarray Antenna in Near/Far-Field Region

    No full text
    Designs of the single-focus and multi-focused transmitarray antennas for the near-field (NF) or/and far-field (FF) applications have been introduced. Perforated dielectric single sheet is used for transmitarray design for simple configuration. Single-focus transmitarray for the far-field and the near-field are obtained. The radiation characteristics of 13×13 unit-cells transmitarray in the near-field and the far-field region have been investigated. A single structure multi-focus transmitarray is designed using the chess-board arrangement of the unit-cells elements. Multi-focus transmitarray for FF/FF, FF/NF, and NF/NF have been designed and investigated. The phase distribution and the corresponding holes radii for the first quadrant of the multi-focus transmitarray are presented. The radiation characteristics of different array configuration have been investigated and analyzed using full-wave simulator CST Microwave Studio

    Single/Dual-Polarized Infrared Rectenna for Solar Energy Harvesting

    No full text
    Single and dual linearly-polarized receiving mode nanoantennas are designed for solar energy harvesting at 28.3 THz. The infrared rectennas are used to harvest the solar energy and converting it to electrical energy.  The proposed infrared rectenna is a thin dipole made of gold and printed on a silicon dioxide substrate. Different shapes of the dipole arms have been investigated for maximum collected energy. The two poles of the dipole have been determined in a rectangular, circular and rhombus shapes. The rectenna dipole is used to concentrate the electromagnetic energy into a small localized area at the inner tips of the gap between the dipole arms. The dimensions of the different dipole shapes are optimized for maximum near electric field intensity at a frequency of 28.3 THz. A Metal Insulator Metal (MIM) diode is incorporated with the nanoantenna dipole to rectify the received energy. The receiving efficiency of the solar energy collector with integrated MIM diode has been investigated. A dual-polarized, four arms, rhombus shaped nanoantenna dipole for solar energy harvesting has been designed and optimized for 28.3 THz applications

    Light Spins of Cylindrical Electromagnetic Waves and their Jumps across Material Interfaces in the Presence of Energy Exchange

    No full text
    We investigate light spins for cylindrical electromagnetic waves on resonance. To this goal, we consider both a dielectric cylinder of infinite length immersed in vacuum and a cylindrical hole punched through a dense dielectric medium. In order for waves of constant frequencies to be established through lossless media, energy absorption is allowed in the surrounding medium to compensate for radiation loss. The dispersion relation is then numerically solved for an asymmetry parameter implying a balance in energy exchange. Numerical studies are performed by varying parameters of refractive index contrast, azimuthal mode index, and size parameter of a cylindrical object. The resulting data is presented mostly in terms of a specific spin, defined as light spin per energy density. This specific spin is found to be bounded in its magnitude, with its maximum associated with either optical vortices or large rotations. Depending on parametric combinations, the specific spin could not only undergo finite jumps across the material interface but also exhibit limit behaviors

    Attenuation in Superconducting Circular Waveguides

    No full text
    We present an analysis on wave propagation in superconducting circular waveguides. In order to account for the presence of quasiparticles in the intragap states of a superconductor, we employ the characteristic equation derived from the extended Mattis-Bardeen theory to compute the values of the complex conductivity. To calculate the attenuation in a circular waveguide, the tangential fields at the boundary of the wall are first matched with the electrical properties (which includes the complex conductivity) of the wall material. The matching of fields with the electrical properties results in a set of transcendental equations which is able to accurately describe the propagation constant of the fields. Our results show that although the attenuation in the superconducting waveguide above cutoff (but below the gap frequency) is finite, it is considerably lower than that in a normal waveguide. Above the gap frequency, however, the attenuation in the superconducting waveguide increases sharply. The attenuation eventually surpasses that in a normal waveguide. As frequency increases above the gap frequency, Cooper pairs break into quasiparticles. Hence, we attribute the sharp rise in attenuation to the increase in random collision of the quasiparticles with the lattice structure

    Frequency and Magnetic Field Dependence of the Skin Depth in Co-rich Soft Magnetic Microwires

    No full text
    We studied giant magnetoimpedance (GMI) effect in magnetically soft amorphous Co-rich microwires in the extended frequency range. From obtained experimentally dependences of GMI ratio on magnetic field and different frequencies we estimated the penetration depth and its dependence on applied magnetic field and frequenc

    Modeling and analysis of loaded multilayered magnetoelectroelastic structures composite materials: Applications

    No full text
    This paper presents the detailed analysis of fiber- reinforced magnetoelectroelastic composite plates. The work is divided into two major sections. The first one deals with the homogenization of the properties of each layer based on the Mori-Tanaka mean field approach where all the needed effective coefficients of each layer are determined. Then, in order to perform analysis of the considered, the Stroh formalism is used to provide solutions for multifunctional multilayered magnetoelectroelastic composites, to predict exactly the mechanical and electrical behaviors near or across the interface of material layers

    A Novel Wideband Magneto-Electric Dipole Antenna with Improved Feeding Structure

    No full text
    A novel feeding structure in magneto-electric dipole antenna is proposed and analyzed, which is simpler and better in performance than previous designs, involving differential feeding.  Due to this improved feeding structure, the antenna has achieved an impedance bandwidth of 133.3% ( 0.5 GHz – 2.5 GHz, resulting into an ultra-wide band antenna. The maximum broadside gain 7.5dBi with unidirectional radiation pattern has also been reported for the entire the range of operation. Symmetry in E-plane and H-plane radiation patterns has been observed due to the symmetry in structure and excitation of antenna. The antenna has also been able to achieve cross polarization levels

    Synthesis of Steered Flat-top Beam Pattern Using Evolutionary Algorithm

    No full text
    In this paper a pattern synthesis method based on Evolutionary Algorithm is presented. A Flat-top beam pattern has been generated from a concentric ring array of isotropic elements by finding out the optimum set of elements amplitudes and phases using Differential Evolution algorithm. The said pattern is generated in three predefined azimuth planes instate of a single phi plane and also verified for a range of azimuth plane for the same optimum excitations. The main beam is steered to an elevation angle of 30 degree with lower peak SLL and ripple. Dynamic range ratio (DRR) is also being improved by eliminating the weakly excited array elements, which simplify the design complexity of feed networks

    0

    full texts

    299

    metadata records
    Updated in last 30 days.
    Advanced Electromagnetics (E-Journal)
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇