Advanced Electromagnetics (E-Journal)
Not a member yet
299 research outputs found
Sort by
SH-TM mathematical analogy for the two-layer case. A magnetotellurics application
No full textThe same mathematical formalism of the wave equation can be used to describe anelastic and electromagnetic wave propagation. In this work, we obtain the mathematical analogy for the reflection/refraction (transmission) problem of two layers, considering the presence of anisotropy and attenuation -- viscosity in the viscoelastic case and resistivity in the electromagnetic case. The analogy is illustrated for SH (shear-horizontally polarised) and TM (transverse-magnetic) waves. In particular, we illustrate examples related to the magnetotelluric method applied to geothermal systems and consider the effects of anisotropy. The solution is tested with the classical solution for stratified isotropic media
Efficient CAD Model to Analysis of High Tc Superconducting Circular Microstrip Antenna on Anisotropic Substrates
No full textIn this paper, an electromagnetic approach based on cavity model in conjunction with electromagnetic knowledge was developed. The cavity model combined with London’s equations and the Gorter-Casimir two-fluid model has been improved to investigate the resonant characteristics of high Tc superconducting circular microstrip patch in the case where the patch is printed on uniaxially anisotropic substrate materials. Merits of our extended model include low computational cost and mathematical simplify. The numerical simulation of this modeling shows excellent agreement with experimental results available in the literature. Finally, numerical results for the dielectric anisotropic substrates effects on the operating frequencies for the case of superconducting circular patch are also presented
Study of Electron Beam on Electron Cyclotron Waves with AC Field in the Magnetosphere of Uranus
No full textIn this paper, we investigate the electromagnetic electron cyclotron (EMEC) waves in the magnetosphere of Uranus. By using the method of characteristic solution, the expression for dispersion relation is drawn. Following kinetic approach, the growth rate and real frequency of EMEC waves is studied theoretically, considering the injection of cold plasma beam in the Uranian system. The observations made by a space probe launched by NASA, Voyager 2, showed unusual orientation of planet’s spin axis and presence of more particles in high energy tail in Uranian magnetospheric plasma. Therefore, in this paper Kappa distribution is employed instead of usual Maxwellian distribution. The study is extended to the parallel as well as the oblique propagation of EMEC waves with variation in temperature anisotropy, number density of electrons and angle of propagation with respect to magnetic field direction. It is found that these parameters support the growth rate of EMEC waves. But response of real frequency of these waves is not same as that of growth rate for all the cases. Numerical analysis also revealed that as the ratio of number density of cold to hot plasma increases growth rate of EMEC waves also increases. Thus, denser the beam is injected, more the growth can be observed. These results are appropriate for applications to space plasma environments and magnetospheric regimes for detailed comparative planetary study
Triple-Notched Band CPW fed UWB Antenna with Metallic Reflector for High Gain Performance
No full textThis paper exhibits the design and performance of a coplanar waveguide (CPW) fed triple notched band ultra-wide band (UWB) antenna. Proposed prototype has two U-shaped slots on the patch and an inverted U slot in feed line with a metal reflector beneath the radiating element. Proposed structure renders wider impedance bandwidth extended between frequencies 2.71GHz to 12.92 GHz for VSWR < 2 with three rejection bands in the frequency ranges 3.456 to 3.988 GHz (WI-MAX IEEE 802.16), 5.27 to 6.032 GHz (WLAN IEEE 802.11 a/h/j/n) and 7.88 to 8.65 GHz (X-band down link satellite system) for VSWR > 2. The utmost simulated gain of proposed antenna with reflector is close to 9.9dBi at 7.4GHz. A sharp reduction observed in the efficiency values of the proposed structure at stop bands. Perhaps, this structure proved as a useful tool for various applications in modern communication systems including UWB
Low Radar Cross-section and Low Cost Dipole Antenna Reflector
No full textThis paper presents a method for reducing Radar CrossSection (RCS) of an increased gain metal backed dipole antenna. Numerical simulations were done and compared to a laboratory experiment. The results show that when a Perfect Electrical Conductor (PEC) is replaced by a Frequency Selective Surface (FSS), the antenna is still able to perform with the desired characteristics, but the RCS of the structure is greatly reduced out of band. The design of the FSS and the return loss, gain improvement, and RCS are presented for an antenna operating at 4.2GHz, and the results are compared with a conventional metal backed layout. Measurements show a good agreement with the simulations, and so the advantages on other structures from the reviewed literature are mentioned
A Novel Hammer-Shaped UWB Antenna with Triple Notched-Band for Rejecting RLS, WLAN and XSCS bands
No full textA novel hammer-shaped UWB printed antenna with triple notched stop bands is presented and fabricated on FR-4 substrate with size of 40×40×1.6 mm3. The proposed antenna is composed of hammer-shaped patch with C-shaped slot, U-shaped slot on feed line, and inverted stepped notch and bevel edges with pair of L-shaped slots in partial ground plane. The fabricated antenna is tested and obtained impedance bandwidth 2.89 ̶ 11.6 GHz with three notched stop bands 3.15 ̶ 3.7 GHz, 5.45 ̶ 6.8 GHz, and 7.5 ̶ 8.8 GHz, for radiolocation system (RLS), wireless local area networks (WLAN), and X-band satellite communication system (XSCS) bands, respectively. Moreover, the antenna result shows omnidirectional radiation pattern, average gain of 3.10 dBi over the whole UWB band except at the notched frequency bands
Fibonacci Sequences Quasiperiodic A5B6C7 Ferroelectric Based Photonic Crystal: FDTD analysis
No full textIn this study, we present an investigation of the optical properties and band structures for the conventional and Fibonacci photonic crystals (PCs) based on some A5B6C7 ferroelectrics (SbSBr and BiTeCl). Here, we use one dimensional SbSBr and BiTeCl based layers in air background. We have theoretically calculated the photonic band structure and transmission spectra of SbSBr and BiTeCl based PC superlattices. The position of minima in the transmission spectrum correlates with the gaps obtained in the calculation. The intensity of the transmission depths is more intense in the case of higher refractive index contrast between the layers. In our simulation, we employed the finite-difference time domain technique and the plane wave expansion method, which implies the solution of Maxwell equations with centered finite-difference expressions for the space and time derivatives
MEMS based monolithic Phased array using 3-bit Switched-line Phase Shifter
No full textThis article details the design of an electronically scanning phased array antenna with proposed fabrication process steps. Structure is based upon RF micro-electromechanical system (MEMS) technology. Capacitive type shunt switches have been implemented here to cater high frequency operation. The architecture, which is deigned at 30 GHz, consists of 3-bit (11.25º, 22.5º and 45º) integrated Switched-line phase shifter and a linearly polarized microstrip patch antenna. Detailed design tricks of the Ka-band phase shifter is outlined here. The whole design is targeted for future monolithic integration. So, the substrate of choice is High Resistive Silicon (ρ > 8kΩ-cm, tan δ =0.01 and ϵr =11.8). The overall circuit occupies an cross-sectional area of 20 × 5 mm2. The simulated results show that the phase shifter can provide nearly 11.25º/22.5º/45º phase shifts and their combinations at the expense of 1dB average insertion loss at 30 GHz for eight combinations. Practical fabrication process flow using surface micromachining is proposed here. Critical dimensions of the phased array structure is governed by the deign rules of the standard CMOS/MEMS foundry
Multiparameter Optimization for Electromagnetic Inversion Problem
No full textElectromagnetic (EM) methods have been extensively used in geophysical investigations such as mineral and hydrocarbon exploration as well as in geological mapping and structural studies. In this paper, we developed an inversion methodology for Electromagnetic data to determine physical parameters of a set of horizontal layers. We conducted Forward model using transmission line method. In the inversion part, we solved multi parameter optimization problem where, the parameters are conductivity, dielectric constant, and permeability of each layer. The optimization problem was solved by simulated annealing approach. The inversion methodology was tested using a set of models representing common geological formations
The GMD Method for Inductance Calculation Applied to Conductors with Skin Effect
No full textThe GMD method (geometric mean distance) to calculate inductance offers undoubted advantages over other methods. But so far it seemed to be limited to the case where the current is uniformly distributed over the cross section of the conductor, i.e. to DC (direct current). In this paper, the definition of the GMD is extended to include cases of nonuniform distribution observed at higher frequencies as the result of skin effect. An exact relation between the GMD and the internal inductance per unit length for infinitely long conductors of circularly symmetric cross section is derived. It enables much simpler derivations of Maxwell’s analytical expressions for the GMD of circular and annular disks than were known before. Its salient application, however, is the derivation of exact expressions for the GMD of infinitely long round wires and tubular conductors with skin effect. These expressions are then used to verify the consistency of the extended definition of the GMD. Further, approximate formulae for the GMD of round wires with skin effect based on elementary functions are discussed. Total inductances calculated with the help of the derived formulae for the GMD with and without skin effect are compared to measurement results from the literature. For conductors of square cross section, an analytical approximation for the GMD with skin effect based on elementary functions is presented. It is shown that it allows to calculate the total inductance of such conductors for frequencies from DC up to 25 GHz to a precision of better than 1 %