Scientific Bulletin of UNFU (Ukrainian National Forestry University)
Not a member yet
    2661 research outputs found

    Досвід, проблеми та перспективи розвитку садів на штучних основах у міському середовищі Києва

    Full text link
    This paper presents examining of the current state, challenges, and future prospects for developing gardens on artificial foundations in Kyiv urban environment, positioning them as an important tool for adapting urban spaces to ecological, social, and climate-related challenges. The growing need to find effective solutions for enhancing the environmental sustainability of urban areas in the context of increasing building density, limited natural soil availability, and climate change underscores the relevance of this study. The aim of the study is to evaluate the effectiveness of the development of gardens on artificial bases in the urban environment of Kyiv to improve the adaptation of urbanized spaces to environmental challenges. The methodology involves analyzing existing garden projects in Kyiv, classifying them by type, studying available data from official reports and urban development documents. The findings reveal that approximately 70 artificial foundation gardens are operational in Kyiv as of 2024, primarily private and concentrated in central urban areas. The most common types of gardens include green roofs, planted terraces, vertical gardens, and rain gardens. Extensive greening systems are prevalent, with a noticeable use of ground-covering and drought-resistant plant species. As a result, the study offers a typology of artificial-base gardens, categorizing them according to their functional purposes, structural features, and plant compositions. Furthermore, it establishes methodological approaches to monitoring such sites within the urban environment. The benefits of this study are significant for identifying realistic prospects for integrating artificial-base gardens into Kyiv spatial development strategy. It contributes to shaping the principles of municipal green infrastructure policy and provides a foundation for adapting best international practices to support ecological transformation of the city. Future research could focus on scaling these gardens and evaluating their long-term impact on urban sustainability.Виявлено, що розвиток садів на штучних основах у міському середовищі Києва є важливим інструментом адаптації урбанізованого простору до екологічних, соціальних і кліматичних викликів, що зумовлює актуальність дослідження в умовах зростання щільності забудови, дефіциту природного ґрунтового покриву, скорочення площі зелених зон і глобальних змін клімату. Методика дослідження передбачала аналіз офіційних звітів, картографічних матеріалів, відкритих баз даних і візуальних спостережень щодо наявних прикладів садів у Києві, їх типологізацію. Встановлено, що станом на 2024 рік у Києві функціонує близько 70 садів на штучних основах, які переважно мають приватний або комерційний характер і сконцентровані в центральних районах міста. Охарактеризовано чотири основні типи таких зелених об'єктів: зелені дахи, озеленені тераси, вертикальні сади та дощові садки. З'ясовано, що домінують екстенсивні системи озеленення з використанням ґрунтопокривних, посухостійких і невибагливих до догляду рослин, що дає змогу мінімізувати навантаження на несівні конструкції будівель і знижує витрати на утримання. Оцінено вплив таких садів на формування сприятливого мікроклімату, зниження температури повітря, поглинання забруднювальних речовин, нагромадження дощових вод, зменшення шумового фону та розширення рекреаційного потенціалу міських просторів. Виявлено закономірності розміщення об'єктів, що тяжіють до новобудов, офісних і торговельно-розважальних центрів, багатофункціональних урбаністичних ансамблів та об'єктів змішаного призначення. Систематизовано наявні об'єкти за критеріями функціонального призначення, конструктивних рішень і рослинного складу, що дало змогу розробити авторську типологію садів на штучних основах у межах мегаполісу. Запропоновано методичні підходи до моніторингу стану таких об'єктів, які можуть бути інтегровані в міське планування і використовуватись для підготовки стратегій розвитку зеленої інфраструктури. Перспективою подальших досліджень є поглиблене вивчення соціального, економічного та естетичного ефекту від інтеграції садів на штучних основах у просторову стратегію сталого розвитку Києва

    Вплив низової пожежі на природні букові лісостани Українських Карпат

    Full text link
    Systematic observation and long-term monitoring of the condition and dynamics of natural complexes, ecosystems, and climatic factors are integral components of the activities carried out by nature reserve fund institutions. In this context, the assessment of post-fire effects on natural beech (Fagus sylvatica) stands is of particular relevance to the research objectives of the scientific department of a national nature park. To this end, natural beech stands affected by surface fires in 2019 and 2020 were selected for study. The 2019 fire impacted a primeval beech forest, while the 2020 fire affected a middle-aged beech stand. Research was conducted on permanent sample plots established in 2024, employing standard methodologies commonly used in forest disturbance and regeneration studies. The findings indicate that, four years after the fire, the middle-aged beech stand is experiencing severe dieback. Based on phytosanitary assessment, the stand is classified as "declining," and the degradation of its photosynthetic apparatus is rated as "severely damaged." Nonetheless, significant natural regeneration has developed under the canopy, represented by 2-3-year-old seedlings and saplings, predominantly within the height classes ≤25 cm and 26–50 cm. These young individuals exhibit vigorous growth and reflect the species composition of the overstory. The herbaceous – shrub layer is characterized by high species abundance, which is atypical for undisturbed beech forests and indicates substantial alteration of site conditions. In contrast, the primeval beech forest was less severely affected by the surface fire. During the fifth year of post-disturbance, the stand phytosanitary condition is assessed as "weakened," with the photosynthetic apparatus rated as "slightly damaged." Natural regeneration beneath the canopy is abundant and primarily consists of 3-4-year-old individuals within the ≤25 cm height class, consistent with the composition of the parent stand. The proportion of older regeneration (originating before the fire) is low, accounting for only 27.3 %. The herbaceous – shrub layer has not yet recovered; only isolated species are present sporadically. To conclude, the study reveals that primeval beech forests demonstrate greater resilience to surface fire compared to middle-aged beech stands.Здійснення систематичних спостережень (моніторинг) за станом та динамікою природних комплексів та об'єктів, екосистем та клімату є невід'ємною складовою частиною установ природно-заповідного фонду. Зважаючи на завдання, які стоять перед працівниками наукового відділу Національного природного парку, дослідження впливу пожежі на природні букові лісостани є актуальними. Для цього підібрано природні букові лісостани, пошкоджені низовими пожежами у 2019 та 2020 роках. Так, у 2019 р. пожежа пошкодила буковий праліс, а у 2020 р. ‒ середньовіковий буковий лісостан. Дослідження здійснено на постійних пробних площах, закладених у 2024 році. Встановлено, що середньовіковий буковий деревостан на четвертий рік після низової пожежі за санітарним станом є всихаючим, а за ступенем деградації фотосинтетичного апарату ‒ "дуже ушкодженим". З'ясовано, що під його наметом сформувалася значна кількість самосіву і підросту, який представлений 2-3-річками, належить до висотних груп ≤25 см та 26-50 см, характеризується інтенсивним приростом і відповідає складу материнського деревостану. Для трав'яно-чагарникового ярусу характерна висока рясність видів, на відміну від лісостанів, не пошкоджених пожежею, що свідчить про істотну зміну умов. Порівняно із середньовіковим буковим деревостаном, низова пожежа не так істотно пошкодила буковий праліс. Встановлено, що деревостан на п'ятий рік після низової пожежі за санітарним станом є ослаблений, а за ступенем деградації фотосинтетичного апарату ‒ "слабо ушкоджений". Досліджено, що під його наметом сформувалося значна кількість самосіву і підросту, який представлений 3-4-річками, належить до висотної групи ≤25 см і відповідає складу материнського деревостану. Частка підросту, яку віднесено до групи старше 7 років (залишилася після пожежі), є незначною (27,3 %). Трав'яно-чагарниковий ярус не відновився: поодиноко трапляються окремі види. З'ясовано, що буковий праліс є стійкішим до низової пожежі, ніж середньовіковий буковий лісостан

    Вплив когнітивних викривлень на моделювання бізнес-процесів в інформаційних системах

    Full text link
    In the course of research of business process modelling in information systems, cognitive biases, as systemic deviations of thinking from logical rationality, are found to have a significant impact, causing errors in design, distortion of logic, and omission of critical stages of the process. It has been established that the most common types of cognitive biases in business modeling are the anchoring effect, confirmation bias, availability heuristic, overconfidence, halo effect, groupthink and status quo effect. Moreover, these biases can affect all stages of modelling, in particular, from the formation of requirements to the structuring of logic and model verification, with a reduction in the accuracy, completeness, and consistency of business logic construction. The impact of prior informing participants about typical cognitive biases on modeling results was assessed, characterizing differences in the quality of models created by participants who had instructions on recognizing biases compared to a control group that worked without such knowledge. Furthermore, an empirical study was conducted, in which two groups of participants modeled the online order processing: one without additional instructions, the other with instructions on cognitive biases. It was found that the participants in the experimental group demonstrated better results in all indicators as follows: accuracy of logic (8.1 vs. 6.4), completeness of steps (8.5 vs. 6.9), and significantly fewer errors related to biases (1.3 vs. 4.2). The most destructive bias was confirmation bias, which led to the ignoring of alternatives and insufficient verification of data. The feasibility of including knowledge about cognitive biases in the methodology of information system modeling was substantiated. The areas for improvement are proposed, including user training, facilitation of team modeling, application of validation mechanisms, and the prospect of developing specialized software tools for automatic detection of signs of bias in the modeling process. Therefore, increasing the cognitive awareness of developers and analysts is emphasized to be a key factor in improving the quality of digital modeling and management decision-making in the context of the growing complexity of IT systems.Виявлено, що когнітивні викривлення (КВ), як системні відхилення мислення від логічної раціональності, мають значний вплив на процес моделювання бізнес-процесів (МБП) в інформаційних системах, зумовлюючи помилки у проєктуванні, спотворенні логіки та пропущенні критичних етапів процесу. Встановлено, що найпоширенішими типами когнітивних викривлень у сфері бізнес-моделювання є ефект якоря, підтверджувальне упередження, евристика доступності, надмірна впевненість, ефект ореолу, групове мислення та ефект статусу-кво. З'ясовано, що ці викривлення здатні впливати на всі етапи моделювання – від формування вимог до структурування логіки та перевірки моделі зі зниженням точності, повноти та послідовності побудови бізнес-логіки. Оцінено вплив попереднього інформування учасників про типові когнітивні викривлення на результати моделювання, де охарактеризовано відмінності як моделей, створених учасниками, що мали інструкції щодо розпізнавання викривлень, порівняно з контрольною групою, яка працювала без таких знань. Проведено емпіричне дослідження, в якому моделювання процесу оброблення онлайн-замовлення здійснювали дві групи учасників: одна – без додаткових вказівок, інша – з інструкціями щодо когнітивних викривлень. Встановлено, що учасники експериментальної групи продемонстрували кращі результати за всіма показниками: точність логіки (8,1 проти 6,4), повнота кроків (8,5 проти 6,9) і значно менша кількість помилок, пов'язаних з викривленнями (1,3 проти 4,2). Найдеструктивнішим виявилося підтверджувальне упередження, що спровокувало ігнорування альтернатив і недостатню перевірку даних. Обґрунтовано доцільність внесення знань про когнітивні викривлення до методології моделювання інформаційних систем. Запропоновано напрями вдосконалення методології моделювання – інструктаж користувачів, фасилітація командного моделювання, застосування механізмів валідації, а також перспективу розроблення спеціалізованих програмних засобів для автоматичного виявлення ознак викривлень у процесі моделювання. Наголошено, що підвищення когнітивної обізнаності розробників і аналітиків може стати ключовим чинником покращення якості цифрового моделювання та ухвалення управлінських рішень за умов зростання складності ІТ-систем

    Природоохоронна та функціональна значущість старовікових лісів Ківерцівського національного природного парку "Цуманська пуща"

    Full text link
    The important role of Kivertsi National Nature Park "Tsumanska Pushcha" in preserving old-growth forests as natural ecosystems, the disappearance of which in Ukraine, and in the world as a whole, has become an urgent environmental problem, is reflected in the paper. Most areas of such forests are located in the reserve zone of the park, which confirms their high nature environmental, functional and social significance. The importance of studying the structural and functional organization of old-growth forests as reference ecosystems is emphasized. The variability in the interpretation of the term "old-growth forests" used in foreign literature is shown. The feasibility of recognizing the category "old-growth forests" for fast-growing tree species (alder, hornbeam, aspen, birch) based on their age of maturity, the remaining stands of which are protected in protected areas of national nature parks, was considered. These forests are also specific biotopes of the existence of individual zoocenoses and phytocenoses, as well as habitats of populations of rare species of plants and animals, ensuring their vital activity, which confirms the functional importance of preserving them as old-growth forests. The historical changes in the economic use of the forests of Tsumanska Pushcha as part of Volyn Polissya during the 16th-20th centuries are shown, their role as a source of wood for the development of trade, the emergence of crafts and the formation of industry in the region is reflected. The transforming impact of man on forests is shown as well. A significant reduction in the natural forest cover of the region in the 17th century necessitated the need for artificial (silvicultural) forest restoration. The effectiveness of the comprehensive studies conducted to reflect the structural and functional organization of the ecosystems of old-growth forests is noted. The possibility of artificially created stands acquiring the features of a natural old-growth forest is considered. Thus, we can draw the conclusion that old-growth forests can be a model for reforming the structure of natural forests or monospecies forest crops. Environmental protection decisions regarding the preservation of old-growth forests of Kivertsi National Nature Park "Tsumanska Pushcha" are socially significant, contributing to the development of many types of environmental services, and providing associated benefits for the economy and population of the region.Висвітлено важливу роль Ківерцівського національного природного парку "Цуманська пуща" у збереженні старовікових лісів як природних екосистем, зникнення яких в Україні, та й у світі загалом, стало актуальною екологічною проблемою. Більшість ділянок таких лісів перебувають у заповідній зоні парку, що підтверджує їх високу природоохоронно-функціональну і соціальну значущість. Наголошено на важливості вивчення структурно-функціональної організації старовікових лісів як еталонних екосистем. Показано варіабельність трактування вживаного у зарубіжній літературі терміна "старовікові ліси". Розглянуто доцільність визнання категорії "старовікові ліси" для швидкорослих деревних порід (вільхи, граба, осики, берези) за віком їх стиглості, перестійні деревостани яких охороняють у заповідних зонах національних природних парків. Ці ліси також є специфічними біотопами (biotopes) існування зооценозів та фітоценозів, а також оселищами (habitats) для популяцій рідкісних видів рослин і тварин, забезпечуючи їх життєдіяльність, що підтверджує функціональну важливість їх збереження як старовікових лісів. Показано історичні зміни господарського використання лісів Цуманської пущі як частини Волинського Полісся впродовж XVІ-XX століть, їх роль як джерела деревини для розвитку торгівлі, виникнення ремесел та становлення промисловості у регіоні. Відображено трансформувальний вплив людини на ліси, значне зменшення природної лісистості краю у XVII ст., що зумовило потребу штучного (лісокультурного) відновлення лісів. Відзначено результативність проведених комплексних досліджень для відображення структурно-функціональної організації екосистем старовікових лісів. Розглянуто можливість набуття штучно створеними деревостанами ознак природного старовікового лісу. Зроблено висновок, що старовікові ліси можуть бути зразком для реформування структури природних похідних лісів чи моновидових лісових культур. Природоохоронні рішення щодо заповідання старовікових лісів Ківерцівського НПП "Цуманська пуща" є соціально значущими, сприяють розвитку багатьох видів екологічних послуг і надають супутні вигоди для економіки та населення регіону

    Моделі та засоби штучного інтелекту для відстеження правильності виконання фізичних вправ

    Full text link
    This study examines the prospects for using machine learning algorithms and artificial intelligence tools in the field of health and fitness, in particular the application of computer vision technologies to track physical training. The feasibility of employing a pretrained model without additional fine-tuning has been substantiated due to the high similarity between the target task of tracking body landmarks during physical exercise execution and the general task of human pose estimation. This approach also enables the avoidance of time and computational costs associated with data collection and training of a 3D neural network model. Pose detection models with prediction speeds suitable for real-time data processing applications have been analyzed. The principles of operation of landmark tracking models PoseNet, MoveNet, and BlazePose from the TensorFlow.js library have been examined, through a detailed analysis of the underlying concepts and approaches for high-dimensional prediction of human body part positions in real time, as well as a discussion of their advantages and limitations. The suitability of the BlazePose neural network for real-time pose estimation has been established. The model predicts 33 keypoints, enabling high prediction accuracy and facilitating the processing of complex physical exercises. The necessity of implementing an algorithm for counting exercise repetitions on the client side has been identified, as processing data directly within the browser eliminates the need for complex network-based data transmission. This, in turn, reduces data processing latency and ensures a more accurate alignment between real-time events and their visual representation. The solution utilizes the BlazePose convolutional neural network, the device camera, and the Web Speech API service to track the users body positions and provide feedback on exercise performance. A web application has been developed, and a general algorithm for its operation has been described. The algorithm comprises the next two main stages: the input and processing of data related to physical exercises, followed by storage in the system database; and the use of this data within the algorithm for determining the number of completed full repetitions of a given exercise. The repetition counting algorithm has been integrated into the developed web application to evaluate its effectiveness and operational stability during real-time training sessions. The algorithm was tested for push-ups and squats in both home and gym environments under high-quality and satisfactory lighting conditions. The reliability and effectiveness of utilizing the pretrained BlazePose model within the developed web application for fitness and sports activities were evaluated. The study highlights the dependency of prediction quality on environmental conditions and the speed of exercise execution.Розглянуто перспективи використання алгоритмів машинного навчання та засобів штучного інтелекту у сфері охорони здоров'я та фітнесу, зокрема застосування технологій комп'ютерного зору для відстеження фізичних тренувань. Доведено доцільність застосування методу використання переднавченої моделі без донавчання через високу схожість цільової задачі відстеження контрольних точок тіла виконавця фізичної вправи та задачі відстеження положень людського тіла, а також уникнення витрат часу та обчислювальних ресурсів, пов'язаних зі збиранням даних та тренуванням 3D-моделі нейронної мережі. Проаналізовано моделі детекції положень частин тіла людини, швидкість передбачень яких дає змогу використовувати їх у застосунках для опрацювання даних у реальному часі. Досліджено принципи функціонування моделей відстеження контрольних точок тіла особи, а саме – PoseNet, MoveNet, BlazePose бібліотеки TensorFlow.js, проаналізовано використані ідеї та підходи до багатовимірного передбачення положень частин тіла людини у реальному часі, зазначено їхні переваги та недоліки. Встановлено доцільність використання згорткової нейронної мережі BlazePose для прогнозування положення частин тіла людини в реальному часі. Ця модель передбачає 33 контрольні точки, що дасть змогу забезпечити високу точність передбачень та уможливить опрацювання складних фізичних вправ. З'ясовано потребу реалізації алгоритму обчислення кількості виконаних повторень фізичної вправи з боку клієнта, оскільки опрацювання даних безпосередньо у браузері усуває потребу у складних процесах передавання інформації мережею, що, водночас, сприяє зниженню затримок оброблення даних і забезпечує точнішу відповідність між подіями в реальному часі та їхнім відеовідображенням. Використано згорткову нейронну мережу BlazePose, камеру пристрою та сервіс Web Speech API для відстеження положень тіла людини та надання зворотного зв'язку про ефективність її тренування. Створено вебзастосунок та описано загальний алгоритм його роботи, який складається з двох етапів, а саме внесення та опрацювання даних про фізичні вправи із подальшим зберіганням у базі даних системи та використання цих даних в алгоритмі визначення кількості виконаних людиною повних повторень фізичної вправи. Здійснено інтеграцію алгоритму обчислення кількості виконаних повторень фізичної вправи у розроблений вебзастосунок з метою оцінювання ефективності та стабільності його роботи у реальному часі в ході тренувань. Апробовано функціонування алгоритму для віджимань та присідань в домашніх умовах і у спортивному залі з якісним та задовільним освітленням. Оцінено надійність та ефективність використання переднавченої моделі BlazePose у розробленому вебзастосунку для занять фітнесом і спортом, вказано на залежність якості передбачень від середовища та швидкості виконання вправи

    Оцінювання динамічної характеристики автомобіля після ремонту циліндро-поршневої групи двигуна

    No full text
    Assumptions are formulated regarding road profile, rolling resistance, and gear shift duration to evaluate the dynamic properties of the vehicle. The duration and path of acceleration to a certain speed of trucks are considered. In the course of research, it was found that there are analytical methods for this, but with certain limitations. Therefore, we have applied more correct methods, namely, integration of the given dependencies of the acceleration duration by numerical methods. It is noted that it is necessary for trucks to compare the maximum total resistance (rolling and lifting) of the road, which the car can overcome in the first and highest gear without switching to a lower gear, which is estimated by the dynamic factor. It is established that with an increase in the cylinder diameter, the engine torque undergoes changes, and the remaining design parameters remain unchanged. The results of calculating the dependence of the change in the dynamic factor on the speed of the car with the nominal and repair dimensions of the engine cylinders are presented. It is found that the maximum dynamic factor in the first gear of a car with comparable dimensions of the internal combustion engine cylinders is observed at a speed vDmax = 8.57 km/h and is accordingly Dmax n = 0.341 and Dmax v = 0.355. It was revealed that increasing the cylinder diameters contributes to an increase in the maximum dynamic factor, as well as the maximum torque of the ICE, by 4 %, which will allow the car to overcome a larger angle of elevation of the road and the coefficient of its rolling resistance, as well as increase the acceleration of the ICE by 4.3 %. Moreover, a characteristic analysis was carried out, which allowed us to state that the maximum dynamic factor in direct transmission for a car with increased dimensions of the ICE cylinders increased by 4.7 %. The expansion of the speed range of stable movement of the car was established, which is justified by a significant increase in the share of rolling resistance and air forces in the overall balance of traction force distribution. It was assumed that to compare the acceleration dynamics of a car with nominal and restored ICE cylinders, the acceleration of the ICE should be estimated. Calculations were carried out and graphs of car accelerations in different transmission gears with the compared ICEs depending on the speed of movement were constructed.Сформульовано припущення стосовно профілю дороги, опору коченню, тривалості перемикання передач для оцінювання динамічних властивостей автомобіля. Розглянуто тривалість та шлях розганяння до певної швидкості вантажівок. З'ясовано, що для цього існують аналітичні методи розв'язку, проте з певними обмеженнями. Застосовано більш коректні способи, а саме – інтегрування числовими методами наведених залежностей тривалості розганяння. Зазначено, що для вантажівок варто порівняти граничні сумарні опори (коченню та підйому) дороги, які може подолати автомобіль на першій та вищій передачі без перемикання на нижчу, що оцінюють динамічним чинником. Встановлено, що в разі збільшення діаметра циліндра зміни зазнає обертовий момент двигуна, а решта параметрів конструкції залишаються незмінними. Наведено результати розрахунку залежності зміни динамічного чинника від швидкості руху автомобіля з номінальним та ремонтним розмірами циліндрів двигуна. З'ясовано, що максимальний динамічний чинник на першій передачі автомобіля з порівнюваними розмірами циліндрів двигуна внутрішнього згоряння (ДВЗ) зафіксовано за швидкості vDmax = 8,57 км/год й становить, відповідно, Dmax п = 0,341 та Dmax в = 0,355. Виявлено, що збільшення діаметрів циліндрів сприяє зростанню максимального динамічного чинника, як і максимального обертового моменту ДВЗ, на 4 %, що дасть змогу автомобілю подолати більший кут підйому дороги та коефіцієнт опору його коченню, а також пришвидшити автотранспортний засіб (АТЗ) на 4,3 %. Проведено аналіз характеристики, який дав можливість констатувати, що для автомобіля зі збільшеними розмірами циліндрів ДВЗ максимальний динамічний чинник на прямій передачі підвищився на 4,7 %. Встановлено розширення діапазону швидкостей стійкого руху автомобіля, що обґрунтовано значним зростанням частки сил опору коченню та повітря у загальному балансі розподілу тягової сили. Констатовано, що для порівняння динаміки розганяння автомобіля з номінальними та відновленими циліндрами ДВЗ варто оцінити пришвидшення АТЗ. Проведено розрахунки й побудовано графіки пришвидшень автомобіля на різних передачах трансмісії з порівнюваними ДВЗ залежно від швидкості руху

    LLMAGENTNET: КОЛАБОРАТИВНА МЕРЕЖА АВТОНОМНИХ АГЕНТІВ ШТУЧНОГО ІНТЕЛЕКТУ ДЛЯ ВИКОНАННЯ СКЛАДНИХ ЗАВДАНЬ

    No full text
    Recent advancements in Large Language Models (LLMs) have opened new horizons for building autonomous AI agents capable of executing complex, multi-step tasks across a wide range of domains. Despite this progress, existing multi-agent systems often suffer from limited interoperability and extensibility due to rigid communication protocols, closed ecosystems, and monolithic architectural assumptions. To address these limitations, we introduce LLMAgentNet – a collaborative, modular framework designed for orchestrating multiple autonomous AI agents that leverage LLMs for planning, reasoning, and execution. The LLMAgentNet framework is based on a decentralized agent architecture in which agents can communicate and collaborate using standardized RESTful API calls. By utilizing the OpenAPI Specification, LLMAgentNet enables seamless integration of both native and external agents, including those developed using other frameworks or hosted on different platforms. Each agent in the system is capable of interpreting high-level user requests, breaking them down into sub-tasks, selecting appropriate tools or agents for execution, and maintaining contextual memory across task sequences. A distinctive feature of LLMAgentNet is its hierarchical Agent Manager (Orchestrator), which coordinates interactions, maintains execution trajectories, and optimizes the use of specialized agents. The system supports multiple operational modes – Human-in-the-Loop, Human-on-the-Loop, and Human-out-of-the-Loop – enabling both supervised development and fully autonomous operation. Notably, LLMAgentNet includes a memory mechanism that allows agents to access and update knowledge bases via vector databases (e.g., ChromaDB), supporting long-term memory, runtime variables, and contextual reasoning. The framework has been benchmarked using standard datasets such as HotPotQA and in practical use cases such as content marketing automation, demonstrating significant improvements in efficiency and quality over manual or single-agent approaches. By enabling collaboration, reflection, and self-improvement among AI agents, LLMAgentNet contributes to the development of general-purpose intelligent systems and marks a critical step toward the realization of Artificial General Intelligence (AGI).Досліджено нові можливості, що відкриваються завдяки стрімкому розвитку великих мовних моделей (LLM), особливо у сфері створення автономних агентів штучного інтелекту, здатних до багатокрокового планування та виконання складних завдань. Проаналізовано недоліки наявних мультиагентних фреймворків, зокрема їхню архітектуру, залежність від конкретних інструментів і масштабованість. Для подолання цих обмежень запропоновано LLMAgentNet – модульну мережу взаємодіючих агентів, які співпрацюють завдяки LLM, використовуючи RESTful API як універсальний комунікаційний інтерфейс. Такий підхід забезпечує незалежну взаємодію між агентами та зовнішніми інструментами, дає змогу ділити запити високого рівня на підзавдання та виконувати їх автономно на підставі специфікації OpenAPI. У системі передбачено спеціальний менеджер агента (англ. Orchestrator), який відповідає за декомпозицію запитів, вибір виконавців та узгодження потоків даних між агентами. Інтеграція механізмів динамічної реконфігурації та підтримка зовнішніх агентів, розгорнутих на окремих віртуальних серверах, робить LLMAgentNet гнучкою та масштабованою платформою. Окремо охарактеризовано систему пам'яті агентів, реалізовану через векторну базу даних, що дає змогу зберігати знання, формувати змінні під час виконання завдань і використовувати їх як контекст у наступних кроках. LLMAgentNet підтримує кілька режимів роботи: Human-in-the-Loop, Human-on-the-Loop і Human-out-of-the-Loop, що особливо важливо на етапах розроблення та налагодження системи. Проведено як формальні тести (наприклад, HotPotQA), так і практичне застосування системи у сфері автоматизації контент-маркетингу, де було створено понад 400 статей без участі людини. Отримані результати показали зниження рівня помилок до 3 % після увімкнення модуля рефлексії та зростання продуктивності в понад 20 разів порівняно з ручним створенням контенту із використанням ChatGPT. Унаслідок цього доведено ефективність LLMAgentNet як системи для реалізації складних задач із перспективою застосування у майбутніх автономних інтелектуальних системах та поступу в напрямі AGI (англ. Artificial General Intelligence)

    Ерозійна здатність опадів як кліматичний чинник прояву водної ерозії ґрунтового покриву у паркових і лісопаркових насадженнях Львова

    No full text
    The general approaches to modeling soil cover water erosion in soil science and hydrology using numerous equations, particularly RUSLE, have been analyzed. These approaches are based on the analysis of climatic conditions (erosive potential of precipitation), soil erodibility, terrain relief, vegetation cover, and reclamation measures. It is noted that the rainfall erosivity coefficient (R-factor) is a function of the kinetic energy and intensity of precipitation. The results of studies on rainfall erosivity based on pluviograms are presented using the P. Stanescu formula, which is based on the data about the maximum 15-minute rainfall intensity. It has been established that linear, power, or exponential mathematical equations are widely used to determine the erosive potential of precipitation, using monthly and annual precipitation amounts as the argument. Based on meteorological data from 1990 to 2024, more than 50 formulas have been applied to assess the erosive potential of precipitation in Lviv. It has been established that most mathematical expressions are unsuitable for the conditions in Lviv, as they were developed based on significantly different climatic parameters. The study found that Lviv receives an average annual precipitation of 760 mm, with the majority occurring between May and September. The minimum annual precipitation of 582 mm was recorded in the dry year of 1995 when only 10 mm of rainfall fell in July. More than 900 mm of precipitation was recorded in 1998, 2001, and 2010. A formula was selected to determine the erosive potential of precipitation in Lviv based on the spatial distribution of this indicator across Poland and the EU. The Marcinkowski formula, a development of which was based on Poland's climatic parameters, was applied. It has been established that the average rainfall erosivity in Lviv is 715 MJ×mm×ha–1×h–1×year–1, with a standard deviation of 101 MJ×mm×ha–1×h–1×year–1. The minimum rainfall erosivity value of 537 MJ×mm×ha-1×h-1×year-1 was observed in the dry year of 1995, while the maximum value of 949 MJ×mm×ha–1×h–1×year–1 was recorded in 2001. Additionally, five approximating functions have been proposed for calculating the erosive potential of precipitation in Lviv to enable a comparative assessment of the parameters of linear and power functions. It has been revealed that functions based on the Modified Fournier Index (MFI) exhibit lower approximation accuracy.Проаналізовано загальні підходи до моделювання водної ерозії ґрунтового покриву у ґрунтознавстві та гідрології із використанням багаточисельних рівнянь, зокрема RUSLE (англ. Revised Universal Soil Loss Equation), які базуються на аналізі кліматичних умов (ерозійної здатності опадів), ерозійної піддатливості ґрунту, рельєфу місцевості, рослинного покриву і меліоративних заходів. Відзначено, що коефіцієнт ерозійності опадів (R-фактор) є функцією кінетичної енергії та інтенсивності опадів. Наведено результати досліджень ерозійності опадів на підставі плювіограм за формулою Станеску, яка базується на інформації про максимальну 15-хвилинну інтенсивність дощів. З'ясовано, що для визначення ерозійної здатності опадів широко використовують лінійні, степеневі або експоненціальні математичні рівняння, де як аргумент є місячні та річні суми опадів. Застосовано понад 50 формул для визначення ерозійної здатності опадів в умовах Львова на підставі метеорологічних даних за 1990-2024 роки. Встановлено, що більшість математичних виразів не підходять для умов Львова, оскільки істотно відрізняються кліматичними параметрами, на підставі яких їх було розроблено. Досліджено, що у Львові в середньому випадає 760 мм опадів за рік, більша частина яких припадає на період з травня по вересень; мінімальна річна кількість опадів (582 мм) була в посушливий 1995 рік, коли в липні випало всього 10 мм опадів; понад 900 мм опадів було зафіксовано в 1998, 2001 та 2010 роках. Виконано підбір формули для визначення ерозійної здатності опадів в умовах Львова на підставі просторового розподілу значень цього показника на території Польщі та ЄС. Застосовано формулу Марцинковського, яку розроблено на підставі кліматичних параметрів Польщі. Встановлено, що середнє значення ерозійної здатності опадів в умовах Львова становить 715 МДж×мм×га–1×год–1×рік–1, а середнє квадратичне відхилення – 101 МДж×мм×га–1×год–1×рік–1; мінімальне значення ерозійності опадів – 537 МДж×мм×га−1×год−1×рік−1 – зафіксовано у посушливому 1995 р., а максимальне – 949 МДж×мм×га−1×год−1×рік−1 – у 2001 році. Запропоновано додатково п'ять апроксимуючих функцій для обчислення ерозійної здатності опадів в умовах Львова з метою порівняльної оцінки параметрів лінійних і степеневих функцій. Встановлено, що функції на підставі модифікованого індексу Фурньє MFI характеризуються меншою точністю апроксимації

    Застосовність наявних методів ідентифікації полів напружень у пиломатеріалах для автоматизованих систем керування процесом сушіння деревини

    No full text
    Despite the significant development of computing power, the availability of a significant number of theoretical developments and the results of numerical experiments, the practical determination of the stress state of wood during drying still remains a difficult technical task. In the course of research, it has been found that in a significant number of published scientific studies, the authors try to relate the moisture distribution in dried lumber to the distribution of stresses and strains using known techniques and tools. It has been established that most modern drying process control systems use only the parameters of humidity and temperature of wood and the environment as input signals without taking into account information about the current distribution of stresses occurring in the cross-section of dried lumber. It has been shown that assessing the quality of the drying process by the final result does not allow us to determine whether all stages of the drying regime satisfy the requirement of preserving the integrity of wood. Accordingly, as a result of making incorrect decisions regarding the intensity of moisture removal, its duration increases and overall energy consumption increases as well. The need to supplement the existing automatic control systems with additional information on the development of stresses in wood during drying is proved, which can not only significantly improve the quality and economic indicators, but also radically change the strategy of the process itself. The applicability of the available means of identifying stress fields in dried lumber is analyzed and the main criteria for their comparison in terms of practical use are formulated. The absence of direct methods for measuring the distribution of stresses arising in the process of wood drying was revealed. The limitations of the available technical means and mathematical models for use in automation systems for the wood drying process are determined. The need to develop a direct method for assessing the stress-strain state of wood has been established. The expediency of developing a mathematical model of the regularities of the development of stress fields in dried lumber to improve existing dryer control systems is substantiated.Незважаючи на значний розвиток потужності обчислювальних засобів, наявності великої кількості теоретичних розробок та результатів числових експериментів, практичне визначення напруженого стану деревини у процесі сушіння досі залишається складним технічним завданням. З'ясовано, що у численних опублікованих наукових дослідженнях автори намагаються пов'язати розподіл вологості у висушуваних пиломатеріалах із розподілом напружень та деформацій, використовуючи відомі технічні прийоми та засоби. Встановлено, що більшість сучасних систем керування процесом сушіння використовують як вхідні сигнали тільки параметри вологості та температури деревини та навколишнього середовища без урахування інформації про поточний розподіл напружень, що виникають у перерізі висушуваних пиломатеріалів. Досліджено, що оцінювання якості процесу сушіння за остаточним результатом не дає змоги встановити, чи всі стадії режиму сушіння задовольняють вимогу збереження цілісності деревини. Відповідно, внаслідок прийняття хибних рішень щодо інтенсивності видалення вологи, зростає її тривалість та підвищуються загальні енерговитрати. Доведено потребу доповнення наявних систем автоматичного керування додатковою інформацією про розвиток напружень у деревині під час сушіння, яка може не тільки істотно покращити якісні та економічні показники, але й докорінно змінити стратегію перебігу самого процесу. Проаналізовано застосовність наявних засобів ідентифікації полів напружень у висушуваних пиломатеріалах та сформульовано основні критерії їх порівняння щодо можливості практичного використання. Виявлено відсутність прямих способів вимірювання розподілу напружень, що виникають у процесі сушіння деревини. Визначено обмеження, які мають наявні технічні засоби та математичні моделі щодо застосування у системах автоматизації процесу сушіння деревини. Встановлено потребу розроблення прямого способу оцінювання напружено-деформівного стану деревини. Обґрунтовано доцільність розроблення математичної моделі закономірностей розвитку полів напружень у висушуваних пиломатеріалах для вдосконалення наявних систем керування сушарками

    Аналіз інформаційних потреб користувачів бібліотек закладів вищої освіти на підставі поведінкових даних з вебресурсів

    No full text
    In the library Internet space, the main resources for structuring and providing access to information are library websites. The article reveals the technical and informational potential of the university library website as an important tool for determining the composition of its users and the main ways of their interaction with this web resource, as well as user needs and interests, including the degree of their satisfaction, using the example of ten libraries of technical institutions of higher education in Ukraine. Therefore, the purpose of the study consists in analysing the web traffic of libraries of higher education institutions, which allows determining the information needs of their users. In accordance with the purpose, objectives were formulated. To solve them, general scientific and special research methods were used in accordance with the stages of meeting the objectives. In particular, the methods of technological analysis, descriptive-analytical and prognostic-analytical methods were used to study existing and promising information technologies that affect the development of librarianship and the directions of information technology development in the system of meeting the information needs of users of technical university libraries. We analysed the technical condition and quality of library websites of technical institutions of higher education, the features of their construction such as structure, headings and functioning. In the course of research, we emphasized that a significant part of them falls into the "good quality" range, but none received the "excellent quality" indicator. Moreover, the structure of a typical library website of a technical institution of higher education in Ukraine was analyzed and an expert assessment of their visual and logical state was made, which enabled determining the rating of resources by ease of use. Important criteria for conducting such an analysis are as follows: page design, interface clarity, multilingualism, the presence of inclusive elements, content quality, and information relevance. The nature of user interaction with web resources of university libraries of Ukraine was analyzed, in particular, the following elements with which users can interact on the site were named: the institution logo, the main menu, navigation buttons, electronic resources, etc. Certain trends in the use of various site elements were tracked as well. The main menu buttons, which lead to the main catalogue and electronic resources, have the greatest interaction activity. A popular element is changing the site language to English. The users of university library websites are characterized by various indicators. The user audience groups of selected information resources are identified. The demographic, gender and socio-economic structure of the user audience, as well as the structure of users by age, are presented. From the above data it is clear that the main users of library websites of technical institutions of higher education in Ukraine are women aged ranging from 18-24 to 35-44, which is explained by the specifics of the functioning of the institutions themselves. The analysis of the resource usage indicators of the studied institutions was conducted. Thus, we have concluded that the study of web resource traffic of libraries of technical higher education institutions of Ukraine provides an opportunity to gain a deep understanding of user behaviour, their needs and preferences, which will help increase user interest in libraries and their resources and, thus, satisfy their user needs.Проаналізовано технічний та інформаційний потенціали вебсайту бібліотеки університету як важливого інструменту для визначення складу його користувачів і основних шляхів їх взаємодії з цим вебресурсом (на прикладі десяти бібліотек технічних закладів вищої освіти України). Здійснено аналіз якості бібліотечних сайтів технічних ЗВО, особливостей їх структури, рубрик та функціонування. Підкреслено, що значна частина їх входить у діапазон "хороша якість", проте жоден не отримав показника "відмінна якість". Проаналізовано структуру типового сайту бібліотеки технічного закладу вищої освіти України та зроблено експертне оцінювання їх візуального та логічного стану, що дало можливість визначити рейтинг ресурсів за зручністю користування. Наведено важливі критерії для проведення такого аналізу: дизайн сторінки, зрозумілість інтерфейсу, багатомовність, наявність інклюзивних елементів, якість контенту, актуальність інформації. Проаналізовано характер взаємодії користувачів з вебресурсами університетських бібліотек України, зокрема, названо елементи, з якими користувачі можуть взаємодіяти на сайті: логотип установи, головне меню, кнопки навігації, електронні ресурси тощо. Відстежено певні тенденції у використанні різних елементів сайту. Найбільшу активність взаємодії мають кнопки головного меню, які ведуть до головного каталогу та електронних ресурсів. Популярним елементом є зміна мови сайту на англійську. Охарактеризовано користувачів сайтів університетських бібліотек за різними показниками. Виокремлено групи користувацької аудиторії вибраних інформаційних ресурсів. Подано демографічну, гендерну та соціоекономічну структуру користувацької аудиторії, а також структуру користувачів за віком. З наведених вище даних видно, що основними користувачами бібліотечних сайтів технічних закладів вищої освіти в Україні є жінки віком 18-24 та 35-44 років, що пояснюють специфікою функціонування самих закладів. Проаналізовано показники використання ресурсів досліджуваних установ. Зроблено висновки, що отримані дані мають цінну інформацію про поведінку користувачів і слугують основою для вдосконалення сайтів бібліотек

    1,612

    full texts

    2,661

    metadata records
    Updated in last 30 days.
    Scientific Bulletin of UNFU (Ukrainian National Forestry University)
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇