Qucosa – Hemholtz-Zentrum Dresden-Rossendorf
Not a member yet
801 research outputs found
Sort by
Gammadensitometrische Gasgehaltsmessungen an einem beheizten Rohrbündel
Get PDFIm Rahmen eines vom Bundesministerium für Bildung und Forschung geförderten Projektes (Förderkennzeichen 02NUK010A) wurden an einem senkrechten, mit Flüssigkeit umströmten und beheizten Stabbündel gammadensitometrische Gasgehaltsmessungen durchgeführt. Es wurden zwei Messpositionen, zwei Volumenstromraten des umströmenden Fluides, zwei Unterkühlungswerte und elf Wärmestromdichten zur Messung gewählt. Der Bericht umfasst die Beschreibung des Versuchsstandes, die Messmethodik, Ergebnisse und deren Interpretation. Im Detail wird ebenfalls die Messunsicherheit bewertet
Dynamics of the free surface of stratified two-phase flows in channels with rectangular cross-sections
Get PDFStratified two-phase flows were investigated at different test facilities with horizontal test sections in order to provide an experimental database for the development and validation of computational fluid dynamics (CFD) codes. These channels were designed with rectangular cross-sections to enable optimal observation conditions for the application of optical measurement techniques. Consequently, the local flow structure was visualised with a high-speed video camera, delivering data with high-resolution in space and time as needed for CFD code validation.
Generic investigations were performed at atmospheric pressure and room temperature in two air/water channels made of acrylic glass. Divers preliminary experiments were conducted with various measuring systems in a test section mounted between two separators. The second test facility, the Horizontal Air/Water Channel (HAWAC), is dedicated to co-current flow investigations. The hydraulic jump as the quasi-stationary discontinuous transition between super- and subcritical flow was studied in this closed channel. Moreover, the instable wave growth leading to slug flow was investigated from the test section inlet. For quantitative analysis of the optical measurements, an algorithm was developed to recognise the stratified interface in the camera frames, allowing statistical treatments for comparison with CFD calculation results.
The third test apparatus was installed in the pressure chamber of the TOPFLOW test facility in order to be operated at reactor typical conditions under pressure equilibrium with the vessel atmosphere. The test section representing a flat model of the hot leg of the German Konvoi pressurised water reactor (PWR) scaled at 1:3 is equipped with large glass side walls in the region of the elbow and of the steam generator inlet chamber to allow visual observations. The experiments were conducted with air and water at room temperature and maximum pressures of 3 bar as well as with steam and water at boundary conditions of up to 50 bar and 264°C. Four types of experiments were performed, including generic test cases as well as transient validation cases of typical nuclear reactor safety issues. As an example, the co-current flow experiments simulate the two-phase natural circulation in the primary circuit of a PWR. The probability distribution of the water level measured in the reactor pressure vessel simulator was used to characterise the flow in the hot leg. Moreover, the flooding behaviour in this conduit was investigated with dedicated counter-current flow limitation experiments. A comparison of the flooding characteristics with similar experimental data and correlations available in the literature shows that the channel height is the characteristic length to be used in the Wallis parameter for channels with rectangular cross-sections. Furthermore, for the analysis of steam/water experiments, condensation effects had to be taken into account. Finally, the experimental results confirm that the Wallis similarity is appropriate to scale flooding in the hot leg of a PWR over a large range of pressure and temperature conditions.
Not least, different examples of comparison between experiment and simulation demonstrate the possibilities offered by the data to support the development and validation of CFD codes. Besides the comparison of qualitative aspects, it is shown exemplarily how to treat the CFD results in order to enable quantitative comparisons with the experiments
Modelling and analysis of severe accidents for VVER-1000 reactors
Get PDFAccident conditions involving significant core degradation are termed severe accidents /IAEA:
NS-G-2.15/. Despite the low probability of occurrence of such events, the investigation of severe accident scenarios is an important part of the nuclear safety research. Considering a hypothetical core melt down scenario in a VVER-1000 light water reactor, the early in-vessel phase focusing on the thermal-hydraulic phenomena, and the late in-vessel phase focusing on the melt relocation into the reactor pressure vessel (RPV) lower head, are investigated.
The objective of this work is the assessment of severe accident management procedures for VVER-1000 reactors, i.e. the estimation of the maximum period of time available for taking appropriate measures and particular decisions by the plant personnel. During high pressure severe accident sequences it is of prime importance to depressurize the primary circuit in order to allow for effective injection from the emergency core cooling systems and to avoid reactor pressure vessel failure at high pressure that could cause direct containment heating and subsequent challenge to the containment structure. Therefore different accident management measures were investigated for the in-vessel phase of a hypothetical station blackout accident using the severe accident code ASTEC, the mechanistic code ATHLET and the multi-purpose code system ANSYS.
The analyses performed on the PHEBUS ISP-46 experiment, as well as simulations of small break loss of coolant accident and station blackout scenarios were used to contribute to the validation and improvement of the integral severe accident code ASTEC. Investigations on the applicability and the effectiveness of accident management procedures in the preventive domain, as well as detailed analyses on the thermal-hydraulic phenomena during the early in-vessel phase of a station blackout accident have been performed with the mechanistic code ATHLET. The results of the simulations show, that the effectiveness of the procedures strongly depends on the ability of the passive safety systems to inject as much water as possible into the reactor coolant system.
The results on the early in-vessel phase have shown potentially delayed RPV failure by depressurization of the primary side, as slowing the core damage gives more time and different possibilities for operator interventions to recover systems and to mitigate or terminate the accident. The ANSYS model for the description of the molten pool behaviour in the RPV lower plenum has been extended by a model considering a stratified molten pool configuration. Two different pool configurations were analysed: homogeneous and segregated. The possible failure modes of the RPV and the time to failure were investigated to assess the possible loadings on the containment. The main treated issues are: the temperature field within the corium pool and the RPV and the structure-mechanical behaviour of the vessel wall.
The results of the ASTEC calculations of the melt pool configuration were applied as initial conditions for the ANSYS simulations, allowing a more detailed and more accurate modelling of the thermal and mechanical behaviour of the core melt and the RPV wall.
Moreover, for the late in-vessel phase, retention of the corium in the RPV was investigated presuming external cooling of the vessel wall as mitigative severe accident management measure. The study was based on the finite element computer code ANSYS. The highest thermomechanical loads are observed in the transition zone between the elliptical and the vertical vessel wall for homogeneous pool and in the vertical part of the vessel wall, which is in contact with the molten metal in case of sub-oxidized pool. Assuming external flooding will retain the corium within the RPV. Without flooding, the vessel wall will fail, as the necessary temperature for a balanced heat release from the external surface via radiation is near to or above the melting point of the steel
discovered: THE HZDR RESEARCH MAGAZINE
Get PDF\"Discovered\" is the English-language edition of our research magazine; it is published once a year. The magazine\'s German-language edition \"entdeckt\" is published biannually.
Each new issue of this easy-to-read magazine has a major focus, be it magnetic fields and forces, nuclear safety research, the DRESDEN-concept research alliance or cancer research. The magazine keeps you informed about research at the HZDR, new staff members or work groups as well as interesting events
International Workshop on Advanced Techniques in Actinide Spectroscopy (ATAS 2012) - Abstract Book
Get PDFModern Societies have to consider diverse tasks strongly related to geochemistry sciences. Examples intensively discussed in the public are restoration measures for contaminated industrial fallow grounds, the safe storage of chemical-toxic and radioactive waste, carbon dioxide sequestration to reduce green-house gas emissions, the construction and operation of deep geothermal power plants, the geochemical exploration of natural resources or water and waste water treatments, including desalination efforts. Direct and urgent aspects to be dealt with are analytical and geochemical consequences of the Fukushima Daiichi nuclear disaster. All these cases have one in common – they require reliable thermodynamic data in order to forecast the fate of chemicals in the respective environment.
Whereas a variety of standard methods, such as potentiometry, solubility studies, liquid-liquid extraction or electrochemical titrations, are in widespread use to generate thermodynamic data, it is far less straightforward to assign correct reaction pathways and structural patterns to the underlying chemical transformations. This especially holds for systems with strong tendencies to complexation and oligomerization. Here, it is essential to have proof of evidence for all involved species, which cannot be provided by the aforementioned methods, and is still lacking for various metal-containing systems.
Spectroscopic techniques in combination with approaches from quantum chemistry can be of great benefit for such tasks. However, their application ranges are often restricted with respect to the type of element (and redox state) that can be probed. Further handicaps are imposed by detection limits or other parameters such as pH or salinity. Moreover, the spectroscopic results are often difficult to interpret in an unambiguous way.
To overcome these complications at least partially, this workshop has been initiated. It shall significantly extend the application areas of spectroscopic tools important for lanthanide and actinide chemistry. Emphasis shall be placed on the development of spectroscopic methods towards more challenging environmental conditions – such as very basic pH values, elevated temperatures, pressures, or salinities – extending the range of covered elements and redox states. Furthermore, the exploration of options for lowering detection limits and increasing spatial resolution at sufficiently high signal-to-noise ratios will support future investigations on more complex systems. An approach combining the extension of spectroscopic tools with respect to elements and parameters, improvements of experimental setups, and applications of quantum chemical methods in predictive as well as interpretative ways certainly can be very beneficial.
The workshop hopefully will bundle and strengthen respective research activities and ideally act as a nucleus for an international network, closely collaborating with international partners. I am confident that the workshop will deliver many exciting ideas, promote scientific discussions, stimulate new developments and in such a way be successful
Entwicklung einer Version des Reaktordynamikcodes DYN3D für Hochtemperaturreaktoren: Abschlussbericht
Get PDFBasierend auf dem Reaktordynamikcode DYN3D für LWR, wurde die Codeversion DYN3D-HTR für das Blockkonzept eines graphit-moderierten, helium-gekühlten Hochtemperaturreaktors entwickelt. Diese Entwicklung umfasst die:
• methodische Weiterentwicklung der 3D stationären Neutronenflussberechnung für hexagonale Geometrie (HTR-Brennelement-Blöcke),
• Generierung von Wirkungsquerschnittsdaten unter Berücksichtigung der doppelten Heterogenität,
• Modellierung der Wärmeleitung und des Wärmetransports in der Graphitmatrix.
Die nodale SP3-Neutronentransport-Methode in DYN3D wurde auf hexagonale Brennelementgeometrie erweitert. Es wird eine Unterteilung der Hexagone in Dreiecke vorgenommen, so dass die Verfeinerung hexagonaler Strukturen untersucht werden kann. Die Verifikation erfolgte durch Vergleiche mit Monte-Carlo-Referenzlösungen. Für die Behandlung der doppelten Heterogenität der Brennelementstruktur bei Homogenisierung der Wirkungsquerschnitte wurden neue Methoden entwickelt. Zum einen wurde ein zweistufiges Homogenisierungsverfahren basierend auf der Methode der sog. Reactivity Equivalent Transformation (RPT) weiterentwickelt. Zum anderen ermöglichte die Verfügbarkeit des neuen Monte-Carlo-Codes SERPENT die Anwendung eines einstufigen Verfahrens, wobei die 3D heterogenen Strukturen in einem Rechenschritt konsistent erfasst werden können. Weiterhin wur-de in DYN3D ein 3D Wärmeleitungsmodell implementiert, das den radialen und axialen Wärmetransport in der Graphitmatrix beschreiben kann. DYN3D-HTR wurde schließlich anhand der Testfälle für Reaktivitätstransienten erprobt. Die Verifikation erfolgte durch Vergleich zwischen 3D und 1D Berechnung der Wärmeleitung. Schließlich wurde DYN3D mit dem CFD-Code ANSYS-CFX gekoppelt, um auch dreidimensionale Strömungen in Reaktorkernen berechnen zu können. Der Kern wird als poröser Körper modelliert. Die Kopplung wurde an anhand von 2 Testbeispielen, dem Auswurf eines Steuerstabes und einer lokalen Strömungsblockade in einem Brennelement, erprobt
Precise nuclear physics for the sun
Get PDFFor many centuries, the study of the Sun has been an important testbed for understanding stars that are further away. One of the first astronomical observations Galileo Galilei made in 1612 with the newly invented telescope concerned the sunspots, and in 1814, Joseph von Fraunhofer employed his new spectroscope to discover the absorption lines in the solar spectrum that are now named after him.
Even though more refined and new modes of observation are now available than in the days of Galileo and Fraunhofer, the study of the Sun is still high on the agenda of contemporary science, due to three guiding interests.
The first is connected to the ages-old human striving to understand the structure of the larger world surrounding us. Modern telescopes, some of them even based outside the Earth’s atmosphere in space, have succeeded in observing astronomical objects that are billions of lightyears away. However, for practical reasons precision data that are important for understanding stars can still only be gained from the Sun. In a sense, the observations of far-away astronomical objects thus call for a more precise study of the closeby, of the Sun, for their interpretation.
The second interest stems from the human desire to understand the essence of the world, in particular the elementary particles of which it consists. Large accelerators have been constructed to produce and collide these particles. However, man-made machines can never be as luminous as the Sun when it comes to producing particles. Solar neutrinos have thus served not only as an astronomical tool to understand the Sun’s inner workings, but their behavior on the way from the Sun to the Earth is also being studied with the aim to understand their nature and interactions.
The third interest is strictly connected to life on Earth. A multitude of research has shown that even relatively slight changes in the Earth’s climate may strongly affect the living conditions in a number of densely populated areas, mainly near the ocean shore and in arid regions. Thus, great effort is expended on the study of greenhouse gases in the Earth’s atmosphere. Also the Sun, via the solar irradiance and via the effects of the so-called solar wind of magnetic particles on the Earth’s atmosphere, may affect the climate. There is no proof linking solar effects to short-term changes in the Earth’s climate. However, such effects cannot be excluded, either, making it necessary to study the Sun.
The experiments summarized in the present work contribute to the present-day study of our Sun by repeating, in the laboratory, some of the nuclear processes that take place in the core of the Sun. They aim to improve the precision of the nuclear cross section data that lay the foundation of the model of the nuclear reactions generating energy and producing neutrinos in the Sun.
In order to reach this goal, low-energy nuclear physics experiments are performed. Wherever possible, the data are taken in a low-background, underground environment. There is only one underground accelerator facility in the world, the Laboratory Underground for Nuclear Astrophysics (LUNA) 0.4MV accelerator in the Gran Sasso laboratory in Italy. Much of the research described here is based on experiments at LUNA. Background and feasibility studies shown here lay the base for future, higher-energy underground accelerators. Finally, it is shown that such a device can even be placed in a shallow-underground facility such as the Dresden Felsenkeller without great loss of sensitivity
Modeling of metal nanocluster growth on patterned substrates and surface pattern formation under ion bombardment
Get PDFThis thesis addresses the metal nanocluster growth process on prepatterned substrates, the development of atomistic simulation method with respect to an acceleration of the atomistic transition states, and the continuum model of the ion-beam inducing semiconductor surface pattern formation mechanism.
Experimentally, highly ordered Ag nanocluster structures have been grown on pre-patterned amorphous SiO^2 surfaces by oblique angle physical vapor deposition at room temperature. Despite the small undulation of the rippled surface, the stripe-like Ag nanoclusters are very pronounced, reproducible and well-separated. The first topic is the investigation of this growth process with a continuum theoretical approach to the surface gas condensation as well as an atomistic cluster growth model. The atomistic simulation model is a lattice-based kinetic Monte-Carlo (KMC) method using a combination of a simplified inter-atomic potential and experimental transition barriers taken from the literature.
An effective transition event classification method is introduced which allows a boost factor of several thousand compared to a traditional KMC approach, thus allowing experimental time scales to be modeled. The simulation predicts a low sticking probability for the arriving atoms, millisecond order lifetimes for single Ag monomers and ≈1 nm square surface migration ranges of Ag monomers. The simulations give excellent reproduction of the experimentally observed nanocluster growth patterns.
The second topic specifies the acceleration scheme utilized in the metallic cluster growth model. Concerning the atomistic movements, a classical harmonic transition state theory is considered and applied in discrete lattice cells with hierarchical transition levels. The model results in an effective reduction of KMC simulation steps by utilizing a classification scheme of transition levels for thermally activated atomistic diffusion processes. Thermally activated atomistic movements are considered as local transition events constrained in potential energy wells over certain local time periods. These processes are represented by Markov chains of multi-dimensional Boolean valued functions in three dimensional lattice space. The events inhibited by the barriers under a certain level are regarded as thermal fluctuations of the canonical ensemble and accepted freely. Consequently, the fluctuating system evolution process is implemented as a Markov chain of equivalence class objects. It is shown that the process can be characterized by the acceptance of metastable local transitions. The method is applied to a problem of Au and Ag cluster growth on a rippled surface. The simulation predicts the existence of a morphology dependent transition time limit from a local metastable to stable state for subsequent cluster growth by accretion.
The third topic is the formation of ripple structures on ion bombarded semiconductor surfaces treated in the first topic as the prepatterned substrate of the metallic deposition. This intriguing phenomenon has been known since the 1960\'s and various theoretical approaches have been explored. These previous models are discussed and a new non-linear model is formulated, based on the local atomic flow and associated density change in the near surface region. Within this framework ripple structures are shown to form without the necessity to invoke surface diffusion or large sputtering as important mechanisms. The model can also be extended to the case where sputtering is important and it is shown that in this case, certain \\lq magic\' angles can occur at which the ripple patterns are most clearly defined. The results including some analytic solutions of the nonlinear equation of motions are in very good agreement with experimental observation
Quantitative dopant profiling in semiconductors: A new approach to Kelvin probe force microscopy
Get PDFFailure analysis and optimization of semiconducting devices request knowledge of their electrical properties. To meet the demands of today’s semiconductor industry, an electrical nanometrology technique is required which provides quantitative information about the doping profile and which enables scans with a lateral resolution in the sub-10 nm range. In the presented work it is shown that Kelvin probe force microscopy (KPFM) is a very promising electrical nanometrology technique to face this challenge. The technical and physical aspects of KPFM measurements on semiconductors required for the correct interpretation of the detected KPFM bias are discussed. A new KPFM model is developed which enables the quantitative correlation between the probed KPFM bias and the dopant concentration in the investigated semiconducting sample. Quantitative dopant profiling by means of the new KPFM model is demonstrated by the example of differently structured, n- and p-type doped silicon. Additionally, the transport of charge carriers during KPFM measurements, in particular in the presence of intrinsic electric fields due to vertical and horizontal pn junctions as well as due to surface space charge regions, is discussed. Detailed investigations show that transport of charge carriers in the semiconducting sample is a crucial aspect and has to be taken into account when aiming for a quantitative evaluation of the probed KPFM bias