11 research outputs found
Evolution of Durability and Mechanical Behaviour of Mud Mortar Stabilized with Oil Shale Ash, Lime, and Cement
No full textThe investigation into earthen construction technologies and materials is now acknowledged as a crucial area requiring further research. Earthen mortars are prevalent in both modern and traditional construction due to the abundance of earth material, their favorable thermal properties, and their low embodied energy. The objective of this study is to support the use of natural materials collected from north Jordan to enhance the mechanical properties and durability of mud mortar. The local soil was stabilized using Oil Shale Ash (OSA), Ordinary Portland Cement (OPC), and lime for producing mud mortar. Particle size analysis, plastic limit, liquid limit, XRD, and XRF were applied to assess the geotechnical characterization and mineral composition of the earthen stabilizers and local soil. In order to examine the mechanical properties (specifically compressive strength) and durability characteristics (such as water absorption and shrinkage) of mud mortar, a total of 8 mixtures were prepared. One of these mixtures served as a control, while the others were created by substituting soil with varying proportions of OSA, cement, and lime. The results show that the mud mortar contained 10% OSA and 10% cement, which exhibited the highest compressive strength. Moreover, an increase in the proportion of OSA in the soil led to a decrease in absorption and linear shrinkage, indicating that OSA is an effective stabilizing agent for mud mortar. Doi: 10.28991/CEJ-2023-09-09-06 Full Text: PD
Performance of Carbon Fiber Filament Reinforcing Cement Mortar
No full textThis paper aims to study the effect of Carbon Fiber Filament (CFF) with different ratios and lengths on the physical and mechanical properties of cement mortar. An experimental program included 3 cm fixed length of CFF with 0, 0.25, 0.5, 0.75, and 1% different ratios by weight of cement addition were used in cement mortar cubes. Another experimental program of 0.5% CFF ratio with 1, 2, 3, 4, and 5 cm different lengths by weight of cement addition was used in cement mortar prisms. The physical and mechanical properties of cement mortar containing CFF were experimentally investigated at 7 and 28 days of curing. Workability, by means of flow table test, were measured. Density is conducted for cubes and prisms at the age of 28 days. At ages of 7 and 28 days, compressive and flexural strengths were studied. The study showed a reduction in workability with the increase of CFF ratios and lengths by 0.0 to 2.7% and by 0.9 to 5.4% respectively. Moreover, an improvement in density, compressive, and flexural strengths was observed. At ages of 7 and 28 days, the results showed that compressive strength increased by 33 and 31% respectively at 0.5% of CFF ratio while the flexural strength increased by 125 and 327% respectively with CFF length of 5 cm. Doi: 10.28991/cej-2021-03091753 Full Text: PD
A Green Way of Producing High Strength Concrete Utilizing Recycled Concrete
No full textMultiple studies have investigated the influence of recycled aggregates derived from concrete waste on the efficacy of structural concrete manufactured in recent times. By utilizing recycled aggregates obtained from construction and demolition debris, it is possible to safeguard natural aggregate resources, reduce the demand for landfill space, and promote the utilization of sustainable building materials. However, compared to natural aggregate, bonded cement mortar on recycled concrete aggregate exhibits higher porosity, greater water absorption capacity, and lower strength. The mechanical and durability characteristics of freshly poured and hardened concrete made from recycled concrete aggregate are adversely affected as a result. This study presents comprehensive experimental research aimed at examining the residual mechanical properties and resistance to acid attack of normal and high-strength mixes of recycled aggregate concrete (RAC) using the compressible packing model. Recycled aggregate was employed as both coarse and fine aggregate. The recycled concrete samples were prepared in a manner that corresponded to the proportions of both the coarse and fine aggregates. Twelve mixtures were designed and cast, and their performance was evaluated based on various strength parameters (compressive strength, splitting tensile strength, and flexural strength) as well as acid attack resistance properties (porosity and ultrasonic pulse velocity). The findings indicate that recycled concrete aggregate can be utilized in the production of high-strength concrete, with mechanical property values that are significantly acceptable compared to concrete containing natural aggregates. Moreover, the addition of Silica Fume as a cement replacement in concrete plays a crucial role in enhancing sulphate resistance. In terms of concrete product utilization, recycled concrete and its significance in this study played a crucial role in environmental preservation. Doi: 10.28991/CEJ-2023-09-10-08 Full Text: PD
Effect of alkali activated limestone-silica fume blended precursor on performance enhancement of recycled aggregate concrete
No full textThe utilization of Recycled Aggregates (RA) from Construction and Demolition (C&D) waste, has been reported to be an efficient way of dealing with the environmental issues encountered by our planet nowadays. However, due to the poor quality of RA, its incorporation in high – grade civil engineering applications been limited. It is essential that adequate process of treatment methods be incorporated into the production of RA to enhance its properties and optimize its use. This study is carried out to determine the effects of an alkaline NaOH activated by limestone powder (LSP) and silica fume (SF) to improve the properties of various concrete mixes produced with either recycled concrete aggregate (RCA), or recycled cement block aggregate (CBA). Fifteen mixes were designed to examine the effects of different parameters, RA replacement levels, various w/c ratios and different enhancement methods on the properties of recycled aggregate concrete (RAC). The study examined the effects of the proposed enhancement method on the physical characteristics of RCA and CBA. Compressive strength, splitting tensile strength, flexural strength, pull-out, and water absorption of the different concrete mixes were measured to determine the effectiveness of the enhancement method proposed. The enhanced RAC produced by CBA and RCA showed an increased 28-day compressive strength at 0.35 w/c ratio of up to 51 MPa and 44 MPa, respectively, suitable for structural applications. The flexural strength, tensile splitting strength, and bonding strength values at 0.35 w/c ratio of the enhanced RAC produced with treated CBA were 28%, 6%, and 8% higher than that of the RAC produced with treated CBA. Whereas, the flexural strength, tensile strength, and bonding strength of the enhanced RAC produced with treated RCA were 1%, 3%, and 5% higher compared to the RAC produced with treated RCA. The improved mechanical performance of the enhanced RAC produced by CBA or RCA was attributed to the effects of the geopolymer solution treatment in filling and sealing the voids and gaps on the CBA and RCA surface, leading to a better packed structure, reducing the water absorption, and improving the aggregate impact value. The treatment technique proposed can be a powerful tool for promoting the use of RA in the construction industry and expanding its application
Performance Evaluation of Alkaline Activated Geopolymer Binders Using RCA and Industrial By-Products as Cement Alternatives
No full textThis study explores the performance of alkaline-activated geopolymer binders using industrial by-products and recycled concrete fine aggregate (RCFA) as sustainable alternatives to traditional cement. Materials such as granulated blast furnace slag (GBFS), silica fume (SF), red brick powder (RBP), quick lime (QL), and RCA were utilized to develop eco-friendly binders with enhanced mechanical and durability properties. Experimental tests evaluated physical, mechanical, and microstructural characteristics, including setting times, dry density, flexural strength, and compressive strength. Advanced analysis with SEM and EDAX examined aggregate-binder bonding. Results highlighted the critical role of binder composition in determining performance. Balanced mixtures of GBFS, SF, and RBP achieved superior strength, durability, and compact microstructures, while excessive QL increased porosity, reducing effectiveness. Optimal flexural strength (4.24 MPa at 56 days) was observed for the G30/S40-L20 formulation, underscoring the importance of precise proportions. Composition influenced setting times, with SF delaying gelation and high QL content accelerating it. The findings demonstrate the viability of using RCFA and industrial by-products in sustainable construction, offering a pathway to reduce reliance on traditional cement. The study emphasizes optimizing binder formulations for strength and durability while addressing environmental impacts, encouraging further research into long-term performance under diverse conditions. This innovative approach highlights the potential for integrating recycled and industrial by-products into construction practices to achieve eco-friendly solutions and promote sustainable urban development. Doi: 10.28991/CEJ-2025-011-02-018 Full Text: PD
Assessment of Precast Concrete Deterioration in Marine Environments Using Non-Destructive Methods
No full textConcrete structures in marine environments face significant degradation due to reinforcement corrosion caused by chloride ingress and sulfate attack. Poor construction quality, inadequate standards, and suboptimal design can further accelerate deterioration. Non-destructive testing (NDT) has proven valuable for durability assessment, yet its application remains limited due to the complex microstructural characteristics of concrete. This study establishes a comprehensive procedure for evaluating precast concrete degradation in marine environments using multiple characterization techniques. Two precast concrete elements with different cement types, CEM II A-L 42.5R and CEM I 42.5 R/SR, were analyzed through compressive strength tests, open porosity measurements, mercury intrusion porosimetry (MIP), ultrasonic wave transmission, and scanning electron microscopy (SEM). The results indicate that CEM I 42.5 R/SR exhibits superior compressive strength and lower porosity, making it more durable and suitable for load-bearing applications. Higher ultrasonic pulse velocity (UPV) further confirms its resilience. In contrast, CEM II A-L 42.5R shows lower mechanical performance and greater susceptibility to marine-induced degradation. Over time, pore size distribution shifts, potentially compromising mechanical integrity. SEM analysis reveals gypsum and brucite formation in degraded regions, demonstrating microstructural changes due to seawater exposure. A strong negative correlation between porosity and UPV underscores the detrimental effect of increased porosity on material density and structural stability. This study highlights the effectiveness of UPV and porosity analysis as reliable NDT techniques for assessing concrete deterioration. The strong correlation between UPV and porosity trends suggests that UPV serves as an early indicator of durability loss, enabling timely maintenance interventions. These findings provide valuable insights into material selection for enhanced structural performance in marine environments and emphasize the role of NDT in long-term structural health monitoring
Examining mechanical property differences in concrete with natural and synthetic fiber additives
No full textThe rapid growth of Natural Fiber Laminate (NFL) innovation is a direct response to environmental challenges, positioning these materials as superior alternatives to synthetic fiber composites. This paper delved into the outcomes of an extensive experimental study investigating the influence of sisal fiber (SLF), banana fiber (BF), and glass fiber (GF) on the mechanical and microstructural characteristics of concrete. The water absorption curves were established for sisal fiber concrete (SLFC), banana fiber concrete (BFC), and glass fiber concrete (GFC). Furthermore, Scanning Electron Microscope (SEM) observations were conducted to perform microanalysis and failure analysis of the tested specimens. The results revealed significant improvements in the concrete containing fibers compared to its counterpart in fiber-free concrete. For mixtures with a water-to-binder (W/B) ratio of 0.3, the most optimal mix (GF-30-135) showed improvements in compressive strength, flexural strength, and splitting tensile strengths by 4.13%, 8.93%, and 10.10%, respectively. On the other hand, for W/B of 0.4, mix GF-30-135 showed improvements of 5.05%, 8.55%, and 11.60%, respectively. Furthermore, as the fiber content increased, microscopic analyses revealed a weakening of the bond between the fibers and the rest of the matrix, contributing to the deterioration of the mechanical properties
Examining Mechanical Property Differences in Concrete with Natural and Synthetic Fiber Additives
No full textThe rapid growth of Natural Fiber Laminate (NFL) innovation is a direct response to environmental challenges, positioning these materials as superior alternatives to synthetic fiber composites. This paper delved into the outcomes of an extensive experimental study investigating the influence of sisal fiber (SLF), banana fiber (BF), and glass fiber (GF) on the mechanical and microstructural characteristics of concrete. The water absorption curves were established for sisal fiber concrete (SLFC), banana fiber concrete (BFC), and glass fiber concrete (GFC). Furthermore, Scanning Electron Microscope (SEM) observations were conducted to perform microanalysis and failure analysis of the tested specimens. The results revealed significant improvements in the concrete containing fibers compared to its counterpart in fiber-free concrete. For mixtures with a water-to-binder (W/B) ratio of 0.3, the most optimal mix (GF-30-135) showed improvements in compressive strength, flexural strength, and splitting tensile strengths by 4.13%, 8.93%, and 10.10%, respectively. On the other hand, for W/B of 0.4, mix GF-30-135 showed improvements of 5.05%, 8.55%, and 11.60%, respectively. Furthermore, as the fiber content increased, microscopic analyses revealed a weakening of the bond between the fibers and the rest of the matrix, contributing to the deterioration of the mechanical properties
An Investigation of the Capabilities of Resin Tire Carbon Black “N-330” as a Waste Binder in Asphalt Concrete Mixtures
No full textThis study investigates the potential use of tire-derived carbon black “N-330” as a sustainable waste binder in asphalt concrete mixtures, combined with resin as an alternative to the usual binding material in asphalt mixtures, “bitumen”. With the increasing demand for environmentally friendly construction materials, this research aims to assess the feasibility of incorporating resin tire carbon black N-330 “RTCB N-330” into asphalt as a full replacement for conventional binders. A comprehensive experimental program has been designed to evaluate the mechanical and performance properties of asphalt mixtures containing varying proportions of RTCB N-330, ranging from 2% to 10% by weight of the binder. The impact of replacing bitumen with resin that contains TCB N-330 on the physical, rheological, and thermal characteristics of RTCB N-330 as a modified asphalt binder is assessed in this study. To assess the binders, a number of tests were carried out, including standard tests for ductility, the softening point, and penetration. DTG (Derivative Thermogravimetric Analysis) and testing the thermal susceptibility index were performed. A higher percentage of TCB N-330 reduced the penetration while increasing both the softening point and ductility. Resin with 8% of TCB N-330 was the optimum percentage, which was compared with bitumen as a new environmentally friendly binder. The testing program involved the preparation of asphalt concrete specimens using a Marshall mix design, followed by a Marshall Stability test to evaluate the deformation resistance of the modified mixtures. The results were anticipated to demonstrate that incorporating N-330 into asphalt mixtures can enhance stability. The Marshall test results indicated that samples with 6% resin tire carbon black as the binder percentage “AC-RTCB6” demonstrated the highest stability among all RTCB samples. Moreover, these samples outperformed asphalt mixtures using bitumen as the binder in terms of stability. Also, the AC-B mixes exhibited lower flow values compared to the AC-RTCB mixes. The higher flow observed in the AC-RTCB specimens suggests that the addition of 1.5% xylene as a solvent to the resin was effective and positively influenced the flow characteristics
