5,450 research outputs found

    Minimally invasive orthopedic surgery: First results in navigated total hip arthroplasty

    No full text
    Minimally invasive hip approaches decrease soft tissue damage but reduce the view of the operating field. The combination of minimally invasive approaches with navigation techniques can resolve this conflict. A modified anterolateral approach was used for minimally invasive implantation of hip, endoprostheses, in combination with a navigation technique. A newly developed femoral clamp was used in the study, which allowed a secure fixation of the navigation reference frame without compromising the visibility of the small incision. The results included short skin incisions and hip joint muscle preservation, with only a moderate increase in operating times

    Minimally invasive orthopedic surgery: First results in navigated total hip arthroplasty

    No full text
    Minimally invasive hip approaches decrease soft tissue damage but reduce the view of the operating field. The combination of minimally invasive approaches with navigation techniques can resolve this conflict. A modified anterolateral approach was used for minimally invasive implantation of hip, endoprostheses, in combination with a navigation technique. A newly developed femoral clamp was used in the study, which allowed a secure fixation of the navigation reference frame without compromising the visibility of the small incision. The results included short skin incisions and hip joint muscle preservation, with only a moderate increase in operating times

    Revision arthroplasty of the hip

    No full text
    Modular parts in femoral components used for hip arthroplasty are reported to be predilection sites for mechanical failure. The possible benefit of their use is therefore controversial. We report the outcome of 97 revision hip arthroplasties using a non-cemented femoral component with a modular metaphyseal part and an interchangeable neck (ProfemurA (R)). The femoral defects treated included Paprosky types I-III. The average follow-up was 5 years (range 3-10 years). No mechanical failure of the modular parts and taper connections has been observed so far. The percentage of patients with a balanced leg length increased from 32% preoperative to 65% postoperative. The mean leg length discrepancy could be reduced from 1.4 cm preoperative to 0.5 cm postoperative. A total of 5 re-revisions were required, including 2 cases of infection. The cumulative survival of the implants due to aseptic loosening was 96.5%. Because of the achieved results the use of the modular stem investigated in this study can be classified as safe and effective for revision hip arthroplasty. The interchangeable neck proved to be a useful completion of the revision system

    Closed reduction and percutaneus Kirschner wire fixation for the treatment of dislocated calcaneal fractures: surgical technique, complications, clinical and radiological results after 2–10 years

    No full text
    Introduction To reduce complications, a minimally invasive technique for the treatment of dislocated intraarticular fractures of the calcaneus was used. Therefore previously described closed reduction and internal fixation techniques were combined and modified. Materials and methods Sixty-seven out of 92 calcaneal fractures could be retrospectively evaluated with an average follow-up time of 5.7 years (minimum 2-10 years follow-up). For radiographic evaluation, plain radiographs and CT scans were obtained. The Zwipp score was used for clinical evaluation. Sanders type II, III and IV fractures were diagnosed. Results Length of surgery averaged 61 min (range 20-175 min). The incidence of subtalar arthritis was correlated to the severity of fracture. Bohler's angle was restored in 70.1% (47 of 67) of the cases. On the last follow-up evaluation the average Zwipp score was 130 points (range 48-186 points). The majority (77.7%) of patients were content with their treatment result. The rate of significant complications was 6.5%. Discussion Compared to open techniques the presented minimally invasive technique showed comparable results with a low rate of serious complications and is a viable alternative for the treatment of intraarticular, dislocated calcaneal fractures

    Accuracy of Femoral Tunnel Placement in Medial Patellofemoral Ligament Reconstruction: The Effect of a Nearly True-Lateral Fluoroscopic View

    No full text
    Background: Reconstruction of the medial patellofemoral ligament (MPFL) is an established operative procedure for patients with recurrent episodes of lateral patellar instability. However, recent articles have reported remarkable complication rates, with nonanatomic femoral tunnel positioning in up to 64% of patients. Purpose: To evaluate the sensitivity of femoral tunnel placement using lateral fluoroscopic guidance to minor degrees of deviation from the true-lateral view using established radiographic landmarks. Study Design: Controlled laboratory study. Methods: Six human cadaveric femora were used for this study. A 6-mm radiopaque eyelet was used to mark the native femoral insertion of the MPFL according to previously described radiographic landmarks. Radiographic landmarks were also applied with the femur positioned in 2.5 degrees and 5 degrees of internal and external rotation, respectively, and with the femur in 2.5 degrees and 5 degrees of hip abduction and adduction, respectively. The distance between the center of the 6-mm eyelet to the center of the native femoral MPFL insertion, as established in the true-lateral view, was measured and determined as the degree of shift in each position. Results: Hip adduction, abduction, and internal and external rotations of 2.5 degrees resulted in a shift from the native femoral MPFL insertion point to a more distal (adduction), proximal (abduction), anterior (internal rotation), and posterior location (external rotation) of 2.7 0.7, 2.0 0.7, 2.7 +/- 1.1, and 3.0 +/- 1.3 mm, respectively (all P < .05). Malpositioning increased to a distance of 5.0 +/- 0.7 mm distally, 3.6 +/- 1.0 mm proximally, 5.2 +/- 0.8 mm anteriorly, and 6.2 +/- 0.6 mm posteriorly to the native insertion point when the attachment was marked with 5 degrees of divergence from the true-lateral view (all P < .05). Conclusion: The results of this study indicate the high sensitivity of femoral tunnel placement using lateral fluoroscopic guidance to minor degrees of deviation from the true-lateral view. Clinical Relevance: The study highlights the importance of an exact lateral view when fluoroscopic guidance is used for femoral tunnel positioning in the daily practice of MPFL reconstruction, and a possible explanation for the high incidence of nonanatomic tunnel placement is suggested

    Sensitivity and specificity of plain radiographs for detection of medial-wall perforation secondary to osteolysis

    No full text
    Medial-wall perforation secondary to pelvic osteolysis impacts planning of acetabular revision surgery and may result in pelvic fracture. We compared commonly used radiographic signs for detecting medial-wall perforation (ballooning or discontinuity of Kohler's line or the iliopubic line) to findings from computed tomography (CT) in 27 cementless total hip arthroplasty patients with pelvic osteolysis. Used alone, none of the radiographic signs examined were reliable for detecting medial-wall perforation. When assessed together, however, the development of a discontinuity of Kohler's line, the iliopubic line, or both on anteroposterior pelvic radiographs was a reliable indicator for the presence of medial-wall perforation. Thus, the authors recommend a CT scan to evaluate the integrity of the medial wall when a discontinuity of Kohler's line or the iliopubic line has occurred and a revision surgery is planned

    Early Results and Patient Satisfaction after Total Hip Arthroplasty using a Minimally Invasive Anterolateral Approach

    No full text
    Rehabilitation and patient satisfaction following a modified anterolateral approach for implantation of a total hip replacement (THR) were reviewed following 72 consecutive cases. The Harris Hip and merle d'Aubigné Scores were recorded at 6 and 12 weeks postoperatively. The patient's satisfaction with regard to the surgical result and the need for analgesia for mobilization were recorded. Rehabilitation was assessed by postoperative crutch use. Significant improvements of the Harris Hip and merle d'Aubigné scores were demonstrated. All patients thought their surgical outcome was good or better. 2 patients needed pain medicine on an irregular basis and 4 patients used crutches at 12 weeks. This study demonstrates patient satisfaction and satisfactory rehabilitation following a modified anterolateral approach for minimally-invasive implantation of THR. </jats:p

    Early results and patient satisfaction after total hip arthroplasty using a minimally invasive anterolateral approach

    No full text
    Rehabilitation and patient satisfaction following a modified anterolateral approach for implantation of a total hip replacement (THR) were reviewed following 72 consecutive cases. The Harris Hip and Merle d'Aubigne Scores were recorded at 6 and 12 weeks postoperatively. The patient's satisfaction with regard to the surgical result and the need for analgesia for mobilization were recorded. Rehabilitation was assessed by postoperative crutch use. Significant improvements of the Harris Hip and Merle d'Aubigne scores were demonstrated. All patients thought their surgical outcome was good or better. 2 patients needed pain medicine on an irregular basis and 4 patients used crutches at 12 weeks. This study demonstrates patient satisfaction and satisfactory rehabilitation following a modified antero-lateral approach for minimally-invasive implantation of THR. (Hip International 2009; 19: 367-71

    A New Posterolateral Approach Without Fibula Osteotomy for the Treatment of Tibial Plateau Fractures

    No full text
    The selection of a surgical approach for the treatment of tibia plateau fractures is an important decision. Approximately 7% of all tibia plateau fractures affect the posterolateral corner. Displaced posterolateral tibia plateau fractures require anatomic articular reduction and buttress plate fixation on the posterior aspect. These aims are difficult to reach through a lateral or anterolateral approach. The standard posterolateral approach with fibula osteotomy and release of the posterolateral corner is a traumatic procedure, which includes the risk of fragment denudation. Isolated posterior approaches do not allow sufficient visual control of fracture reduction, especially if the fracture is complex. Therefore, the aim of this work was to present a surgical approach for posterolateral tibial plateau fractures that both protects the soft tissue and allows for good visual control of fracture reduction. The approach involves a lateral arthrotomy for visualizing the joint surface and a posterolateral approach for the fracture reduction and plate fixation, which are both achieved through one posterolateral skin incision. Using this approach, we achieved reduction of the articular surface and stable fixation in six of seven patients at the final follow-up visit. No complications and no loss of reduction were observed. Additionally, the new posterolateral approach permits direct visual exposure and facilitates the application of a buttress plate. Our approach does not require fibular osteotomy, and fragments of the posterolateral corner do not have to be detached from the soft tissue network

    Advancement and separation of apex hole eliminators with cementless duraloc 100 cups - A report of nineteen cases

    No full text
    Background: From 1992 to 1996, we performed 541 cementless total hip arthroplasties using a Duraloc 100 acetabular component with an apex hole eliminator that did not have a positive stop design. During routine follow-up radiographic evaluation, we noted several hips with advanced or separated hole eliminators. This study presents the clinical consequences of this occurrence and its relationship to polyethylene wear and osteolysis. Methods: A total of 541 hips (358 with a minimum duration of follow-up of five years) were evaluated clinically with use of the method of Merle D'Aubigne and Postel. Anteroposterior pelvic and iliac oblique radiographs were used to evaluate polyethylene wear, osteolysis, hole eliminator position, and component stability. Results: Nineteen hips that had been followed for an average of eighty-nine months showed advancement or complete separation of the hole eliminator on radiographic evaluation. In most hips, advancement of the hole eliminator was visible on only the iliac oblique radiograph. In all but one hip with separation of the hole eliminator, complete plug separation was detectable on both the iliac oblique and anteroposterior pelvic radiographs. No association was found between polyethylene wear and either advancement or separation of the hole eliminator. No osteolysis was visible radiographically in the hips with hole eliminator advancement, but osteolysis was always visible in the hips that had complete separation of the hole eliminator. Conclusions: The hole eliminator has been redesigned since November 1995 to prevent possible advancement. However, patients with earlier designs should be followed carefully because advancement or separation can be expected in about 5% of the patients who have been followed for a minimum of five years. Despite this complication, which is seen radiographically, all patients were satisfied with the function of the hip. We do not recommend surgery solely to remove or replace the hole eliminator. Level of Evidence: Therapeutic study, Level IV (case series [no, or historical, control group]). See Instructions to Authors for a complete description of levels of evidence
    corecore