196,109 research outputs found
Synthetic blocks for bone regeneration : A systematic review and meta-analysis
No full textThis systematic review is aimed at evaluating the effectiveness of synthetic block materials for bone augmentation in preclinical in vivo studies. An electronic search was performed on Pubmed, Scopus, EMBASE. Articles selected underwent risk-of-bias assessment. The outcomes were: new bone formation and residual graft with histomorphometry, radiographic bone density, soft tissue parameters, complications. Meta-analysis was performed to compare new bone formation in test (synthetic blocks) vs. control group (autogenous blocks or spontaneous healing). The search yielded 214 articles. After screening, 39 studies were included, all performed on animal models: rabbits (n = 18 studies), dogs (n = 4), rats (n = 7), minipigs (n = 4), goats (n = 4), and sheep (n = 2). The meta-analysis on rabbit studies showed significantly higher new bone formation for synthetic blocks with respect to autogenous blocks both at four-week (mean difference (MD): 5.91%, 95% confidence intervals (CI): 1.04, 10.79%, p = 0.02) and at eight-week healing (MD: 4.44%, 95% CI: 0.71, 8.17%, p = 0.02). Other animal models evidenced a trend for better outcomes with synthetic blocks, though only based on qualitative analysis. Synthetic blocks may represent a viable resource in bone regenerative surgery for achieving new bone formation. Differences in the animal models, the design of included studies, and the bone defects treated should be considered when generalizing the results. Clinical studies are needed to confirm the effectiveness of synthetic blocks in bone augmentation procedures
An In vitro evaluation, on polyurethane foam sheets, of the insertion torque (IT) values, pull-out torque values, and resonance frequency analysis (RFA) of NanoShort dental implants
No full textObjectives: The aim of this study was to investigate, in polyurethane foam sheets, the primary implant stability of a NanoShort implant compared to a self-condenser implant and to a standard, conventional implant. Materials and Methods: Three implant designs were evaluated in the present in vitro investigation: The Test implant (NanoShort), the Control A implant (self-condenser), and the Control B implant (standard design). The study was conducted by comparing the insertion torque values, the pull-out strength values, and the resonance frequency analysis (RFA) values of the Test and Control A and B implants inserted in polyurethane foam models of different thicknesses and densities. The foam densities were 10, 20, and 30 pounds per cubic foot (pcf). Three thicknesses of polyurethane foams (1, 2, 3 mm) were evaluated for a total of 640 experimental sites. Results: The Pearson correlation showed a moderate/strong correlation between all study groups (r > 0.3) for insertion torque and pull-out strength levels. Increased stability of the Test implants was obtained in 3 mm polyurethane sheets. The 2.5 and 3.5 mm Test implants presented good stability in 3 mm polyurethane sheets of 20-30 pcf densities. The Control implants showed better results compared to the Test implants in 1, 2, and 3 mm polyurethane sheets with densities of 10, 20, and 30 pcf. Conclusions: The NanoShort dental implant evaluated in this in vitro study showed a high level of stability in some experimental conditions, and could represent a useful tool, especially in the posterior mandible, as an alternative to vertical augmentation procedures
A 30-year (1988–2018) retrospective microscopical evaluation of dental implants retrieved for different causes : A narrative review
No full textFor decades, the histologic evidence about osseointegration and the bone-implant interface has been discussed in the literature. In this review, the effectiveness of dental implants retrieved for different causes was evaluated. A literature search was performed in databases for papers about implants retrieved from humans published by the Implant Retrieval Center of the University of Chieti-Pescara, Italy. Sixty-eight articles were selected into categories based on topics. The data indicated high level of bone-to-implant contact, lamellar bone close to the surface, roughness related to an increased bone response, organized and remodeled bone after loading, and peri-implant interfaces subjected to a continuous dynamic function
An in vitro analysis on polyurethane foam blocks of the insertion torque (It) values, removal torque values (rtvs), and resonance frequency analysis (rfa) values in tapered and cylindrical implants
No full textBackground: Several different dental implant microgeometries have been investigated in the literature for use in low-density bone sites. The polyurethane solid rigid blocks represent an optimal in vitro study model for dental implants, because their composition is characterized by symmetrical linear chains of monomers of hexa-methylene sequences producing a self-polymerization process. The aim of the present investigation was to evaluate the primary stability of cylindrical and tapered implants positioned into low-density polyurethane solid rigid blocks. Materials and Methods: Two different macrogeometries, cylindrical (4 mm diameter and 10 mm length) and tapered dental implants (4.20 mm diameter and 10 mm length), were investigated in the present study. The implants were inserted into 10 PCF and 20 PCF polyurethane blocks, with and without an additional cortical layer. The insertion torque (IT) values, the removal torque values (RTVs), and the resonance frequency analysis (RFA) values were measured and recorded. Results: A total of 80 sites were tested, and a significant increased primary stability (PS) was detected in favour of tapered dental implants when compared to cylindrical implants in all experimental conditions (p < 0.05). Higher IT, RT, and RFA values were measured in tapered implants in 10 and 20 PCF polyurethane blocks, both with and without the additional cortical layer. Conclusions: Both implants showed sufficient primary stability in poor density substrates, while, on the other hand, the tapered microgeometry showed characteristics that could also lead to clinical application in low-density posterior maxillary sites, even with a drastically decreased bone cortical component
On developing a procedural level generator based on the Model Synthesis algorithm in the context of serious games
No full textIn clinical practice, the use of cognitive training based on video games and gamification strategies is becoming increasingly widespread, especially for populations with neurodevelopmental disorders such as Attention Deficit Hyperactivity Disorder (ADHD), Autism Spectrum Disorder (ASD), or Specific Learning Disorders (SLDs). This paper aims to present Eye-Riders, a serious game for enhancing executive functions, targeting children with specific learning disabilities. In particular, in this paper, we focus on describing the design of a procedural level generator based on the Model Synthesis algorithm that we developed to address cognitive training exploiting in the Eye-Riders game
Short vs. Standard length cone morse connection implants : An in vitro pilot study in low density polyurethane foam
No full textThe aim of the investigation was to evaluate the insertion torque, pull-out torque and implant stability quotient (ISQ) of short implants (SI) and standard length implants (ST) inserted into linearly elastic and constitutive isotropic symmetry polyurethane foam blocks. Short dental titanium implants with a Cone Morse connection and a conical shape (test implants: Test Implant A-diameter 5.5 mm and length 6 mm) (Test Implant B-diameter 5.5 mm and length 5 mm) were used for the present in vitro investigation. ST implants (4 mm diameter and 10 mm length), with a Cone Morse connection and a conical shape, were used as Control Implant A and as Control Implants B. These two latter implants had a different macro design. A total of 20 implants (5 Test A, 5 Test B, 5 Control A and 5 Control B) were used for the present research. The results were similar when comparing the Test A and Test B implants. The test implants had very good stability in polyurethane 14.88-29.76 kgm3 density blocks. The insertion torque values were very high for both types of test implant (25-32 Ncm on 14.88 kgm blocks, and up to 45 Ncm in 29.76 kgm3 blocks). The pull-out test values were very similar to the insertion torque values. The ISQ values were significantly high with 75-80 in 14.88 kgm3 blocks, and 78-83 in 29.76 kgm3 blocks. No differences were found in the values of the Control A and Control B implants. In both these implants, the insertion torque was quite low in the 14.88 kgm3 blocks (16-28 Ncm). Better results were found in the 29.76 kgm3 blocks. The pull-out values for these control implants were slightly lower than the insertion torque values. High ISQ values were found in both control implants (57-80). When comparing SI and ST implants, the SI had a similar if not better performance in low quality polyurethane foam blocks (14.88-29.76 kgm), corresponding to D3 and D4 bone
Osteogenic potential of human dental pulp stem cells co-cultured with equine bone substitute combined with melatonin
No full textBone blocks are proposed in oral bone regeneration for their biocompatibility and osteoconductivity. Human dental pulp stem cells (hDPSCs) have been used with bone substitutes as a biocomplex. Melatonin, produced by the pineal gland, has specific functions in the oral cavity in bone remodeling and enhancing the dual actions on osteoblasts and osteoclasts, the genic expression of bone markers. This study evaluated the osteogenic differentiation of hDPSCs, stimulated by melatonin on equine bone blocks. hDPSCs were cultured in growth medium (GM) or differentiation medium (DM) with or without the presence of equine bone blocks and 100 ?m melatonin. After 7, 14, and 21 days of culture, expression of miRNAs (miR-133a, miR-133b, miR-135a, miR-29b, miR-206, and miR-let-7b) and genes (RUNX2, SMAD5, HDAC4, COL4a2, and COL5a3), osteocalcin levels and histolgic analyses were evaluated. Melatonin and equine blocks increased the osteogenic potential of hDPSCs even in GM, regulated miRNA and gene expression related to osteogenesis, and increased osteocalcin. hDPSCs cultured in DM showed a significantly higher osteogenic potential compared to GM. This study suggests that equine bone blocks and melatonin enhanced osteogenesis, stimulating early stages of cell differentiation. hDPSCs/ equine bone block and melatonin represent a promising, useful biocomplex in bone regeneration with a potential for a possible clinical application
Concentrated Growth Factors vs. Leukocyte-and-Platelet-Rich Fibrin for Enhancing Postextraction Socket Healing. A Longitudinal Comparative Study
No full textPlatelet concentrates (PCs) have been used for over 20 years in dentistry, as an adjunct to oral surgery procedures, to improve hard and soft tissue healing and control postoperative symptoms. Among various PCs, Leukocyte and Platelet-Rich Fibrin (L-PRF) has become very popular due to its excellent cost-effectiveness ratio, and to the simple preparation protocol, but comparative clinical studies with other PCs are lacking. The aim of this split-mouth cohort study was to evaluate the effect of Concentrated Growth Factors (CGF), a recently introduced PC, as compared to L-PRF for enhancing post-extraction socket healing. Methods: Patients in need of bilateral tooth extractions were included. Each side was treated with either CGF or L-PRF. Pain, socket closure and healing index were the main outcomes. Results: Forty-five patients (24 women), aged 60.52 ± 11.75 years (range 37–87 years) were treated. No significant difference in outcomes was found, except for Pain at day 1 (p < 0.001) and socket closure in the vestibulo-palatal/lingual dimension at day 7 post-extraction (p = 0.04), both in favor of CGF. Conclusions: based on the present results, CGF proved to be as effective and safe as L-PRF, representing a valid alternative option for improving alveolar socket healing and reducing postoperative discomfort
In reply to the comment on “Clinical effectiveness of polynucleotides TMJ injections compared to physiotherapy. A 3-month randomised clinical trial”
No full textDental implants with a calcium ions-modified surface and platelet concentrates for the rehabilitation of medically com-promised patients: A retrospective study with 5-year follow-up
No full textBackground: Platelet concentrates are biological, autologous products obtained from the patient’s whole blood, consisting of a supraphysiological concentration of platelets and growth factors, that have proved beneficial in different applications in the medical and dental fields. They are used in several medical and dental applications to enhance tissue healing. Previous evidence shows that platelet concentrates may be beneficial in patients with compromised systemic conditions, in which the healing process is impaired. Aim: To evaluate the 5-year clinical outcome of implant treatment using acid-etched implants with calcium ions-modified surface in association with plasma rich in growth factors, in patients with systemic diseases of a different nature. Methods: Charts of 99 medically compromised patients, who had received a total of 224 dental implants from January 2013 to June 2013, were retrospectively evaluated. Patients were divided into four groups, according to their condition: diabetes (n = 39 patients), osteoporosis (n = 36), lupus erythematosus systemic (n = 5), rheumatoid arthritis (n = 19). The main outcomes were implant survival, marginal bone level (MBL) change and complications throughout follow-up. Results: Mean follow-up was 63.06 ± 1.90 months (range 60.1 to 66.4 months). In total, eight implants failed in 6 diabetic patients and 4 in 3 patients with rheumatoid arthritis. Overall 5-year implant survival was 94.6%. In total, 30 complications occurred in 24 patients, mostly transient, and no severe adverse event occurred. Overall MBL change was 0.45 ± 0.12 mm, with no significant differences among groups. Conclusions: In the present sample of medically compromised patients, rehabilitation with calcium ions-modified surface implants associated with plasma rich in growth factors proved to be a safe and effective treatment. The satisfactory results achieved after 5-year follow-up are comparable to those historically reported for healthy patients
- …
