1,721,025 research outputs found
Nanohole chains for directional and localized surface plasmon excitation
No full textArrangements of subwavelength sized holes in metal films are often used to launch surface plasmon polaritons (SPPs) onto metal-dielectric interfaces. They are readily fabricated and can also be used to generate a variety of near- and far-field intensity patterns. We use a short chain of equally spaced subwavelength sized holes to launch SPPs onto a gold-air interface in complex patterns of hotspots. With a phase-sensitive near-field microscope, we visualize the electric field of the excited SPPs. We observe self-images of the chain that we attribute to the Talbot effect. Far from the chain we observe the SPP diffraction orders. We find that when the spacing of the holes is of the order of the wavelength, the revivals do not occur on the well-known Talbot distance as derived in the paraxial limit. We present an alternative expression for the Talbot distance that does hold for these small spacings. We study the behavior of both the revivals and the diffraction orders as a function of the number of holes. We find that the Talbot revivals become more pronounced as the number of holes is increased, which is in accordance with numerical calculations. We anticipate that our findings are interesting for multiplexing sensor applications, where control over the local intensity of SPPs is crucial
Increase of group delay and nonlinear effects with hole shape in subwavelength hole arrays
No full textWe investigate the influence of hole shape on the group delay of femtosecond laser pulses propagating through arrays of rectangular subwavelength holes in metal films. We find a pronounced dependence of the group delay on the aspect ratio of the holes in the arrays. The maximum group delay occurs near the cut-off frequency of the holes. These experimental results are found to be in good agreement with calculations. The slow propagation of light through the array gives rise to enhancement of the second harmonic generated in the structures. The observed behavior is consistent with the presence of a resonance at the cut-off frequency of the rectangular holes
A Versatile Atom Transport Apparatus for Photonics
No full textThis thesis describes and characterizes a setup to conduct experiments combining the fields of cold atoms and nanophotonics. Furthermore, a series of numerical simulations is employed to deepen of atom transport under experimentally realistic conditions. The study of cold atoms is usually fundamental in nature and a very clean approach to investigate the laws of physics. High purity samples of atoms are cooled down to millikelvins or microkelvins. The potential landscape for the atoms can be carefully controlled using lasers and/or magnetic fields. Since the atoms' responses to electric, magnetic or electromagnetic fields are known with very high fidelity, any deviations to the state the atoms are prepared in can be precisely measured. Nanophotonics is the study of light close to or beyond the diffraction limit. In this region the field-like nature of light starts to play a role. By confining light in sub-wavelength-sized structures, high peak intensities can be achieved, giving rise to exciting non-linear optics phenomena. The strong field gradient that can be created allows, for instance, precise spectroscopy measurements, phase-sensitive sub-wavelength microscopy, as well as producing highly receptive sensing devices. Combining cold atoms and nanophotonics creates strong synergy effects. It gives access to strong coupling of light and matter. The scalability of nanophotonics now extends to atomic physics. Atoms can be trapped, coupled and manipulated at very small length scales, and in large numbers. Moreover, the potential landscape for atoms is highly customizable. The rubidium isotope 87 is used in this setup. A cloud of rubidium atoms is gathered and cooled in a two dimensional magneto-optical trap (MOT). Since the atoms are only cooled in two dimensions, they are free to escape in the third dimension and load a following three dimensional MOT. The atoms are now cooled further, compressed and loaded into an optical dipole trap. This dipole trap transports the atoms close to a sample inside the vacuum chamber. A moving optical lattice, or optical conveyor belt, brings the atoms then close to the sample surface. Now experiments can be conducted, studying the interaction of cold atoms and strongly confined light. The atom transport down to the sample surface shows some unexpected behaviour: the atoms seem to spread through the optical lattice during transport. A combination of microscopic and macroscopic numerical simulations, including genetic algorithms, are used to deepen our understanding of the underlying physics. This also allows us to get access to experimental variables that cannot be directly obtained
Role of hydrogen loading and glass composition on the defects generated by the femtosecond laser writing process of fiber Bragg gratings
No full textThe creation of fiber Bragg gratings (FBGs) in optical fibers by laser irradiation causes the formation of defects in the modified glass. We have used confocal fluorescence spectroscopy to identify the location and types of defects formed after writing FBGs with the femtosecond laser phase mask technique. Our results show that non-bridging oxygen hole centers (NBOHCs) and self-trapped excitons (Eδ’) are formed throughout all-silica core Sumitomo Z-fiber. Similar defects are observed for Ge-doped silica fiber, Corning SMF-28, but in this case the relative concentrations of NBOHC and Eδ’ vary from the core to the cladding. In both fibers, hydrogen loading prior to irradiation appears to passivate the defects except in the Ge-doped core where the NBOHC defects persist
Shock wave loading of a magnetic guide
No full textThe atom laser has long been a holy grail within atom physics and with the creation of an atom laser we hope to bring a similar revolution in to the field of atom optics. With the creation of the Bose-Einstein Condensate (BEC) in 1995 the path to an atom laser was initiated. An atom laser is continues source of BEC. In a Bose condensate all the atoms occupy the same quantum state and can be described by the same wave function and phase. With an atom laser the De Broglie wavelength of atoms can be much smaller than the wavelength of light. Due to the ultimate control over the atoms the atom laser is very interesting for atom optics, lithography, metrology, etching and deposition of atoms on a surface. All previous atom lasers have been created from atoms coupled out from an existing Bose-Einstein Condensate. There are different approaches but common to them all is that the duration of the output of the atom laser is limited by the size of the initial BEC and they all have a low flux. This leaves the quest to build a continuous high flux atom laser. An alternative approach to a continuous BEC beam is to channel a continuous ultra cold atomic beam into a magnetic guide and then cool this beam down to degeneracy. Cooling down a continuous beam of atoms faces three large problems: The collision rate has to be large enough for effective rethermalization, since evaporative cooling in 2D is not as effective as in 3D and a large thermal conductivity due to atoms with a high angular momentum causes heating downstream in the guide. We have built a 4 meter magnetic guide that is placed on a downward slope with a magnetic barrier in the end. In the guide we load packets of ultra cold rubidium atoms with a frequency rate large enough for the packets to merge together to form a continuous atomic beam. The atomic beam is supersonic and when the beam reaches the end barrier it will return and collide with itself. The collisions lowers the velocity of the beam into subsonic velocities and a shock wave is created between the two velocity regions. In order to conserve number of particle, momentum and enthalpy the density of the atomic beam passing through the shock wave must increase. We have build such a shock wave in an atomic beam and observed the density increase due to this. As an extra feature having a subsonic beam on a downward slope adds an extra density increase due to gravitational compression. Loading ultra cold atoms into a 3D trap from the dense subsonic beam overcomes the problem with 2D cooling and thermal conductivity. This was done and evaporative cooling was applied creating an unprecedented large number rubidium BEC
Time-resolved interferometric detection of ultrashort strain solitons in sapphire
No full textWe study one-dimensional nonlinear propagation of high-amplitude acoustic waves in sapphire, for various sample temperatures, sample thicknesses, and pump fluences. Strain waves are generated in a 100-nm-thick chromium film and launched into the sapphire. For temperatures < 60 K , damping can be neglected and propagation is dominated by the nonlinear and dispersive properties of the sapphire substrate. An interferometric technique is used to detect the wave on an epitaxially grown ∼ 20 -nm -thick Cr film at the opposite side of the sample. At the lowest temperature of 18 K, a train of up to seven solitons is detected in sapphire for a pump fluence of 11 mJ / cm 2 . From the soliton amplitudes and velocities, we infer soliton temporal and spatial widths as short as 200 fs and 2 nm. A theoretical analysis based on numerical solution of the Korteweg-de Vries-Burgers equation yields excellent agreement to all experiments presented. Deviations to the direct theoretical result can be explained by pump intensity variations, affecting the (nonlinear) propagation properties
Effect of Cefazolin Treatment on the Nonresonant Raman Signatures of the Metabolic State of Individual Escherichia coli Cells
No full textLaser tweezers Raman spectroscopy (LTRS) was used to characterize the Raman fingerprints of the metabolic states of Escherichia coli (E. coli) cells and to determine the spectral changes associated with cellular response to the antibiotic Cefazolin. The Raman spectra of E. coli cells sampled at different time points in the bacterial growth curve exhibited several spectral features that enabled direct identification of the growth phase of the bacteria. Four groups of Raman peaks were identified based on similarities in the time-dependent behavior of their intensities over the course of the growth curve. These groupings were also consistent with the different biochemical species represented by the Raman peaks. Raman peaks associated with DNA and RNA displayed a decrease in intensity over time, while protein-specific Raman vibrations increased at different rates. The adenine ring-breathing mode at 729 and the 1245 cm−1 vibration peaked in intensity within the first 10 h and decreased afterward. Application of principal component analysis (PCA) to the Raman spectra enabled accurate identification of the different metabolic states of the bacterial cells. The Raman spectra of cells exposed to Cefazolin at the end of log phase exhibited a different behavior. The 729 and 1245 cm−1 Raman peaks showed a slight decrease in intensity from 4 to 10 h after inoculation. Moreover, a shift in the spectral position of the adenine ring-breathing mode from 724 to 729 cm−1, which was observed during normal bacterial growth, was inhibited during antibiotic drug treatment. These results suggest that potential Raman markers exist that can be used to identify E. coli cell response to antibiotic drug treatmen
Negative-index metamaterials: looking into the unit cell
No full textWith their potential for spectacular applications, like superlensing and cloaking, metamaterials are a powerful class of nanostructured materials. All these applications rely on the metamaterials acting as a homogeneous material. We investigate a negative index metamaterial with a phase-sensitive near-field microscope and measure the optical phase as a function of distance. Close to the metamaterial we observe extremely large spatial phase variations within a single unit cell which vanish on a 200 nm length scale from the sample. These deviations of a state-of-the-art metamaterial from a homogeneous medium can be important for nanoscale application
Ultrafast all-optical shutter based on two-photon absorption
No full textAn ultrafast all-optical shutter is presented, based on a simple two-color, two-photon absorption technique. For time-resolved luminescence measurements, this shutter is an interesting alternative to the optical Kerr gate. The rejection efficiency is 99%; the switching-off and switching-on speeds are limited by the pulse length only; the rejection time is determined by the crystal slab thickness; and the bandwidth spans the entire visible spectrum. We show that our shutter can also be used for accurate measurement of group velocity inside a transparent materia
Sound propagation in a Bose-Einstein condensate at finite temperatures
No full textWe study the propagation of a density wave in a magnetically trapped Bose-Einstein condensate at finite temperatures. The thermal cloud is in the hydrodynamic regime and the system is therefore described by the two-fluid model. A phase-contrast imaging technique is used to image the cloud of atoms and allows us to observe small density excitations. The propagation of the density wave in the condensate is used to determine the speed of sound as a function of the temperature. We find the speed of sound to be in good agreement with calculations based on the Landau two-fluid model
- …
